Flash Video Framerate Problem in CS5

I just upgraded from DW CS3 to CS5.
After inserting an .flv on a page, on previewing the page with IE, it looks like the framerate is about 15 fps instead of 30 fps.
If I open the page in CS3 and insert the video, it previews at the normal frame rate and looks great.
I am, unfortunately, an HTML illiterate, and have scraped by for years using only design mode.
I would definitely appreciate any thoughts on this problem.
This particular site has a lot of video content, so I need to solve this or it's back to CS3 for me

How do you know that the fps is 15?
As for a 40 min video being 600MB, that means that "roughly" the video bitrate is 2000kbps (2Mb/sec).
Unless you are just targeting very high-speed Internet connected viewers, that's WAY out of the ballpark for many viewers.
I'd suggest testing first at a much lower video bitrate (500-1000kbps).
Typically Web video problems are related first to too high a video bitrate and only under certain situation, the length of the video. Non the less, it's still a good practice to keep the videos at a reasonable length. It's also important that your media player be able to stop the video file download if you "stop" the video, to prevent the viewer from having to (unwittingly) downloading the entire video file, even if the viewer does not view the entire video. Test some of the players suggested.. but use THEIR suggested code for placing on the page.. not DW.
There should be nothing in DW that changes the fps of a video....period. If there is, then it's because something is broken.
So skip the DW supposedly automagic insert code and code it in by hand, which is probably a better idea anyway (and this comes from a dedicated DW user!)
I'd suggest using swfobject to place your Flash on the page instead of any code that DW suggests. swfobject not only provides for Flash detection, but allows you to provide alternate content for viewers that may not have the Flash pluggin... like the iPhone.:
http://code.google.com/p/swfobject/
so you can play Flash on the iPhone....well sort of...
http://www.cidigitalmedia.com/tutorials/qt/play_qt.html
Best wishes on your project!
Adninjastrator

Similar Messages

Flash Video Playback problem in CS4/CS5

I need to put a Flash Video on my website, embedded in one of the existing html pages.
When my developer puts together a Flash Video in Flash CS4 or CS5 using ActionScript 3, the video does not play - t just keeps buffering (showing a striped appearance on the seek bar) and will not play unless I refresh the browser.
I've tried copying the code from the html page that came with the set of swf and flv files and that doesn't work either.
Just inserting the swf file into the web page like we used to do in CS3 and earlier does not wor.
I noticed that now with ActionScript 3 there is no ACRunActiveContent.js file.
Videos created using CS3 and ActionScript 2 seem to work just fine on web pages.
Wonder what i can do to use CS4 and CS5 videos and have them play on html pages?
Any ideas anyone?

Just to clarify:
Creating a Flash Video swf in CS5 (or even CS4) with ActionScript 3 requires the video to be embedded in the web page a bit differently than we were used to with CS3 and AS2.
While the newer versions of Flash do use a different method (using swfobject) when "Publishing" a Flash .swf, it is NOT required to do so. In fact neither swfobject nor ACRun... are required to display Flash of any version (AS1, 2, or 3) on a Web page. The simple single object method will work just fine:
<object data="path_to_file/file.swf" type="application/x-shockwave-flash" width="insert_width_of_movie" height="insert_height_of_movie">
<param name="movie" value="path_to_file/file.swf">
<param name="SomeOtherParam" value="ParamValue">
</object>
Both ACRun and swfobject are "Flash Detection" methods used to display some alternative content if Flash is not detected... they are NOT needed to simply display the Flash .swf.
However, you can't use half ACRun code and half swfobject code....it must be either one or the other... and either would display AS3 players just fine.... as would the single object method.
Best wishes,
Adninjastrator

Flash video image problem with newest nVidia driver

I've got a very weird display error since the last update. Basically, whenever I play flash video and afterwards close the browser (chromium), any purely black surfaces will display the full flash player image. The effect is only visible in the "first" window of a xmonad tab, that means if I cycle the window positions it will be in a different window. The others are not affected. When I restart X, I can see the flash video image flashing up shortly on the black screen. Restarting X fixes the issue. I cannot take any screenshot of the problem because the error is NOT visible on the screenshot. Therefore I suspect that some frame buffer used for the flash player is not getting cleared properly after exiting the browser, but it's really little more than a wild guess.
As there are multiple components involved, I'm at a loss of where this might be coming from. I hope someone might be able to shed some light on this situation. Please post here if you have the same problem or have any idea why this happens!
My setup:
-nvidia 260.19.36-2
-flashplugin 10.2.152.27-1
-chromium 9.0.597.94-1
-xmonad 0.9.2-1
-xmonad-contrib 0.9.2-1
Last edited by Natanji (2011-02-15 11:33:11)

Natanji wrote:Thanks, that seems like it helped. So this is a flashplayer bug? Was it already reported?
if you asking about a bug reported on arch linux bugtracker, then you are doing it the wrong way.
flash and nvidia are closed source, we can't do anything. A better place is to submit bugs to nvidia and adobe.
Now i see that nvidia 270.26 was released. Maybe you want to check that out:
http://www.nvnews.net/vbulletin/showthread.php?t=159683

Snapz Pro to Final Cut to Flash Video - Resolution Problems

For my student job I'm supposed to make web video and I have a guidebook that explains how to do it. However, I have found some problems that have screwed up some things.
So I have captured video from Snapz Pro and I did this by setting the display resolution at 800x600 so that text can be readable. Now I set my selection capture at the same setting so that my final .mov file is 800x600 with good readable text.
The issue is when I get into FCP HD 4.5!
My final output is 480x320 MPEG-4 for flash video.
My guidebook tells me to set the sequence setting to 480x320, square pixels and MPEG-4 Video.
The problem is that when I bring in the 800x600 .mov file, I have pixelation problems and the video quality is markedly decreased.
I haven't been able to figure out the best approach but I need to change something for sure.
Any tips or ideas?

You in the same class with Timothy Mosbach by any chance?
Anyway, Timothy and I went through this exact issue in this thread:
http://discussions.apple.com/message.jspa?messageID=3493859#3493859

I'm sooo close I can feel it: Flash Video upload problem

Hello all,
I searched this topic and found plenty of articles but most were unanswered.
Issue: I can play a flash video locally in dreamweaver MX by pressing F12 but not when I upload it to the server.
          The site below shows that only the player controls show but nothing else.
Here's the Site:
http://www.servicetoself.com/landing_pages/itsnotweightloss/itsnotweightloss.htm
Note: I uploaded all files that were created with Adobe flash into the site folder of the specific page (not the root directory of my site) including
        1. The swf (which works fine when i double click on it)
        2. The AC run active file
        3. the fla file
        4. the htm (created by adobe flash)
        5. the flv file
        6. the skin control file
These files are all in the path servicetoself/landing_pages/itsnotweightloss both locally and on the server
My Idea: It seems as the the swf file may not be pointing correctly to the flv. I found in other posts that I have to put the URL into the swf but have no idea how to do that. I don't see a "content path" parameter in the component inspector and have no idea how to get to it. but maybe this isn't what I need to do to fix it.
Any help would be greatly appreciated

Select the FLVPlayer component on the stage. Open the Component Inspector window. In the Parameters tab the Content Path will be the fifth item down the list. Alternately, in versions before CS4, you can use the Parameters tab in the Properties window and find the same Content Path.

Video framerate problem

There is problem when trying to play ntsc videos (29.97 fps - video ormats h264 mp4-flv-f4v-mov), it drops some frames and stuttering video. So, flex video components has a default video frame rate? i think it is only reading 24 frames , not reading other frames and so stuttering.
Tried it with s:videodisplay, mx:videodisplay, flash.media.Video, org.osmf.elements.VideoElement components and all of it the result is same it is not playing ntsc videos with real frame rates and stuttering. Also tested different videos.
Worked on Adobe Flash Builder 4.6 (Air 3.5)
System information,
W7 Enterprise,
C2Duo 2.53 Ghz,
512 Graphic
4 GB Ram

How do you know that the fps is 15?
As for a 40 min video being 600MB, that means that "roughly" the video bitrate is 2000kbps (2Mb/sec).
Unless you are just targeting very high-speed Internet connected viewers, that's WAY out of the ballpark for many viewers.
I'd suggest testing first at a much lower video bitrate (500-1000kbps).
Typically Web video problems are related first to too high a video bitrate and only under certain situation, the length of the video. Non the less, it's still a good practice to keep the videos at a reasonable length. It's also important that your media player be able to stop the video file download if you "stop" the video, to prevent the viewer from having to (unwittingly) downloading the entire video file, even if the viewer does not view the entire video. Test some of the players suggested.. but use THEIR suggested code for placing on the page.. not DW.
There should be nothing in DW that changes the fps of a video....period. If there is, then it's because something is broken.
So skip the DW supposedly automagic insert code and code it in by hand, which is probably a better idea anyway (and this comes from a dedicated DW user!)
I'd suggest using swfobject to place your Flash on the page instead of any code that DW suggests. swfobject not only provides for Flash detection, but allows you to provide alternate content for viewers that may not have the Flash pluggin... like the iPhone.:
http://code.google.com/p/swfobject/
so you can play Flash on the iPhone....well sort of...
http://www.cidigitalmedia.com/tutorials/qt/play_qt.html
Best wishes on your project!
Adninjastrator

Flash Video Gallery Problem

Hi All
I am developing a video Gallery in AS 3.0.
* I am providing thumbnails and XML is loading external FLvs
in those thumbnails .
* The user can either double click or click and drag
thumbnail to play the main video above the particular line.
* I am calling external SWFs in the UIloader component for
playing the main video. That UIloader will be called when the user
either double clicks on thumbnail or click and drag the thumbnail.
* Also user can drag the main video wherever he wants, and
he can drop the main back to the thumbnails too( which will unload
the video player).
My problem is that everything is working fine when i run the FLA
file, but when i closed my application and try to run the
individual SWF file, the file does not work ( its just
crashing).
There are no frames I am using so that's for sure that i did
not forget to put stop frame.
All of my code is in the main time line and I haven't used
any custom classes yet, which means everything is in the actions
window.
Am i using the right tool for such a big application? Should I
switch to FLEX for compiling this file. i am not that familiar with
FLEX working environment too.
Please help me out what i am doing wrong and i apologize that
I could not mail you the code because the file is very very big.
Also if any better tool is available for this please let me
know.
Any kind of help will be highly appreciated.
Thanks a lot
Anuj

Interesting problem.
I thought initially that this could be easily solved with Action Sequences on the imported SWF file. Action Sequences will control the visibility, play(), stop() and go to frame, it doesn't stop the audio that has already started playing in the imported SWF.
I worked around this by
placing an empty frame "0" in my Flash .fla with SoundMixer.stopAll(); in the ActionScript - then reoutput the SWF
Imported the SWF and then set an ActionSequence to go to Frame 0 and Stop when I exited the state where I wanted my SWF playing
Also set an ActionSequence to go to Frame 0 and Play when I wanted my SWF to start playing again
See the source .fla and .fxp here: TestingSwfSoundStopStart.zip
Best wishes,
Tanya

Flash video component problem

I used Flash CS3 to create an .swf that links to a .flv and
plays in a video component. When I upload it to my website created
in Dreamweaver MX, the video plays, put the component does not
appear.
My question is this: Is the Flash CS3 video component
compatible with Dreamweaver MX?
thanks,
JMH

Have you tried adding a "trace" message to let you know when cue point is reached?
Have you tested the functions separately to varify that they work?
Also I wonder about using
if(evt.info.name == "01CreditIn")
The .info part...
Here's a working example that on a certain "event" type cue point, fires a trace message and then loads a second movie
ns.onCuePoint = function(evt:Object){
    trace(evt.name);
    trace(evt.time);
    if(evt.name == "play_vid1") {
        trace("YO!Loading wide_holder!");
        wide_holder.loadMovie("rm/images/black_bear.swf");
    if(evt.name == "play_vid2") {
trace("YO!Loading standard_holder!");
        standard_holder.loadMovie("rm/images/sqis.swf");
Perhaps you can glean something from this.
Best wishes,
Adninjastrator

Problem with Flash video/dropdowns in Mozilla

Am trying to add a flash video to a webpage using a
Dreamweaver extension called Active Slideshow Pro by DMXZone.
The page can be viewed: www.faith.org.uk/Testindex.html
In IE7 it works fine. The video shows and the dropdowns of
the menu work correctly.
In Mozilla Firefox the video works but the dropdowns do not
show.
If I remove the block of coding which is generated by the
DMXZone extension:
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0"
width="514" height="129" id="testshow" align="middle">
<param name="FlashVars"
value="xmlFile=testshow.xml&preloaderBackColor=0x0099FF&preloaderBorderColor=0xCCCCCC"
/>
<param name="movie" value="slideshowpro.swf" />
<param name="quality" value="best" />
<param name="scale" value="noscale" />
<param name="wmode" value="transparent" />
<param name="bgcolor" value="#000000" />
<embed src="slideshowpro.swf" id="testshow"
wmode="transparent" quality="best"
flashvars="xmlFile=testshow.xml&preloaderBackColor=0x0099FF&preloaderBorderColor=0xCCCCCC "
scale="noscale" bgcolor="#000000"
type="application/x-shockwave-flash" width="514" height="129"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
The page works in both browsers and the menu dropdowns appear
correctly.
I would be most grateful for anyone's advice on this.

A discussion with Adobe support lends the idea that MPEG
layer 4 might be an issue. That since these videos come from DVD
perhaps encoded with MPEG layer 4 that that could be the reason tha
all of them have this problem. (Some were done using AVI - I have
to check and see if that makes a difference)
BUT
According to the PDF from Adobe Design - Flash Video Encoder
Wizard - By Tom Green and Jordan L. Chilcott
Flash should be able to convert an MPEG4 file. (Well it does
but they all stop after 30 sec.) Now how do I solve this problem?
All the videos still stop after 30 sec.s
quote snip snip>>
Flash Video Encoder Wizard
By Tom Green and Jordan L. Chilcott
The first thing you have to understand about the use of video
in Flash® is the original
video must be converted to a format Flash can read. This
format is FLV (Flash Video)
and you can either use Flash, the Flash Video Encoder, or
third-party software to
create the FLV file. If you use video-editing software such
as Adobe® After Effects®,
you can also export the file as a FLV file. If you are a
Dreamweaver® user, the current
version of Dreamweaver—Dreamweaver 8—contains a
feature that allows you to add
an FLV at the click of a button.
The purpose of the Encoder, therefore, is to convert the
video file to the FLV format.
When you installed Flash Professional 8, the Flash Video
Encoder application was
also installed on your machine. If you also have QuickTime,
Adobe After Effects,
Avid Studio, or Final Cut Pro installed on your machine,
they, too, were given the
capability to use the Encoder when it was installed.
If you will be converting a video to the FLV format, the
video must be in one of
these formats:
• AVI—Audio Video Interleave
• MOV—QuickTime 4 or later
• MPEG—Motion Picture Experts Group

Problem with Flash video in webpage

I've encoded a number of videos in the FLV format(using both
Flash Video encoder and Quicktime), using standard preset settings,
inserted in webpage using dreamweaver standard - Insert Media -
Flash Video. When I try to play the videos, online or testing in
browser, the video does not play the whole way through. It'll play
15 sec into the video and then stop, although it seems to have some
of the rest of the video if you play around with the controller.
I've looked on the Flash encoding forum (other people have the same
problem) and looked on the site for more info but cannot find
any.

Have you checked to see if the FLV is the same size on the
server as your
local copy?
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"malton05" <[email protected]> wrote in
message
news:f6e7ke$dig$[email protected]..
> I've encoded a number of videos in the FLV format(using
both Flash Video
> encoder and Quicktime), using standard preset settings,
inserted in
> webpage
> using dreamweaver standard - Insert Media - Flash Video.
When I try to
> play the
> videos, online or testing in browser, the video does not
play the whole
> way
> through. It'll play 15 sec into the video and then stop,
although it seems
> to
> have some of the rest of the video if you play around
with the controller.
> I've
> looked on the Flash encoding forum (other people have
the same problem)
> and
> looked on the site for more info but cannot find any.
>

Problem with Flash videos. They are only display in "Private Browsing" mode, in Safari 5.1.7

The symptoms is: The flash videos are only display with a full red bar and nothing happen, no video no sound nothing. The Flash player was upgrade with 11.2.202.235. before safari 5.1.7. I have an iMac with SL, and a Macbook with SL too. However after I upgraded safari 5.1.7 the flash videos are not display correctly, (only videos). The same happen in both computers.
I need to tell you that I follow all the possible recommendations that I founded in internent. I uninstall flash pug-in many times. I restore both. I switch many buttons and options like "reset safari", "empty cahe", "block pop-up windows", "enable java-script", "enable java". I turn off and on the firewall. I switch all the options in the flash player plug in preferences. And nothing. I turn on and off the plug ins. In fact I tried all the possibilities in the preferences menus from the programs.
In one occasion I had a glimpse of functionality for only one hour without problems after I reinstall safari from the Apple website, but only worked until I turned off the computer. The next day was the same problem.
After I fought with safari 5.1.7 and the plug-in flash player 11.2.202.235. Now I noticed something wired, only when I switch the "Private browsing" option in safari is when the videos are displayed correctly.
The same videos work perfectly in Firefox.
Some Suggestions?

Thank you everybody, the problem was corrected in a unexpected way, I decided no to pay attention to the problem after a week fighting with that. I was navigating in a private browsing for two days. I turned the private browsing off again the next Monday, after a week I noticed that all the videos were display correctly, I do not have the problem again. That was wired because at the same time in the laptop everything is ok too. I have my extensions ON, Block Pop-up windows, In Flash payer all the options in ask....something. Only the option Disable Java script in not activated, only when I activate that option all videos are not display.
I think maybe I updated the computer and maybe something happened in the middle. I always update my imac and my macbook at the same time. There is a Flash removal security update in may 14. Maybe that fixed the problem.
Thanks to everybody, everything is ok now however I wanted to know what was the problem.

Flash Video problem on Adobe Connect 9

Hi Folks
having an issue I am hoping to get some light shed on - I am downloading content from an Adobe Connect 8 server and uploading to Adobe Connect 9 server in a seperate domain. All has been working fine except for Flash Videos - anytime I upload a flash video (FLV) format and attemt to access it eitehr directly on the server or remotly get a grey screen. Is there any particular add ons required to enable flash video to work with Adobe Connect 9 , using Flash 10, OS is Windows 2008 R2
thanks in advance
Paul C

Nope. Looks good though and glad you got it sorted.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Nancy - Adobe Comm. Expert" <[email protected]> wrote
in message
news:f6efg8$mqv$[email protected]..
> Okay .. my problem turned out to be a mimetype that
needed to be added on
> the server at CrystalTech. They added it and now my
Flash Video works. I
> have added Flash video to many CrystalTech accounts in
the past and this
has
> never happened. I am not sure why it wasn't already on
this account as
this
> was a premium account .. I guess I should have gotten
the cheap one. :)
>
> Have others had this problem with their hosts? I wasted
a couple of hours
> thinking the problem was me and it was not.
>
> Nnacy
>
>

Problems with Flash video streaming in any Browser (Windows 8.1)

Hello.
Since maybe the last Chrome update (to version 42.0.2311.90 m - I tried both 32 and 64 bits versions) or some Windows 8.1 updates (I don't know for sure), flash videos don't even start to buffer - they only play after the full content is downloaded (or loaded in the site's player) . So, If I try to watch a video from a Flash Player based interface (like Dailymotion, or Vimeo), I have no streaming, and I have to wait a long time, watching a "1%" or a load wheel until the full content is available to watch.
This is happening with all browsers, not only Chrome (IE and Firefox too). I tried to update flash player (first, version 17,0,0,169 and then tried the beta, the one released April 14, 2015). No difference at all. So, I think this might be a problem with the flash player itself, or with some Windows settings.
So, lets go to the facts:
- That happened suddenly for no apparent reason - one day it was working, and on the other day it wasn't;
- I have the latest versions of all browsers I use (Chrome, IE and Firefox);
- My Flash Player version is, currently, the latest version;
- I tried old Flash Player versions. didn't work;
- This is not happening with HTML5 video players, like Youtube, so i think it's not a codec problem;
- I have the latest nVidia graphics driver. And it was happening even before I update the driver (I have a GeForce GTX 770);
- I tried disabling the hardware acceleration on Flash settings, nothing happened;
- I use default Windows Firewall and Defender. Tried to disable firewall, nothing happened;
- I had searched all over the internet for the answer, but I can't find it. I already did all what the troubleshoot pages from Adobe said to do;
- My internet connection is fine. It's a fast connection, and It's on wireless. I have several PCs connected to this network and flash videos work fine with them, only in this specific machine isn't;
- I tried uninstall flash player and install again several times, with several different versions. Didn't work;
- Tried disable different versions of flash player on Chrome too, nothing happened.
The thing is, I can imagine that this might not be only a flash player problem, but since it's the only plugin problem I have, I thought that you might have the answer.
Thank you.

Please work through the video troubleshooting guide.
https://helpx.adobe.com/flash-player/kb/video-playback-issues.html
If you're still stuck, please follow the directions in the guide on providing the dxdiag report and additional information about what you tested and saw.

Adobe flash video problem

For the last couple of weeks i have run into a problem with both U-Tube videaos and yahoo vodeos.
In the middle of the videao a pop-up comes on from either of two entities s.ytimg and d.yimg.
There is a lot of dialogue about this (per google search) but I still don't know if it a virus/malware, or an intrusive adverising site.
Adobe has very vague info on this (they disclaim having anything to do with it) but to me it is unreasonable for U-tube (google) or yahoo to actuallyendorse this .
I never click allow, but the thing is insistant and does not go away.
Any help?

Thanks for the added information, but that doesn't alter the fact that Firefox is seriously crippled -- that is to say, useless -- as a medium for web video.
I don't know whether the assertion that Flash 11.3 is "buggy" and it is Adobe's fault is more true, than to say that Firefox 20+ is "buggy" with regard to Flash 11.3.
It seems both developer teams are pointing in the other direction to claim "It's their fault, not ours" and using that as an excuse not to fix the problem.
Since it is unlikely that the complaints of Firefox users is going to move Adobe to "fix" Flash, it seems to me much clearer that it is the obligation of Mozilla to fix Firefox so that it works with Flash.
Again, this problem has gone on for sufficient years, anyone would conclude that Mozilla should have fixed it by now.
What is even more annoying, is the way that Mozilla representatives who should know better, send people who report this problem and quite reasonably ask for a solution, off on 15 dozen different kinds of fools' errands for "solutions" that don't address the problem that anyone with any experience realizes is a basic conflict between Flash 11 and any FF version much beyond 18 or so.
There needs to be a consolidation of all the many different threads addressing this problem with a top-level advisory that all the proffered sub-fixes (blaming this or that setting or plug-in) is really NOT going to solve the fundamental Flash-Firefox video incompatibility.
We FF users are left with the unacceptable choice of abandoning access to Flash videos if we want to continue using FF for all its other capabilities and special features -- or we have to constantly be uninstalling Flash 11, installing Flash 10, watch our videos, then uninstall Flash 10 and reinstall Flash 11 to do anything else.
This is ridiculous.
When is Mozilla going to acknowledge and fix this problem?

Flash Video problem on one particular website.

I am trying to play Progressive Download video on a website.
I do this
at least 20 times a month .. no issues. This one site will
not show up and
I have redone the page approx. 20 times with no results in
any browser.
The page is in my root .. the FLV is in a folder called video
.. the script
is in the Scripts folder. The ProgressiveFLV and skin swfs
are in the main
folder.
I use an identical configuration on other sites on the same
server with no
problem. It tests perfectly in localhost. But nothing shows
up on the
server.
and YES .. I DID FTP the scripts folder. I solve this problem
for people
every day of the week .. but I can't get this site to work.
Any thoughts?
http://www.otglifestyle.com/video1.html
On the last attempt, it actually crashed Firefox .. anyone
know what is
going on here?
Thanks!
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development

Nope. Looks good though and glad you got it sorted.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Nancy - Adobe Comm. Expert" <[email protected]> wrote
in message
news:f6efg8$mqv$[email protected]..
> Okay .. my problem turned out to be a mimetype that
needed to be added on
> the server at CrystalTech. They added it and now my
Flash Video works. I
> have added Flash video to many CrystalTech accounts in
the past and this
has
> never happened. I am not sure why it wasn't already on
this account as
this
> was a premium account .. I guess I should have gotten
the cheap one. :)
>
> Have others had this problem with their hosts? I wasted
a couple of hours
> thinking the problem was me and it was not.
>
> Nnacy
>
>

Flash Video Framerate Problem in CS5

Similar Messages

Maybe you are looking for