Flat file to XML Document

Hi,
I have a requirement where i have to process a flat file and create an XML document out of it. This XML is turn has to conform to schema. Can this be done in ODI? If yes, what is the knowledge module I should be using to achieve this? Further, how do I create the data model for the XML, and how do i specify the directory where the file needs to be written to? I hear that there is an IKM by the name "SQL to XML IKM" desinged to genereate XML from database. Can anyone please forward it to me? My mail address is [email protected] Any help is greatly appreciated.
Edited by: Sankash on 01-Apr-2009 07:19

Refer to this thread.
Re: ODI with XML
It will guide you thru the process at a high level.
Thanks
CJ
Please do remember to assign points (Helpful / Correct) accordingly to the thread before closing, that encourage people to help you more quickly and effectively.

Similar Messages

Convert flat file to XML document and store into Oracle database

First:
I have a flatfile and created external table to read that file in Oracle
Now I want to create an XML document for each row and insert into Oracle database, I think that XMLtype.
Could you please provide me some information/steps.
Second:
Is there performance issues, because everyday I need to check that XML document stored in the database against the in coming file.
Thank You.

Oracle 11g R2 Sun Solaris
Flat file is | (pipe delimited), so I did create an EXTERNAL Table
row1     a|1|2|3|4
row2     b|2|3|4|5
row3     c|6|7|8|9
I want to store each record as XML document. So it will be easy to compare with next day's load and make insert or update.
The reason is:
     First day the file comes with 5 columns
     after some days, the file may carry on some additional columns more than 5
     In this case I do not want to alter table to capture those values, if I use XML than I can capture any number of columns, CORRECT!. Please make me correct If I am wrong.
     This is the only reason to try to use the XMLType (XML Document)
     On Everyday load we will be matching these XML documents and update it if there is any column's value changes
daily average load will be 10 millions and initial setup will be 60-80 millions
     Do I have anyother option to capture the new values without altering the table.
Please advise!.

Error in Flat File to XML conversion

Hi all,
I am trying to convert a flat file to XML using the Sender File Adapter and I am getting the following error message.
2006-01-23 17:23:00 EST: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR converting document line no. 2 according to structure 'GL_FileUpload_SAPECC_Header_DT1':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified!
My flat file looks like this,
--Start
GL,GLI,1,RefTest,4011,Test,1234567890,12032005,12032005,GL,RK
GL,GLI,4011,3011,,,,,,AU,600,7000,8000,9000,5000,RK,,,,,,,,,,,,,,,,,,,,
---End
The adapter configuration is like this:
Document Name: GL_FileUpload_SAPECC_Item_MT1
Document Namespace: urn:corptech.qld.gov.au:sss_std_offering:gl
RecordSet Name: GL_FileUpload_SAPECC_Record_DT1
RecordSet Namespace: urn:corptech.qld.gov.au:sss_std_offering:gl
RecordSet Structure: GL_FileUpload_SAPECC_Header_DT1,1,GL_FileUpload_SAPECC_Item_DT1,*
RecordSet Sequence: Ascending
Key FieldName: TransType
On the Adapter Properties, I have got:
--Start
GL_FileUpload_SAPECC_Header_DT1.fieldNames: TransType,RowType,SequenceNo,ReferenceKey,SenderSystem,HeaderText,CompanyCode,DocumentDate,PostingDate,DocumentType,ReferenceNo
GL_FileUpload_SAPECC_Header_DT1.fieldSeparator: ,
GL_FileUpload_SAPECC_Item_DT1.fieldNames: TransType,RowType,SequenceNo,GLAccount,CostCentre,ProfitCentre,InternalOrder,WBSElement,TaxCode,Currency,GLAmount,VendorAmount,CustomerAmount,AssetAmount,DRCR,ItemText,VendorNo,CustomerNo,Name,Street,City,PostCode,PoBox,State,Country,BankKey,BankAccount,BankCountry,CalcTax,PaymentTerms,BaseDate,PaymentBlock,PaymentMethod,Assignment,AssetNo,AssetSubNo,AssetTransaction
GL_FileUpload_SAPECC_Item_DT1.fieldSeparator: ,
ignoreRecordsetName: true
GL_FileUpload_SAPECC_Header_DT1.keyFieldValue: GL
GL_FileUpload_SAPECC_Item_DT1.keyFieldValue: GL
---End
The structure defined on the data type looks like this,
--Start
GL_FileUpload_SAPECC_Record_DT1   Complex Type
   GL_FileUpload_SAPECC_Header_DT1 Element
      TransType                     Element
      RowType                       Element
      Sequence Number               Element
    GL_FileUpload_SAPECC_Item_DT1   Element
      TransType                     Element
      RowType                       Element
      Sequence Number               Element
      GLAccount                     Element
---End
Any help or suggestion please.
Thank you.
Warm Regards,
Ranjan

Hi, Ranjan.
First of all, let's look at the meaning of the error.
> ...Exception: ERROR converting document line no. 2 according to
> structure 'GL_FileUpload_SAPECC_Header_DT1':java.lang.Exception:
> ERROR in configuration: more elements in file csv structure than
> field names specified!
It seems that XI interpreted 2nd line as
Header_DT1 not as Item_DT1 that you meant.
> GL,GLI,4011,3011,,,,,,AU,600,7000,8000,9000,5000,RK,,,,,,,,,,,,,,,,,,,,
That's why it says this line has more elements than the structure
defined(Header_DT1)
And the reason why XI misinterpreted the above as Header is that
you used keyFieldValue with the same value.
> ...Header_DT1.keyFieldValue: GL
> ...Item_DT1.keyFieldValue: GL
According to the following help,
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
it says like the following.
Key Field Name
If you specified a variable number of substructures for Recordset
Structure, in other words, at least one substructure has the value
*, then the substructures must be identified by the parser from
their content. This means that a key field must be set with different
constants for the substructures. In this case, you must specify a key
field and the field name must occur in all substructures.
How about using different constants for header and item if possible?
Good luck.

Flat File to XML mapping Problem

I am facing some issues in mapping from flat file to XML. I have not reached to the stage of actually executing the scenario and the problem has not advanced beyond mapping tests.
Following are structures of inbound flat file (as specified in content conversion parameters of sender adapter)
Document Name          MMADealerStatementInbound_MT
Recordset Name          MMADealerStmtInbound_Type
Recordset Structure 
BatchHeader,1,DealerHeader1,,DealerHeader2,,DealerDetail,,DealerAgeing,,Trailer,1
Recordset Sequence           Ascending
Key Field Name          RecordType
Key Field Type               String (Case Sensitive)
Following are structures of Outbound XML file needed
All DealerDetail nodes are lumped together in first DealerStmt nodes. They need to be distributed across many DealerStmt nodes.
Company          CompanyName                    25
Company          CompanyAddress          StreetAddress     Company Street Address     50
Company          CompanyAddress          City     Company City     40
Company          CompanyAddress          State     Company State     3
Company          CompanyAddress          ZIP     Company ZIP     10
Company          CompanyAddress          Country     Company Country     3
Company          RunParams          RunDate     Statement Run date     8
Company          RunParams          StmtPeriod     Statement Period     20
DealerStmt     0-unbounded     DealerNumber                    10
DealerStmt     0-unbounded     DealerName                    35
DealerStmt     0-unbounded     DealerAddress          StreetAddress     Dealer Street Address     50
DealerStmt     0-unbounded     DealerAddress          City     Dealer City     40
DealerStmt     0-unbounded     DealerAddress          State     Dealer State     3
DealerStmt     0-unbounded     DealerAddress          ZIP     Dealer ZIP     10
DealerStmt     0-unbounded     DealerAddress          Region     Dealer Region     4
DealerStmt     0-unbounded     DealerRemitToAddress          CompanyName     Company Name     50
DealerStmt     0-unbounded     DealerRemitToAddress          StreetAddress1     Street Address 1     50
DealerStmt     0-unbounded     DealerRemitToAddress          StreetAddress2     Street Address 2     50
DealerStmt     0-unbounded     DealerRemitToAddress          StreetAddress3     Street Address 3     50
DealerStmt     0-unbounded     DealerDetail     0-unbounded     DocDate     Document Date     8
DealerStmt     0-unbounded     DealerDetail     0-unbounded     InvoiceNumber     Invoice Number     10
DealerStmt     0-unbounded     DealerDetail     0-unbounded     TransDescription     Transaction Description     50
DealerStmt     0-unbounded     DealerDetail     0-unbounded     TransAmount     Transaction Amount     16
DealerStmt     0-unbounded     DealerDetail     0-unbounded     AmountSign     Amount Sign     1
DealerStmt     0-unbounded     DealerAgeing          CurrentBal     Current Balance     15
DealerStmt     0-unbounded     DealerAgeing          Bal1to31days     Balance 1 to 31 Days     15
DealerStmt     0-unbounded     DealerAgeing          BalOver31     Over 31 days Old     15
DealerStmt     0-unbounded     DealerAgeing          BalOver61     Over 61 days Old     15
DealerStmt     0-unbounded     DealerAgeing          BalOver92     Over 92 days Old     15
DealerStmt     0-unbounded     DealerAgeing          BalOver123     Over 123 days Old     15
Trailer          DealersCount                    5
Trailer          TransCount                    10
Trailer          TotalAmount                    20
Here is the mapping I used for this node.
/ns0:MMADealerStatementOutbound_MT/MMADealerStmtOutbound_Type/DealerStmt/DealerDetail=ifWithoutElse(stringEquals(/ns0:MMADealerStatementInbound_MT/MMADealerStmtInbound_Type/DealerDetail/RecordType=, const()), SplitByValue(/ns0:MMADealerStatementInbound_MT/MMADealerStmtInbound_Type/DealerDetail=))
My email address is [email protected] and i can send some screen shots to understand better.
I need help of XI mapping Gurus.
Thanks
Rajesh

HI,
Possible mention the source Message/Data Type and Target Data Type and Mapping Rules reuired. Then I think it may be useful to give some hints.
btw , What is the error in Mapping ?
Regards,
Moorthy

CONVERTION OF FLAT FILE TO XML : NO OUT PUT FOUND

Hi XI Experts,
                   I am not getting output while creating a scenario of flat file to xml file. I have set the file content conversion parameter correctly...the file which is .txt is picking up but I m not getting the file in the output directory.
CAN ANYONE HELP ME.....PLS!!!
Thanks in advance...

Hi,
            The follwoing is the mapping str I created and also I have pasted the FCC parameters,
I want to send the .txt file which contains the data as
Sunil,Bangalore
Shetty,Bangalore
( for multiple records..)
Note : I m getting the o/p for single records...
Pls help me.....
Sender                                                  Target
Record                                           Record
   Row                                                  Row
      Name string 1..unbounded --->        Name string 1..unbounded
      Addr string 1..unbounded --->          Addr string 1..unbounded
Source Dir : c:/send
File Name : send.txt
Document Name      : Message type name
Document Namespace : urn:....
Recordset Name     : Record
Recordset Structure: Row,*
Row.fieldNames           : Name,Addr
Row.fieldSeparator       : ,
Row.processConfiguration : FromConfiguration
Row.endSeparator         : 'nl'
Thanks in Advance....

Flat file to XML

Hi guys,
Anyone knows standard functions to convert a flat file to XML? Or maybe from an internal table to XML.
Thanks in advance,
Ricardo.

Hello ricardo,
Check this sample:
*& Report ZULH_MM_RP_XMLtest001
REPORT ZULH_MM_RP_XMLtest001.
PARAMETERS: GK_RUTA TYPE RLGRAP-FILENAME DEFAULT 'C:test01.XML'.
* TYPE TURNOS *
TYPES: BEGIN OF TURNOS,
    LU LIKE T552A-TPR01,
    MA LIKE T552A-TPR01,
    MI LIKE T552A-TPR01,
    JU LIKE T552A-TPR01,
    VI LIKE T55AA-TPR01,
    SA LIKE T552A-TPR01,
    DO LIKE T552A-TPR01,
END OF TURNOS.
* TYPE TURNOS *
* TYPE SOCIO *
TYPES: BEGIN OF SOCIO,
    NUMERO LIKE PERNR-PERNR,
    REPOSICION LIKE PA0050-ZAUVE,
    NOMBRE LIKE PA0002-VORNA,
    TURNOS TYPE TURNOS,
END OF SOCIO.
* TYPE SOCIO *
* ESTRUCTURA ACCESOS *
DATA: BEGIN OF ACCESOS OCCURS 0,
    SOCIO TYPE SOCIO,
END OF ACCESOS.
* ESTRUCTURA ACCESOS *
* START OF SELECTION *
START-OF-SELECTION.
    PERFORM LLENA_ACCESOS.
    PERFORM DESCARGA_XML.
END-OF-SELECTION.
* END OF SELECTION *
* FORM LLENA_ACCESOS *
FORM LLENA_ACCESOS.
REFRESH ACCESOS.
CLEAR ACCESOS.
MOVE: '45050' TO ACCESOS-SOCIO-NUMERO,
              'MOISES MORENO' TO ACCESOS-SOCIO-NOMBRE,
              '0' TO ACCESOS-SOCIO-REPOSICION,
              'T1' TO ACCESOS-SOCIO-TURNOS-LU,
              'T2' TO ACCESOS-SOCIO-TURNOS-MA,
              'T3' TO ACCESOS-SOCIO-TURNOS-MI,
              'T4' TO ACCESOS-SOCIO-TURNOS-JU,
              'T5' TO ACCESOS-SOCIO-TURNOS-VI,
              'T6' TO ACCESOS-SOCIO-TURNOS-SA,
              'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
CLEAR ACCESOS.
MOVE: '45051' TO ACCESOS-SOCIO-NUMERO,
              'RUTH PEÑA' TO ACCESOS-SOCIO-NOMBRE,
              '0' TO ACCESOS-SOCIO-REPOSICION,
              'T1' TO ACCESOS-SOCIO-TURNOS-LU,
              'T2' TO ACCESOS-SOCIO-TURNOS-MA,
              'T3' TO ACCESOS-SOCIO-TURNOS-MI,
              'T4' TO ACCESOS-SOCIO-TURNOS-JU,
              'T5' TO ACCESOS-SOCIO-TURNOS-VI,
              'T6' TO ACCESOS-SOCIO-TURNOS-SA,
              'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
ENDFORM.
* FORM LLENA_ACCESOS *
* FORM DESCARGA_XML *
FORM DESCARGA_XML.
DATA: L_DOM TYPE REF TO IF_IXML_ELEMENT,
              M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
              G_IXML TYPE REF TO IF_IXML,
              W_STRING TYPE XSTRING,
              W_SIZE TYPE I,
              W_RESULT TYPE I,
              W_LINE TYPE STRING,
              IT_XML TYPE DCXMLLINES,
              S_XML LIKE LINE OF IT_XML,
              W_RC LIKE SY-SUBRC.
DATA: XML TYPE DCXMLLINES.
DATA: RC TYPE SY-SUBRC,
BEGIN OF XML_TAB OCCURS 0,
              D LIKE LINE OF XML,
END OF XML_TAB.
CLASS CL_IXML DEFINITION LOAD.
G_IXML = CL_IXML=>CREATE( ).
CHECK NOT G_IXML IS INITIAL.
M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
CHECK NOT M_DOCUMENT IS INITIAL.
WRITE: / 'Converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
EXPORTING
              NAME = 'ACCESOS'
              DATAOBJECT = ACCESOS[]
IMPORTING
              DATA_AS_DOM = L_DOM
CHANGING
              DOCUMENT = M_DOCUMENT
EXCEPTIONS
              ILLEGAL_NAME = 1
              OTHERS = 2.
IF SY-SUBRC = 0.
              WRITE 'Ok'.
ELSE.
              WRITE: 'Err =',
              SY-SUBRC.
ENDIF.
CHECK NOT L_DOM IS INITIAL.
W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
IF W_RC IS INITIAL.
              WRITE 'Ok'.
ELSE.
              WRITE: 'Err =',
              W_RC.
ENDIF.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
              DOCUMENT = M_DOCUMENT
IMPORTING
              XML_AS_STRING = W_STRING
              SIZE = W_SIZE
TABLES
              XML_AS_TABLE = IT_XML
EXCEPTIONS
              NO_DOCUMENT = 1
              OTHERS = 2.
IF SY-SUBRC = 0.
              WRITE 'Ok'.
ELSE.
              WRITE: 'Err =',
              SY-SUBRC.
ENDIF.
LOOP AT IT_XML INTO XML_TAB-D.
              APPEND XML_TAB.
ENDLOOP.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
              BIN_FILESIZE = W_SIZE
              FILENAME = GK_RUTA
              FILETYPE = 'BIN'
TABLES
              DATA_TAB = XML_TAB
EXCEPTIONS
              OTHERS = 10.
IF SY-SUBRC <> 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Regards,
Vasanth

Flat file to XML in SAP SFTP adapter

Hello All
I am trying to convert flat file to xml using SAP SFTP adapter.
Flat File is like below:
AABEN;20141106;20141106;45;0.00
AABOL;20141106;20141106;45;0.00
ABGRI;20141106;20141106;45;0.00
ADDEA;20141106;20141106;45;0.00
ALADA;20141106;20141106;45;58.43
AMSCH;20141106;20141106;45;0.00
ANOLV;20141106;20141106;45;0.00
ANROY;20141106;20141106;45;0.00
AVMCD;20141106;20141106;45;0.00
Message Type structure I created like below
In Server SFTP adapter in Module tab I am using "AF_Modules/MessageTransformBean" and conversion type ="StructPlain2XML"
I am getting error = "Error: com.sap.aii.af.sdk.xi.adapter.trans.TransformException: Transformer Conversion3.0.5226 Error initializing Class: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found (4408) Parameter 'xml.keyFieldName' is missing (4403) Parameter 'xml.keyFieldType' is missing (4403) ; nested exception caused by: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found (4408) Parameter 'xml.keyFieldName' is missing (4403) Parameter 'xml.keyFieldType' is missing (4403) "
I am not using any key field then please let me know how to overcome this issue.
I searched on SDN but did not get any perfect answer.
Thanks
Dheeraj Kumar

Hello Dheeraj,
Thanks for your reply. I created a new discussion,
Flatfile to XML
Thanks well in advance for your help!
-Satish.

Flat file into XML

Hi,
I have a requriment like source will be sending IDoc DELVRY03 in form of flatfile(fixed length).So i have to convert to XML so that PI can do transformation.I cant do file content conversion.Target is also IDoc DELVRY03.
Kinldy suggest me how to convery flat file into XML.
Regards,
Anitha M
Edited by: Anitha m on Aug 3, 2010 10:07 AM

Hi Anitha,
You should use File content conversion to convert flat file into XML file.
Please check the below link, which help you to know how to do it.
http://saptechnical .com/Tutorials/XI/Contentconversion/page2.htm
Please check the weblink given below for converting the file content:
http://help.sap.com/saphelp_srm40/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Thanks,

How to convert flat file to XMl without key field value

Hi experts,
I have a input CSV Flat file which has got one HEADER line and Multiple Detail records.
I do not have any key field value to convert this FLAT file to XML using normal file content conversion.
Is there any module or Bean which can be used to convert this Flat File to XML.
Or any other remedy to overcome this problrm.
Thanks in advance.
Regards
Pradeep

Hi Saurabh,
Thanks for the reply.
Ur understanding is perfectly alright.Lets say my file is like below.
Account Number,Account Name,Currency,Unclear Balance,Account Balance010205000033,VAISHNAVI SALES CORPN,0.00,0.00,350000.00
010205000034,CHAKKA ENTERPRISES,0.00,-641350.47,8649.53
010205000035,SEHGAL TRADING COMPANY,338665.00,-220.00,461115.00
010205000036,SHUBH LAXMI AGENCIES,0.00,0.00,0.00
010205000037,EMPIRE AGENCIES,0.00,-245.11,0.00
010205000038,PIONEER AGENCIES,0.00,-696386.00,303614.00
I am not using the first line in the mappiing.
Are you saying that I need to ignore the first line while doing the conversion using Recordset OFFSET ?
Or do I need to make a single structure taking all the fields from header as well as details and while defining the structure I need to ignore the fields from header?
Please suggest.

Converting flat file to XML using JMS

Hi,
I want to convert flat file to xml. My sender adapter is JMS,
Can anyone tell me that how to do that conversion ? Conversion is very simple.
Can we use File content conversion in JMS Sender ? any link or blog ? or any other idea to achieve this ?
Regards
Kulwinder

Hi,
The pdf has been removed from that link i suppose.
Anyways, go through the below help, everything that is there in "HowToConveModuleJMS.pdf" has been mentioned in this...
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Hope it would surely help you.
You can go through the below link, for better understanding..
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0
Regards,
Swetha.
Edited by: Swetha Reddy on Feb 26, 2009 5:30 AM

Flat file to xml file

hello
I am having a scenario a flat file to XML file. in the comm. channel of the sender I made a content conversion to the file and I see in the SXMB MONI and it looks ok. the output file, is declared as a file and I recieve an empty xml file.
what am I missing?
why it doesnt go out through the mapping that I declared so I will get a valid XML with its data?
Kfir

Hi,
Please can you take the Sender side Payload from SXMB_MONI and try to test the mapping in Message Mapping ---> Test Tab.
See if you are getting the same results. Even check if you have properly map the Header nodes in Mapping.
Thanks
Swarup
Edited by: Swarup Sawant on Aug 4, 2008 8:08 AM

Conversion of Flat file to XML

Hi ,
        I have a scenario where i need to convert a FLAT File to XML ...
           Since I am using Seeburger Adapter the   usage FCC is ruled out.
           Is there any inbult Adapter Module available in SAP PI which can be used to convert a Flat file to XML.
         The Flat file has many rows... I just want a single record to repeat n times.
         Please help me on this.
Thanks,
Siva

Why don't try with Message Tran Bean
Check this below details out:
Processing Sequence:
1 localejbs/Seeburger/solution/sftp Local Enterprise Bean solutionid
2 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean mtb
3 localejbs/CallSapAdapter Local Enterprise Bean exit
Module Configuration:
mtb Transform.Class com.sap.aii.messaging.adapter.Conversion
mtb Transform.ContentType text/xml;charset=utf-8
mtb xml.conversionType SimplePlain2XML
mtb xml.documentName XXX_EXPENSES_mt
mtb xml.fieldContentFormatting trim
mtb xml.fieldNames FIELD1,FIELD2,FIELD3,FIELD4
mtb xml.fieldSeparator '0x09'
mtb xml.processFieldNames fromConfiguration
mtb xml.structureTitle RECORD
Regards
Pothana

Flat File to XML using content conversion.

Hi Experts,
I am converting a flat file to xml structure.
i need the structure of xml like :
<LineA>
</LineA>
<LineB>
<LineC>
</LineC>
</LineB>
I am able to generate it in hierarchy
<LineA>
</LineA>
<LineB>
</LineB>
<LineC>
</LineC>
How should i write structure of Recordset so that for LineC so that it comes under the LineB tag ? I also dont want the name of recordset in my output, how can i do that ?
Kulwinder.

Hi
Refer
File Receiver with Content Conversion
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
File Content Conversion for Unequal Number of Columns
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns - FCC
Content Conversion (Pattern/Random content in input file)
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file - FCC
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario - FCC - MDM
XI in the role of a FTP
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp - FCC
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - FCC
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter - EOIO - File
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent

IDOC to Flat File and XML ( Need both the Output)

Hi ,
My Scenario is IDOC to File .
I need o/p in 2 format . ie, 1) Flat File 2 ) XML file
I have a plan to go with Interface determination , 2 IM and what shd be the condition ?
or Else 2 Receiver detmination but condition ?
How to slove this ?
Need the Output from Idoc in 2 format ( Flat file and XML file )
Any Blog , Thread ...Tips...etc
Regards,
Jude

Hi Jude,
Do like this:
1. Create two inbound Service Interface (with the same target Message Type)
2. Create separate Operation mapping with the above service interfaces as target (with the same source service interface)
3. Create Interface Determination and include these two operation mapping (without any condition)
4. Create 2 receiver agreement (with two separate communication channel) for each of the target service Inetrface. In one channel use content conversion and the other one will give you normal XML output
Regards
Suraj

Flat files to XML conversion module?

Hi Experts,
I would like to know from where I can have free download for flat files to XML conversion module which I can test in development server. Your help will be well appreciated.
Thanks and Regards,
Praveen.

u have file adapter with FCC which does the flat file to XML conversion. wat is ur requirement?
refer the help or search on SDN for file content conversion.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
few examples:-
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Key value:
How to send a flat file with various field lengths and variable substructures to XI 3.0
File Receiver with Content Conversion
chirag

Flat file to XML Document

Similar Messages

Maybe you are looking for