FM for  display all capitals and initail letter capital and remain small

Hi experts
My requirement is display amounts all  CAPITALS and Initial Letter is capital and remaining letters are small
Any funtional modules is there is achieve this functionality.
thanks
umakanth

Hi,
1. TRANSLATE c TO UPPER CASE.
2. TRANSLATE c TO LOWER CASE.
3. TRANSLATE c USING c1.
4. TRANSLATE c ...FROM CODE PAGE g1...     TO CODE PAGE g2.
5. TRANSLATE f ...FROM NUMBER FORMAT n1... TO NUMBER FORMAT n2.
In se38  type translate and press f1, you will get with examples.
Thanks,
Senthil

Similar Messages

  • SSRS - How to display all the results from a query and then be able to filter the data

    Let's say I have a simple query that will return products name, ID, price
    SELECT pname,
    pID,
    price
    FROM products
    When I display the results in SSRS the user will (without entering any parameters) see something like:
    Product Name | ID | Price
    xyz                    1     $10.00
    .zzz                    10   $4,000.00
    How can I filter my results once they are displayed? For instance, Out of the results the user wants to see only the products where price is between $10 and $3000?
    -Alan

    Hi Visahk,
    Maybe I did not explain my issue very good. 
    I want the user to first see all results (without entering the price range) - then if he wants she/he can filter the results by price.
    As soon as I add 
    WHERE price BETWEEN @StartPrice AND @EndPrice
    to my SQL query, the user is prompted to enter a price range before seeing any data.
    -Alan
    Ok for that what you can do is to set allow null value property for the parameters.
    Then set NULL as default value for parameters in parameter properties tab
    and make the query as below
    WHERE price BETWEEN @StartPrice AND @EndPrice
    OR (@StartPrice IS NULL AND @EndPrice IS NULL)
    and then report will get executed without waiting for any prompt and user may change values at a later stage and rerun it
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • BAPI for Displaying all deliveries based on SalesArea

    Dear Experts,
          i want to display all the details of all deliveries based on SalesArea, but i couldn't found any BAPI for that, Plz tell me the BAPI name for my requirement
              Thanks in advance

    Hi Eswara,
    I hope you are fine.......
    Even I need bapi which can read all delivery data.
    In CRM I only have delivery number as follow up of sales order. so need to get all delivery data in CRM.
    If there is any Bapi then we can call it remotely and get all data in CRM.
    If you have any bapi please suggest.
    Thanks in advance,
    Dhanraj

  • Single query for displaying all but 1 column values for all tables

    Hi,
    All the tables have SYS_CREATION_DATE column.
    But I dont want to display this column value
    Can someone suggest some way in which i could achive this?
    Oracle version:11gR1
    OS:SunOS
    Cheers,
    Kunwar
    Edited by: user9131570 on Jul 6, 2010 7:57 PM

    user9131570 wrote:
    @Tubby
    I *want to display table-wise the values of all but 1(SYS_CREATION_DATE) columns in my database.*
    I need this in order to compare it to another database for all these values .Let me make a wild guess at what you are getting at.
    Given these two tables
    create table emp
       (empid number,
        empname varchar2(15),
        empaddr   varchar2(15),
        sys_creation_date date);
    create table dept
       (deptid number,
        deptmgr varchar2(10),
        sys_creation_date date);you want to somehow combine
    select empid,
             empname,
             empaddr
    from emp;with
    select deptid,
             deptmgr
    from dept;into a single sql statement?

  • Shortcut for display all, with piles ?

    When visualizing  your pictures, you can filter them so that you only see the top of the stack.
    To do that, you need to go in the filter (cmd F) and tick the appropriate checkbox on the top, whose label in english should be "stack extract only" or something similar, then close the filter.
    However, if you want to see again the other pics in the stack, you need to reopen the filter, "untick" it at the same place, close the filter.
    Does anybody know of a keyboard shortcut to achieve that ?

    Hi Kirby
    1. So far I plan to use Stacks for both uses: "version stacking" and "alike stacking"; since i've begun to do that, I have however become more selective in the "alike stacking" grouping. I only stack pictures that have the same angle (not topic), in order to keep some sense to browsing through projects with stacks closed.
    2. You're correct. With the precision that I want ultimately across my entire library each single pic, or each Pick of a stack, to be rated 1★-5★
    Now in this discussion we are drifting away from the intial topic (a UI issue) to a more fundamental one, which is workflow.
    So please let me rephrase the workflow issue, as I see it:
    I am not a professional photographer. I take pictures for my pleasure. Some are of my kids, some are from some places I went to that I want to remember, and some try more or less to convey an artistic value.
    Formerly, they used to be printed and stored. Now they are only digital.
    By rating and documenting them, I believe I give the photographing process a meaning.
    Every pic has a keyword (including names of my kids), a project named by the context, a date.
    So basically :
    1) the goal of archiving the growth of my kids is achieved
    2) the goal of archiving the places I went to is achieved
    Now, by rating them, I kind of feel that the "artistic" process is completed. The picture has been taken, and the output has been evaluated. In itself, this gives me a feeling of accomplishment. And I believe there is a collateral effect that I more or less conciously learn how to take better pictures, through a feedback loop. Indeed, rating it I reconsider the framing, the composition, the relevancy of settings for the shot (speed, aperture, zoom,...)  also the editing opportunities to optimize the rendering. For example, I realize that some contre-jours cannot really be saved. Which will make me avoid some of them in the future. That rapidly in zooming you have shallow depth of field, ...
    I knew all of that, but by actually checking the results, i begin to qualify more when it is acceptable , and when it is not.
    Additionnaly, I intend to print some of my best pics, and I would not want to forget some hidden jewel somewhere.
    As you see, the rationale for rating is objectionnable, but so far, I tends to fit my psychology.
    After this long disgression, i can come back to the issue of workflow.
    I have two processes to define.
    - One is for taking care of all the pics in my library (the 10 000); I can tell you it is a bit painful, and I am trying to find some way to make it easier. With some pic editing put in it to make it more rewarding, we are talking weeks of labour, part-time. So far i feel the need to work project by project, in order to have the benefit or remembering each context, to have intermediate goals, and to avoid messing up something on a too big scale
    - One is to define how I will handle future pictures. I am quite open to suggestion here. So far, I follow this pattern:
    1) Import as raw+jpeg, as the apple raw conversion process is not perfect and I want to keep the "original" rendering
    2) Delete missed ones
    3) Stack
    4) Document ( check dates, places, faces, keywords)
    5) Rate, 2 or 3 iterative passes
    6) Edit the best ones (chromatic abberration, red eyes, sharpness, contrast and shadows, reframing ...). Try alternative versions
    7) Print some
    8) (Planned) Sharing projects through iPad (need the next version to be fast enough) and AppleTV (need to update my Home Cinema, current quality is too low). Step 8 recommend that I do not stack too heavily in step 3.
    9) Keep with me the best ones (automatic iPhone synchronization)
    Hope this helps. Thank you for your interest

  • Is there anyway to unbuy a cd, my cousin accidently bought a cd i already had and itunes let it, and now i have no money left on my account! help!

    So i bought the new one direction CD the day it came out but one of the sogs didn't download and still won't so i re boutght it, and no problem, but then my cousin was going through my purchased and clicked on the song that didn't download it brought her to the CD and it said complete my album and she thought that would work so she clicked on it and itunes rebought the untire album except the troublesome song, now i have two sets of everysong but the one that started this whole mess and i am out $11, is there anyway that i can get my money back?

    Go to your account in iTunes, against the download is 'report a problem' use that and explain - the Apple guys are very helpful and should understand.

  • Display All Running Task image corrupted or tampered with

    My task scheduler reports of a number of corrupted task images. Now I want to display all running task on the server and it say the task image is corrupted or tampered with. 
    How do I recreate this task or repair it? Is there another way of viewing all task, running and inactive ones? What is causing these task image corruptions because my backup tasks are all now corrupted.

    Hi,
    Before going further, would you please let me know if you do some changes (such as: install updates, configure or modify certain setting) before this issue occurred?
    Please refer to the solutions that Ronnie Vernon provided in the following similar question. And then check if this issue can be solved.
    Vista Task Scheduler task image is corrupt
    http://social.technet.microsoft.com/Forums/windows/en-US/f86919c0-6a09-4f08-955a-76084a37db73/vista-task-scheduler-task-image-is-corrup?forum=itprovistaapps
    In addition, you can export and import those tasks. After importing, please check if those tasks can run normally. For detailed operations, please refer to the following
    articles.
    Export a Task
    http://technet.microsoft.com/en-us/library/cc709661.aspx
    Import a Task
    http://technet.microsoft.com/en-us/library/cc722156.aspx
    If your issue still exists, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • How to Add a New Filter Value in BEx WAD to Display All Result

    Hi experts,
    I want to add a new filter value in BEx WAD to display all data records. The scenario is as follows:
    The status field can have two values: Active ("A) and Inactive ("I").
    But the requirement is to have a third value to display all the data records (Active + Inactive). E.g. the value can be "G". The purpose is to increase the understandability for report users.
    Does anyone have an idea?
    Regards,
    Joon

    Hi Vineet,
    thanks for your reply. The problem is that there are only 2 values available for this Characteristic: "A" or "I".
    The requirement is to have a third value "G" (instead of the default "All Value") due to historical reason, because all future report users have been working with R/3 reports for quite some time and they are accustomed to using "G" for displaying all values.
    Is there any possibility to realize this?
    Thanks,
    Joon

  • ITunes Match displays all my music but won't download or play

    I have just upgraded to Yosemite, doing a clean install.  There are 2 user profiles - mine and my partner's.  My partner's music appears to be playing fine.  I have iTunes Match.  I created my user account yesterday, logging in with my one & only Apple ID.  I have turned iTunes Match on and it is displaying all of my music, playlists, movies and TV shows (all with the little cloud icon).  However nothing is playing or downloading.  Whenever I click to either download or stream a song I get a message telling me "This computer is already associated with an Apple ID" and telling me to wait 90 days.  Surely this is not referring to my partner's user account on the same iMac?  Otherwise what would be the point of having separate user accounts on a desktop?  All my music is correctly stored in iTunes Match - now I want to listen to it.  What has gone wrong here please?  And yes, my user account has only 1 Apple ID and has been logged in with that since inception.

    Apple have done something really screwy with Apple IDs on Yosemite. They've decided to associate an Apple ID with the device in its entirety, instead of with each user account.
    I have two logins, one for my own personal account and one for a radio show I produce. The personal account has iTunes Match but the radio show accountt is just normal iTunes with iTunes In The Cloud. When I want to download music for the radio show, I switch to that account. I needed to download some of the music for that account and was warned that if I change accounts on this device I won't be able to again for another 90 days. I had no choice because I needed those files. But now when I go back to my personal login, I can no longer download any of my music from iTunes Match.
    Fortunately, I have another device associated with my personal iTunes account and can download some of my music there instead.
    This really needs to be sorted out!

  • How to display all the questions of a survey in a page?

    How to create multiple surveys in a survey list?How to display all the questions in a page and provide feedback button for each question?While giving the feedback user can ab. to see posted question date and posted person name.
    sindu

    Hi,
    To display all the questions in a page instead of in a dialog, you can achieve it by using such an URL:
    http://yoursite/Lists/survey1/NewForm.aspx?IsDlg=0
    You can add a hyperlink with this URL into a page of your site, then you can navigate to the questions page by clicking this hyperlink.
    About how to add a hyperlink into a page:
    http://sharepoint.stackexchange.com/questions/55543/how-to-add-a-hyperlink-anchor-in-a-sharepoint-wiki-page
    If you have several questions to ask, it is recommended to post them into every single thread to make others easier to focus on one question in one thread.
    Feel free to reply if there is still any questions.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • Interactive report for displaying customer information

    hi,
        how to create an   interactive report for displaying customer information based on selection smade ,and corresponding bank details.

    pls check the sample code
    Use the tables Kna1 and knbk to get the customer details.
    ***extract the data into internal table
    select * from dbtab into itab.
    *In the loop hide the field you want to trigger the interactive list.
    loop at itab.
    write: / itab-kunnr, itab-name1.
    Hide itab-kunnr.
    endloop.
    use at line selecton to get desired output based on the condition
    at line-selection.
    select * fro dbab into itab where field = itab-kunnr.
    awards points if help ful.

  • I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

    I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

    If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
    Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8).  If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
    Insert the disk then power down
    HOLDING the C key, power up to boot from the disc.
    Get to Disk Utility
    If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
    When it completes the Repair process successfully as indicated in DU, do a shut down.  If Repair is not successful then an different course of action is indicated below.
    Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
    If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM  DO NOT ERASE THE DISK OR VOLUME FIRST.  REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system.  After re-installing the OS do a software update.  Note that ERASING the disk is NOT required to do an OS re-install.  This allows your existing data and application files to remain.
    If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
    If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk  and try a re-install.
    If that fasils then you may have a defective hard disk.

  • Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign

    Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
    Can someone HELP? I'm afraid I might do something wrong

    What backups do you have?

  • I need a Vietnamese keyboard. Recommendations? A keyboard that officially works with iPad and displays all the characters and their accent marks for typing.

    Where do I find an excellent and reliable Vietnamese keyboard for new iPad? A keyboard that displays all the characters and the accent marks so typing can be easily accomplished. The iPad keyboard selection for Vietnamese really only seems to change the Return key to the Vietnamese language. iPad is sold all over the world....my interest is Viet Nam.....the full keyboard.

    Thanks.....my Vietnamese expert spouse says this tip will work just fine.  I was not aware of the hold down function. Slow typing but accomplishes the objective native on the iPad.
    You are correct.....most Apps that I find seem to be based only on a copy/paste method of input.
    You solved the problem.

  • Display all valid items and select multiple items

    Let us say I have valid items in table. For each purchase user can select few items from the list. I have to display all valid items from table and user should able to check items to buy. What is the best way we can implement this in forms.
    Thanks, lalitha

    For all the valid items you can create LOV as i understood then user can choose what he wants. But this sentence ti still confusing to me. Or what is the tricky things in you scanerio if only you have to show the valid item then use LOV.
    Lalitk wrote:
    and user should able to check items to buy.-Ammad

Maybe you are looking for