FM for getting the Parent materials for the component material

Hi All,
I need to to get a list of parent materials for a given component material and that too upto 10 levels.
i.e.
Ist Iteration
The material M1 is a component in 3 other materials.
2nd iteration
The above 3 materials will be a components of 3 other materials each i.e. now a total of 9 materials are there.
3rd iteration
The above 9 materials will be a component of 3 other materials each i.e. now a total of 27 materials are there.
upto 10 iterations.
Is there any FM which can provide me the list of parent and superparents for a given component material..upto 10 levels (or something closer if these levels exists).
Regards
Abhishek

Hi,
Check this link..Getting the Parent Material (BOM)

Similar Messages

Can we get the raw materials for a classified Material from MSEG table?

Hi All,
Can we get the raw materials for a classified Material from MSEG table using Order number?
If yes How we can find it out for Past month only? As well how we can get the std price for this raw material.
Please help me out,
Thanks,
Ravi

Field STPRS (Standard price) From Table MBEW.
Kanagaraja L

All the raw materials for finished products

Can anyone please help me how to find all the raw materials for a finished product. The desired result which i am expecting is same that we get through TCode CS15.
Please help me to solve this issue.
anyone who answers will be rewarded..
thanx in advance

Hi,
Please note what you are talking is multi-level blow up & the logic given by me is for Single Level blow up. In any case you can modify the above mentioned logic as follows so that you will get the desired result.
Once you get all the first child materials of a BOM i.e. 800024 then check in MAST if there is a BOM for this child material. IF you get sy-subrc = 4 in Select of MAST it means there is no BOM Present for this child material hence no need to take any action. However for child material 800120 you will get sy-subrc = 0 indicating that there is a BOM for this child material so write these child material in ANOTHER INTERNAL TABLE SAY 'X' & DO NOT WRITE THIS CHILD MATERIAL in your current internal table. Follow this procedure for all child materials of this BOM. Once your thru with all child materials. loop at internal table 'X' which contains all materials which are haveing a BOM so repeat the above mentioned procedure for all child materials of material from 'X" i.e. in your case 800120. Stop this process till internal table 'X' is empty. I hope this helps,
Regards
Raju Chitale
Edited by: Raju Chitale on May 5, 2008 12:55 PM

Where do the raw materials for the iphone come from?

I'm doing a school project and I need to know where the raw materials for the iphone come from in order to explain it's role in globalization.
Thanks!

"did you ever figure this out?"
No, he wants people uninvolved with his school project to "figure it out".

How to get the parent node of the current node?

Hi all,
i want to get the parent node of the current node and the not the parent of the parent node.
thank you very much

Hi,
the parent node of <subnode1-2>29.99</subnode1-2> is (node1), how can do to get <node1> throw <subnode1-2>29.99</subnode1-2> the sub node of <node1>.
As per my understanding the parent node of <subnode1-2>29.99</subnode1-2> is book not the node1.
If you want node 1 as a parent of subnode1-2 than your xml will look like this.
<?xml version="1.0" encoding="ISO-8859-1"?>
<bookstore>
<book>
<fathernode>Harry Potter</fathernode>
<node1>
       <subnode1>29.99</subnode1>
       <subnode2>29.99</subnode2>
</node1>
<node2>
       <subnode1>19.99</subnode1>
       <subnode2>19.99</subnode2>
</node2>
</book>
</bookstore>
and also if you want tom retrive float data than refer following XPATH.
"//book[[price='1000']]/price/text()"
Regards,
Manoj Bilthare

How do I hide the parent folder of the user home folders in File Sharing?

In 10.6 Server I would set the parent folder so that "Everyone" could not list folder contents, then set "Everyone else" read only. This prevented the parent folder from showing up in the list of available Share Points and allowing users to see the list of home directories.
In 10.8, this trick no longer seems to work. No matter what I set the ACLs to, the folder always shows up as a share point in the connection window. 2014 is the folder I've set for the Home directories of our network users (and there will be 2 more for graduating years.) I can set the ACL so if they attempt to mount it, it just spits out an error saying they can't view the contents, but that isn't reasonable. I don't want it to show up at all. The only thing the students should see is their home folder. Nothing else.
What can I do to make it so 2014 doesn't show up in the connection window? 2014 is the parent folder for the home directories, so it can't be unshared.

This prevented the parent folder from showing up in the list of available Share Points and allowing users to see the list of home directories.
That second sentence should read:
This prevented the child folder (parent folder to the home directories) from showing up in the list of available Share Points and allowing users to see the list of home directories.

Power shell script for get a content db for a particular web application

Hi
what is the power shell script for get a content db for a particular web application
Get-SPDatabase
adil

try this one
Get-SPContentDatabase -webapplication http://url
this will return all the database for the web applications.
Get-SPContentDatabase -site http://contoso.com
this will return the database name in which the contose site collection is.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

[svn:osmf:] 11359: Fixing MetadataWatcher not invoking a value change callback when the parent facet of the target value is added or removed .

Revision: 11359
Author:   [email protected]
Date:     2009-11-02 05:20:01 -0800 (Mon, 02 Nov 2009)
Log Message:
Fixing MetadataWatcher not invoking a value change callback when the parent facet of the target value is added or removed.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/metadata/MetadataWatcher.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/metadata/TestMetadataUtils.as

mikeporter wrote:
I'm sorry I'm not aware of any "cumbersome" subpanels - unless of course you don't know what you're doing. There is this wonderful invention called a "subVI" that can be used to organize and simplify your code, or are they too "cumbersome" as well? You should really learn a bit about what you are pontificating over before you start running off at the mouth.
Mike...
I didn't want to step on your toes. No need to get personal.
Subpanels make some additional code necessary that hasn't got to do anything with the actual program. And I AM using subIVs as I wrote in my first post, which is exactly the root of the problem.
Nevertheless I now solved it in a way that comes close to what I wanted. I don't know if some of you meant your suggestions to be understood that way (at least I didn't ). The subVIs will now "insert" themselves (via invoke node) into a subpanel on the main vi, which they are given a reference of at call. This adds minimal aditional code, especially on the main VI which I want to keep as clean as possible. By clustering the panel reference into the parameters the subVIs are already given (not used in the example I attached below), there isn't even a change on the terminals of the subVIs.
I got to check now if this works well with event structures within the subVIs or if it can create the same problems like multiple event structures within a single VI.
So no global variables anymore and no writing values by property node. I don't know if this just wasn't possible in previous Labview versions I had a try at that (I guess it was 8.6 and/or 2009) or I just didn't come up with the idea back then.
And if the text wasn't that helpful, here are two screens:
Parent VI:
SubVI:
Attachments:
main.png ‏2 KB
subvi.png ‏5 KB

Calling a Function in the Parent Window from the Child Window

QUESTION: How do I call a function resident in the parent
window from a child window?
BACKGROUND
I have a JavaScript function resident in the parent window
that reformats information obtained from the Date object and writes
the result to the parent window using the document.write( ) method.
I would like to call this function from the child window and have
it write to the child window instead. Is this possible? If not,
must I rewrite the entire function and nest it in the below code?
If so, what is the proper form of nesting?
CODE: The code that creates and fills the child window is
provided below. The highlighted area indicates where I would like
to enter the information from the function resident in the parent
window. I have tried every imaginable permutation of code that I
can imagine and nearly destroyed my parent document in the process.
I am very happy that I had a back-up copy!
function openCitationWindow() {
ciDow = window.open("", "", "width=450, height=175, top=300,
left=300");
ciDow.document.write("A proper way to cite a passage of text
on this page:<br /><br />Stegemann, R. A. 2000.
<cite>Imagine: Bridging a Historical Gap</cite>. " +
document.title + ". [<a href='" + location.href + "'
target='_blank'>online book</a>] <" + location.href
+ "> (");
MISSING CODE;
ciDow.document.write(").<br /><br /><input
type='button' value='Close Window' onclick='window.close()'>");
ciDow.focus();

Never mind - I was doing something very stupid and wasn't
calling the function as a method of a movie clip. I was simply
calling checkTarget(event) rather than
event.currentTarget.checkTarget(event); which seems to work.

Why do I have to go to the parent folder because the tag doesn't work?

If I click on a Tag, which has the identical URL (Tag "Location") to what resides in the Parent Folder it will not access the website. However, if I go to the Parent Folder and click on the Bookmark the website can be accessed. The URLs were copied and pasted so there is no issue as far as the URL is concerned.
It seems as though something interferes or differs when using a Tag. Sometimes I've tried recopying the URL as displayed on the website and re-pasting it in the Tag Location (URL). That works but only on a temporary basis. The next time I access the Tag I can't connect to the website.
Is this a website issue, or a browser issue? Can a website know that a Firefox user is using a Tag to access it and won't allow access, but will if access is done through the Parent Folder?

The "Parent Folder" is an add-on. Browse Add-ons and you'll find it. If you don't have it, add it. It has been a worthwhile addition. What it allows is to right click on a tag. A drop-down menu appears that say, "Go Parent Folder".
This has been enormously helpful in organizing and being able to find stored Bookmarks, especially if you've got a lot of them.
But something seems to be happening more regularly. When trying to open a website using a Tag it will time-out. It takes many tries to connect, but if you "Go Parent Folder" to where the Bookmark is actually stored the website usually opens immediately. Since both the Tag and the Bookmark appear to contain the same URL to be accessed it appears that something is happening with the Go Parent Folder Add-on or the interaction with the Tag and the Bookmark that won't allow connection to the website.
I'm no programmer, but this is where I'd look to try and identify the problem. I'm currently using Windows 8.1 and this seemed less frequent before I gravitated from Windows XP Pro. Many of these links I've had going back to Windows 2000 Pro.
I hope I've answered your question. This has become so annoying that I decided to take the time to comment about it.

Function module for getting month and year of the previous month (say -6)

Hi,
Is there a function module that will get you the month and year of say, a month before, and as far as 11 months ago.
For example, say today is 6/2007. I want 7 months ago.
How do i get this value?
What function module or method is available?
Points will be rewarded and responses will be appreciated.
Thank You,
John

Hi
lv_period gives the month and year which is two months earlier now as we have specified lv_months as -2.
    DATA: LV_PERIOD LIKE S001-SPMON,
          LV_MONTHS(2) TYPE C VALUE '2-',
          LV_DATUM LIKE SY-DATUM,
          LV_NEWDT LIKE SY-DATUM,
        P_SPMON LIKE S001-SPMON VALUE '200601'.
    CONCATENATE P_SPMON '01' INTO LV_DATUM.
    LV_PERIOD = P_SPMON+0(6).
    CALL FUNCTION 'MONTH_PLUS_DETERMINE'
         EXPORTING
              MONTHS = LV_MONTHS
              OLDDATE = LV_DATUM
        IMPORTING
             NEWDATE = LV_NEWDT
         EXCEPTIONS
              OTHERS = 1.
     IF SY-SUBRC = 0.
       LV_PERIOD = LV_NEWDT+0(6).
     ENDIF.
WRITE :/ LV_PERIOD.
OR
Use the following FM for getting the year and the month based on date
CACS_DATE_GET_YEAR_MONTH
or
Call Function 'CCM_GO_BACK_MONTHS '.
Funny module: 03/31/2002 - 1 month = 02/31/2002
OR
RE_ADD_MONTH_TO_DATE ( Add / substract month to/from date )
Need ur reward points.
Best regards,
Ravi

Should I return my iPod touch? And If I do return mi iPod Touch, will I get charged for getting a new one? The problem is that my iPod won't turn on, it only shows the apple icon, then immediately shuts off. I have a 1 year guarantee, a

My Year Guarantee Ends In Early April, and my iPod is in great physical condition.
I have not dropped it or anything!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to make sub programs dependent on the parent program for ESS job in Fusion Applications.

Hi Experts,
We have a requirment to define the ESS jobs dependent on the parent program.
Example:
ESS_JOB_PARENT   -- Main ESS jobs which will trigger below mentioned jobs using "ess_runtime.submit_subrequest" through PL/SQL Package.
ESS_JOB1                 -- Parent program has to wait will ESS_JOB1 is completed. If ESS_JOB1 is errored then parent program should also be errored.
ESS_JOB2                 -- If ESS_JOB1 is successfull then Parent program should trigger ESS_JOB2 and it has to wait till ESS_JOB2 is completed. If ESS_JOB2 is error parent program should be errored.
ESS_JOB3                 -- If ESS_JOB2 is completed successfully then parent program should trigger ESS_JOB3 and it has to wait till ESS_JOB3 is completed. If ESS_JOB3 is error then parent program should be errored.
Any reference (document or sample code) are highly appericiated.
Thanks,
Praveen

Is there a reason why "Job Set Steps" cannot be used, that is is there a reason you need to do this programmatically ?
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

How to get the parent Frame of a component ?

Hi,
I'm wondering how to get the parent JFrame (or JDialog) of a component.
Thanks for tips

I'm using this code:
public Component getFrame(Component comp)
    Component frame = comp;
    while ((frame != null) && !(frame instanceof Frame))
        frame = frame.getParent();
    if (frame == null)
        frame = comp; // no parent found
    return frame;
}

How to delete the duplicate rows present in the parent table & insert the latest duplicate record into the parent table linked with the child table.

I have a master table and i need to import the rows into the parent and child table.
Master table name is Flatfile_Inventory
Parent Table name is INVENTORY
Child Tables name are INVENTORY_AMOUNT,INVENTORY_DETAILS,INVENTORY_VEHICLE,
Error details will be goes to LOG_INVENTORY_ERROR
I have 4 duplicate rows in the Flatfile_Inventory which i have already inserted in the Parent and child table.
Again when i run the query using stored procedure,
its tells that all the 4 rows are duplicate and will move to the Log_Inventory_Error.
I need is if i have the duplicate rows in the flatfile_Inventory when i start inserting into the parent and child table the already inserted row have the unique ID i
must identify it and delete that row in the both parent and chlid table.And latest row must get inserted into the Parent and child table from Flatfile_Inventory.
Please help me to write the query i have attached the Full stored procedure Script..
Arunraj Kumar

Hi Santhosh,
This is my Script.
-- =============================================
-- Stored Procedure for FLATFILE_INVENTORY
-- =============================================
-- Drop stored procedure if it already exists
DROP PROCEDURE SP_Flatfile_Inventory
GO
CREATE PROCEDURE SP_Flatfile_Inventory
AS
--USE IconicMarketing
GO
DECLARE
@FileType varchar(50) ,
@ACDealerID varchar(50) ,
@ClientDealerID varchar(50) ,
@DMSType varchar(50) ,
@StockNumber varchar(50) ,
@InventoryDate datetime ,
@StockType varchar(100) ,
@DMSStatus varchar(50) ,
@InvoicePrice numeric(18, 2) ,
@CostPack varchar(50) ,
@SalesCost numeric(18, 2) ,
@HoldbackAmount numeric(18, 2) ,
@ListPrice numeric(18, 2) ,
@MSRP varchar(max) ,
@LotLocation varchar(50) ,
@TagLine varchar(max) ,
@Certification varchar(max) ,
@CertificationNumber varchar(max) ,
@VehicleVIN varchar(50) ,
@VehicleYear bigint ,
@VehicleMake varchar(50) ,
@VehicleModel varchar(50) ,
@VehicleModelCode varchar(50) ,
@VehicleTrim varchar(50) ,
@VehicleSubTrimLevel varchar(max) ,
@Classification varchar(max) ,
@TypeCode varchar(100) ,
@VehicleMileage bigint ,
@EngineCylinderCount bigint ,
@TransmissionType varchar(50) ,
@VehicleExteriorColor varchar(50) ,
@VehicleInteriorColor varchar(50) ,
@CreatedDate datetime ,
@LastModifiedDate datetime ,
@ModifiedFlag varchar(max) ,
@InteriorColorCode varchar(50) ,
@ExteriorColorCode varchar(50) ,
@PackageCode varchar(50) ,
@CodedCost varchar(50) ,
@Air varchar(100) ,
@OrderType varchar(max) ,
@AgeDays bigint ,
@OutstandingRO varchar(50) ,
@DlrAccessoryRetail varchar(50) ,
@DlrAccessoryCost varchar(max) ,
@DlrAccessoryDesc varchar(max) ,
@ModelDesc varchar(50) ,
@Memo1 varchar(1000) ,
@Memo2 varchar(max) ,
@Weight varchar(max) ,
@FloorPlan numeric(18, 2) ,
@Purchaser varchar(max) ,
@PurchasedFrom varchar(max) ,
@InternetPrice varchar(50) ,
@InventoryAcctDollar numeric(18, 2) ,
@VehicleType varchar(50) ,
@DealerAccessoryCode varchar(50) ,
@AllInventoryAcctDollar numeric(18, 2) ,
@BestPrice varchar(50) ,
@InStock bigint ,
@AccountingMake varchar(50) ,
@GasDiesel varchar(max) ,
@BookValue varchar(10) ,
@FactoryAccessoryDescription varchar(max) ,
@TotalReturn varchar(10) ,
@TotalCost varchar(10) ,
@SS varchar(max) ,
@VehicleBody varchar(max) ,
@StandardEquipment varchar(max) ,
@Account varchar(max) ,
@CalculatedPrice varchar(10) ,
@OriginalCost varchar(10) ,
@AccessoryCore varchar(10) ,
@OtherDollar varchar(10) ,
@PrimaryBookValue varchar(10) ,
@AmountDue varchar(10) ,
@LicenseFee varchar(10) ,
@ICompany varchar(max) ,
@InvenAcct varchar(max) ,
@Field23 varchar(max) ,
@Field24 varchar(max) ,
@SalesCode varchar(max) ,
@BaseRetail varchar(10) ,
@BaseInvAmt varchar(10) ,
@CommPrice varchar(10) ,
@Price1 varchar(10) ,
@Price2 varchar(10) ,
@StickerPrice varchar(10) ,
@TotInvAmt varchar(10) ,
@OptRetail varchar(max) ,
@OptInvAmt varchar(10) ,
@OptCost varchar(10) ,
@Options varchar(max) ,
@Category varchar(max) ,
@Description varchar(max) ,
@Engine varchar(max) ,
@ModelType varchar(max) ,
@FTCode varchar(max) ,
@Wholesale varchar(max) ,
@Retail varchar(max) ,
@Draft varchar(max) ,
@Inventoryid int;
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY];
OPEN Inventory_Cursor
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ;
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT @VehicleVIN ;
-- ****************** insert into Inventory Table ***********
INSERT INTO INVENTORY
IconicDealerID,
StockNumber,
DMSType,
InventoryDate
VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate);
set @Inventoryid = scope_identity();
PRINT @Inventoryid;
--Insert into Inventory_Details Table
INSERT INTO [INVENTORY_DETAILS]
InventoryID,
StockType,
DMSStatus,
LotLocation,
TagLine,
Certification,
CertificationNumber,
CreatedDate,
LastModifiedDate,
ModifiedFlag,
PackageCode,
OrderType,
AgeDays,
OutstandingRO,
Memo1,
Memo2,
Purchaser,
PurchasedFrom,
DealerAccessoryCode,
InStock,
AccountingMake,
SS,
Account,
AccessoryCore,
ICompany,
InvenAcct,
Field23,
Field24,
SalesCode,
Draft,
FTCode
VALUES (
@InventoryID,
@StockType,
@DMSStatus,
@LotLocation,
@TagLine,
@Certification,
@CertificationNumber,
@CreatedDate,
@LastModifiedDate,
@ModifiedFlag,
@PackageCode,
@OrderType,
@AgeDays,
@OutstandingRO,
@Memo1,
@Memo2,
@Purchaser,
@PurchasedFrom,
@DealerAccessoryCode,
@InStock,
@AccountingMake,
@SS,
@Account,
@AccessoryCore,
@ICompany,
@InvenAcct,
@Field23,
@Field24,
@SalesCode,
@Draft,
@FTCode
--Insert into Inventory_Amount Table
INSERT INTO [dbo].[INVENTORY_AMOUNT]
InventoryID,
AllInventoryAcctDollar,
OtherDollar,
PrimaryBookValue,
AmountDue,
LicenseFee,
CalculatedPrice,
OriginalCost,
BookValue,
TotalReturn,
TotalCost,
DlrAccessoryRetail,
DlrAccessoryCost,
DlrAccessoryDesc,
InternetPrice,
InventoryAcctDollar,
BestPrice,
Weight,
FloorPlan,
CodedCost,
InvoicePrice,
CostPack,
SalesCost,
HoldbackAmount,
ListPrice,
MSRP,
BaseRetail,
BaseInvAmt,
CommPrice,
Price1,
Price2,
StickerPrice,
TotInvAmt,
OptRetail,
OptInvAmt,
OptCost,
Wholesale,
Retail
VALUES (
@InventoryID,
@AllInventoryAcctDollar,
@OtherDollar,
@PrimaryBookValue,
@AmountDue,
@LicenseFee,
@CalculatedPrice,
@OriginalCost,
@BookValue,
@TotalReturn,
@TotalCost,
@DlrAccessoryRetail,
@DlrAccessoryCost,
@DlrAccessoryDesc,
@InternetPrice,
@InventoryAcctDollar,
@BestPrice,
@Weight,
@FloorPlan,
@CodedCost,
@InvoicePrice,
@CostPack,
@SalesCost,
@HoldbackAmount,
@ListPrice,
@MSRP,
@BaseRetail,
@BaseInvAmt,
@CommPrice,
@Price1,
@Price2,
@StickerPrice,
@TotInvAmt,
@OptRetail,
@OptInvAmt,
@OptCost,
@Wholesale,
@Retail
--Insert into Inventory_Vehicle Table
INSERT INTO [dbo].[INVENTORY_VEHICLE]
InventoryID,
InteriorColorCode,
ExteriorColorCode,
Air,
ModelDesc,
VehicleType,
VehicleVIN,
VehicleYear,
VehicleMake,
VehicleModel,
VehicleModelCode,
VehicleTrim,
VehicleSubTrimLevel,
Classification,
TypeCode,
VehicleMileage
VALUES (
@InventoryID,
@InteriorColorCode,
@ExteriorColorCode,
@Air,
@ModelDesc,
@VehicleType,
@VehicleVIN,
@VehicleYear,
@VehicleMake,
@VehicleModel,
@VehicleModelCode,
@VehicleTrim,
@VehicleSubTrimLevel,
@Classification,
@TypeCode,
@VehicleMileage
-- Move cursor to Next record
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ;
END
CLOSE Inventory_Cursor;
DEALLOCATE Inventory_Cursor;
GO
SET ANSI_PADDING OFF
GO
Arunraj Kumar

FM for getting the Parent materials for the component material

Similar Messages

Maybe you are looking for