FM or BAPI to test HU creation using Packing instruction in test mode

Hi SAP Gurus,
Can you guys help me in finding out an appropriate FM or BAPI thourgh which systme will create HU using Packaging instructions.
I have Packaging instructions are setup as master record and Determination proceudre is also created.
Just wanted to simulate or test the creation of HU using Packaging instructions.
Regards
G.Naveen

Hi,
Use BAPI : BAPI_HU_CREATE to create HU.
Regards,
Vishal

Similar Messages

  • BAPI or FM for HU create Packing Instructions

    Can Anyone plz tell me any BAPI or Function Module to create HU from Packing INstructions.
    Many Thanks
    Edited by: Hiren N. Panchal on Feb 7, 2011 9:50 AM

    Thanks Abhijeet for mentioning both the BAPIs.
    I am already aware of both these BAPIs, But I want to create HU during Goods Receipt Production Order & there I need to create an HU wrt Packing INstructions & pack the contents from Receipt of Production Order.
    PLz tell me any bapi which can create HU & perform packing by passing PAcking Instructions will be very much helpful & also it will eliminate 2 steps of BAPI HU Create & BAPI HU Pack.
    MAny Thanks once again..!!

  • Reena Prabhakar - Sales order creation Using BAPI

    Hi Reena,
    This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
    Regards,
    Dinesh

    Anyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
    FUNCTION ztest.
    Call the BAPI to create Sales Order
      CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
        EXPORTING
          order_header_in     = l_order_header
        IMPORTING
          salesdocument       = l_salesdocument
        TABLES
          return              = it_return
          order_items_in      = it_order_items
          order_partners      = it_order_partners
          order_schedules_in  = it_order_schdl
          order_conditions_in = it_order_conditions
          order_text          = it_order_text.
      READ TABLE it_return WITH KEY type = 'E'.
      IF sy-subrc = 0.
    *-- error occured
        CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      ELSE.
    *-- no error
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      ENDIF.
    ENDFUNCTION.

  • Error in standard network creation using BAPI

    hi,
    I need to create standard network using BAPI.
    I am trying with BAPI_BUS2002_CREATE. As per the documentation, I need to call function BAPI_PS_INITIALIZATION. But, I am not able to get the required output since its giving me error.
    Does anybody has used the same BAPI for standard network creation.
    Regards,
    Ujjwala

    HI,
            How did u create standard network? If u used bapi, which bapi did u use???

  • Need sales order creation using bapi in oops

    need code for sales order creation using bapi in oops

    hi rocky,
              could you pls give a bit explanation on what you are expecting.
    regards,
    Pavan

  • Mass sales order creation using BAPI

    Dear All,
    Can anyone help in  mass sales order creation using Bapi BAPI_SALESORDER_CREATEFROMDAT2.
    For example if i want to create 3 sales order with three item per order . i am populating
    HEADER = 3 Records
    Item   = 9 records
    schedule = 9 records
    partner  = 1 record.
    Then after populating the records I am calling Bapi BAPI_SALESORDER_CREATEFROMDAT2
    to create order. It should have created three order but unfortunately it creates
    only one sales order. I debugged and found that records are correct both in header,
    item, scheudle and partners.
    Could you please guide me what I am missing for creation of mass orders.
    I appreciate your time and many thanks in advance.
    cheers
    chandra

    Hi Chandra,
    Do like this.
    Loop at Header table into wa_header.
    *-- Move BAPI Header data
    Loop at item table into wa_item where condition.
    *--  in this move all Item and Schedule line item  to the BAPI.
      At end of item .
    Use the below function modules.
    BAPI_SALESORDER_CREATEFROMDAT2
    BAPI_TRANSACTION_COMMIT.
    Endloop.
    Endloop.
    Regards,
    Balavardhan.K

  • Sales Order Creation using LSMW-BAPI.

    Hai,
         While executing a 14th step in LSMW-BAPI,the IDOC is generated.While Testing the IDoc the values for the Header segment alone is displayed.The Segment sfor Item is not Displayed.Should there be any link between Header & the ITem.
    Regards,
    Padmam.

    Hi,
    Can u tell me the steps to create a sales order using idoc, i've created a bapi but thats a temprory use. I wanted to created a sales order automatically when a purchase order is saved.
    Please let me know if u can help me, i wanted to do it using idoc
    Regards
    Sanju

  • Material Master Creation Using BAPI

    Hi,
    I m using BAPI_MATERIAL_SAVEDATA for Material creation using BAPI.
    Now the problem is , i have created a Screen exit long back in Purchasing view.. the corresponding Z field is created in table MARC..
    How can i pass value to this Z field using BAPI.
    i tried with BAPI_MARC.. my Z field is not coming in that structure.
    Can anyone guide me how can this be achieved.
    Thanks in Advance
    Aravindh Mani

    Hi,
    The Function Module BAPI_MATERIAL_SAVEDATA has the options to pass the Z fields. There exits a structure parameters
    EXTENSIONIN
    EXTENSIONINX
    in BPAI. In EXTENSIONIN pass the data and value part you can pass  in EXTENSIONINX. So this will update the Z fileds in material
    master .

  • BAPI:BAPI_TRLSRVAPS_SAVEMULTI2 for TLane creation is giving error

    Hi Gurus,
    I am executing BAPI:BAPI_TRLSRVAPS_SAVEMULTI2 for TLane creation. when i am passing required values like , location from , Location to, model, version, lot size , etc.
    After executing the BAPI is returning that ''Entry was not processed because there is no changing parameter available''. Can any one experienced this before. As i am creating a new TLane, why this error should come???

    Hi ,
    Best way to check the parameter list is ,use the bapi BAPI_TRLSRVAPS_GETLIST (SCM 4.0) or similar available in 5.0 to read the existing transportation lanes successfully created in system.Check all the parameters and update similar parameters for BAPI_TRLSRVAPS_SAVEMULTI2.
    Ofcourse then you can come to exact parameters functionally important to you by trial and error.
    Otherwise you can use the APO loader tool to create the transportation lanes.Although SAP discourages to use it in the production system , for testing it is fine.Please check the FAQ note 551972.
    Regards,
    Nikhil Nalgirkar

  • Error in : Purchase order Creation using BAPI_PO_CREATE1

    Hell  guys,
    I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
    I want the new PO to have all the characteristics of an existing PO. whose PO # is  stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
    Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
    DATA: i_insert,
            i_create_order,
            i_cycle     TYPE cycle,
            i_qty_acpt  TYPE dzmeng,
            i_dly_date  TYPE vbak-vdatu,
            i_item      TYPE roijnomiio .
      DATA: i_order TYPE symsgv,
            i_return TYPE swd_return .
      DATA: i_vbak      TYPE vbak,
            i_vbap      TYPE vbap,
            i_ekko      TYPE ekko,
            i_ekpo      TYPE ekpo,
            i_bsoh      TYPE bapisdhd1,
            i_bsohx     TYPE bapisdhd1x,
            i_bpoh      TYPE bapimepoheader,
            i_bpohx     TYPE bapimepoheaderx,
            i_vbeln     TYPE vbeln_va,
            i_posnr     TYPE posnr_va,
            i_contr     TYPE vbeln_va,
            i_conit     TYPE posnr_va,
            i_ebeln     TYPE ebeln,
            i_ebelp     TYPE ebelp,
            i_pargr     TYPE pargr,
            i_thead     TYPE thead,
            i_line      TYPE tline,
            i_note      TYPE txw_note,
            i_new_vbeln TYPE vbeln_va,
            i_new_ebeln TYPE ebeln,
            i_wa_bsoi   TYPE bapisditm,
            i_wa_bsoix  TYPE bapisditmx,
            i_wa_bsop   TYPE bapiparnr,
            i_wa_bsos   TYPE bapischdl,
            i_wa_bsosx  TYPE bapischdlx,
            i_wa_vbpa   TYPE vbpa,
            i_wa_vbkd   TYPE vbkd,
            i_wa_bpoi   TYPE bapimepoitem,
            i_wa_bpoix  TYPE bapimepoitemx,
            i_wa_bpos   TYPE bapimeposchedule,
            i_wa_bposx  TYPE bapimeposchedulx,
            i_wa_bpop   TYPE bapiekkop,
            i_wa_ekpa   TYPE ekpa,
            i_message   TYPE char72,
            i_bapiretn  TYPE bapiret2,
            i_bapiret2  TYPE TABLE OF bapiret2 INITIAL SIZE 1,
            i_vbpa      TYPE TABLE OF vbpa INITIAL SIZE 1,
            i_vbkd      TYPE TABLE OF vbkd INITIAL SIZE 1,
            i_ekpa      TYPE TABLE OF ekpa INITIAL SIZE 1,
            i_bsoi      TYPE TABLE OF bapisditm INITIAL SIZE 1,
            i_bsoix     TYPE TABLE OF bapisditmx INITIAL SIZE 1,
            i_bsos      TYPE TABLE OF bapischdl INITIAL SIZE 1,
            i_bsosx     TYPE TABLE OF bapischdlx INITIAL SIZE 1,
            i_bsop      TYPE TABLE OF bapiparnr INITIAL SIZE 1,
            i_bpoi      TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
            i_bpoix     TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
            i_bpos      TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
            i_bposx     TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
            i_bpop      TYPE TABLE OF bapiekkop INITIAL SIZE 1,
            i_text_tab  TYPE TABLE OF tline INITIAL SIZE 1,
            i_line_tab  TYPE TABLE OF tline INITIAL SIZE 1,
            i_txw_note  TYPE TABLE OF txw_note INITIAL SIZE 1,
            i_oij_el_doc_mot TYPE oij_el_doc_mot .
      CONSTANTS: c_char_c VALUE 'C',
                 c_char_e VALUE 'E',
                 c_char_p VALUE 'P',
                 c_char_g VALUE 'G',
                 c_char_i VALUE 'I',
                 c_char_s VALUE 'S',
                 c_char_x VALUE 'X',
                 c_zsw(3) VALUE 'ZSW',
                 c_nomit_stat(4) VALUE 'ZDNY' .
      DATA : lv_nomtk_split        TYPE oij_nomtk.
      DATA : i_order_split_create  TYPE TABLE OF zsws_order_split.
      DATA : wa_order_split_create TYPE zsws_order_split.
      LOOP AT i_order_split_create INTO wa_order_split_create.
        IF NOT i_create_order IS INITIAL .
          CLEAR: i_create_order .
              MOVE: wa_order_split_create-docnr  TO i_ebeln,
                    wa_order_split_create-docitm TO i_ebelp .
              CALL FUNCTION 'ME_EKKO_SINGLE_READ'
                   EXPORTING
                        pi_ebeln         = i_ebeln
                   IMPORTING
                        po_ekko          = i_ekko
                   EXCEPTIONS
                        no_records_found = 1
                        OTHERS           = 2.
              IF sy-subrc <> 0 .
              ENDIF .
    * Fill PO Header
              i_bpoh-comp_code   = i_ekko-bukrs .
              i_bpoh-doc_type    = i_ekko-bsart .
              i_bpoh-vendor      = i_ekko-lifnr .
              i_bpoh-langu       = i_ekko-spras .
              i_bpoh-pmnttrms    = i_ekko-zterm .
              i_bpoh-purch_org   = i_ekko-ekorg .
              i_bpoh-pur_group   = i_ekko-ekgrp .
              i_bpoh-currency    = i_ekko-waers .
              i_bpoh-agreement   = i_ekko-konnr .
              i_bpoh-incoterms1  = i_ekko-inco1 .
              i_bpoh-incoterms2  = i_ekko-inco2 .
    * Fill PO update indicator 'X'
              i_bpohx-comp_code  = c_char_x .
              i_bpohx-doc_type   = c_char_x .
              i_bpohx-vendor     = c_char_x .
              i_bpohx-langu      = c_char_x .
              i_bpohx-pmnttrms   = c_char_x .
              i_bpohx-purch_org  = c_char_x .
              i_bpohx-pur_group  = c_char_x .
              i_bpohx-currency   = c_char_x .
              i_bpohx-agreement  = c_char_x .
              i_bpohx-incoterms1 = c_char_x .
              i_bpohx-incoterms2 = c_char_x .
              CALL FUNCTION 'ME_EKPO_SINGLE_READ'
                   EXPORTING
                        pi_ebeln         = i_ebeln
                        pi_ebelp         = i_ebelp
                   IMPORTING
                        po_ekpo          = i_ekpo
                   EXCEPTIONS
                        no_records_found = 1
                        OTHERS           = 2.
              IF sy-subrc <> 0 .
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
              ENDIF .
    * Fill PO Item
              i_wa_bpoi-po_item    = i_ekpo-ebelp .
              i_wa_bpoi-material   = i_ekpo-matnr .
              i_wa_bpoi-plant      = i_ekpo-werks .
              i_wa_bpoi-stge_loc   = i_ekpo-lgort .
              i_wa_bpoi-quantity   = wa_order_split_create-qty_acptd .
              i_wa_bpoi-po_unit    = i_ekpo-meins .
              i_wa_bpoi-tax_code   = i_ekpo-mwskz .
              i_wa_bpoi-val_type   = i_ekpo-bwtar .
              i_wa_bpoi-item_cat   = i_ekpo-pstyp .
              i_wa_bpoi-acctasscat = i_ekpo-knttp .
              i_wa_bpoi-agreement  = i_ekpo-konnr .
              i_wa_bpoi-agmt_item  = i_ekpo-ktpnr .
              APPEND i_wa_bpoi TO i_bpoi .
    * Fill PO Item update indicator 'X'
              i_wa_bpoix-po_item    = i_ekpo-ebelp .
              i_wa_bpoix-po_itemx   = c_char_x .
              i_wa_bpoix-material   = c_char_x .
              i_wa_bpoix-plant      = c_char_x .
              i_wa_bpoix-stge_loc   = c_char_x .
              i_wa_bpoix-quantity   = c_char_x .
              i_wa_bpoix-po_unit    = c_char_x .
              i_wa_bpoix-tax_code   = c_char_x .
              i_wa_bpoix-val_type   = c_char_x .
              i_wa_bpoix-item_cat   = c_char_x .
              i_wa_bpoix-acctasscat = c_char_x .
              i_wa_bpoix-agreement  = c_char_x .
              i_wa_bpoix-agmt_item  = c_char_x .
              APPEND i_wa_bpoix TO i_bpoix .
    * Fill PO Item Schedule
              i_wa_bpos-po_item       = i_ekpo-ebelp .
              i_wa_bpos-sched_line    = '0001' .
              i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
              i_wa_bpos-quantity      = wa_order_split_create-qty_acptd .
              APPEND i_wa_bpos TO i_bpos .
    * Fill PO Item schedule update indicator 'X'
              i_wa_bposx-po_item       = i_ekpo-ebelp .
              i_wa_bposx-sched_line    = '0001' .
              i_wa_bposx-delivery_date = c_char_x .
              i_wa_bposx-quantity      = c_char_x .
              APPEND i_wa_bposx TO i_bposx .
              CLEAR: i_pargr .
              SELECT SINGLE pargr
                INTO i_pargr
                FROM t161
               WHERE bstyp = i_ekko-bstyp
                 AND bsart = i_ekko-bsart .
              CLEAR i_ekpa[].
              CALL FUNCTION 'MM_READ_PARTNERS'
                   EXPORTING
                        application = c_char_p
                        ebeln       = i_ebeln
                        bstyp       = i_ekko-bstyp
                        pargr       = i_pargr
                   TABLES
                        x_ekpa      = i_ekpa[].
              LOOP AT i_ekpa INTO i_wa_ekpa .
                i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
                i_wa_bpop-langu = sy-langu .
                IF NOT i_wa_ekpa-lifn2 IS INITIAL .
                  i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
                ELSE .
                  i_wa_bpop-buspartno = i_wa_ekpa-parnr .
                ENDIF .
                APPEND i_wa_bpop TO i_bpop .
                CLEAR: i_wa_ekpa, i_wa_bpop .
              ENDLOOP .
              CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
              CALL FUNCTION 'BAPI_PO_CREATE1'
                   EXPORTING
                        poheader         = i_bpoh
                        poheaderx        = i_bpohx
                   IMPORTING
                        exppurchaseorder = i_new_ebeln
                   TABLES
                        return           = i_bapiret2
                        poitem           = i_bpoi[]
                        poitemx          = i_bpoix[]
                        poschedule       = i_bpos[]
                        poschedulex      = i_bposx[].
              i_order = i_new_ebeln .
              SHIFT i_order LEFT DELETING LEADING '0' .
              i_return-errortype = c_char_i .
              i_return-workarea  = c_zsw .
              i_return-message   = '064' .
              i_return-variable1 = i_order .
            loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
            append i_bapiretn to t_bapi_return .
          endloop .
          if t_bapi_return[] is initial .
             i_create_order = c_char_x .
               CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
                   EXPORTING
                        act_return = i_return. "Popup with new PO no.
          ENDCASE .                                     " Docind
        ENDIF .
      ENDLOOP.

    Hi Shareen,
    I think in the following parts of the code,
              CALL FUNCTION 'MM_READ_PARTNERS'
                   EXPORTING
                        application = c_char_p
                        ebeln       = i_ebeln
                        bstyp       = i_ekko-bstyp
                        pargr       = i_pargr
                   TABLES
                        x_ekpa      = i_ekpa[].
    Error in : Purchase order Creation using BAPI_PO_CREATE1
    Posted: Mar 20, 2006 7:39 PM      Reply      E-mail this post 
    Hell guys,
    I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
    I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
    Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
    DATA: i_insert,
            i_create_order,
            i_cycle     TYPE cycle,
            i_qty_acpt  TYPE dzmeng,
            i_dly_date  TYPE vbak-vdatu,
            i_item      TYPE roijnomiio .
      DATA: i_order TYPE symsgv,
            i_return TYPE swd_return .
      DATA: i_vbak      TYPE vbak,
            i_vbap      TYPE vbap,
            i_ekko      TYPE ekko,
            i_ekpo      TYPE ekpo,
            i_bsoh      TYPE bapisdhd1,
            i_bsohx     TYPE bapisdhd1x,
            i_bpoh      TYPE bapimepoheader,
            i_bpohx     TYPE bapimepoheaderx,
            i_vbeln     TYPE vbeln_va,
            i_posnr     TYPE posnr_va,
            i_contr     TYPE vbeln_va,
            i_conit     TYPE posnr_va,
            i_ebeln     TYPE ebeln,
            i_ebelp     TYPE ebelp,
            i_pargr     TYPE pargr,
            i_thead     TYPE thead,
            i_line      TYPE tline,
            i_note      TYPE txw_note,
            i_new_vbeln TYPE vbeln_va,
            i_new_ebeln TYPE ebeln,
            i_wa_bsoi   TYPE bapisditm,
            i_wa_bsoix  TYPE bapisditmx,
            i_wa_bsop   TYPE bapiparnr,
            i_wa_bsos   TYPE bapischdl,
            i_wa_bsosx  TYPE bapischdlx,
            i_wa_vbpa   TYPE vbpa,
            i_wa_vbkd   TYPE vbkd,
            i_wa_bpoi   TYPE bapimepoitem,
            i_wa_bpoix  TYPE bapimepoitemx,
            i_wa_bpos   TYPE bapimeposchedule,
            i_wa_bposx  TYPE bapimeposchedulx,
            i_wa_bpop   TYPE bapiekkop,
            i_wa_ekpa   TYPE ekpa,
            i_message   TYPE char72,
            i_bapiretn  TYPE bapiret2,
            i_bapiret2  TYPE TABLE OF bapiret2 INITIAL SIZE 1,
            i_vbpa      TYPE TABLE OF vbpa INITIAL SIZE 1,
            i_vbkd      TYPE TABLE OF vbkd INITIAL SIZE 1,
            i_ekpa      TYPE TABLE OF ekpa INITIAL SIZE 1,
            i_bsoi      TYPE TABLE OF bapisditm INITIAL SIZE 1,
            i_bsoix     TYPE TABLE OF bapisditmx INITIAL SIZE 1,
            i_bsos      TYPE TABLE OF bapischdl INITIAL SIZE 1,
            i_bsosx     TYPE TABLE OF bapischdlx INITIAL SIZE 1,
            i_bsop      TYPE TABLE OF bapiparnr INITIAL SIZE 1,
            i_bpoi      TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
            i_bpoix     TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
            i_bpos      TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
            i_bposx     TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
            i_bpop      TYPE TABLE OF bapiekkop INITIAL SIZE 1,
            i_text_tab  TYPE TABLE OF tline INITIAL SIZE 1,
            i_line_tab  TYPE TABLE OF tline INITIAL SIZE 1,
            i_txw_note  TYPE TABLE OF txw_note INITIAL SIZE 1,
            i_oij_el_doc_mot TYPE oij_el_doc_mot .
      CONSTANTS: c_char_c VALUE 'C',
                 c_char_e VALUE 'E',
                 c_char_p VALUE 'P',
                 c_char_g VALUE 'G',
                 c_char_i VALUE 'I',
                 c_char_s VALUE 'S',
                 c_char_x VALUE 'X',
                 c_zsw(3) VALUE 'ZSW',
                 c_nomit_stat(4) VALUE 'ZDNY' .
      DATA : lv_nomtk_split        TYPE oij_nomtk.
      DATA : i_order_split_create  TYPE TABLE OF zsws_order_split.
      DATA : wa_order_split_create TYPE zsws_order_split.
      LOOP AT i_order_split_create INTO wa_order_split_create.
        IF NOT i_create_order IS INITIAL .
          CLEAR: i_create_order .
              MOVE: wa_order_split_create-docnr  TO i_ebeln,
                    wa_order_split_create-docitm TO i_ebelp .
              CALL FUNCTION 'ME_EKKO_SINGLE_READ'
                   EXPORTING
                        pi_ebeln         = i_ebeln
                   IMPORTING
                        po_ekko          = i_ekko
                   EXCEPTIONS
                        no_records_found = 1
                        OTHERS           = 2.
              IF sy-subrc <> 0 .
              ENDIF .
    Fill PO Header
              i_bpoh-comp_code   = i_ekko-bukrs .
              i_bpoh-doc_type    = i_ekko-bsart .
              i_bpoh-vendor      = i_ekko-lifnr .
              i_bpoh-langu       = i_ekko-spras .
              i_bpoh-pmnttrms    = i_ekko-zterm .
              i_bpoh-purch_org   = i_ekko-ekorg .
              i_bpoh-pur_group   = i_ekko-ekgrp .
              i_bpoh-currency    = i_ekko-waers .
              i_bpoh-agreement   = i_ekko-konnr .
              i_bpoh-incoterms1  = i_ekko-inco1 .
              i_bpoh-incoterms2  = i_ekko-inco2 .
    Fill PO update indicator 'X'
              i_bpohx-comp_code  = c_char_x .
              i_bpohx-doc_type   = c_char_x .
              i_bpohx-vendor     = c_char_x .
              i_bpohx-langu      = c_char_x .
              i_bpohx-pmnttrms   = c_char_x .
              i_bpohx-purch_org  = c_char_x .
              i_bpohx-pur_group  = c_char_x .
              i_bpohx-currency   = c_char_x .
              i_bpohx-agreement  = c_char_x .
              i_bpohx-incoterms1 = c_char_x .
              i_bpohx-incoterms2 = c_char_x .
              CALL FUNCTION 'ME_EKPO_SINGLE_READ'
                   EXPORTING
                        pi_ebeln         = i_ebeln
                        pi_ebelp         = i_ebelp
                   IMPORTING
                        po_ekpo          = i_ekpo
                   EXCEPTIONS
                        no_records_found = 1
                        OTHERS           = 2.
              IF sy-subrc <> 0 .
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
              ENDIF .
    Fill PO Item
              i_wa_bpoi-po_item    = i_ekpo-ebelp .
              i_wa_bpoi-material   = i_ekpo-matnr .
              i_wa_bpoi-plant      = i_ekpo-werks .
              i_wa_bpoi-stge_loc   = i_ekpo-lgort .
              i_wa_bpoi-quantity   = wa_order_split_create-qty_acptd .
              i_wa_bpoi-po_unit    = i_ekpo-meins .
              i_wa_bpoi-tax_code   = i_ekpo-mwskz .
              i_wa_bpoi-val_type   = i_ekpo-bwtar .
              i_wa_bpoi-item_cat   = i_ekpo-pstyp .
              i_wa_bpoi-acctasscat = i_ekpo-knttp .
              i_wa_bpoi-agreement  = i_ekpo-konnr .
              i_wa_bpoi-agmt_item  = i_ekpo-ktpnr .
              APPEND i_wa_bpoi TO i_bpoi .
    Fill PO Item update indicator 'X'
              i_wa_bpoix-po_item    = i_ekpo-ebelp .
              i_wa_bpoix-po_itemx   = c_char_x .
              i_wa_bpoix-material   = c_char_x .
              i_wa_bpoix-plant      = c_char_x .
              i_wa_bpoix-stge_loc   = c_char_x .
              i_wa_bpoix-quantity   = c_char_x .
              i_wa_bpoix-po_unit    = c_char_x .
              i_wa_bpoix-tax_code   = c_char_x .
              i_wa_bpoix-val_type   = c_char_x .
              i_wa_bpoix-item_cat   = c_char_x .
              i_wa_bpoix-acctasscat = c_char_x .
              i_wa_bpoix-agreement  = c_char_x .
              i_wa_bpoix-agmt_item  = c_char_x .
              APPEND i_wa_bpoix TO i_bpoix .
    Fill PO Item Schedule
              i_wa_bpos-po_item       = i_ekpo-ebelp .
              i_wa_bpos-sched_line    = '0001' .
              i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
              i_wa_bpos-quantity      = wa_order_split_create-qty_acptd .
              APPEND i_wa_bpos TO i_bpos .
    Fill PO Item schedule update indicator 'X'
              i_wa_bposx-po_item       = i_ekpo-ebelp .
              i_wa_bposx-sched_line    = '0001' .
              i_wa_bposx-delivery_date = c_char_x .
              i_wa_bposx-quantity      = c_char_x .
              APPEND i_wa_bposx TO i_bposx .
              CLEAR: i_pargr .
              SELECT SINGLE pargr
                INTO i_pargr
                FROM t161
               WHERE bstyp = i_ekko-bstyp
                 AND bsart = i_ekko-bsart .
              CLEAR i_ekpa[].
              CALL FUNCTION 'MM_READ_PARTNERS'
                   EXPORTING
                        application = c_char_p
                        ebeln       = i_ebeln
                        bstyp       = i_ekko-bstyp
                        pargr       = i_pargr
                   TABLES
                        x_ekpa      = <b>i_ekpa[].</b>
              LOOP AT i_ekpa INTO i_wa_ekpa .
                i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
                i_wa_bpop-langu = sy-langu .
                IF NOT i_wa_ekpa-lifn2 IS INITIAL .
                  i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
                ELSE .
                  i_wa_bpop-buspartno = i_wa_ekpa-parnr .
                ENDIF .
                APPEND i_wa_bpop TO i_bpop .
                CLEAR: i_wa_ekpa, i_wa_bpop .
              ENDLOOP .
              CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
              CALL FUNCTION 'BAPI_PO_CREATE1'
                   EXPORTING
                        poheader         = i_bpoh
                        poheaderx        = i_bpohx
                   IMPORTING
                        exppurchaseorder = i_new_ebeln
                   TABLES
                        return           = i_bapiret2
                    <b>    poitem           = i_bpoi[]
                        poitemx          = i_bpoix[]
                        poschedule       = i_bpos[]
                        poschedulex      = i_bposx[].</b>
    it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not  i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
    CHange the code as follows:
    DATA: i_insert,
            i_create_order,
            i_cycle     TYPE cycle,
            i_qty_acpt  TYPE dzmeng,
            i_dly_date  TYPE vbak-vdatu,
            i_item      TYPE roijnomiio .
      DATA: i_order TYPE symsgv,
            i_return TYPE swd_return .
      DATA: i_vbak      TYPE vbak,
            i_vbap      TYPE vbap,
            i_ekko      TYPE ekko,
            i_ekpo      TYPE ekpo,
            i_bsoh      TYPE bapisdhd1,
            i_bsohx     TYPE bapisdhd1x,
            i_bpoh      TYPE bapimepoheader,
            i_bpohx     TYPE bapimepoheaderx,
            i_vbeln     TYPE vbeln_va,
            i_posnr     TYPE posnr_va,
            i_contr     TYPE vbeln_va,
            i_conit     TYPE posnr_va,
            i_ebeln     TYPE ebeln,
            i_ebelp     TYPE ebelp,
            i_pargr     TYPE pargr,
            i_thead     TYPE thead,
            i_line      TYPE tline,
            i_note      TYPE txw_note,
            i_new_vbeln TYPE vbeln_va,
            i_new_ebeln TYPE ebeln,
            i_wa_bsoi   TYPE bapisditm,
            i_wa_bsoix  TYPE bapisditmx,
            i_wa_bsop   TYPE bapiparnr,
            i_wa_bsos   TYPE bapischdl,
            i_wa_bsosx  TYPE bapischdlx,
            i_wa_vbpa   TYPE vbpa,
            i_wa_vbkd   TYPE vbkd,
            i_wa_bpoi   TYPE bapimepoitem,
            i_wa_bpoix  TYPE bapimepoitemx,
            i_wa_bpos   TYPE bapimeposchedule,
            i_wa_bposx  TYPE bapimeposchedulx,
            i_wa_bpop   TYPE bapiekkop,
            i_wa_ekpa   TYPE ekpa,
            i_message   TYPE char72,
            i_bapiretn  TYPE bapiret2,
            i_bapiret2  TYPE TABLE OF bapiret2 INITIAL SIZE 1,
            i_vbpa      TYPE TABLE OF vbpa INITIAL SIZE 1,
            i_vbkd      TYPE TABLE OF vbkd INITIAL SIZE 1,
            i_ekpa      TYPE TABLE OF ekpa INITIAL SIZE 1,
            i_bsoi      TYPE TABLE OF bapisditm INITIAL SIZE 1,
            i_bsoix     TYPE TABLE OF bapisditmx INITIAL SIZE 1,
            i_bsos      TYPE TABLE OF bapischdl INITIAL SIZE 1,
            i_bsosx     TYPE TABLE OF bapischdlx INITIAL SIZE 1,
            i_bsop      TYPE TABLE OF bapiparnr INITIAL SIZE 1,
            i_bpoi      TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
            i_bpoix     TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
            i_bpos      TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
            i_bposx     TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
            i_bpop      TYPE TABLE OF bapiekkop INITIAL SIZE 1,
            i_text_tab  TYPE TABLE OF tline INITIAL SIZE 1,
            i_line_tab  TYPE TABLE OF tline INITIAL SIZE 1,
            i_txw_note  TYPE TABLE OF txw_note INITIAL SIZE 1,
            i_oij_el_doc_mot TYPE oij_el_doc_mot .
      CONSTANTS: c_char_c VALUE 'C',
                 c_char_e VALUE 'E',
                 c_char_p VALUE 'P',
                 c_char_g VALUE 'G',
                 c_char_i VALUE 'I',
                 c_char_s VALUE 'S',
                 c_char_x VALUE 'X',
                 c_zsw(3) VALUE 'ZSW',
                 c_nomit_stat(4) VALUE 'ZDNY' .
      DATA : lv_nomtk_split        TYPE oij_nomtk.
      DATA : i_order_split_create  TYPE TABLE OF zsws_order_split.
      DATA : wa_order_split_create TYPE zsws_order_split.
      LOOP AT i_order_split_create INTO wa_order_split_create.
        IF NOT i_create_order IS INITIAL .
          CLEAR: i_create_order .
              MOVE: wa_order_split_create-docnr  TO i_ebeln,
                    wa_order_split_create-docitm TO i_ebelp .
              CALL FUNCTION 'ME_EKKO_SINGLE_READ'
                   EXPORTING
                        pi_ebeln         = i_ebeln
                   IMPORTING
                        po_ekko          = i_ekko
                   EXCEPTIONS
                        no_records_found = 1
                        OTHERS           = 2.
              IF sy-subrc <> 0 .
              ENDIF .
    Fill PO Header
              i_bpoh-comp_code   = i_ekko-bukrs .
              i_bpoh-doc_type    = i_ekko-bsart .
              i_bpoh-vendor      = i_ekko-lifnr .
              i_bpoh-langu       = i_ekko-spras .
              i_bpoh-pmnttrms    = i_ekko-zterm .
              i_bpoh-purch_org   = i_ekko-ekorg .
              i_bpoh-pur_group   = i_ekko-ekgrp .
              i_bpoh-currency    = i_ekko-waers .
              i_bpoh-agreement   = i_ekko-konnr .
              i_bpoh-incoterms1  = i_ekko-inco1 .
              i_bpoh-incoterms2  = i_ekko-inco2 .
    Fill PO update indicator 'X'
              i_bpohx-comp_code  = c_char_x .
              i_bpohx-doc_type   = c_char_x .
              i_bpohx-vendor     = c_char_x .
              i_bpohx-langu      = c_char_x .
              i_bpohx-pmnttrms   = c_char_x .
              i_bpohx-purch_org  = c_char_x .
              i_bpohx-pur_group  = c_char_x .
              i_bpohx-currency   = c_char_x .
              i_bpohx-agreement  = c_char_x .
              i_bpohx-incoterms1 = c_char_x .
              i_bpohx-incoterms2 = c_char_x .
              CALL FUNCTION 'ME_EKPO_SINGLE_READ'
                   EXPORTING
                        pi_ebeln         = i_ebeln
                        pi_ebelp         = i_ebelp
                   IMPORTING
                        po_ekpo          = i_ekpo
                   EXCEPTIONS
                        no_records_found = 1
                        OTHERS           = 2.
              IF sy-subrc <> 0 .
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
              ENDIF .
    Fill PO Item
              i_wa_bpoi-po_item    = i_ekpo-ebelp .
              i_wa_bpoi-material   = i_ekpo-matnr .
              i_wa_bpoi-plant      = i_ekpo-werks .
              i_wa_bpoi-stge_loc   = i_ekpo-lgort .
              i_wa_bpoi-quantity   = wa_order_split_create-qty_acptd .
              i_wa_bpoi-po_unit    = i_ekpo-meins .
              i_wa_bpoi-tax_code   = i_ekpo-mwskz .
              i_wa_bpoi-val_type   = i_ekpo-bwtar .
              i_wa_bpoi-item_cat   = i_ekpo-pstyp .
              i_wa_bpoi-acctasscat = i_ekpo-knttp .
              i_wa_bpoi-agreement  = i_ekpo-konnr .
              i_wa_bpoi-agmt_item  = i_ekpo-ktpnr .
              APPEND i_wa_bpoi TO i_bpoi .
    Fill PO Item update indicator 'X'
              i_wa_bpoix-po_item    = i_ekpo-ebelp .
              i_wa_bpoix-po_itemx   = c_char_x .
              i_wa_bpoix-material   = c_char_x .
              i_wa_bpoix-plant      = c_char_x .
              i_wa_bpoix-stge_loc   = c_char_x .
              i_wa_bpoix-quantity   = c_char_x .
              i_wa_bpoix-po_unit    = c_char_x .
              i_wa_bpoix-tax_code   = c_char_x .
              i_wa_bpoix-val_type   = c_char_x .
              i_wa_bpoix-item_cat   = c_char_x .
              i_wa_bpoix-acctasscat = c_char_x .
              i_wa_bpoix-agreement  = c_char_x .
              i_wa_bpoix-agmt_item  = c_char_x .
              APPEND i_wa_bpoix TO i_bpoix .
    Fill PO Item Schedule
              i_wa_bpos-po_item       = i_ekpo-ebelp .
              i_wa_bpos-sched_line    = '0001' .
              i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
              i_wa_bpos-quantity      = wa_order_split_create-qty_acptd .
              APPEND i_wa_bpos TO i_bpos .
    Fill PO Item schedule update indicator 'X'
              i_wa_bposx-po_item       = i_ekpo-ebelp .
              i_wa_bposx-sched_line    = '0001' .
              i_wa_bposx-delivery_date = c_char_x .
              i_wa_bposx-quantity      = c_char_x .
              APPEND i_wa_bposx TO i_bposx .
              CLEAR: i_pargr .
              SELECT SINGLE pargr
                INTO i_pargr
                FROM t161
               WHERE bstyp = i_ekko-bstyp
                 AND bsart = i_ekko-bsart .
              CLEAR i_ekpa[].
              CALL FUNCTION 'MM_READ_PARTNERS'
                   EXPORTING
                        application = c_char_p
                        ebeln       = i_ebeln
                        bstyp       = i_ekko-bstyp
                        pargr       = i_pargr
                   TABLES
                        x_ekpa      = i_ekpa.
              LOOP AT i_ekpa INTO i_wa_ekpa .
                i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
                i_wa_bpop-langu = sy-langu .
                IF NOT i_wa_ekpa-lifn2 IS INITIAL .
                  i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
                ELSE .
                  i_wa_bpop-buspartno = i_wa_ekpa-parnr .
                ENDIF .
                APPEND i_wa_bpop TO i_bpop .
                CLEAR: i_wa_ekpa, i_wa_bpop .
              ENDLOOP .
              CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
              CALL FUNCTION 'BAPI_PO_CREATE1'
                   EXPORTING
                        poheader         = i_bpoh
                        poheaderx        = i_bpohx
                   IMPORTING
                        exppurchaseorder = i_new_ebeln
                   TABLES
                        return           = i_bapiret2
                        poitem           = i_bpoi
                        poitemx          = i_bpoix
                        poschedule       = i_bpos
                        poschedulex      = i_bposx.
              i_order = i_new_ebeln .
              SHIFT i_order LEFT DELETING LEADING '0' .
              i_return-errortype = c_char_i .
              i_return-workarea  = c_zsw .
              i_return-message   = '064' .
              i_return-variable1 = i_order .
            loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
            append i_bapiretn to t_bapi_return .
          endloop .
          if t_bapi_return[] is initial .
             i_create_order = c_char_x .
               CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
                   EXPORTING
                        act_return = i_return. "Popup with new PO no.
          ENDCASE .                                     " Docind
        ENDIF .
      ENDLOOP.

  • IDOC/BAPI for Production order creation from Legacy system

    Hi all
    We are using an interface to create Production orders from legacy to SAP. Would you recommend an IDOC or a BAPI to create Production orders. If IDOC or BAPI then could you please mention which one?
    thanks a bunch

    Hi John,
    For your purposes, please use BAPI for production order creation from legacy system. There is no standard inbound IDoc available to use. SAP has an IDoc for outbound interface only (message type LOIPRO).
    If there is an inbound IDoc available, I would recommend to use an IDoc.
    IDoc technology has excellent error handling and will allow you to reprocess an error (if any).
    BAPI is also good approach to use and fast in term of  processing.
    For BAPI approach, you can use BAPI BAPI_PRODORD_CREATE.
    Hope this will help.
    Regards,
    Ferry Lianto

  • Can u tell me any predefined BAPI for change and creation of Material

    Hi,
        Can anybody tell me  predefined BAPI for change and creation of Materialmasterand Pricing?
    Thanks & regards,
    Gopianne.

    you can use the BAPI to BAPI_MATERIAL_SAVEDATA create as well as to change material master.
    When changing material master data, you need enter only the material
    number.
    In the header data, you must select at least one view for which data is
    to be created. Depending on the view selected, you must maintain other
    required parameters. If you do not enter values for all of the required
    parameters, the method is ended with an error message.
    The corresponding fields in the tables (such as CLIENTDATA) must first
    be supplied with data by the calling program. An indicator must also be
    set for each of these fields so that the data is written to the database
    by the method. This requires the calling program to supply the
    corresponding field with the indicator in a checkbox table (for example,
    CLIENTDATAX). Checkbox tables exist for tables that do not contain any
    language-dependent texts (MAKT, MLTX), International Article Numbers
    (MEAN), or tax classifications (MLAN). Several data records for a
    material can be created in these tables.
    regards
    vivek
    reward points if it helps

  • Simple WebService Creation using JDeveloper 11.1 Technology Preview 2

    Hi,
    I like the way JDeveloper simplifies the web service creation using the wizards and allows to test the web services from the IDE itself.
    I have the following issues when I tried the step-by-step tutorial (http://www.oracle.com/technology/obe/obe11jdev/11/ws/ws.html) to build a web service. I greatly appreciate if some one can help me with these issues. This tutorial basically provides how to create a simple hello world kind of web service using JDev. Some of the steps are failing in my case.
    Failure 1) Unable to find the WSDL document
    When I invoke the "Test Web Service" menu item HTTP Analyzer is unable to locate the dynamically generated WSDL. I did try with and with-out proxy settings both the cases it failed. However I can see the WSDL if I go to the given WSDL URL in my web browser. I suspect I am missing some thing in Jdeveloper configuration. So I had to manually save the WSDL from the browser to go to further steps.
    Failure 2) Failure in the Response message
    When I invoke the request message I am getting the following error in the response:
    "The selected message is not a SOAP message". However, if I use the browser to test the web service, it is working fine.
    I greatly appreciate if you can provide me some insight into why JDeveloper is failing in these cases.
    Thanks
    Sunil

    It started working after I restarted the JDeveloper with no proxy settings. Seems to be after changing proxy settings JDev need to be restarted to take the preference changes to be effective in this case.
    Another interesting aspect that I noticed was, when HTTP analyzer is running it dynamically sets the proxy in the preferences settings as localhost with the HTTP analyzer port.
    But anyway now I am able to run and test this webservice within the JDev itself.
    Regards
    Sunil

  • BAPI for Outbound Delivery Creation with reference to Sales Order

    Dear all,
    I'm on R/3 4.6B platform and to develop an RFC for outbound Delivery creation instead of using the standard VL01N transaction.
    I've review BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N thread which suggest BAPI_DELIVERYPROCESSING_EXEC .
    However, in 4.6B, that function module doesn't exist. Appreciate any suggestion and or workaround.
    Thanks.
    Steven
    Edited by: Steven Khoo on Mar 25, 2010 7:13 AM
    Edited by: Steven Khoo on Mar 25, 2010 7:14 AM

    Not required anymore

  • WLST Domain Creation using JRF template throws SQLRecoverableException

    I am working on domain creation using templates and included the JRF template to use OPSS functionality.
    I have run the RCU utility to create the required components that will have necessary tables to host OPSS data and also tested that it works with CC_STB user that i will use to connect from WLS.
    I am able to ping the database server having RCU components from the VM where i want to create and configure the domain but when i configure the LocalSvcTblDataSource with the same ip address and try to setup the OPSS datasources, it gives me "Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified Error Code: 17002"
    Below is my WLST python script:
    #=======================================================================================
    # Open a domain template.
    #=======================================================================================
    readTemplate("/u01/app/mw/Oracle_Home/wlserver/common/templates/wls/wls.jar")
    #=======================================================================================
    # Update the domain to enable the WebLogic Server domain with JRF and EM.
    #=======================================================================================
    addTemplate('/u01/app/mw/Oracle_Home/oracle_common/common/templates/wls/oracle.jrf_template_12.1.2.jar')
    addTemplate('/u01/app/mw/Oracle_Home/em/common/templates/wls/oracle.em_wls_template_12.1.2.jar')
    #=======================================================================================
    # Configure the Administration Server and SSL port.
    # To enable access by both local and remote processes, you should not set the
    # listen address for the server instance (that is, it should be left blank or not set).
    # In this case, the server instance will determine the address of the machine and
    # listen on it.
    #=======================================================================================
    cd('Servers/AdminServer')
    set('ListenAddress','')
    set('ListenPort', 7001)
    create('AdminServer','SSL')
    cd('SSL/AdminServer')
    set('Enabled', 'True')
    set('ListenPort', 7002)
    #=======================================================================================
    # Define the user password for weblogic.
    #=======================================================================================
    cd('/')
    cd('Security/base_domain/User/weblogic')
    # Please set password here before using this script, e.g. cmo.setPassword('value')
    cmo.setPassword('password')
    #=======================================================================================
    # Create and configure a JDBC Data Source, and sets the JDBC user.
    #=======================================================================================
    # Get RCU Configuration using RCU service table (STB) schema credentials
    cd('/')
    cd('JDBCSystemResource/LocalSvcTblDataSource/JdbcResource/LocalSvcTblDataSource')
    cd('JDBCDriverParams/NO_NAME_0')
    set('DriverName','oracle.jdbc.OracleDriver')
    set('URL','jdbc:oracle:thin:@XX.XX.XX.XX:15210/xe')
    set('PasswordEncrypted', 'password')
    set('UseXADataSourceInterface', 'false')
    cd('Properties/NO_NAME_0')
    cd('Property/user')
    cmo.setValue('CC_STB')
    getDatabaseDefaults()
    #=======================================================================================
    # Write the domain and close the domain template.
    #=======================================================================================
    setOption('OverwriteDomain', 'true')
    writeDomain('/u01/data/user_projects/domains/cc_domain')
    closeTemplate()
    #=======================================================================================
    # Exit WLST.
    #=======================================================================================
    exit()
    And the complete exception trace.
    Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
    Error Code: 17002
    Error: writeDomain() failed. Do dumpStack() to see details.
    wls:/offline/base_domain>dumpStack();
    com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: Domain Creation Failed!
    Domain Location: /u01/data/user_projects/domains/cc_domain
    Reason: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
    Error Code: 17002
    Exception:
    oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
    Error Code: 17002
      at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:55)
      at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1967)
      at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1126)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
      at java.lang.reflect.Method.invoke(Method.java:606)
      at org.python.core.PyReflectedFunction.__call__(Unknown Source)
      at org.python.core.PyMethod.__call__(Unknown Source)
      at org.python.core.PyObject.__call__(Unknown Source)
      at org.python.core.PyInstance.invoke(Unknown Source)
      at org.python.pycode._pyx5.writeDomain$15(/tmp/WLSTOfflineIni4846195865917165143.py:73)
      at org.python.pycode._pyx5.call_function(/tmp/WLSTOfflineIni4846195865917165143.py)
      at org.python.core.PyTableCode.call(Unknown Source)
      at org.python.core.PyTableCode.call(Unknown Source)
      at org.python.core.PyFunction.__call__(Unknown Source)
      at org.python.pycode._pyx93.f$0(<console>:1)
      at org.python.pycode._pyx93.call_function(<console>)
      at org.python.core.PyTableCode.call(Unknown Source)
      at org.python.core.PyCode.call(Unknown Source)
      at org.python.core.Py.runCode(Unknown Source)
      at org.python.core.Py.exec(Unknown Source)
      at org.python.util.PythonInterpreter.exec(Unknown Source)
      at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
      at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
      at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
      at weblogic.management.scripting.WLST.main(WLST.java:219)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
      at java.lang.reflect.Method.invoke(Method.java:606)
      at weblogic.WLST.main(WLST.java:29)
    Caused by: com.oracle.cie.domain.script.ScriptException: Domain Creation Failed!
    Domain Location: /u01/data/user_projects/domains/cc_domain
    Reason: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
    Error Code: 17002
    Exception:
    oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
    Error Code: 17002
      at com.oracle.cie.domain.script.ScriptExecutor.runGenerator(ScriptExecutor.java:3706)
      at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:991)
      at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1117)
      ... 29 more
    Caused by: com.oracle.cie.domain.security.external.ConfigSecurityException: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
    Error Code: 17002
      at oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration.initializeSubsystem(OpssSecurityConfiguration.java:129)
      at com.oracle.cie.domain.DomainGenerator.run(DomainGenerator.java:315)
      at java.lang.Thread.run(Thread.java:744)
    Caused by: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
    Error Code: 17002
      at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.checkIfFarmExists(OpssDomainConfigImpl.java:708)
      at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.configureDBSecurityStore(OpssDomainConfigImpl.java:339)
      at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.initializeSubsystem(OpssDomainConfigImpl.java:166)
      at oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration.initializeSubsystem(OpssSecurityConfiguration.java:126)
      ... 2 more
    Caused by: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
    Error Code: 17002
      at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.processJPAException(JpsDBDataManager.java:2088)
      at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.init(JpsDBDataManager.java:955)
      at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.beginTransaction(JpsDBDataManager.java:1459)
      at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.beginTransaction(JpsDBDataManager.java:1455)
      at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.<init>(JpsDbBootstrapImpl.java:162)
      at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.checkIfFarmExists(OpssDomainConfigImpl.java:679)
      ... 5 more
    Caused by: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
    Error Code: 17002
      at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:614)
      at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.getDatabaseSession(EntityManagerFactoryDelegate.java:186)
      at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.createEntityManagerImpl(EntityManagerFactoryDelegate.java:278)
      at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:304)
      at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:282)
      at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.getVersion(JpsDBDataManager.java:1027)
      at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.getEMFAndSubject(JpsDBDataManager.java:1124)
      at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.init(JpsDBDataManager.java:907)
      ... 9 more
    Caused by: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
    Error Code: 17002
      at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
      at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:319)
      at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:138)
      at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162)
      at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:690)
      at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:215)
      at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:554)
      ... 16 more
    Caused by: java.sql.SQLRecoverableException: IO Error: Unknown host specified
      at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:465)
      at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:546)
      at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:232)
      at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
      at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
      at java.sql.DriverManager.getConnection(DriverManager.java:571)
      at java.sql.DriverManager.getConnection(DriverManager.java:187)
      at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:98)
      ... 20 more
    Caused by: oracle.net.ns.NetException: Unknown host specified
      at oracle.net.resolver.HostnameNamingAdapter.resolve(HostnameNamingAdapter.java:191)
      at oracle.net.resolver.NameResolver.resolveName(NameResolver.java:133)
      at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:416)
      at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:687)
      at oracle.net.ns.NSProtocol.connect(NSProtocol.java:247)
      at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1109)
      at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:316)
      ... 27 more
    Any help/pointers/hints will be helpful
    Thanks,
    Santosh

    Hi Micheal,
    Thanks a Lot for your response.
    We have checked the OS requirements :
    System Itanium 11i (11.31) B.11.31.0803.318a Base Quality Pack Bundle for HP-UX 11i v3, March 2008+
    Response:
    ======
    We have the higher version installed for this quality pack.
    QPKBASE B.11.31.1109.367a Base Quality Pack Bundle for HP-UX 11i v3, September 2011
    2) Required Packages : HPDesktopDev (version B.11.31.01)
    Response:
    =======
    This package is also installed.
    X11MotifDevKit B.11.31.01 HP-UX Desktop Developer's Toolkit - X11, Motif, and Imake
    3) Required Operating System Patches
    PHKL_36248
    PHKL_36249
    PHSS_37202
    PHSS_37501
    PHCO_38050
    PHSS_38139
    Response:
    ========
    We have the supersets for these patches installed. The installation logs also confirm these patches at the OS level.
    Check Name:Patches
    Check Description:This is a prerequisite condition to test whether the patches recommended for installing the product are available on the system.
    Checking for PHKL_36248; found PHKL_36248. Passed
    Checking for PHKL_36249; found PHKL_36249. Passed
    Checking for PHSS_37202; found PHSS_37202. Passed
    Checking for PHSS_37501; found PHSS_37501. Passed
    Checking for PHCO_38050; found PHCO_38050. Passed
    Checking for PHSS_38139; found PHSS_38139. Passed
    Check complete. The overall result of this check is: Passed
    Regards
    Sumit Kapila

Maybe you are looking for

  • Migration form 9.0.4 to 10.1.2

    Hello, there is few months I have write a procedure to migrate our forms form 6i to 9.0.4, today the version 10.1.2 is available, and I need to know if a migration between 9.0.4 and 10.1.2 is necessary, I find no information about this subject. Thank

  • Production order status, header released, operations created

    Hello, I´m struggling with the following problem on production orders When you look to first line in the header you see that the order is on release. When you go to the operation operation overview the operations are still on created How is this poss

  • Apple once again has their head up their *****.  I'm buying a windows!

    I move a few files around to clean up my computer and now my iWeb site which has years of work done on it is now a blank document. I didn't touch the "all powerful" domain.sites file. All I did is move the site file around and now I have to build my

  • Photoshop crashing cs6 imac os 10.7

    Hello my adobe photoshop cs6 keeps crashing and closing. i have tried uninstalling and reinstalling it but still happens. this is the report. my other adboe software seems fine Process:         Adobe Photoshop CS6 [234] Path:            /Applications

  • Flash and mac-lion future of conflict

    hello - i realize that apple and adobe have had a bit of a feud recently. i tried out a flash application that required a security question in the "Adobe Flash Player Settings" window, and the left-click no longer works.  this is apparently a very we