FM that retrieve the inner authorization object BBP_ROLE using user's role

Hi Experts!
Do you know what Function Module can be use to retreive the inner authorization object BBP_ROLE using the user's role
e.g. BUYER : YT:PU:XXXX:BUYERROLE
Object       : BBP_ROLE      SRM: User function / Role
field name : BBP_ROLE      SRM: User function / Role
Activities
Sel      Activity      Text
x       EMP             Employee
x       OPP             Operational Purchaser
......etc
Thanks!

Hi
Execute Txn S_BCE_68001414 in debug mode, and figure out how system takes the inner authorizations through the flow of this program
Regards
Virender Singh

Similar Messages

  • What FM retrieve inner authorization object BBP_ROLE using the user's role

    Hi Experts!
    Do you know what Function Module can be use to retreive the inner authorization object BBP_ROLE using the user's role
    e.g. BUYER : YT:PU:XXXX:BUYERROLE
    Object       : BBP_ROLE      SRM: User function / Role
    field name : BBP_ROLE      SRM: User function / Role
    Activities
    Sel      Activity      Text
    x       EMP             Employee
    x       OPP             Operational Purchaser
    ......etc
    Thanks!

    Hi
    Execute Txn S_BCE_68001414 in debug mode, and figure out how system takes the inner authorizations through the flow of this program
    Regards
    Virender Singh

  • Fm or metod that retrieve the lock object name from the table name

    HI ALL,
    there is FM or method that retrieve the lock object name from the table name ?
    Best regards
    Nina

    CALL FUNCTION 'ENQUEUE_REPORT'            
    EXPORTING                                
    gclient                     = sy-mandt   
    gname                       = 'RCTMV'         "Table Name
      GTARG                       = ' '       
      GUNAME                      = SY-UNAME  
    IMPORTING                                 
      number                      =           
      SUBRC                       =           
      TABLES                                  
        enq                         =  lt_seqg3
    EXCEPTIONS                               
       communication_failure       = 1        
       system_failure              = 2        
       OTHERS                      = 3

  • How to add id to the existing Authorization Object

    Hi,
    I want to add one id to the existing Authorization Object,How to add this?
    Here is my Object and existing ID's
    authority-check object 'Z_W2WALL' for user sy-uname
              id 'ZFREEZE' field r_freeze
              id 'ZLI01' field r_li01
              id 'ZLI11' field r_li11
              id 'ZLI14' field r_li14
              id 'ZLI11R' field r_li11n
              id 'ZLI20' field r_li20
              id 'ZMI10' field r_mi10
              id 'ZUPLOAD' field r_upload
              id 'Z_ARTFRZ' field r_artfrz.
    Now for this i want to add
      id 'Z_BIN' field r_frz.
    How to do this?
    Thanks

    Hi Sai,
    as there are already defined other id's have been added, you could also do the same way
    but this will also done through your basis end, where for this id your basis team will provide the
    authority to this id for the same purpose..
    authority-check object 'Z_W2WALL' for user sy-uname
              id 'ZFREEZE' field r_freeze
              id 'ZLI01' field r_li01
              id 'ZLI11' field r_li11
              id 'ZLI14' field r_li14
              id 'ZLI11R' field r_li11n
              id 'ZLI20' field r_li20
              id 'ZMI10' field r_mi10
              id 'Z_BIN' field r_frz
              id 'ZUPLOAD' field r_upload
              id 'Z_ARTFRZ' field r_artfrz.

  • I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  need help

    I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  But when I have my external hard drive plug in the song will play with no problem.  What do I need to do to play my music without having the external harddrive plug in ????????  Please help

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • I've recently started to use Numbers but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use. Looks like I have the same situation on my iphone. Any guidance? Thanks.

    I've recently started to use Numbers on my macbook pro but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use.
    Looks like I have the same situation on my iphone.
    The only option I'm being given is to create an lCloud account.
    Any guidance? Thanks.

    The last thing you want is a second iCloud account. Try logging out and back in in System Preferences. If that doesn't work, I'd get AppleCare on the line.
    Jerry

  • Is there a way to create a smart folder in iTunes, that contains the most recent (say 10) used playlists?

    Is there a way to create a smart folder in iTunes, that contains the most recent (say 10) used playlists? By having this I would be three clicks (touches from what is recent).
    Thanks

    100s with about 30 folders, comprised on different moods, years, genre, favorites, audiobooks, podcasts. Being accessed from multiple Macs and Apple TVs.

  • Recently bought  a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found."

    Recently bought  a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found. Would you like to locate it?" Hope you can help me solve this issue.
    Thanks,
    Shellyboo

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • I cannot play music from my itunes library.  I keep getting an itunes message that says, "The song could not be used because the original file could not be found."  Is there a fix for this?  Thank you.

    I cannot play music from my itunes library.  I keep getting an itunes message that says, “The song could not be used because the original file could not be found.”  Is there a fix for this?  Has this happened to anyone else?  Is there a fix for this?  Thank you.

    Hello Turintest2,
    I am having a similar problem.  I have over 4000 songs giving me this error.  I certainily don't want to go in one by one and find them.  I know you wrote a script for Windows but I am a Mac user.  Is there a fix for me?  Here is the info on where the song is currently (used by doing the get info)
    Here's a shot of my preferences:
    Just FYI, I know that apparently iTunes is looking for this music in the trash.  However, if I go here:
    Then I find the music there as well.  (Which is where it is in my preferences.)
    Please help!  I don't want to have to go through over 4000 songs and update them one by one.

  • Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

    Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • Not able to view the 'proxy-to-remote' iView under 'user admin' role

    Hi All,
    I am not able to view the 'proxy-to-remote' iView under 'user admin' role. I need this for Remote role assignment for FBN .
    I am using the portal version EP 7.0.
    Can anybody help me .
    Thanks & Regards,
    Amit Kade

    Hi, Amit
    u have to assign the one iview in User-Admin role
      Goto->Contentadmin-> portal content->content provded by sap->Admin interface->iview template ->select proxy to remote role iview.
    and this iview assign to user admin role the u can able to see.
    if its solve please give me 10 points
    thanks & regards
    chitta

  • Authorization object  assigning to user profile

    Hi all,
      Wht are the steps involved in assigning authorization object S_GUI with activity 60 (S_GUI ACTVT=60) to the users profile.
    Thanks

    you can assign authorization profile to user through Role..
    goto PFCG, either create a new role or change an existing role(which the user has)
    go to authorization tab, change authorization, click manually button,
    add S_GUI and then click on values, select 60.. save the role, generate it..
    if it is new role that you have created, then go to SU01 - roles, add it.. save user..

  • Authorization object assignment on USERS

    Hi,
    i have to maintain authorization objects in transaction types and users in our company, such that the executives (management of all org. units) of the company are able to see all the transactions including activities within the whole company.
    on the other hand the employees (<b>not executives</b>, belonging to a specific org unit) should be able to see ONLY the transactions belonging to his org. unit
    useful info is avlbl at: http://help.sap.com/saphelp_crm50/helpdata/en/26/99973915e69238e10000000a11402f/frameset.htm
    but where and how are these authorization objects assigned?
    Kindly help, thnx, all answers appreciated.
    Jacob.

    hi Jacob,
    Look at <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/81/0e0f61b566dc44bbb4055b3ccd25be/frameset.htm">Identity Management</a> maybe it helps you.
    Regards.
    Manuel

  • Authorization objects to avoid users to access workbook design mode

    Hi all,
    Does anyone knows an authorization object that stops the user to enter workbooks design mode?
    We use workbook protection but this disables most of the workbook properties.
    Many thanks,
    Mazzz

    Hi..
    see this thread.. hope it helps..
    How to prevent workbook users from saving workbooks
    You must set up security to control who can save workbooks, where they can be saved, and which workbooks appear in the BEx Browser for a specific user.
    Workbooks can also be created in the BEx Analyzer. After executing a query, choose Save u2192 Save as new workbook.
    Securing Workbooks
    In order to save a workbook, a user needs two authorization objects. The two objects listed below are the minimum authorizations a user needs to save workbooks.
    S_GUI: Authorization for GUI activities
    S_BDS_DS: Authorizations for document set
    Using both S_GUI and S_BDS_DS will enable a user to save workbooks to their Favorites folder.
    The authorization object S_GUI has one field, Activity. The activity field must be set to 60. For S_BDS_DS, the user needs activities 03 and 30. The Class Type field should be set to OT.
    Saving Workbooks to Roles
    If a user wants to save aworkbook to a location where it can be easily accessed by others, they need to save to a Role rather than saving the workbook in their own Favorites folder. Saving to a Role means saving to a security role.
    You may want to set up roles specifically for saving workbooks. You can then assign the role to all parties who need to share workbooks.
    Another option is to not allow users to save workbooks, but rather only allow power users to save workbooks. This is done to maintain the roles and to ensure that the workbooks are manageable. This also prevents users from changing workbooks saved by other users.
    In order to save workbooks to roles, a user needs:
    S_USER_AGR: Authorizations: Role check
    S_USER_TCD: Transactions in roles
    The authorization object S_USER_AGR has two fields:
    Activity and Role Name.
    Activity field -Must have at least values 01, 02 and If the user can delete workbooks, they will also need value 06.
    Role Name, you should enter the specific roles you have created for saving
    workbooks. Use proper naming convention for roles so that the roles can be restricted pretty easily.  The role name is the name of a role that will be used to hold workbooks. Saving a workbook to a role actually updates the Menu portion of a role, so object S_USER_AGR is a required object.
    Authorization object S_USER_TCD has one field
    Transaction Code. The user needs value RRMX in this field.
    Once a workbooks is saved, the data and the layout is saved in the workbook. For security reasons, we recommend that users save workbooks without the data. To save the workbook without the data, the users selects from following menu path from the BEx Analyzer: Tools > All queries in Workbooks > Delete results
    Sathya
    Edited by: sathya prasad anumolu on Jul 30, 2008 4:58 PM

  • Authorization Object for using Object Services

    Can you tell me how to limit a users authorization to create or delete attachements using the object services functionality?  We'd like to control the addition and deletion of the attachments.  Is there a specific authorization object for this functionality?
    Thank you, Julie

    Hi julie;
    I hope that following are the solution for you problem. Check wheather this is helpful to you or not.
    Authorization Object C_DRAW_BGR (Authorization Group)
    The following table shows authorization object C_DRAW_BGR. This authorization object allows you to limit access to individual documents.
    Fields      Possible Values      Description
    BEGRU (Authorization group)      0000 - ZZZZ      Used to restrict the authorizations for document maintenance further.
    Authorization object C_DRAW_BGR can be used to restrict access to individual documents. It works like a simple on/off switch. If the check of object C_DRAW_BGR is fine, the user's authorization can be further restricted by checking C_DRAW_TCD (check only based on the document type) or C_DRAW_TCS (check of the
    combination of document type and status). At the fifth level there is a BADI called DOCUMENT_AUTH01, which you can use to design your own authority check.
    Authorization Object C_DRAW_DOK (Document Access)
    The following table shows authorization object C_DRAW_DOK. This authorization object controls which original data of a specific document type there are access authorizations for.
    Fields      Possible Values      Description
    ACTVT (Activity)      52 53 54 55 56 57      Change application start Display application start Display archive application Change archive application Display archive Store archive
    DOKAR (Document type)            Here you enter the document type that access to original data is allowed for.
    Authorization Object C_DRAD_OBJ (Object Link)
    The following table shows authorization object C_DRAD_OBJ. This object controls which users can process which document info records, based on a combination of activity, object, and status.
    Fields      Possible Values      Description
    ACTVT (Activity)      01 02 03 06      Create Change Display Delete
    DOKOB (Object)            You must enter the data base table for the objects here (for example, MARA for material record).
    STATUS (Document status)
    if useful rewards points.           
    Regards,
    nitin
    Edited by: nitin bhagat on Feb 18, 2008 6:23 AM

Maybe you are looking for