FM to get the previous sunday date based on current date(sy-datum)

hi all,
Is there any function module to get the previous sunday date based on current date(sy-datum)?
Regards,
Kapil Sharma
Moderator Message: Basic date related questions are not allowed
Edited by: Suhas Saha on Sep 19, 2011 11:39 AM

Hi,
There are function modules to find out the current day of the week depending on sy-datum. These are as below:
1. DATE_COMPUTE_DAY - Returns a number indicating what day of the week the date falls on. e.g. Monday is returned as a 1, Tuesday as 2,...., Sunday as 7.
2. RH_GET_DATE_DAYNAME - Returns the day based on the date provided, e.g. Monday, Tuesday,..., Sunday.
Using any of the above, if you can find out the current day, then you can calculate and compute the date of the previous Sunday.
My observation is that using the first FM might make the calculation simpler.
Hope this is of help to you.
Regards,
Shayeree

Similar Messages

FM to get previous sunday date based on current date(SY-DATUM)

hi all,
Is there any function module to get the previous sunday date based on current date(sy-datum)?
Regards,
Kapil Sharma

Hi Kapil,
You can follow the logic below:
data:
l_date like sy-datum, **TODAY
l_date2 like sy-datum, **Previous Sunday
data:
l_daynr like HRVSCHED-DAYNR.
*Get today's date
l_date = sy-datum.
*Gey today's day (Monday, Tuesday, etc.)
CALL FUNCTION 'HRIQ_GET_DATE_DAYNAME'
EXPORTING
langu = 'EN'
date = l_date
IMPORTING
daynr = l_daynr.
CASE l_daynr.
*If it is Monday
WHEN 1.
-Subtract 2 days for the previous Sunday
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 2
IMPORTING
ed_date = l_date2.
*If it is Tuesday
WHEN 2.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 3
IMPORTING
ed_date = l_date2.
*If it is Wednesday
WHEN 3.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 4
IMPORTING
ed_date = l_date2.
*If it is Thursday
WHEN 4.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 5
IMPORTING
ed_date = l_date2.
*If it is Friday
WHEN 5.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 6
IMPORTING
ed_date = l_date2.
*If it is Saturday
WHEN 6.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 7
IMPORTING
ed_date = l_date2.
*If it is Sunday
WHEN 7.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 8
IMPORTING
ed_date = l_date2.
ENDCASE.
Regards,
Dilek

Deriving previous Fiscal Period based on current date

Hi All,
I have a requirement wherein I need to derive the previous fiscal period based on the current date. Is there any standard FM to get the same? If not can you let me know if there is any other way of deriving it?
Thanks
Sundar

Hi Srinivas, thanks for your reply. What you have suggested will work fine if I am looking for current fiscal period. I want previous fiscal period. How do I get that?
Thanks
Sundar

Last month end date based on current date

Hi,
How to show last month end date based on the current date.
Eg:
Current date = "08/26/09"
Var- Last Month End Date = "07/31/09" etc...,
Please help me how to get it...
Thank You!

Good to hear that it worked for you. but not for me.
I tried like this:
1st::
1. var1= ToDate("06/30/09","MM/dd/yyyy")
2.Var2= RelativeDate([Var1];-DayNumberOfMonth([Var1]))
result: 5/30/09
2nd:
RelativeDate('6/30/2009';-DayNumberOfMonth('6/30/2009'))
result: 5/30/09
Am working on SAP OLAP cubes.
Please help me where am going wrong....
Thank You!

Calendar with preselected dates based on current date

Can we get the calendar to be prepopulated with todays' date and today-7 date as the default before it starts running the initial queries when I log into dashboard.
I have a calendar date range based on which my chart displays metrics. If I dont choose anything its picking up all the data first before I choose something
Your help is always appreciated.

I apologize I read your post too quickly and misunderstood your question. Unfortunately, I thought you were referring to a dashboard you had created and asking about setting up default dates for your bind variables/parameters.
Well I'll have to leave this one to someone else. Sorry I couldn't be more help.
David

Help needed in getting the previous Quarter Data

Hello folks,
I have this procedure where i have to modify the current procedure in the following manner:
I need to get rid of the variables p_start and p_end so that i cannot see them in the crystal report and include the Frequency in the procedure to get the Data based on the Dates.
and Main requirement is" If the Frequency is Quarterly " it should get the previous quarter Data, if "Frequency is monthly" it should return the previous month data.Can anyone please let me know where shud i make changes. Am including the procedure for refernce. Any help is appreciated
Thanks a millioin,
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h(report_record in out cr_return_types.gen_cursor,
p_start       string,
p_end         string)
IS
v_startdate date;
v_enddate date;
BEGIN
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));
open report_record for
select --distinct r.recovery_id
r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
sum(nvl(r.amount, 0)) as amt_received,
nvl(sum(case
when r.amount >= 0 then
rd.fees
else
rd.fees * (-1)
end),
0) as fees,
ec.close_date, *001* commented
(case
when ec.close_date <= to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS') then
ec.close_date
else
null
end) as close_date, --*001* added
get_case_value(ec.event_id, ec.event_case_id, v_enddate) as case_value,
nvl(etl.fee_percent_flag, 'N') workmans_comp,
max(to_char(r.recovery_date, 'FMMonthYYYY')) Year_Month,
max(to_char(r.recovery_date, 'YYYYMM')) Y_M,
max(to_date(to_char(r.recovery_date, 'MMYYYY'), 'MM/YYYY')) date_MY
from recovery r,
recovery_detail rd,
event e,
client c,
branch_group b,
employer_group g,
event_case ec,
event_type_lookup etl
where r.event_id = e.event_id
and r.event_case_id = ec.event_case_id
and ec.event_id = e.event_id
and rd.recovery_id(+) = r.recovery_id
and r.recovery_date between v_startdate and
to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS')
and e.client_id = c.client_id
and g.client_id = c.client_id
and b.client_id = c.client_id
and g.employer_group_id(+) = e.employer_group_id
and b.branch_group_id(+) = g.branch_group_id
and e.event_type_code = etl.event_type_code -- SST 130852 04/14/09
group by r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
ec.close_date,
get_case_value(ec.event_id, ec.event_case_id, v_enddate),
nvl(etl.fee_percent_flag, 'N')
having sum(nvl(r.amount, 0)) <> 0
order by c.client_code,
b.branch_group_code,
g.employer_group_code,
r.event_case_id;
Edited by: user11961230 on Oct 20, 2009 9:02 AM

user11961230 wrote:
1. I want to get rid of the p_start and p_end. So how do i declare the v_startdate and v_enddate in the following part?
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));I'm not sure what you mean by "declare".
In PL/SQL, "declare" means state (at the beginning of a block) that there will be a certain variable with a certain name (such as v_startdate) and datatype (such as DATE). You're already declaring the variables v_startdate and v_enddate correctly, right before the BEGIN statement.
Declaring a variable is not the same as initializing it, that is, giving it a value for the first time. Your next question seems to be about initializing..
2. where exactly shud i include the logic that u have mentioned. sorry a dumb questionIn place of the two assignment statments that reference p_start and p_end.
3. This time am gonna use frequency instead of report_type so that i will get rid of the p_start and p_end from the procedure.Do you mean you want to pass an argument (called frequency) that tells if you want a quarterly or a mionthly report, just like the variable report_type in my example?
If so, replace report_type in my example with frequency.
I think you want something like this:
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h
(      report_record         in out     cr_return_types.gen_cursor
,      frequency         IN           VARCHAR2
IS
     -- Declare local variables:
     v_startdate     date;
     v_enddate      date;
BEGIN
     -- Initialize v_startdate and v_enddate, depending on frequency
     IF frequency = 'QUARTERLY'
     THEN
          v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -3)
                                       , 'Q'
          v_enddate := TRUNC (SYSDATE, 'Q');
     ELSIF frequency = 'MONTHLY'
     THEN
          v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -1)
                         , 'MM'
          v_enddate := TRUNC (SYSDATE, 'MM');
     END IF;
     --   Subtract one second from v_enddate
          v_enddate := v_enddate - ( 1
                                        / (24 * 60 * 60)
     open report_record for
     select --distinct r.recovery_id
            r.event_id,
     and     r.recovery_date BETWEEN v_startdate
                     AND       v_enddate
     ...When you post formatted text on this site (and code should always be formatted), type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.
Edited by: Frank Kulash on Oct 20, 2009 2:37 PM
Changed query to use BETWEEN

How to get the previous state of my data after issuing coomit method

How to get the previous state of some date after issuing commit method in entity bean (It should not use any offline storage )

>
Is there any way to get the state apart from using
offline storage ?As I said the caller keeps a copy in memory.
Naturally if it is no longer in memory then that is a problem.
>
and also what do you mean by auditlog?
You keep track of every change to the database by keeping the old data. There are three ways:
1. Each table has a version number/delete flag for each record. A record is never updated nor deleted. Instead a new record is created with a new version number and with the new data.
2. Each table has a duplicate table which has all of the same columns. When the first table is modified the old data is moved to the duplicate table.
3. A single table is used which has columns for 'table', 'field', 'data' and 'activity' (update, delete). When a change is made in any table then this table is updated. This is generally of limited useability due to the difficulty in recovering the data.
All of the above can have a user id, timestamp, and/or additional information which is relevant to the data being changed.
Note that ALL of this is persisted storage.
I am not sure what this really has to do with "offline storage" unless you are using that term to refer to backed up data which is not readily available.

The backup disk image "/Volumes/Data/David Witkowski's Mac Pro.sparsebundle" is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message. I need some help to fix this.

The backup disk image “/Volumes/Data/David Witkowski’s Mac Pro.sparsebundle” is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message Where can I find this disk image?. I need some help to fix this.
Thanks,
David W

There are multiple answers and solutions if you look just to the right under the heading of More Like This.

Is it possible to get the updated table records based on date & time.

Is it possible to get the updated table records based on date & time in oracle.
Thanks in advance.

no, actually i am asking update records using 'UPDATE
or DELETE' statement, but not insert statement.
Is it possible?
I think we can do using trigger on table, but problem
is if i am having 20 tables means i have to write 20
trigger. i don't want like this.Of course it's still possible, typically you'll find applications with a column LAST_UPDATE, probably a LAST_UPDATED_BY and so on column. You don't say what your business need is, if you just want a one of query of updates to particular records and have a recent version of Oracle, then flashback query may well help, if you want to record update timestamps you either have to modify the table, or write some code to store your updates in an audit table somewhere.
Niall Litchfield
http://www.orawin.info/

How to get the previous record value in the current record plz help me...

In my sql how to get the previous record value...
in table i m having the field called Date i want find the difference b/w 2nd record date value with first record date... plz any one help me to know this i m waiting for ur reply....
Thanx in Advance
with regards
kotresh

First of this not hte mysql or database forum so don;t repeate again.
to get diff between two date in mysql use date_format() to convert them to date if they r not date type
then use - (minus)to get diff.

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

I have a problem with my Internet Security and the new Firefox, where can I get the previous version which I had before my system crashed?

Hi I use CA Internet Security Suite which checks ALL pages and searches, but it does not work with this version, also I wish to use Goggle Toolbar which ALSO does not work with this version where can I get the previous version? As my harddrive crashed I have had to install windows 7 and this version doesn't seem to allow me to change my homepage, why is this? Cheers Ernest

You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

I HAVE AN IPHONE 5S AND WANT TO USE SOFTWARE 7.0.2 BECAUSE IT IS COMPATIBLE WITH MY VEHICLE FOR UCONNECT. I CURRENTLY HAVE SOFTWARE 7.0.3 ON MY DEVICE. HOW WOULD I GET THE PREVIOUS SOFTWARE BACK ON MY PHONE

I HAVE AN IPHONE 5S AND WANT TO USE SOFTWARE 7.0.2 BECAUSE IT IS COMPATIBLE WITH MY VEHICLE FOR UCONNECT. I CURRENTLY HAVE SOFTWARE 7.0.3 ON MY DEVICE. HOW WOULD I GET THE PREVIOUS SOFTWARE BACK ON MY PHONE

Forum Tip: It is generally considered inappropriate to type all in uppercase letters in Internet discussions, as text that is typed all in uppercase is by convention considered to be shouting. Uppercase is also more difficult to read, so please use all uppercase sparingly and only when you really mean to shout, which we hope you won’t need to do here .
Regards.

When back up to time capsule I get the message no access to backupcopyfiledisc/Volume/data/imac.sparsebundle ( error - 1 )

When back up to time capsule I get the message no access to backupcopyfiledisc/Volume/Data/Terjesumac.sparsebundle ( error-1)

Try #C17 in Time Machine - Troubleshooting for known fixes. Works for me as well.
http://pondini.org/TM/Troubleshooting.html

How to get the previous version of Flash professional?

I need to install flash proffessional on 32 bit computer? How can I get the previous version as the Flash ProfessionalCC requires 64 bit?
Many thanks for help.

Hi Barbara,
Flash Professional CS5.5 is a 32-bit application which can be installed on computers with either 32-bit or 64-bit operating systems.
You can purchase this by Adobe's backward Licensing policy :
" Adobe allows program members to order a current-version license but use a prior version. These members can contact Adobe Customer Service to request a serial number for the earlier version if they do not already have one. Prior-version software is available via ESD and can be purchased through standard resellers. The program member must follow all guidelines of the current-version EULA. "
Please check the doc : http://www.adobe.com/volume-licensing/policies.html

FM to get the previous sunday date based on current date(sy-datum)

Similar Messages

Maybe you are looking for