FM to retrieve the telephone number

HI,
Is there any FM that can be used to determine the Service order number using the Activity number as parameter and also the telephone number of partner asscoiated with that Service order.
Thanks and regards,

Hi Avinash,
Do you want to find Service Order Object ID from Order GUID? If thats the case you could do fetch the Object ID from CRM standard table CRMD_ORDERADM_H by keying in the Object GUID.
In order to retrieve the telephone number of the associated partners, you could use the standard function module BUPA_ADDRESS_GET_DETAIL by passing the Partner number and validity date. Check for return table ET_ADTEL.
Hope this helps.
Regards,
Pavithra
**PS: Please reward points if this helps.

Similar Messages

  • If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it !

    If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it ! It wont activate. I just recentely got AT&T.  When I had verizon before and my phone got disconnected it allowed me to still iMessage off my number.

    If your phone service is disconnected, it's not your number any more.
    If you "just got AT&T", how can it be disconnected?

  • Function module to retrieve the account number linked to an SD invoice item

    Hi all,
    I should retrieve the gl account number linked to a certain SD invoice item. The
    program starts from VBRK and VBRP data. Is there a function module which
    enables to get it starting from these header lines? I already used the function
    module: RV_INVOICE_ACCOUNT_DETERM ( release: 4.0 ), but in some cases it
    doesn't seem to function properly ( the export table TKOMV doesn't contain a
    value for the SAKN1 field ). For the invoices for which the function isn't able to
    retrieve the account number, the standard accounting analysis functionality returns
    the following message: account determination carried out via KOFI type. So I'm
    searching for a function module that's able to retrieve the account number in these
    cases also.
    Thanks in advance.
    Adriano.

    Dear Adriano,
    Try with Function Module 'SD_DETERMINE_ACCOUNT_INVOICE '.
    Additional Info:
    BAPIs related salesorder:
    BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
    BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
    BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
    BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
    BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
    BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
    BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
    BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
    FM:
    MB_ADD_PURCHASE_ORDER_QUANTITY (Reading and adding open purchase order quantities)
    SD_SALES_ORDER_STATUS_WWW for complete details including the delivery information.
    Hope this will help.
    Regards,
    Naveen.

  • How to retrieve the vendor number during creation of Purchase Order?

    Dear SAP experts,
    For our Purchase Orders, during PO creation (t-code ME21 or ME21N) we want to achieve the following:-
    1) default the delivery address to our plant A address if the vendor is local and
    2) default the delivery address to our plant B address if the vendor is foreign.
    At the moment, we are trying to use the user exit enhancement "MMDA0001" to achieve the above.
    The problem is how to retrieve the vendor number from the screen so we could pass the vendor number to ZXM06U32 to check the ktokk field in LFA1 table in the whether the vendor is foreign or local.
    Thank you in advance.
    Regards,
    Alex

    u can do one thing, create 2 partner function, like 1 for local, and second for import vendor.
    or make 2 batch  n activate vendor batch and make mandatory field from SPRO. 
    then goto SHD0, and do one by one step. first time take 1st requirement and second time take second . like that make two variant .
    i dont know how much it will be helpful. bt i want to suggest smth like that only.
    or, go for ABAPER help
    thanks
    nisha

  • Any SAP standard report is used to retrieve the inventory number based Asse

    Hi all
    Any SAP standard report is used to retrieve the inventory number based Asset ID.
    Please help us to provide the standard report.
    Regards
    K.Gunasekar

    Hi,
    Create the Sort version with field Inventory no, so that you can display Inventory no details in all Asset report.
    You can get "Inventory no" details by including field "INVNR" in Sort versions for Asset reporting(T.code - OAVI).
    Hope this information helpful for you.
    Thanks & Best Regards,
    M.Ganesan

  • Alerts not retrieving the correct number of records

    Hi,
    I have created alerts to run plans. These plans are getting records from DB and populating the ADC. The alerts are getting executed but are not retrieving the correct number of records.
    I have created 5 alerts to run 5 plans all in the same time. The error at the "Data Flow service status" window is :
    CACHED RESULT
         REQUEST ID: {4EB6B955-96B3-4AF2-B836-6C9F417D47A6}
         EXECPLAN ID: {11372B4D-9ACE-4CFB-831F-11028FF996D5}
         EXECPLAN NAME: xxxx
         FIX COUNT: 0
         START TIME: 6/8/2006 12:00:01 PM
         EXECUTION TIME: 0:00:00
         Sink Records Blocks Disk Blocks Fix Count Hit Count Execution Status
         0: 0 0 0 0 0
    Complete - ERROR Error while processing the data for the step 'SQL Query'
    This error is seen for 2-3 plans .......
    But if i execute the plan manually from design studio there is no error.
    So
    1. Do i need to change anything in the config files to increase the MAx memory block?
    2. Is there any way, the plans can be run one at a time i.e. configure alerts in such a way that if one plan finishes the other one starts automatically? Currently i have scheduled the plans to run at the same time using Alerts..
    Please help...
    Thanks

    Here is one 'culprit' you can verify. Open DesignStudio. You should "--not--" see any grids or icons on (near) the botton status row. If you see them - right click and delete them. These are plans with same_names put in 'locked' state. After you do this. close your design studio.
    Note- if you ever open a plan in designstudio, always "save" it and close it (exit). Donot click on window [x] mark to close the appl.
    After above verifrication -- restart EnterpriseLink and restart PlanMonitor, verify if everything runs fine.
    --sanjeev                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Retrieving the row number where a certain value exists

    Hi,
    I wanted to find out if there is a way to retrieve the row number of a row where a certain value exists. For example, if I had a query
    Create or replace Procedure p1
    IS
    v_Stmt varchar2(100);
    BEGIN
    v_Stmt := 'Select * from emp where lname = 'Davis'';
    Execute Immediate v_Stmt;
    END;
    SQL> exec p1;
    Then, I would like to find out that this name is on row 3.
    Can anyone tell me how this can be done?
    Thanks in advance.
    Sincerely,
    Nikhil Kulkarni

    theres is no rownum related to a particular row. A rownum is a pseudocolumn which value may be different for the same row depending on the query you do. What you can use is the rowid which is the row's address.
    HTH
    Maurice

  • I cannot retrieve the serial number of the product i have purchased and installed once on my PC

    i cannot retrieve the serial number of the product i have purchased and installed once on my PC?!!!
    and there is no way to connect to anyone to get it.

    Hi,
    If you have purchased multiple license, please go to About_LWS to know how to Retrieve Serial Number.
    Thanks,
    Saurabh Rai

  • How to update the telephone number for a contact person in VAP2.

    hi,
          I want to update the telephone number for a particular contact person in VAP2 from custom transaction. I tried for BDC,
    but it was not updating. Could you plz any one help to solve this issue.

    Try these bapis;
    BAPI_CUSTOMER_CHANGEFROMDATA
    BAPI_CUSTOMER_CHANGEFROMDATA2
    BAPI_ADDRESSORG_CHANGE
    or BAPI_ADDRESSPERS_CHANGE
    Edited by: deniz kaylan on Apr 30, 2010 8:55 AM

  • Retrieving the row number of a specific record from the results of a MySQL query

    I want to create a MySQL query that will return a list of
    records, and then retrieve the row number of a record with a
    specific ID. How can I do this?
    *server-side script: PHP

    <?php
    $i = 0;
    do {
    $i++;
    } while (mysql_fetch_assoc($rsWhatever) &&
    $row_rsWhatever['ID'] !=57);
    echo "TADA -" . $i;
    ?>
    (assuming that ID is numeric, and that the test value
    actually exists in the
    database)
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "AngryCloud" <[email protected]> wrote in
    message
    news:g4e6ck$hrb$[email protected]..
    >I will use this scenario for an example:
    >
    > I want to know how far down the list I will find the ID,
    '57'.
    >
    > So I manually look at the list of results and see it is
    the 25th record
    > down
    > on the list.
    >
    > How do I get my PHP script to get this number (25)
    automatically?
    >

  • I want to find out how to retrieve the serial number for my product. i can't find it in my email

    i want to find out how to retrieve the serial number for my product. i can't find it in my email

    Find your serial number quickly

  • My computer crashed, I don't have the serial number for lightroom 4.  Is there any way to retrieve the serial number.  I can't remember where I purchased this.

    My computer crashed, I don't have the serial number for lightroom 4.  Is there any way to retrieve the serial number.  I can't remember where I purchased this.

    Lfiles37 if the serial number has been registered then it will be available under your account.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • I lost my itouch (4th gen.) on Thursday at 6pm, and I would like as much feedback on ways to track it. How do I retrieve the serial number?

    I lost my itouch (4th gen.) on Thursday at 6pm, and I would like as much feedback on ways to track it. How do I retrieve the serial number by launching itunes?

    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Type your questionI am trying to deactivate a version and transfer it to another computer, however I have lost the card with the serial number. Is there any way of retrieving the serial number?

    Type your questionI am trying to deactivate a version and transfer it to another computer, however I have lost the card with the serial number. Is there any way of retrieving the serial number?

    Hello Irene,
    you should have a look at Adobe's database, to see what's stored/saved about your accounts. Here you will find general infos about your Adobe Account
    https://www.adobe.com/account.html and to find your serial number have a look there http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    Hans-Günter

  • How do I retrieve the Identifier number from iPad 2, running iOS 5.1.1?

    I am trying to de-bug a game on my daughter's iPad 2, running iOS 5.1.1, and want to send the Advertising Identifier number to the game developer. However, I seem to be unable to retrieve the number.
    I tried downloading the app "the identifiers," but whenever I click "i" to enable numbers, it crashes.
    Also, when I visit the apple support page for retrieving the advertising identifier name, it says to enter "oo.apple.com" on the device, but that link seems to only redirect back to itself.
    Very frustrating. How else might I locate the Advertising Identifier?
    Message was edited by: chris romano

    Oh, another mistake on my part!
    I need to ENABLE the identifier on the iPad2 iOS 5.1.1... this should get The Identifier app working, and then I can read the number and tell them.
    However, on iOS 5.1.1, there is no Settings > Privacy > Advertising that I have been able to find.
    I apologize for all the fumbles on my end... I put this problem down a week ago and I am just picking it back up, so I kind of forgot some important details. Doh!

Maybe you are looking for