Font issues with ATM and new O/S install

I have had to reformat my h/d and now have issues with fonts. I see that I have several different versions of Minion and Myriad installed on my PC, when viewing through both the windows font manager and ATM, yet these same versions are not availble to me when I am in Pagemaker or Word. I suspect it has to do with Multiple Masters but I am unsure how to fix the problem. Any ideas?

Multiple master fonts can still be happily used with XP, but Vista doesn't support them or ATM (which is needed to use them). (There is apparently a workround to install MM fonts on Vista, but I haven't read much about it.)
Anyway, have you installed the multiple master fonts? You've listed the OpenType versions but don't say if you've installed the MM versions. If you haven't, you'll get substitution in files originally created with those fonts. If you have, you still may not have created the specific custom instances used in the files, in which case you'll have to use ATM to create those instances.

Similar Messages

Font issue with InDesign and OS 10.6

I have read quite a bit on this but have found no resolution. We installed OS 10.6 on two of our three G5 Macs at work. We use InDesign CS4 and OS 10.6.5.
When we open an InDesign file that we all share, the machines with 10.6 on it say fonts are missing. (I believe this is a naming convention problem.) I learned that some of the fonts for InDesign should be moved to the InDesign font folder. We did that. That helped on several of the fonts. However, we still have an issue with Helvetica Neue, and Universe (67 or other numbers). I have the same Universe font family listed, but when I go to find 67 or 47, they aren't there.
Anyone else having this problem? Do we need to go in to every document and change the fonts to avoid this error? Is there a better fix?

I have just swapped from an old Mac Mini (using 10.4.11) to the new Mac Mini (using 10.6.6). I did not do any fiddling about fonts. Everything is as it installs. The only thing I did is to resolve duplicate fonts in Font Book.
For convenience, I used Arial for documents. Now when I open an ID document, it says Arial[TT] (as well as bold, italic...) is missing. I checked the Arial ttf group is in /Library/Fonts, but in ID font list, it shows an Open type.
All I want is that the fonts should work, when I open all the InDesign documents (still in CS2 Version) that I created since last five years. I am no techie by any means, what I need is a step-to-step to solve the font issue, so that I can get on work immediately.
Any concrete step-to-step advice is highly appreciated.

Sudden banding issue with Mac and new Canon printer, already called tech

Good morning fellow Elementites.
I have been using Photoshop Elements 12 on my MacBook Pro 13 inch, running Maverick OS, printing to HP Photosmart Premium all-in one with no banding issues, ever.
I did want to upgrade my printer and monitor so I purchased the Canon Pixma Pro 100 and a new external LG IPS monitor to view the PSE program.
I also purchased ColorMunki Display to calibrate the monitor. Everything is operational with the recommended settings for color etc.
I printed a .tiff image and a .jpg through the PSE print function. The images that looked perfect on the new monitor and Macbook monitor printed with banding. I called Canon tech support. The man had me perform a few tasks to make sure the printer was operating correctly. We printed test sheets from the printer and they were all as they should be.
He the said he NEVER prints from PSE. He edits in PSE but prints using Canon's EZ share or print or whatever it's called, doesn't matter cause I do NOT LIKE IT AT ALL. Not to mention it is just another step in the work flow. Not to mention that I paid good money for a photo editing program of high quality and I want to use ALL the features.
He said the problem isn't the printer but the printing software instructions TO the printer via the Mac OS printer system, or something like this is what he said. He also had me download some other updates and driver files. He then had me remove the printer from my printer list and then add it back.
He then had me print the .jpg image, (it only prints .jpg which is annoying as heck,) and it came out SO BEAUTIFUL I ALMOST CRIED
I want to print this quality THROUGH PSE. Does anyone have a clue as to what to do to resolve the issue? None of the suggestions in other threads from the past seem appropriate enough.
Eager to hear,
Regards.

I have returned home and have copied down all the settings so that I may post them here before I do any more fiddling. Maybe something glaring will be spotted before I start changing things.
I opened an image in PSE 12.
I chose from the PSE menu at the top of the monitor, FILE >PRINT
A window appears with my photo and boxes and such: 1. Select Printer> CANON PRO 100-SERIES (The other printer isn't concern now).
Select Paper Size and Orientation, no problems with this or any of the other settings in this window.
I then select MORE OPTIONS button at bottom of window.
Another window opens.
There are 3 options listed on the left hand side PRINTING CHOICES which it is automatically on, CUSTOM PRINT SIZE which I haven't needed yet, and COLOR MANAGEMENT.
I select COLOR MANAGEMENT.
COLOR HANDLING is set to PRINTER MANAGES COLOR.
IMAGE SPACE is listed, not in any box, as sRGB IEC61966-2.1
PRINTER PROFILE is listed in a box that is grayed out and not selectable, as CANON IJ COLOR PRINTE...
RENDERING INTENT is set in a selectable box as RELATIVE COLORMETRIC.
(There is a little mssg below all this that reminds me to remember to enable color management in the printer preferences dialog. I was never able to find this action and after doing some research I read that this mssg is a boo boo as the function is automatic in MAC running Maverick, supposedly).
I then click OK and the box goes away.
I then click the PAGE SET UP button.
A window titled PRINT opens.
The Printer selection box says CANON PRO=100 series.
The next box always confuses me because nothing in the list appears to pertain to me when I want to print my photos. It is the Presets box.
I believe FAST PRINTING ON PLAIN PAPER is always showing when I open this window. But I don't want that so I always look to see if there is something I should choose that applies. I don't know what they mean by DEFAULT SETTINGS in this case. LAST USED SETTINGS would be ok if that was what I wanted each time I printed. FAST and FINE on Plain Paper? I have been assuming they mean plain copy paper so I don't choose that. SAVE CURRENT SETTINGS AS PRESET, I don't choose that because I haven't been sure of the settings. And the SHOW PRESETS does me no good becuase you can't change anything in there.
PAPER SIZE, not an issue at the moment.
LAYOUT button is my next stop, by now I am exhausted
I look at COLOR MATCHING which shows CANON COLOR MATCHING as the selected method. (The other choice is COLOR SYNC but I don't know anything about that one and haven't been told to change it.)
PAPER HANDLING & COVER PAGE, N/A at this time.
QUALITY & MEDIUM. I choose my paper type, paper source, print quality which for my photos I select HIGH. I don't touch COLOR OPTIONS because that is scary looking. And BORDER and MARGIN I have no issue with.
I then hit SAVE and the window closes.
Then I select PRINT in the lower right of the window that has my photo in it and from which I acessed all these other things.
Phew. So, can anyone tell me if they see anything wrong here, PLEASE.
Regards,
P.

Issues with BootCamp and mounted windows 8 install disk

I've been trying to install Windows 8 from a mounted Windows 8 System Builder install disk. When I mount the ISO and try to use bootcamp to install windows 8 the bootcamp application will not recognize the install disk I have mounted. Any issues? I've also attempted to install the disk on USB with no luck. The reason I need the mounted ISO is because my DVD drive is busted. I created ISO on a friends macbook pro by using disk utility. I have the dmg file, cdr file, and iso file but have had no luck with any of them. Can anyone help? I'd really like not to have to have to buy an external DVD drive.

Google is your friend. Easy? Probably not but it appears doable. Proceed at your own risk.
http://arstechnica.com/information-technology/2012/11/no-support-no-problem-inst alling-windows-8-on-a-mac-with-boot-camp/

Font issue with Chrome and office and PDF's ect...

Hi
I went to restore my mac fonts in the "Font book" app as it was taking a while to load up fonts when I wanted to change a font in word and since doing that programs such as word have been playing up especially when I use the equation editor. I've also noticed that google chrome has issues displaying PDF's correct.
They show up like this
http://i.gyazo.com/6e702416d076ed13ed881f6bbd2a7949.png
On word, the equation editor is now blank.
Also, my document looks like this before clicking "insert new equation"
http://gyazo.com/c4391dee5a2b0bf32f86130d88556986
After I insert a new equation the whole document turns like this
http://gyazo.com/d4b2514eb7c039bfe8eda7b486c2f637
If it means anything these programs were running when I restored the font book and have not restarted my macbook pro.

Hi
I went to restore my mac fonts in the "Font book" app as it was taking a while to load up fonts when I wanted to change a font in word and since doing that programs such as word have been playing up especially when I use the equation editor. I've also noticed that google chrome has issues displaying PDF's correct.
They show up like this
http://i.gyazo.com/6e702416d076ed13ed881f6bbd2a7949.png
On word, the equation editor is now blank.
Also, my document looks like this before clicking "insert new equation"
http://gyazo.com/c4391dee5a2b0bf32f86130d88556986
After I insert a new equation the whole document turns like this
http://gyazo.com/d4b2514eb7c039bfe8eda7b486c2f637
If it means anything these programs were running when I restored the font book and have not restarted my macbook pro.

Font issue with Webdings and Zaph Dingbats

Since the last round of updates for 10.6, I have lost use of Webdings and Zaph. When I go into my font book, I can see the symbols there; however, standard letters appear when trying to choose those fonts in any program, native or otherwise.
I am up to date, ran utilities permissions, tried to search for some current info on the topic but haven't had any luck so far.
I can drag and drop from Character Viewer, but would like to get back the use of my programs' internal font choice abilities.
Shanna

You have to use Character Viewer I think. OS X is fully Unicode and usually no longer tolerates mapping symbols to the codepoints reserved for Latin characters, so you cannot input them from the keyboard.

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best
My wife have iPhone 4 and ipad new is not updated it working good and my devices after update working bad :-(, likely the devices of my wife stay with 5.1.1

good thing i havent updated mine yet..

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
Has it returned to normal for you?

Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?

Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?
Using 10.6.8 on MacBook Pro
Mikeaaa

I am running Snow Leopard. Transferring the same texts to TextEdit has no problems, so this is a Pages problem, I think. Corruption of Times New Roman and Arial fonts, I suspect, but where? and what do I do about it? I just need to be pointed to a source of advice, I think.
Thanks
Mikeaaa

An issue with authentication and authorization on ISE 1.2

Hi, I'm new to ISE.
I have an issue with authentication and authorization.
I have ISE 1.2 plus patch 6 installed on VMware.
I have built-in Windows XP supplicant and 2960 cisco switch with IOS c2960-lanbasek9-mz.150-2.SE5.bin
On supplicant I use EAP(PEAP) with EAP-MSCHAP v2.
I created authentication and authorization rules with Active Directory as External Identity Source. Also I applied authorization profile with DACL.I login on Windows XP machine under different Active Directory accounts. Everything works fine (authentication, authorization ), but only for several hours. After several hours passed , authentication and authorization stop working . I can see that ISE trying authenticate and authorize users, but ISE always use only one account for authentication and authorization . Even if I login under different accounts ISE continue to use only one last account.
I traied to reboot switch and PC,but it didn’t help. Only rebooting of ISE helps. After ISE rebooting, authentication and authorization start to work properly for several hours.
I don’t understand is it a glitch or I misconfigured ISE or switch, supplicant?
What should I do to resolve this issue?
Switch configuration:
testISE#sh runn
Building configuration...
Current configuration : 7103 bytes
! Last configuration change at 12:20:15Tue Apr 15 2014
! NVRAM config last updated at 10:35:02 Tue Apr 15 2014
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname testISE
boot-start-marker
boot-end-marker
no logging console
logging monitor informational
enable secret 5 ************
enable password ********
username radius-test password 0 ********
username admin privilege 15 secret 5 ******************
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 172.16.0.90 server-key ********
aaa session-id common
clock timezone 4 0
system mtu routing 1500
authentication mac-move permit
ip dhcp snooping vlan 1,22
ip dhcp snooping
ip domain-name elauloks
ip device tracking probe use-svi
ip device tracking
epm logging
crypto pki trustpoint TP-self-signed-1888913408
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1888913408
revocation-check none
rsakeypair TP-self-signed-1888913408
crypto pki certificate chain TP-self-signed-1888913408
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh version 2
interface FastEthernet0/5
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/7
interface Vlan1
ip address 172.16.0.204 255.255.240.0
no ip route-cache
ip default-gateway 172.16.0.1
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
deny icmp any host 172.16.0.1
permit ip any any
ip radius source-interface Vlan1
logging origin-id ip
logging source-interface Vlan1
logging host 172.16.0.90 transport udp port 20514
snmp-server community public RO
snmp-server community ciscoro RO
snmp-server trap-source Vlan1
snmp-server source-interface informs Vlan1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification change move
snmp-server host 172.16.0.90 ciscoro
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-Alex
address ipv4 172.16.0.90 auth-port 1812 acct-port 1813
automate-tester username radius-test idle-time 15
key ******
ntp server 172.16.0.1
ntp server 172.16.0.5
end

Yes. Tried that (several times) didn't work. 5 people in my office, all with vers. 6.0.1 couldn't access their gmail accounts. Kept getting error message that username and password invalid. Finally solved the issue by using Microsoft Exchange and "m.google.com" as server and domain and that the trick. Think there is an issue with imap.gmail.com and IOS 6.0.1. I'm sure the 5 of us suddently experiencing this issue aren't the only ones. Apple will figure it out. Thanks.

Font issue with left sidebar in Mail

I'm having perhaps another/different font issue with Mail after updating to Snow Leopard.
I do have a Dell 24" LCD hooked up to my MBP. I've noticed the comments/links related to the font smoothing issues. I've played around with that with no noticeable change.
Check out the before & after pics. Anyone have thoughts?
http://i625.photobucket.com/albums/tt336/marascoc/mac/beforeafter.jpg
Message was edited by: marascoc

Same issue here whenever I'm using a different color profile. Only the default color profile seems to work properly with the new sidebar in mail.

Uk date format issue with ASP and Access Database

I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Steve

stevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

Odd font issue with Safari, iWeb

Ok, so I've been having this odd font issue with Safari for quite a while now, and I haven't been able to fix it. Some text on several different websites come up in a different font than the default font for Safari. I've tried changing the default font to something else, changing the text encoding and nothing. This has been happening with several releases of Safari.
Now, last night I discovered the same thing is happening with iWeb. Some of the text fields come up with the same font as the one in Safari! I don't even know which font it is. So somehow these are linked.
I'm at work right now, but I can get a screen shot of the font once I get home.
Any ideas on how to remedy this?

Hi Tom, thanks for the response. I tried searching for those two fonts in my font book and they weren't in there. See below for screen shots of the odd text I'm getting:
iWeb
Uploaded with plasq's Skitch!
Safari
Uploaded with plasq's Skitch!
If anyone can help resolve I'd greatly appreciate it. As much as I like Safari, this odd font makes me close Safari after a few mins of browsing =\

Font issue with Safari

I've read of others having font issues with Safari 5.1 and Lion, but I still have Snow Leopard and am having an issue with some fonts showing as a block of As. This occurred when I set up Suitcase Fusion 3, but I did not touch any system fonts. I was able to solve part of the issue with activating Arial in the font manager, but some areas still do not reveal font, most notably, areas marked for username/password on forms. Any ideas? Btw, I do not seem to have a problem in Chrome or Firefox.

Thanks, Carolyn. I use a third party font manager but disabling it is not an answer for me. I put some fonts back into the user folder (never touched the fonts in the system library) and resolved SOME of the "A" issues, but not all. I have no problem in Chrome or Firefox. I've tried multiple solutions in the past couple days, including this fix for sandboxing conflict http://reviews.cnet.com/8301-13727_7-20087102-263/webkit-sandboxing-conflict-cau ses-safari-block-a-font-problem/ but then I got permission errors when I tried to change the file. I'm not even running Lion and I'm having this issue.

Any issues with PE7 and Windows 7?

Hi All,
I am considering purchasing a second computer. I have had great success with PE7 and Vista, But I can't get Vista on the new Alienware I want to buy. So, has anyone had any issues with PE7 and Windows 7? I have read many posts where there are issues with PE8 and Windows7.
Thanks, Stan

It's a toshiba laptop.
4 gig DDR3
core duo
320 hard drive - partitioned
I also use a dual screen - 22" lcd monitor
I don't use it a lot, since I have a desktop. I've noticed having a
dedicated video card makes a world of difference in editing. This might be
your problem; a dedicated high end video card is the way to go.
If I do simple compilations I don't have any problems. I usaully am making
a DVD of soccer games. If there is a lot of special effects I'll use my
desktop that has XP.

Font issues with ATM and new O/S install

Similar Messages

Maybe you are looking for