Forcing Save when changing Tab Pages
Hi,
I have a form with four different tab pages
and a common "Save" button (that performs
the Form commit).
The problem is that I would like to force
the user to commit any changes they have
made in one tab pages before allowing them
to change tabs.
Sort of a PRE-TAB-CHANGE trigger.
Any ideas on how to solve this ?
Thanks in advance.
Regards,
Klas Malmstrom
Hi
You may use trigger When-Tab-Page-Changed, asking for commit and if user answers 'NO' return him to previous Tab.
Andrew.
Similar Messages
-
In the web client, How do you go about changing tab page names. For instance, the tab page default on complaints transaction has a heading called technical analysis. I want to change it to just analysis. I looked in the tab groups I see the event with the tab name, however, it can't be modified there? can someone enlighten me on where this modification can be made?
Amory, in order to change the actual name of the tab (read: event), every tab is associated with an event, lookup Tab Group, CPL_ODC1, here you see a View Swith Group assigned 'S10_HD_ANA'. When you lookup this View Swith Group, you see the description 'Technical Analysis'. Copy both this entry and replace it's description accordingly. Then copy the tab group and refer to the newly created View Switch Group. After this create an entry in the BAB tables for your application for the event S10_HD_TREE_ANALYSIS and refer also to you newly created tab group. Hope this helpes, Tiest.
-
OH-Edit Medical Service: How to change tab pages text
Hi All,
Is it posible to change TAB pages text in Edit Medical Serivce(EHSAMBTAET) like Protoco/GeneralExamination, Vaccination etc to some other text?
Thanks
BhuwanHI Dhaval,
Can you be more clear. At what point of time you want to change.
Thanks
Aravind -
Clear form when changing tab or page
I do have a few pages which hold information separated into many tabs. Within the tabs are porlets consisting of one form portlet and a report portlet. I used the query button in on form and change the tab or page and did changes on the other tab/page. If I go back to the original tab/page the form stays in the query state holding the values of the last query. This is dangerous because I could have changed the data of the table behind the form on another page. Therefore I want to reset the form every time I leave the the tab/page where the form is. Has everyone tried this and succeeded?
Thanks for you help.
AlexandraI don't know exacly why this does not work for your system as
well. I can just guess. There is another configuration for
caching in the main configuration of PORTAL I think it is the
file http.conf under Oracle\iSuites\Apache\Apache\conf. My system
admin told me that he had totally disabled the caching option for
PORTAL. This is how my http.conf file looks like at the lines
that have to do with caching:
# CacheNegotiatedDocs: By default, Apache sends "Pragma:
no-cache" with each
# document that was negotiated on the basis of content. This asks
proxy
# servers not to cache the document. Uncommenting the following
line disables
# this behavior, and proxies will be allowed to cache the
documents.
#CacheNegotiatedDocs
# To enable the cache as well, edit and uncomment the following
lines:
# (no cacheing without CacheRoot)
#CacheRoot "D:\ORACLE\iSuites\Apache\Apache\proxy"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First either `none'
# or `dbm:/path/to/file' for the mechanism to use and
# second the expiring timeout (in seconds).
#SSLSessionCache none
#SSLSessionCache shm:logs\ssl_scache(512000)
SSLSessionCache dbm:logs\ssl_scache
SSLSessionCacheTimeout 300
Don't know if this helps. But it works for 3.0.8.9 -
hi all,
I have to change the "page" property in "Tab target" on runtime in my application. For example if i have 7 page number set on my "Home" tab, can i change it to page no 11 on the fly in a PL-SQL process???
With Regards,
Sunil Bhatiahi fac,
i like this solution for my problem bt dont know how to implement it from the link which you sent
The parent tab target must be a page the user is authorized to see. (We use the term "page" and not "screen", which sounds so '80s/VT-100 or worse.) You >might be able to use a substitution item as the page ID portion of the parent tab target (f?p=&APP_ID.:&TAB_TARGET_ITEM.:&SESSION), setting this item's >value right after authentication when you can determine whether the current user is an admin or not. In any case, the admin authorization scheme should be >attached to all standard tabs associated with admin-only pages in addition to being attached to the pages themselves and to any admin-only parent tabs.
You may have been experiencing the result of cached authorization scheme checks in your trials. To get around this, set the authorization scheme to be evaluated >for every page view until you get things sorted out.
ScottCan you tell me how can i set new url after my custom authentication scheme???
Thanks a lot
Sunil Bhatia -
Hi all,
We're working with Developer 6.0, and we have a problem with the
applet
viewer, it's this:
When we try to go to an item of the same data block, but
distinct
tab page, the go_item function doesn't works,
how can we do to go to the destination item.
Thanks for your help.
nullhere is how you restore or change your new tab. Thanks to jscher2000 in another post.
Quoting
"Here is how you can reset what the tab does. If this setting does not stick, one of your add-ons might be overriding it.
(1) In a new tab, type or paste about:config in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste newtab and pause while the list is filtered
(3) Double-click the browser.newtab.url preference and enter the desired value:
(i) Page thumbnails (default)
about:newtab
(ii) Blank tab
about:blank
(iii) Built-in Firefox home page
about:home
(iv) Any other page
full URL to the page
Press Ctrl+t to open a new tab and verify that it worked."
I hope this helped you it sure helped me and Thanks jscher2000, you saved me from pulling my hair out. -
Programmatically change tab page label font size
Hellow Fellow LabVIEW Lovers,
I thought this subject was easy with LV2009, somehow I cannot find the property for the "tab page label font size", yes, i also looked with the "pages" ref array from the tab ref, also no luck. Could someone point me to the right place? I would really appreciate your help. Thanks.
BryanOdd,
The each tab is a page Class Generic>Page.
This snippet shows that there are no objects on the page (like the lable)
However ,Page Propertise do not include lable.font.all elements
Page Properties
Dim hasPlayer, playerversion
hasPlayer = false
playerversion = 10
Do While playerversion > 0
On Error Resume Next
hasPlayer = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & playerversion)))
If hasPlayer = true Then Exit Do
playerversion = playerversion - 1
Loop
is_FlashVersion = playerversion
is_Flash = hasPlayer
Requires: Base Package
Inherits from Generic. View the class hierarchy.
Property
Description
Colors
Gets or sets the foreground and background colors of a tab
control page. Details
Colors:BG Color
Gets or sets the background color of the tab control page. Details
Colors:FG Color
Gets or sets the foreground color of the tab control page. Details
Controls on Page[]
Returns an array of references to the controls and indicators
on a page. The order in which you place the objects on the page determines the
index of the object in the array. For example, if the first object you place on
the page is a numeric control, the index of the numeric control in the array
returned by this property is 0. Details
Decorations on Page[]
Gets an array of references to all decorations on a tab
control page. Details
Description
Gets or sets the description of a tab control page. Details
Independent Label
Makes the tab control page caption independent of the page
label. Details
Objects on Page[]
Gets an array of references to all controls, indicators, and
decorations on a page. Details
Page Enabled State
Gets or sets the state of a tab control page to enabled,
disabled, or disabled and grayed. Details
Page Label
Gets the label of a tab control page. Details
Page Visible
Shows or hides individual pages of a tab control. Details
Tab Caption
Gets or sets the text of a caption on a tab control page. Details
Tip Strip
Gets or sets the tip strip of a tab control page. Details
Moreover, I can select a tab lable on the FP, change its font and EACH tab lable changes to the SAME font and color.
Must be some serious MAGIC in the background similar to how NI made Latching Bools.
Champions?
Jeff -
Regarding dynamically changing tab pages
hi friends,
i have a doubt this is regarding Manipulating tab canvases.The problem
which is occuring is that when ever i m trying to click on top most tab page for instance ,if u have seen Toad.exe(A Part of Quest Software) u can view them in a fashion , that if u click on tables tab it gets populated before and the rest of them gets behind it i m trying a similar kind of thing , but i m getting stucked up if any positive query or
solns . available please let me know at the soonest..
Regards
shrikant
nullI work in Forms 6i with a tab canvas with more than 10 tab pages, one of them with picture of employee. No complaints so far, even the same form is populated on the Intranet.
-
Muse crashing when changing multiple page titles
I have a rather large site (about 80 pages) and went in to change the page titles across the site to help improve seo. After changing about three page titles Muse would crash. I began saving the site after each change and that was a bit better, but it still crashed about every 8-10 pages. I am finished with the project, but I wanted you to know what was happening. I am running version 2014.0.1.30
Please try to enable same as page title and then try to change name from plan layout.
If you still get same error, try to remove master page from that specific page and then enable same as page title and make changes.
Thanks,
Sanjit -
A recent update is causing the browser to switch between tabs, or even go on to other pages, when I use the keyboard navigation arrows to scroll down the page. This is aggravating, especially when filling out a form, which can submit before completion. The tab switching occurs mostly when the focus is not in a specific portion of the web page, such as when I have selected a tab. I I can find no way to disable this behavior.
Win 7 Ultimate fully patched, Firefox version 35.0.1Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Random artifacts appear when changing tabs
For some time, I've been getting occasional (though seemingly more and more frequent) weird artifacts on my browser when going to another tab. As you can see (outlined with red circles for visibility), the address bar changes to the other tab but the contents don't and when i move my cursor on the screen, the elements from the correct tab do load when touched by the cursor but the site doesn't show as it should until I select yet another tab and then the correct one again. Here are the screenshots:
http://i.imgur.com/dJ3J9XL.png
http://i.imgur.com/NsqT8Le.png
My setup is Firefox 33.1 (though it happened for long enough that I think the previous versions were also affected), Windows 7 x64 Professional. I have hardware acceleration turned off, I also tried browsing in safe mode (with all add-ons turned off) but the same thing happens. What may be the problem?Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Try to disable OMTC and leave hardware acceleration in Firefox enabled.
*<b>about:config</b> page: layers.offmainthreadcomposition.enabled = false
*http://kb.mozillazine.org/about:config -
Facebook turns black when changing tabs... How can I fix this?
Whenever I'm on safari and I open my facebook it works just fine. But when I go to another tab and return to my facebook tab the page is all of parts of ik are black and I have to refresh the page for facebook to look normal. This has been going on quite a while and it never really bothered me, but now it's just getting annoying! Does anybody have a solution or know what to do? Thanks in advance!
I have the same problem but if you go back to another tab and quickly back to facebook it'll go back to normal. I know it doesn't solve anything but its an alternative to refreshing the page... probably just as annoying though
-
Forced Save process in activate page
Hi,
It's possible to forced to save (make dosave or dosavenow) in activate page with peoplecode only ? (i would like to save directly if %mode = A )
peopletools 8.5
Thanks in advanceHi,
You have to do this on a fieldchange of fieldedit. Not on the page activate.
Regards,
Wijnand -
Clear data bag, when change tab in top level navigation!?
Hi, i had search the forum, but i don't find an answer!
I have the following problem:
We have to clear the client data bag (EPCM), when the user change the tab,
but how can i do something, when the user change? Is there a event and i only must subscript on this event, or what can i do?
I would be lucky with some ideas or a solution!
LarsHi Lars,
IF u are using HTMLB tabstrip then there is event for tabitem change.
For instance :
<hbj:tabStrip
id="myTabStrip1"
bodyHeight="100"
width="200"
horizontalAlignment="CENTER"
verticalAlignment="TOP"
selection="3"
tooltip="Tooltip for myTabStrip1"
>
<hbj:tabStripItem
id="myTabStripItem1"
index="1"
height="80"
width="160"
onSelect="myTabStripItem1OnSelect"
title="Tab 1"
tooltip="My Tooltip for Tab 1"
>
<hbj:tabStripItemBody>
<hbj:textView
text="TextView on Tab 1"
/>
</hbj:tabStripItemBody>
</hbj:tabStripItem>
<hbj:tabStripItem
id="myTabStripItem2"
index="2"
height="80"
width="160"
onSelect="myTabStripItem2OnSelect"
title="Tab 2"
tooltip="My Tooltip for Tab 2"
>
<hbj:tabStripItemBody>
<hbj:textView
text="TextView on Tab 2"
/>
</hbj:tabStripItemBody>
</hbj:tabStripItem>
So for the change in selection u can define an event and write your logic in this event handler in ur controller.
check all the controls of tabstrip in below pdf
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8a41cee4-0601-0010-5fb3-d8e704f88817">EP pdf</a>
Thanks
Swathi
Do offer pts:-) -
URL region error when changing tabs
G'day all,
I've created a page in my app to have a url region in it but every time I access that page then go to another I get the dreaded /pls/otn/wwv_flow.accept was not found error.
I've now tried in 3 environments:
1. Oracle HTMLDB site - app 2780 page 5
2. DB 9.2.0.4 Win2K HTMLDB 1.6.1
3. DB 10g Linux RedHat EL 3.0 HTMLDB 1.6
and get the same result on all of them.
The URL I'm currently trying is very basic (http://www.google.com.au)
Any ideas ???
GregGreg,
URL regions work ok for pulling content from another site onto your HTML DB page. They don't work as well for situating that site's page within the FORM that is an integral part of each HTML DB page and having the "pulled" page operate as it would in an independent request. First, there are HTML issues that are not immediately solved having to do with relative vs. absolute URLs on the pulled page, where that page gets its images and script, the base HREF, etc. Second, there are limitations on the type of response returned by that page request: anything other than HTML will trip up the underlying use of utl_http.request. Third, forms that operate correctly in the foreign page when requested natively may not (often won't) work when embedded within the HTML DB standard page form.
Scott
Maybe you are looking for
-
Image in excel sheet using macro in deski
When I save deski report as excel then I don't get logo and Images in excel format. Can anyone help me on this. Thanks, Santosh
-
Can I import a tablespace into Oracle 10g Express Edition
I am very new to Oracle 10g Express Edition. We have a server running Oracle Enterprise Edition and we have been creating a transportable tablespace to be imported into a few servers. This works fine for us. I would like to find out if I can import t
-
Finder discrepancy between installs?
I just recently installed 10.5 on three macs. When you open the Macintosh HD on one of the machines, it lists the bin, cores, etc, private, sbin, tmp, usr, var, and volumes directories along with the typical Applications, Library, System, and Users d
-
How do I deactivate from old computer to put the software on my new one.
My computer died, but my hard drive still works. I have taken my hard drive out and have it hooked up to my new computer. I know I have to deactivate my CS6 Suite on my old computer, but it will not let me launch the program to do this. Any advice? T
-
I want to deploy JSP's in weblogic server 6.1. For that,I have done the following steps. 1.I copied the JSP file under the web application root. 2.I included the same JSP file in the web.xml file like this. <servlet>