Form level trigger size limit

hi all,
i am using Forms 6i.
in a form level trigger, there is a code of around 2600 lines.
while compiling the form it is showing an error 'Program too large'.
is there any limitation on size?
please suggest something.
Regards
PantherHawk

Hi,
I think you are getting PLS error from the database.
Yes there are limitations.
Refer :
http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14261/limits.htm
ORA-06540 ORA-06553 PLS-00123
and
Check Note: 62603.1.
Nilaksha.

Similar Messages

Block level trigger vs form level trigger

Hello.
I want to know what is better - to use block or form trigger?
I have many blocks in my form. I need to write custom code in (for example) key-crerec trigger.
Should i put trigger into each block or should i create one at form level like:
if :system.current_block = 'BLOCK1' then
create_record;
elsif...
end if;
Thanks.
Message was edited by:
DejanH

Hello,
If you have to handle this stuff in more than one block, it seems more generic to put the code in a form-level trigger if you don't want to duplicate it several times.
Francois

Form level Trigger Vs Block Level trigger

I have a form with single Database Block. I need to write a
transaction Trigger for this Block. I need to know r there any
advantages of writing the triggers at Form Level rather than at
Block Level.
Thanx in advance
--- Moneesh Walia
null

Hello,
If you have to handle this stuff in more than one block, it seems more generic to put the code in a form-level trigger if you don't want to duplicate it several times.
Francois

Form level trigger

Hi all,
I need trigger function, their execution preference at form level. and when we execute query and go to next record
which trigger fires at this stage at form level.
Regards
Rizwan Ali

If you are running your form from the Forms Builder, try turning the Debug Messages on. This will show an alert for each trigger that fires. This will let you see what triggers fire throughout your form. This is very helpful in learning the firing sequence of triggers in forms.
To turn this feature on go to the Edit Menu -> Preferences -> Runtime tab -> Debug Messages checkbox. While this is a handy feature - just don't forget to turn it off when you are finished as it can be quite annoying when you don't want it turned on. ;)
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Unable to associate function key f12 with form level trigger(form6i)

i have one issue in form6i.
i made association f12 key with key-cquery trigger in oracle terminal by opening FMRUSW.RES.
i am getting error message " function not perform here " when i pressed f12 key.
what is the problem?
what to do?
please reply as early as possible.

count-query only works on datablocks which are assigned to a datasource. As long as the count-query does not work using the menu it will also not work using keys. The fact that you get the same errormessage using menue or key indicates that the key-mapping seems to be ok.

Why Module level trigger contains "WHEN-CHECKBOX-CHANGED" trigger in Forms 6i?

Hi,
Why Module level trigger contains triggers like "WHEN-CHECKBOX-CHANGED", "WHEN-BUTTON-PRESSED" etc.? "WHEN-CHECKBOX-CHANGED" trigger is present in CheckBox & "WHEN-BUTTON-PRESSED" trigger in Button. Then why these triggers are also presnt in Module?
Can anyone please clarify my doubt?

There's a lot of triggers that are present at different "scopes". Like they exist at the item level, the block level,
the module level...
The idea is if you have an action that should only occur at that one single item it can do in the item trigger. If
it's for all of them on the block, in the block level trigger. If for all of them ever, at the module level.
For example suppose you wanted it to do a next_item after the trigger executed you can put that logic in the module
level trigger. A key thing to notice here is the trigger hierarchy. That is essential to know about.
Right click on one of these triggers in the object navigator. The execution hierarchy is override, before and after.
since each of these levels of the same trigger has this execution hierarchy this is, well, potentially not easy to
understand what is going to happen. I would typically have a per-item trigger be before and a higher level trigger
be after.
And this execution hierarchy thing is something I'd love to see enhanced in the gui. I wish it was a lot easier to see
what the execution hierarchy is when editing a trigger text. I wish one could see and modify the execution hierarchy on the
same screen as the trigger text and what would be really great is some way to tell how the trigger hierarchy will sort out
at run time. For example if one is looking at an item level trigger it would be fabulous to know that as is, that trigger will be
overridden by a higher level trigger and so on. Or vice versa if one is looking at a block level or form level trigger that it is
overridden by a lower level trigger, or it will execute before or after some other trigger. I don't know what is defined to happen
with various levels of triggers that have the same execution hierarchy. Like suppose they are all override,before,after.. then
what happens? It'd be good to know.

Form level v/s item level trigger in oracle forms

Hello Experts,
I am new in oracle forms.I am using forms 11g with weblogic server 10.3.5 at windows 7.I am very confused between Form level and item level triggers.What is the sense of use of when-button-pressed trigger at item level & form level.If I have this trigger form level then how could I check that is fired.
Thank You
regards
aaditya

979801 wrote:
Hello Experts,
I am new in oracle forms.I am using forms 11g with weblogic server 10.3.5 at windows 7.I am very confused between Form level and item level triggers.What is the sense of use of when-button-pressed trigger at item level & form level.If I have this trigger form level then how could I check that is fired.
Thank You
regards
aaditya
You need to clear you concept first..
Form level Trigger: code applied all respective item within the form
Item level Trigger: code applies for only the item that has the code.
try in a form and you will see the difference.
Hamid

How can we disable Block Level Trigge using Form Personalization

Hi,
I want to disable block level trigger(WHEN-NEW-RECORD-INSTANCE) using forms personalization at responsibility level.
Can any one please give me the answer.
it's urgent
Thanks and Regards,
Dhana

No, Firefox is user choice rules over the "wants" of individual websites as far as disabling contextual menus and the keyboard commands.
Placing a transparent image over the image will keep the less technical user from saving the main image. If they do try to save it all they'll get is the transparent image overlay.

Force Form to Execute builtin trigger at form level

Hi,
I have form 10g R2 I put PRE-UPDATE trigger at block level and Form level but I when I update a record it executes only block level update trigger, I want to execute both builtin at block as well as form level, is there a way.
Thanks and Regards, Khawar.
Message was edited by:
S. Khawar

I created a test form (Oracle Forms 10g r1) that hits the EMP table in the SCOTT schema. In the form, I added a Pre-Update trigger at the Form and Block level. With the "Execution Hierarchy" (EH) left at the default Override, saving my form caused only the Block Pre-Update trigger to fire. Changing the Block EH to Before and the Form EH to After caused the Block Pre-Update to fire first followed by the Form Pre-Update. I then changed the Form EH to Before and the Block EH to After and tried it again. This time, the Save caused the Form Pre-Update to fire first and the Block Pre-Update to fire second. Therefore, S.Khawar, depending on which Pre-Update trigger you want to fire first, I suggest you set the Execution Hierarchy accordingly.
That was an fun little exercise. I've had this discussion with people before, but never took the time to throw together a test case to confirm what really happens in a Form. Steve - thanks for raising the question! :-)
Craig...

Maximum Trigger Size code / compiled

Hi,
The limit of trigger size 32k,is this code size or compiled
thank & regards
Pradeep

I did see "PLS-00123 program too large" only once in my life and it was for a hudge package, not a trigger ...
Anyway, I tried it...
create or replace trigger tr7 after insert on emp
begin
insert into t7 values ('xxxxxxxxxxxxxxxxxxxxxxxxxxxx...
insert into t7 values ....
insert into t7 values ....
end;
With 800K source-code, 400 inserts, it compiles successfully.
With 1.5Mb source code, 800 inserts, I am getting an error, but not related to the compiled size.
create or replace trigger tr7 after insert on emp
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01653: unable to extend table SYS.SOURCE$ by 64 in tablespace SYSTEM
As John
said, the size is dependents on things that you do.

Maxl Error during data load - file size limit?

Does anyone know if there is a file size limit while importingdata into an ASO cube via Maxl. I have tried to execute: Import Database TST_ASO.J_ASO_DB datausing server test data file '/XX/xXX/XXX.txt'using server rules_file '/XXX/XXX/XXX.rul'to load_buffer with buffer_id 1on error write to '/XXX.log'; It errors out after about 10 minutes and gives "unexpectedEssbase error 1130610' The file is about 1.5 gigs of data. The filelocation is right. I have tried the same code with a smaller fileand it works. Do I need to increase my cache or anything? I alsogot "DATAERRORLIMIT' reached and I can not find the log filefor this...? Thanks!

Have you looked in the data error log to see what kind of errors you are getting. The odds are high that you are trying to load data into calculated memebers (or upper level memebers) resulting in errors. It is most likely the former. you specify the error file with the on error write to '/XXX.log'; statement. Have you looked for this file to find why you are getting errors? Do yourself a favor, load the smaller file and look for the error file to see what kind of an error you are getting. It is possible that you error file is larger than your load file, since multiple errors on a single load item may result in a restatement of the entire load line for each error. This is a starting point for your exploration into the problem. DATAERRORLIMIT is set at the config file, default at 1000, max at 65000. NOMSGLOGGINGONDATAERRORLIMIT if set to true, just stops logging and continues the load when the data error limit is reached. I'd advise using this only in atest environement since it doesn't solve the initial problem of data errors. Probably what you'll have to do is ignore some of the columns in the data load that load into calculated fields. If you have some upper level memebers, you could put them in skip loading condition. let us know what works for you.

Can't see v$session in forms 10g trigger?

Forms 9.0.4 against 10g database.
I'm playing around with finding out who has a row locked so I can trap that annoying "could not reserve record" message that just generates calls to me from confused users.
Anyway in the process of trying different things, I find that when I try to select from v$locked_object or v$session, in either a block level trigger, a program unit or even a library at compile time it fails with "identifier v$locked_object must be declared". It seems forms cannot see the view. I can select from this view just fine via SQL/Plus or Toad with the same ID.
What gives!? I mean, if I have rights to select from the view why can't I get to it from forms?
Gary

http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:4515126525609
Are you sure you know who locked the record? I created a table and inserted some records. 2 were marked for deletion by 2 separate users and a third user also tried to delete one of those records. Then I ran the first query in the metalink article and couldn't differentiate between the 3 records except for username. The other columns in v$locked_record don't help either.
On heavily used tables you're unlikely to be able to pick out a particular blocking session so you'll have to resort to telling the users that 'someone' is locking their record. So you'll still get the phone calls. The voodoo doll won't actually help but it might make you feel better about it. A healthy cynicism does the trick just as well.
As for why forms won't compile, I can't help. I assume you are using the same logon credentials?

WebUtil doesn't work when called from WHEN-NEW-FORM-INSTANCE trigger

I need WEBUTIL_CLIENTINFO functions to know some information from the client, like IP, JavaVersion, Hostname, OS user, etc. This functions I call through WHEN-NEW-FORM-INSTANCE TRIGGER and this doesn't nor work. I obtain the next message and error:
oracle/forms/webutil/clientinfo/GetClientInfo.class not found. WEBUTIL_CLIENTINFO.GET_IP_ADDRESS.
But when I call this WebUtil functions through WHEN-WINDOW-ACTIVATED trigger or through a button it works. Why?. I need call WebUtils in the WHEN-NEW-FORM-INSTANCE trigger!
Any help will be of great value.

Basically make a timer...
Do you have the wu_test_106.fmb file that comes with the webutil install?
If you look in the wnfi trigger you will see this...
declare
     fake_timer TIMER;
begin
     -- Purpose of the fake timer is the we cannot call webutil in this trigger since the
     -- beans have not yet been instantiated. If we put the code in a when-timer-expired-trigger
     -- it means that this timer will not start running until Forms has focus (and so the webutil
     -- beans will be instantiated and so call canbe made.
     fake_timer:= CREATE_TIMER('webutil',100,NO_REPEAT);
     --create_blob_table;
     null;
end;And in the form level when-timer-expired you will see this...
     :global.user_home := webutil_clientinfo.get_system_property('user.home');
     :OLE.FILENAME := :global.user_home||'\temp.doc';
     SET_ITEM_PROPERTY('builtins.text_io_item',PROMPT_TEXT,'Write to '||:global.user_home||'\helloworld.txt');
     SET_ITEM_PROPERTY('files.userdothome',PROMPT_TEXT,:global.user_home);

Is there a size limit of the mp4 transfer to Ipod?

Hi, i have converted a video and the size is 640x480. It worked just fine for itune and quicktime player, but when i start to transfer it to my ipod video. It declines my mp4 video and said it's different format. Again i did the same thing and converted the same video to size 320x240. This time the ipod accepted it. So i wanted to know is there a size limit to the ipod??

The maximum resolution for an MPEG-4 file is 480x480.
The maximum resolution for an H.264 file is 320x240.
From the iPod Tech Specs:
H.264 video: up to 768 Kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
MPEG-4 video: up to 2.5 mbps, 480 x 480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats

Where can I Increase the size limit for attachments

Good Morning:
I am working in OCS R2 (9.0.4). Where can I Increase the size limit for attachments in the messages sent. Also can I set this parameters to user level or the change affect every user in the system?
Thanks a lot.

babowa wrote:
The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
It's a b*&^ch getting old . I still use the screen zoom instead of decreasing resolution, but maybe soon ...

Form level trigger size limit

Similar Messages

Maybe you are looking for