Frame skipping from the Multiple Actions window (Cp4)
Can anyone remind me how to trigger this:
rdcmndGotoFrameAndResume := rdinfoCurrentFrame -10
but from the Multiple Actions window on Cp4?
I want to show a colleague how to set up a slide with multiple images that the learner can click as many times as they like to show relevant captions (and hide previously shown ones). Obviously the big problem is stopping the project from continuing until the learner clicks a separate Continue button.
Normally I'd use Advanced Actions and add the code above in addition to the show/hide stuff, but this time I want to keep things as simple as possible using Multiple Actions as it's far more intuitive - but it won't let me do this kind of assignment.
Any suggestions? One of the options is to execute javascript but I'm not sure what the javascript equivalent of this is, or even how it should get wrapped up in that window.
Thanks
As far as I can remember, you cannot create an 'expression' like this in Multiple actions, you only have the Assign action but the system variables that you can access with Assign are limited.
Moreover I want to warn you: Multiple actions were abandoned in Captivate 5 and later because they do not always function well. So be very careful using them.
If you want to show this, you'll need to use advanced actions, that have the possibility to access all variables and to create expressions.
Why do you rewind the playbar 10 frames?
Lilybiri
Similar Messages
-
ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
MESSAGE, READS a network error occured while attempting to read from the file C:WINDOWS\installer\iTunes.msiAll sorted now just needed to repair itunes from control panel
-
When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?
In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform. -
while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to install itunes. Can anybody help me to resolve this issue?
You can try disabling the computer's antivirus and firewall during the download the iTunes installation
Also try posting in the iTunes forum since it is not an iPod touch problem. -
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
iTunes has tried to update itself and runs into an error and tells me to manually install. When I d/l and run the iTunesSetup.exe file I always encounter the following error message...
"A network error occured while attempting to read from the file C;|Windows|Installer|iTunes.msi" and iTunes does not update to iTunes 10.4.1.
Anyone know what is creating this error message? Thanks for the help...(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Cannot view a requisition order from the Requisition summary window.
When i query a requsition order from the requsition summary window without entering the operating unit but just the requisition order no, it shows the following error: APP-FND-01016: Routine FDFRKS: Unknown structure ID 0 for flexfield code GL# with application ID 101.. Can someone offer a solution..?
Thanks,
Kingshuk.993881 wrote:
R12.1.3I tried internally in my R12.1.3 Instance..with the same search..I don't see any errors...without OU
You may want to log a SR with oracle..
Are you upto date with latest oracle procurement patches??
Mahendra -
Can't find a way to delete Templates from the "My Templates" window in Pages.
How can I delete Templates from the "My Templates" window in Pages?
If you want to delete user-made templates, go to ~/Library/Application Support/iWork/Pages/Templates and you'll find the individual files that you can just delete.
If you want to delete iWork's own templates, that's a bit trickier. Right-click (or Control-Click) on the Pages application, choose Show Contents. Drill down to Resources and Templates and there they are. I'm not sure I'd delete anything from the application package, however, so my advice would be to copy the app and try it on that to make sure it doesn't foul anything else up.
Good luck. -
How do i add and delete photos from the screensaver preference window
How do i add and delete photos from the screensaver preference window?
Hello, sassy4sue.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when creating or editing iPhoto albums that you are using as a screen saver.
Mac Basics: Using Screen Saver when your screen is idle
http://support.apple.com/kb/ht2485
Cheers,
Jason H. -
ARD: destination items from the "copy items" window
How can I delete or modify the list of last used destinations from the "copy items" window?
Thanks in advance,
MikeHi,
This issue may occur if there is a corruption of either the rule or within the mailbox.
Please first try to reset the send/receive settings to check the result. Resetting the send/receive settings can be achieved by renaming the srs-file of your profile to .old. You can find the srs-file for your mail profile in:
C:\Users\%username%\AppData\Roaming\Microsoft\Outlook
If above doesn't fix the issue, please go to File > Manage Rule & Alerts, delete the rule and then run a repair of your Outlook data file. Then, recreate the rule to check the result. For detailed steps, please refer:
http://www.msoutlook.info/question/133
Please let me know the result.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Desired behavior: I used to be able to delete cookies from the "show cookies" window and they would automatically show up in the exceptions list and be blocked in future sessions.
Undesired behavior: Now, on a new install, I can delete the cookies from the "show cookies" window but they do not show up in the exceptions list.
??????? Help?See:
*http://kb.mozillazine.org/network.cookie.blockFutureCookies -
Single Frame Exports From the Viewer Window
Why, when i choose to 'open in viewer' from the timeline, does it only export a static frame, or sometimes single frame, when i choose to export using quicktime conversion?
Alternatively, i have to make an in and out point on the timeline, and export that way. But this is clumsy, because i often want to send out a piece of video, where on the timeline, there are often 2 or 3 video tracks over that one, so i have to delete, or make opaque these track.
Also, opening in viewer and exporting automatically makes the correct clip name. Which is very handy.Not sure. But a simple workaround for the scenario you mention is to just copy the clips from the track you want, to end of the timeline or another sequence and export from there.
rh -
How do I output the smoothest video when changing or mixing frame rates from the original footage?
I have been experimenting with various Media Encoder settings, and wondered if there was anything else I can try to get the smoothest video output possible, especially when changing frame rate and possibly resolution. For clarification, let me start from the beginning and explain what I'm doing and what I've tried so far. I'll try to be as brief as possible, but if I do go into too much detail, I apologize.
My original footage is AVCHD 1080p - 60fps. (my camera only does 60fps...specifically 59.94fps) We're not talking interlaced video here, I'm staying away from that. This is definitely full frame, progressive video at 60 frames (not fields) per second. My output will ultimately be for the web. I have been keeping my output codec (H.264) and bit-rate (VBR 2-pass, relatively high-bitrate) consistent, and have been trying numerous output options and even sequence settings to see what would yield the best results. I am using Premiere Pro CS5.5 along with Media Encoder. Here's what I've done and the results I've observed:
1. I created a sequence with 1080p - 59.94fps settings to match my original footage. I then output both 1080p and 720p versions at 59.94fps, and at 29.97fps. The 59.94fps output files looked absolutely great, as would be expected. Extremely smooth. The 29.97fps output files were generally smooth, but not near as smooth as the 59.94fps. This is expected since it's half the frame rate as my original footage. However, my question is this: What exactly is Media Encoder doing when "down converting" from 60p to 30p? From a technical stand point, is it dropping every other frame? I'm just curious to understand exactly what it does. I tried the Frame Blending option as well, and that only yielded a bit more blur to the images which wasn't desirable for any of the output files.
2. Just to see what would happen, I created a sequence with 1080p - 29.97 settings. I then output both 1080p and 720p versions at 29.97fps. The video was much more choppy in these cases, even with Frame Blending on. Now, I know not matching my sequence settings with my original media isn't ideal, but I again just want to understand why this yields less smooth video than the 29.97fps options above. Why does cutting the sequence settings frame rate in half from the original, then outputting the same frame rate as the sequence yield video that is not as smooth?
3. Next, I wanted to try mixing frame rates to see how Premiere and Media Encoder handled the footage and output files. Premiere handled it great, no issues there. However, I had some interesting things happen when I output the files. Here's what I did: I created a sequence with 1080p - 59.94fps to match my original footage. Then I took the same exact footage that was in my sequence, copied it in my project panel and interpreted it at both 23.976 and 29.97 fps, yielding slow motion video. The slow motion video looked great in Premiere, so I went ahead and just added it to my sequences, along with the original 59.94 footage. I also created separate sequences for the 29.97 and 23.976 footage respectively, each with matching sequence settings, then added a nested sequence to another original footage sequence (with 59.94fps sequence settings) to see which yielded the best results. Basically, I'm trying to output 59.94fps that match my original footage, but also throw in some slow motion footage at different framerates. I'll explain my results in a moment as they are a bit convoluted, however, here is my question: When mixing frame rates and trying to output the smoothest video, am I going about this the right way? I would assume you would use your sequence settings that match the original footage (which is what the majority of the footage will be), then bring in a nested sequence for the slow motion (as oppose to just dropping the slow motion video directly into my main sequence), and then output to the same frame rate of the majority of the footage, in this case 59.94fps. Is there a better workflow for this?
The results to #3 above were as follows. Initially, it looked like it didn't matter if I nested the slow motion sequence into my main sequence, or simply dropped the actual slow motion video into my original 59.94fps sequence. It seemed to produce smooth results either way. Frame Blending blurred the video a bit, but didn't seem to make much difference, and quite honestly I like the footage without Frame Blending in general. However, when I closed down Premiere, and opened the output files later (opening in Quicktime), the footage looked choppy. In fact, it would go from choppy to smooth and back, almost like it had an irregular cadence (don't know if I'm using "cadence" in the right context here). I would then open up Premiere again, import the output footage into my project panel, and play the footage in Premiere, and it would play back smooth again. Is this a Quicktime issue? I was playing 1080p 59.94fps files when this happened, so maybe it's just because it's a large file. Doesn't seem to have issues with the 720p files I created. But it sure threw me off with my testing because I then started second guessing the settings I was using. My iMac is the latest 2011 model with plenty of RAM, so I wouldn't think it's the computer. Thoughts?
4. Next, I noticed on ALL my output files (again, using the H.264 codec from Media Encoder) that the color of my video seemed to flatten quite a bit. It seems that the original footage has more contrast and saturation than the output files. I figured maybe this was just how it was, but when I re-imported the output files back into Premiere, they looked IDENTICAL to the original footage. And in Media Encoder's Source/Output windows, I don't see any difference there either. Is Quicktime again the culprit here, doing some odd things to the color of my videos?
5. Regarding Frame Blending, when is the best situation to enable this option in Media Encoder? I've read it is when mixing frame rates, but I honestly didn't see too much of a change except for a bit more blur, which I didn't care for.
6. Lastly, my conclusion is that 60fps yields the smoothest video, which is an obvious conclusion. However, I know that 60fps isn't the best or easiet frame rate for web delivery. It seems 30p is more the standard. Are there any integrated web players that would play 60fps? Can you get 60fps video on YouTube/Vimeo? If yes to any of these questions, can they do 720p and 1080p at 60fps?
Those are all my questions. I hope I am clear enough without being overly wordy and hopefully I didn't put too many questions into one post. Thanks in advance for any insight, I really appreciate it.Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
thanks! -
For years I was happily plugging in my Palm Treo Pro, and having my contacts and calendar synch with my PC, WITHOUT the need for that information to be stored on the cloud, where anyone could get at it. When that died recently, I bought a used Windows 7
phone.
So far, it sucks. And it's not the phone that's the problem.
My main issue is that I have diligently exported my (over 5000) contacts from Outlook as a CSV file, and went to import them into Windows Live, only to discover that there's a 500KB limit. That's somewhere around 500 contacts.
ARE YOU SERIOUS?!? You really need me to set up 10 different files, to import stuff onto the cloud?
Please tell me there is a way around this limit, or (better yet) a way to synch directly with my PC, so I can avoid this whole Windows Live disaster?? I want to use Outlook. It's a Microsoft product!
Please help!
DebHi,
I'm not sure about the Microsoft Account Contact limit, for this issue, you may post the question to Microsoft Community:
http://answers.microsoft.com/en-us/outlook_com
If you still have the contacts in your Outlook Client, I suggest you setup the Microsoft Account(Windows Live) in Outlook via Exchange ActiveSync, then move the contacts to the contacts folder of the Microsoft Account, let it sync, then all will be done,
you don't have to export and import the .csv file any more.
How to configure Outlook to connect to an outlook.com email account
http://support.microsoft.com/kb/2735989
Regards,
Melon Chen
TechNet Community Support
Maybe you are looking for
-
How to switch from one iTunes account to another on iPad ?
Hi there, I was using an old iTunes account until it went all weird. So I created a new iTunes account and I'm wondering how to get these onto my iPod touch 4th gen and iPad 1st gen ? It comes up under the iTunes store ( at the bottom ) but when I go
-
No costs visible for statistical WBS element
Hi, The followin steps are the setup: - Project with a statistical WBS element and a network below - Create a PO with Account category "Fixed Asset" - Fill in a fixed asset, but also a (statistical) WBS element (put field 'project' optional in custom
-
I cannot find facetime on my iphone 4. i have version 4.3.3. I actually updated my phone in UAE and then facetime disappeared. facetime is banned in uae but now I am in australia i want to have facetime.. someone pls help me get it back !! thanksss
-
Every single time I exit Pages, without fail, it crashes. I don't lose my work, because I've saved when exiting, but it's annoying. Any ideas what to check or fix?
-
hi i am developing a application using swings(JFrames) i had written the code it worked fine and no warnings or exceptions while tried to execute in JDK1.4 but when i tried to execute in JDK1.5 or more it is showing following warning messages as foll