Free application for cleaning files on a mac

Can someone please tell me the name of the free i application for cleaning files on a mac that is highly rated?

So far all of the supposed "cleaning" applications I have tested are basically worthless. They either don't do half of what they claim they will do or they do dangerous things and don't even tell you they are doing them. Make suggestion is to avoid anything that claims it is going to "clean things" up for you.
I would recommend that you use OmniDiskSweeper. It will tell you the folders and files that are using the most space on you disk drive. With that knowledge you can then decide what can be deleted or moved.
Allan

Similar Messages

Best application for cleaning my files

Best application for cleaning my files?

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
The free anti-malware application ClamXav is not crap, and although it’s not routinely needed, it may be useful in some environments, such as a mixed Mac-Windows enterprise network.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most users don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable.

where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable. Thank you.

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Known Issue while running Adobe Story desktop application for the first time on Mac OS 10.8

You may encounter the following error message while running the Adobe Story desktop application for the first time on Mac OS 10.8:
For resolution, please go to:
http://helpx.adobe.com/story/kb/run-story-app-mac-os.html

The /Developer directory contains the compiler(s) and various tools and libraries.
Does your user account name really contain a single quote? If so, it looks like the quote is getting eaten by one of the build scripts, which is resulting in a file path that doesn't exist.

How can I view the contents of a free trial for adobe fireworks cs6 on mac

how can I view the contents of a free trial for adobe fireworks cs6 on mac.
My friend told me to find the application in finder then hit control and click it and then it should give you the option to click
"view package contents"
This was not the case
please help thank you

When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums

Free software for .pps files

I've been using Microsoft Office PowerPoint but lately half of files freeze.
Is there a free software for .pps files?
Thank you

There are free viewers available for .pps files.
Here is one I found--all you have to do is search for "powerpoint viewer mac os x" or some such variation:
http://www.tonicsystems.com/products/viewer/.
However, don't you think it would be a better idea to try and figure out why Powerpoint freezes on half your files?
You might want to find Microsoft Powerpoint forums over at Mactopia and ask some questions there.

I was wondring if there is any top free app for cleaning up the computer and make it run faster while booting, on startup and while surfing web. I am using a macbookpro with IOS10.8.5, under chrome,safari,firefox net environment. thanks on yourhelp

I was wondering if there is any top free app for cleaning up the computer from malware, phinishing apps, adware, and othere malicious softwares and make it run faster while booting, on startup and while surfing web. I am using a Macbook pro with IOS10.8.5, under chrome,safari,firefox net environment. thanks on your help

I was wondering if there is any top free app for cleaning up ...
There is no such thing, since the problems you are describing can have various causes. Seeking anything claiming to "clean" your Mac is asking for trouble, since all of those products are scams, whether they are "free" or not.
If you are having trouble with your Mac, describe what it is. Be as specific as possible. For general recommendations read below.
There will always be threats to your information security associated with using any Internet - connected communications tool:
You can mitigate those threats by following commonsense practices
Delegating that responsibility to software is an ineffective defense
Assuming that any product will protect you from those threats is a hazardous attitude that is likely to result in neglecting point #1 above.
OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "clean up", "speed up", "optimize", "boost" or "accelerate" your Mac; to "wash" it, "tune" it, or to make it "shiny". Those claims are absurd.Such products are very aggressively marketed. They are all scams.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources.
Illegally obtained software is almost certain to contain malware.
"Questionable sources" include but are not limited to spontaneously appearing web pages or popups, download hosting sites such as C net dot com, Softonic dot com, Soft pedia dot com, Download dot com, Mac Update dot com, or any other site whose revenue is primarily derived from junk product advertisements.
If you need to install software that isn't available from the Mac App Store, obtain it only from legitimate sources authorized by the software's developer.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iCloud, iTunes, or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose:Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Java can be disabled in System Preferences.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
The same precaution applies to Adobe Flash Player. Newly discovered Flash vulnerabilities appear almost weekly.
Beware spontaneous popups: Safari menu > Preferences > Security > check "Block popup windows".
Popup windows are useful and required for some websites, but unsolicited popups are commonly used to deceive people into installing unwanted software they would never intentionally install.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever receive a popup window indicating that your Mac is infected with some ick or that you won some prize, it is 100% fraudulent. Ignore it.
The same goes for a spontaneously appearing dialog insisting that you upgrade your video player right this instant. Such popups are frequently associated with sites that promise to deliver "free" movies or other copyrighted content that is not normally "free".
The more insistent it is that you upgrade or install something, the more likely it is to be a scam. Close the window or tab and forget it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. Most of these attempts are pathetic and are easily recognized, but that hasn't stopped prominent public figures from recently succumbing to this age-old scam.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

Can you set a second "Open with:" application for a file?

Hi all,
I was wondering if something like this exists for OS X Lion or greater: you can set a default application to open a type of file, say Safari for all .html files, but can you set a second default application for a file?
I usually open files using command + o or command + down arrow from the Finder and I've often thought how good it would be to hit an alternate keyboard shortcut to open the selected file in a secondary default application.
For example, if I'm making a web page and have the .html selected in the finder I can hit command + o (or command + down arrow) to open it in Safari and if the file isn't open in my editor and is selected in the Finder I can hit, say command + option + o (or command + option + down arrow) to open the .html file in my editor.
Does anyone know if this can be achieved in OS X Lion or greater?
Any advice is greatly appreciated.
Thanks.

Hi all,
If anyone's interested in a partial solution, I've rigged up the following.
I ended up using an Automator action coupled with Spark to capture a keyboard key combination. Spark: http://www.shadowlab.org/Software/spark
I've used Spark before with good results, and although it's from 2008 it still works on Lion.
I created an Automator action that does two things:
gets the selected Finder items
opens finder items in the text editor I'm using.
I then saved the workflow as an application so that Spark could run it.
I've set up a keyboard shortcut that Spark picks up and calls my Automator workflow. It all seems to work nicely.
So, I've created a specific "open selected file with <text editor>" keyboard shortcut that should do for the time being.

Please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???

please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???

You can create an Apple ID without a credit card by following this guide exactly: http://support.apple.com/kb/ht2534. Note that you have to start by downloading a free app, then create the ID.

How do you make console apps the default application for a file type?

I have a console movie player, mplayer, that I like a lot. I've compiled it from source on my intel core2 macbook pro and it works fine. There is no gui, but to play movie files you open up a terminal and type the command mplayer /path/to/file. I would like mplayer to play a movie file automatically when I double click on the file, but I can't seem to figure out how to do it. I tried setting it in the file info dialogue, but when I go to the path of the binary I want, it is not selected. How can I set a console app as my default application for my file type?

there is a GUI mplayer for OS X. why don't you use it instead of the command line one?
if you insist on using the command line mplayer then the only way to do this is to put a GUI wrapper on it. this can be done with automator or apple script for example. but really, why don't you just use the GUI mplayer?

Looking for Windows files on a Mac

On my Macbook Pro OS X 10.9.4 Processor 2.7 GHz Intel Core i7 Memory 16 GB 1600 MHz DDR 3 when starting a existing project I get a message about a file the program is not able to load.
So it asks me to point the location. The question is as follows: Where is the file 'C:\Program Files\Adobe\Premiers Pro 1.5\Presets\Textures\Business Title_7.tga'?
I'm using a Mac and when I search for the file it's not on my computer.
It's looking for a file in a curtain folder.
Could you give an advise what to do?

Hello A.T. Romano,
I’m using Adobe Premiere Elements 12
Version 12.1 (20140225.12.1.620828)
I get the message when opening an already made project in which I added a Title.
In the ones without a title I don’t get the message.
So it is something connected to the use of titles.
I used RedBulbs as a title.
When I click ‚Skip’ or Offline my project opens correctly and I don’t miss any media. Even the title part is OK.
I hope this describes the problem enough and hopefully you can give me some advise.
Best regards,
Rob de Ridder
Op 6 sep. 2014, om 17:30 heeft A.T. Romano <[email protected]> het volgende geschreven:
Looking for Windows files on a Mac
created by A.T. Romano in Premiere Elements - View the full discussion
AquaRidder
What version of Premiere Elements are you using on your Mac computer?
Do you ever get this
Where is the file 'C:\Program Files\Adobe\Premiers Pro 1.5\Presets\Textures\Business Title_7.tga'?
when you open a new project or do you get this message only when you go to open an existing project?
If only for existing projects, then please tell us if this existing project was created with title templates and/or Instant Movie themes.
If so please detail.
If you click "Skip" to the "Where is the file....?" message, does your project open without problem? And if so, do you see any missing media
displays in the workspace? And if so where?
We will be watching for your follow up.
Thanks.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6706396#6706396
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Mac - navigateToURL opens default application for .html files instead of browser

On Mac I have Adobe AIR version <string>3.1.0.4880</string> and I have selected TextMate for .html file as default application. With this configuration when I call navigateToURL in my app to open browser, it opens TextMate instead of default browser.
Following is the simple code to open URL:
var urlRequest:URLRequest = new URLRequest(url);
navigateToURL(urlRequest, "_blank");
Is this known issue? Any workaround for this?
Thanks,

Since you've remapped what your default response to .html files are, you can't use navigateToURL() or openWithDefaultApplication().
So it looks like you'll need to use the NativeProcess class:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/desktop/NativePro cess.html

Common URL format for sharing file paths between Mac and Windows?

Hi -
I have to integrate several Macs into a Windows environment. We need to be able to copy and paste file paths to share between all machines. Is there a common URL format that can be used between the platforms?
On Windows, I have:
\\server\share\file
On the Mac:
smb://server/share/file
Thank you for your help,
Steve

On Windows you have what is known as a "UNC".
On the Mac, you have a "URL". It starts with the protocol to use "smb" then gives the path to the item using standard conventions.
UNC is Microsoft mainly.
The only way I know for Windows to use a URL is with an application like a web browser or ftp client.
On the Mac, you can use UNCs but they must be modified as follows.
In Terminal:
smbclient \\\\servername\\sharename\\filename -U username
And enter a password if prompted.
Notice that you must double up the slashes. This is due to how UNIX shells treat the backslash.
You will connect to the share, but it will only be in Terminal.

Creating folders for data files on a Mac

On a Mac platform, I am interested in trying to programically create
folders (named by the user) for data files to be placed in. How can
this be done? Currently, if I send a path that includes new folders
that don't exist to the Write to Spreadsheet.vi, I get an error 7 (new
files don't exist). However if I manually create the folders before
executing the VI, the files are written correctly. How can I avoid this
last step. Any help would be greatly appreciated and I thank you in
advance.
Jon Caldwell
Biomedical Engineering, CSUS
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

Figured it out...disregard message.
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

Free equalizer for drm files as in Spotify.

Who knows a free (or not) equalizer for drm-files as in Spotify?

anyone? A free (or not) equalizer that works in/with Spotify?

Free application for cleaning files on a mac

Similar Messages

Maybe you are looking for