FREIGHT COST TO BE ADDED TO MATERIAL VALUE FOR PRICE CONTROL"S"

hi,
How to add the frieght cost to material cost for the materials with "S" price control While doing MIGO ?
Edited by: ARITRA MUKHERJEE on Mar 3, 2010 5:07 PM

Hi
By stating Price control Indicator S ,it means that you are valuating your inventory at a standard or Fixed price (As maintainred in the Material master ).Hence your Inventory will be valuated at the standard price no matter what additional expenses you incur
Regards
Sandeep

Similar Messages

Default values for the controlling area and language

Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant Gokhale

Hello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks.

Threshold value for price changes

hello,
We are trying to change the price for material and getting error Threshold value for price changes was exceeded
msg no is CKPRCH 032
Being Sd guy I'm not able to understand where we need to check and what changes to be done
Please guide
Regards
Vishal Jajoo

Dear friend
For that u check the following path
spro>> material management>> logistics invoice verification>>invoice block>>> stochastic block
please check here for your plant your activated, if you activated then this error will appear
regards
Pramod

I want to clear the values for the controls

Hi all,
After Adding Process, i want to clear the values for the controls in the form.
Any one help me.

If you use 2005, you can use the Formdata Event and catch the FORM_DATA_ADD event... In there you can clear the data

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set value for Dropdown control using Querystring filter wepart

Hi,
I have a dropdown in my customized list form and need to set the value for the dropdown control using query string filter web part.
I am able to set value for textbox control using Query String Filer web part.
But, since the dropdown values are not populated on form load, the value is not set for dropdown control.
How to load the values in dropdown control on form load and set a value using Query String filter webpart?
Thanks,
dhijit

Hi,
According to your post, my understanding is that you want to filter choice field using Query String Filter web part.
To filter using query string filter web part, we can set the default value for the choice field in the query string filter web part panel as below, then connect to the list.
Now it would be filter by the value you have set.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Set initial value for numerical control

Hello LV users,
I have a VI that is used to initialize some experimental equiptment. It passes on a cluster of ten or so numerical control DBL integers as parameters. Everytime I open the programe the values are reset back to zero and I have to enter the values back in. Is there any way to set default values for the controls so I do not have to change them everytime I open the program.
Thanks
Solved!
Go to Solution.

Wowden,
If you want to set default values for multiple numeric control's in your cluster in one go,
-Type in the desired default values
- Right click on your cluster, browse to 'data operations'
- Choose 'Make current values default.
Similarly, if you need to set defaults for multiple clusters or multiple controls on your front panel,
- Choose 'Edit' in the menu
- Choose "make current values default' (This sets defaults for all controls/constants etc. in one go)
RaVI

Reducing the Freight cost on material value for undelivered material

Hi Experts,
Summary : The material supplier vendor needs to be paid for full quantity of material. The freight transport is allowed an under tolearance of 0.5% on the material to be supplied. If the delivered material quantity breaches the 0.5% under tolerance then amount at 1.5 times the cost of material for the shortage is to be deducted from the transporter. A dummy GR will have to be prepared for the undelivered quantity for which we do not want the freight cost to be loaded. The details scenario is mentioned below :-
We have to make a Purchase Order with material code say ABC for procured of some material. Suppose we make a Purchase Order for 100 nos. at a Unit Price of Say Rs. 10/- for Material Code ABC on say Vendor M/s XYZ. A freight condition is maintained in the Conditions Tab and suppose the Freight is Rs. 10 per unit of the material.
While preparing the Goods Receipt through MIGO, in the Freight Tab we select say freight vendor say M/s PQR against the freight condition and post the goods receipt.
While doing Invoice Processing in MIRO, when we enter the combination of Purchase Order and Planned Delivery Cost the system will populate the vendor codes of both the supplier of material and the transporter. On selecting the transporter the freight amount will populate against which the invoice of the tranporter can be processed.
In the Vendor Master of M/s XYZ GR-Based Invoice Verification is activated.
The vendor is allowed an under tolerance of 0.5% (i.e. the vendor should deliver at least 99.50 nos. of the Purchase Order). If the vendor delivers 99.50 or more then there will be no deduction in the freight charges.
But suppose the vendor delivers only 99.4 nos. of the quantity. Then we will prepare the GRIR for 99.4 nos.only. But while processing the MIRO we need to deduct 1.5 times the value of the material from the freight amount for the shortshipped quantity, i.e.
0.1 no (99.5 u2013 99.4) X Rs. 10/- * 1.5 = Rs. 1.5 are to be deducted from the final payment from the freight amount of the transporter.
The material supplier will have to be paid in full 100 nos. of quantity and will raise an invoice for 100 nos. A dummy GRIR for the 0.6 nos. of undelivered material will have to be prepared for processing the invoice for the 100 nos. of the material supplier and a dummy issue for 0.6 nos. of undelivered material will be prepared to remove them from the system.
Hence the freight cost for this 0.6 nos. of undelivered material will also go into the cost of the material and increase the MAP by that amount. Also the goods issue Cost will also have the effect of the freight cost.
We do not want to load the freight cost for the undelivered material in the value of the material.
Can any one please suggest a solution for the same.
Thanks in advance.
AJ.

Hi
A PO Will be raised for full quantity of material say 100 nos.
The material supplier vendor needs to be paid for full quantity of material.
A freight vendor is maintained at the time of GR for material against the freight condition maintained in the Po.
The freight vendor facilitates the delivery of the material from the vendor to the purchaser for which he is given an under tolerance limit of 0.5%. Any delivery below this tolerance limit, freight amount to the effect of 1.5 times the per unit rate of material x short fall below 0.5% tolerance will be deducted from the freight amount.
A dummy grir will have to be prepared for the short delivered quantity for processing the invoice for the full quantity of the purchase order, as the vendor is going to raise the invoice for full purchase order quantity. The client does not want to load the freight cost of the undelivered quantity on the material value as it will wrongly show the MAP of the material. This shortshipped material will be issued to remove it from the system and the stock will remain for the delivered quantity only. The vendor is subject to gr based invoice verification.
Please suggest a solution.
Thanks in advance.
AJ
The freight transport is allowed an under tolearance of 0.5% on the material to be supplied. If the delivered material quantity breaches the 0.5% under tolerance then amount at 1.5 times the cost of material for the shortage is to be deducted from the transporter. A dummy GR will have to be prepared for the undelivered quantity for which we do not want the freight cost to be loaded.

Service cost to be included into Material value.

Dear Expert,
1. Purchase order has been created for "XXX" material - Value of 1000 - Quantity 10, GRN & Invoice has been booked.
Now my material valuation price is 1000 * 10 = 10000
2. Service PO has been raised to make alteration in same "XXX" material, the cost incurred has to be booked for that particular Material "XXX" only.
Two vendors are different.
Kindly advise
Regards,
Mohan

Hi,
As your initial material is XXX with amount 1000 now your doing the alteration on this if you want to keep the same material code, follow the subcontract process as said by shiva, create subcontract PO for XXX add the same materail in BOM componenet , do the complete cycle add the alteration charges in the PO then when you will make the GR agaianst subcontract PO the new valuation will be
1000 + alteration chrages for each.
regards,
zafar

ADF Faces: How do I set values for input controls in an af:table

Use case: user enters master/detail information into an input form using an af:table for the desired number of detail rows.
I have an ADF Faces input form with master level input controls, and an af:table (bound to a backing bean CoreTable) for the detail data set.
The input controls are value bound to updateable view objects built from entity objects, with the appropriate view links providing master/detail iterators.
Once the user has entered the master keys (via inputTexts, and selectOneChoices), I create a row in the detail VO, thus creating a visible blank row in the af:table.
The user then completes the key for the detail row (in the af:table) by selecting a value in a selectOneChoice (in a af:column) with autoSubmit on and a valueChangeListener that sets the VO row attribute with the new value.
The user then continues to enter into the remaining inputTexts and selectOneChoices in the af:columns until all values have been entered.
I do not have autoSubmit on for any input controls in the af:columns other than the key, for performance improvement.
The user can then use a command button (which has an action method) to create another row in the af:table.
But, (in the action method) I need to set the values for the 1st detail VO row attributes, from the input controls, before creating another row.
The input controls are bound to backing bean CoreInputText and CoreSelectOneChoice objects, and they have not set their values at this point, even though I have partialSubmit on for the "New Row" command button.
I do not value bind the input controls in the af:columns to the backing bean objects, because we need to display data for all rows entered into the af:table.
Any advice on the best way to perform this operation would be very appreciated!!!!

Thanks for the reply Steve!!
Yes, I followed the techniques in Screencast#7, and it works great in my edit page.
But I am having problems with my input form.
I actually have master/detail/detail relationship for which I am creating an input form.
I created the input form as a copy of the edit form, and am making revisions as necessary.
I created new view objects for the input form (from my three entity objects), which have the "Tuning" set to retrieve "No Rows (i.e. used only for inserting new rows)"
I added an invokeAction that binds the "CreateInsert" action on the master iterator, so when the page is first displayed, the master level controls are available for data entry (as in 13.6.2 in the Developers Guide): but the first level detail controls are not rendered, and the af:table (for the second level detail) is rendered but with no rows.
Once the user enters key values for the master (a three part key), I manually create a first level detail row by executing the "CreateInsert" action binding for the first level detail iterator.
Continuing on, the user then enters a key value for the first level detail I manually create a second level detail row using it's "CreateInsert" action binding.
Now the user has a form with all master and first level detail controls completed and one empty row in the af:table for it's first entry.
The key column in the af:table has autoSubmit on, and an value change listener. That listener uses it's getNewValue() to set the key value ("locationCode" in this case) using
setLocationCode from the ViewRowImpl. Here is that value change listener:
public void locationChanged(ValueChangeEvent event) {
if (null != event.getNewValue()) {
LocObsCreateViewRowImpl locCreateRow = (LocObsCreateViewRowImpl)appMod.findViewObject("LocObsCreateView").getCurrentRow();
if (null == locCreateRow.getLocationCode()) {
locCreateRow.setLocationCode(event.getNewValue().toString());
Now comes my problem: once they have entered the values in the remaining columns, they can use a command button to create another row in the 2nd detail iterator, thus creating another visible empty row in the af:table. But the values from the first row (other than the key column) are not assigned to the row in the collection and I can't figure out how to set values in the collection's row.
I imagine I'm missing something using bindings and the Request Processing Lifecycle, and after reading this I can see how much manual work is going on.
The users have specified the need to have all information available on one page, so I've designed it so they can insert and iterate through the first level detail collection.
They have also asked to not use the mouse; they are looking for a "heads-down-data-entry" system.
Again, I really appreciate any advice you could give.
Jeffrey

Activation Material Ledger with material working in price control "V"

Hi experts!
I have activated Material Ledger and I have a question about this..
1) Before the activation, I have for example a material with the next values in the "Accounting 1" tab:
Total stock = 7 UNI
Price Control = V
Moving price = 166 USD
Standard price = 166 USD
Total value = 1.162 USD (7 UNI*166 USD)
2) And after the Material Ledger activation, In the same material appears the next values in the "Accounting 1" tab.
Total stock = 7 UNI
Price Control = V
Standar price = 166 USD
Per.Unit price = 23,71 USD
Inventory value = 166 USD
I don´t understand if my total value before activation was 1.162 USD, when I have activated ML, the new value is 166 USD.
I dont´t understand why the value for the "Per.Unit price" is 23,71USD and not is 166 USD because this is the original value before ML activation..
I think that my inventory value must be the same before Material Ledger activation, (1.162 USD)???
Best Regards
Manuel

Hi Shaubhikg:
At first, thanks for your response.
I have founded another material wich has the next information before the material ledger activation:
In the Accounting 1 tab:
Price control: V
Moving price: 1.265,80 USD
Total stock: 5 UNI
Standard price: 553,00 USD
Total value: 6.329,00 USD
After the material Ledger production start up, the same material has the next information in USD:
Standard price: 553,00 USD
Per.unit price: 1.265,80 USD
Price control: V
Inventory value: 6.329,00 USD
In this case the total value of the stock is the same after and before to do the activation of ML. I think that this is good..
And can,t understand the example wich I saw you before.. In that case the Total value of the stock after activation Material Ledger is not the same that before activation..
The material doesn´t have any modification in his unit of measure..
Could you tell me someting about this issue??
Best regards!!
Manuel

MATERIAL LEDGER AND PRICE CONTROL V

Hi Gurus.
In a Plant I've activated material ledger and some materials have price control V. how does price control V works with material ledger? the average price is uptated at the end of the month or is updated with every receipt?
Kind Regards.

Hi Andres,
What is the price determination indicator in material master? is it 3 or 2?
Materail ledger during the Actaul Costing Run consider only the price determination indicator 3 material masters.
Generally all BOM component material masters, we should maintain price determination indicator 3 and price control S.
All other materials you can have price determination indicator 2 and price control V.
Regards,
ADI

Default values for confirmation control key

Dear forum
I am using a confirmation control key 0004 Shipping notification (standard SAP) in the Purchase order line item (created with ME21n).
When I enter the confirmation data (with transaction ME22n) in the purchase order line item (confirmations tab), I have to type in delivery date, quantity and so on manually, which is standard.
But, what if I want to copy the original delivery date and quantity from the line item in the order, and use this as default value for the line item confirmation data...is it possible somehow?
The reason why I want to do this is for the user not having to go in and update this date manually all the time, but only when the confirmed dates/quantities differ from the desired delivery date and quantities in the purchase order line item. We are not on EDI or using Inbound deliverys for Purchase orders.
Thanks
Ola

Hi,
The Confirmation is nothing but the acknowledgement.So, its usually entered manuallly by the authorised User allowing follow on documents for Purchase Order.
You can chesk once the customisation of Confiramtion control keys for automatic update indicator.
Yes, you can use User Exit and develop with the help of ABAPERS.
Hope it will help you.
Regards,
Smitha

Set default value for price unit when creating material master data

HI: Every
could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
thanks
Henry

Hi: Ihave find out a solution
Use BADI: BADI_MATERIAL_REF
SPROlogistics general enhancement supplement or change default data (industry)
And then creating a Implementation Name
Double click method: CREATE_MATERIAL
And then write code as below:
method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
c_mbew-peinh = '1000' .
endmethod.
However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
in additional, we still use MM02 to change the default value such as '100'
can anybody tell me how to do?
thanks
Henry

OWB_REMOTE_ADMIN value for remote control centre service?

We're upgrading from OWB 10.2 to 11gR2, and it's failing with a message saying that the 'owb\UnifiedRepos\remote_owb_install.sql' script needs to be run to set the OWB_REMOTE_HOME to the OWB home on the database server.
However, as with our version 10 architecture, we don't want to install OWB on the database server, we want to have the Control Centre Service running on a separate application server. OWB11 has been installed on the apps server but when we run remote_owb_install.sql and then try to run OMBSEED the same error is coming up saying to run the script again. I've tried setting the OWB_REMOTE_HOME's value implicitly and explicitly, but neither works.
Any ideas or pointers gratefully received!

to add to the above information......
since I am using my own tablespace and schema as described above .....
I created a new control center through the design center user interface.......
for the new control center ...i provided the details of the above new user ...new workspace etc....
the ran the below ORACLE provided script(show_service script).....
set serveroutput on;
set role OWB_USER;
declare
l_available number(22);
begin
l_available := owbsys.wb_rt_script_util.show_service();
if l_available <> 0
then
dbms_output.put_line('Available');
else
dbms_output.put_line('Not Available');
end if;
end;
output is 'AVAILABLE'
but when I deploy my first mapping ..... I get the below error message
Error
RPE-01012: Cannot deploy PL/SQL maps to this target schema.
The target schema must be in the same instance as the Control Center and have the OWB_USER role granted
I have only one instance of oracle database .....also I have granted the OWB_USER role to my targer schema
how do i check what the Control Center is trying

FREIGHT COST TO BE ADDED TO MATERIAL VALUE FOR PRICE CONTROL"S"

Similar Messages

Maybe you are looking for