FRM-40010 Cannot acces form in a new config

Dear,
We have several configurations on our OAS.
forms/frmservlet?config=tool
forms/frmservlet?config=status21
Now i want to create a new configuration.
forms/frmservlet?config=suppliertool
I've created a third .env file, where the forms_path is the path where the forms files are located.
I've also modified the formsweb.cfg and added the following rules.
[suppliertool]
form=startup.fmx
pageTitle=Supplier tool 1.0
envfile=suppliertool.env
lookAndFeel=generic
width=640
height=480
separateFrame=true
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegr
oup=%tracetroup% log=%log% term=qmsrf65w.res
When i try to open the new config i get the FRM-40010 error?
I have copied te startup.fmx, and did not compile the form. Is that a problem?

Hi,
While running the f60desm command gives below error
FRM-40010: Cannot read form /d01/oracle/prodappl/au/11.5.0/forms/US/PROJECT.fmxDo you have this fmx file located under the $AU_TOP/forms/US directory?
Do you get the same error with other custom forms under the same directory or just this specific form?
I have defined the following path
1) customPROD_A.env
## PROJECT custom top ##
PROJECT_TOP=/d01/oracle/prodappl/PROJECT/11.5.0
export PROJECT_TOPWhat does "Echo $PROJECT_TOP" return?
2) APPSPROD_A.env
customfile=/d01/oracle/prodappl/customPROD_A.env
if [ -f $customfile ]; then
. /d01/oracle/prodappl/customPROD_A.env
fi
. /d01/oracle/prodora/8.0.6/PROD_A.env
. /d01/oracle/prodappl/PROD_A.envHave you sourced the env file again after setting the PRODUCT_TOP? Have you bounced the application services as well?
Thanks,
Hussein

Similar Messages

Forms 6i Menu Items not Lauchning (FRM-40010: Cannot read form...)

Sorry for the newbie issue - I just haven't been able to figure this out...
I inherited maintenance of a old Oracle Forms Application, I was told it was version 5. And all the source modules were appended with "v05" like form1_v05.fmb, etc. I since discovered that when the users launch it they run against the forms 6i run time - so I guess this means it is actually a forms version 6i application.
The App has about 20 forms, 20 reports and a menu - and no project.
I copied all the source files into a working directory, then I created a project with the project builder using the "use all files in the current directory".
When I run the app ( by drilling down to this app's "logo" form - a splash screen contain our company logo, and a Menu structure it runs fine.
But just about every menu item I attempt to select ( i.e. MENU->Catagory1->OrderForm or in my case something like MENU->Inbound->Entry/Maintenance) results in no new form launching and the status bar contains the error message like "FRM-40010: Cannot read form order_v05.fmx"
In the above example the project does contain a order_v05.fmb, and it compiles fine ( in fact a project "build all" generates no errors or warnings ) - my single working directory contain all the source modules ( like fmb's, rdf's and mmb's) and compiled versions ( fmx's, mmx ) . Specificlly the order_v05.fmx is also there.
So why can't the app find the compiled form compiled in the same project and located in the same directory?
I also see several ERR files but the only thing the err files contain is a whole lot of lines saying things like " Compiling POST-FORM trigger on form... No compilation errors."
Any help getting this beast to run would be appreciated.

I may have a clue as to what is causing the issue, but don't know how to fix it.
I started poking in the menu items, and the child menu item that is supposed to do something runs some "Menu Item code" like this:
begin
hide_window('DLG_MAIN');
CALL_FORM( 'out_order_v05.fmx'
, no_hide
, do_replace
, no_query_only
, no_share_library_data );
show_window('DLG_MAIN');
end;I made a NEW root menu item, with a new child menu item and set it's "Menu Item code" like this:
begin
hide_window('DLG_MAIN');
CALL_FORM( 'C:\Data\_OraFroms\ITFS_V05\order_v05.fmx'
, no_hide
, do_replace
, no_query_only
, no_share_library_data );
show_window('DLG_MAIN');
end;And when I made this change, my new menu item launched the form, but the original one did not ( notice the only difference is my new menu item gives a fully qualified path to the file name ).
So it looks like my project is clueless as to it's own home directory - anyone know how I clue it in?

FRM-40010: Cannot read form in Linux

Hi
While running the f60desm command gives below error
FRM-40010: Cannot read form /d01/oracle/prodappl/au/11.5.0/forms/US/PROJECT.fmx
I have defined the following path
1) customPROD_A.env
## PROJECT custom top ##
PROJECT_TOP=/d01/oracle/prodappl/PROJECT/11.5.0
export PROJECT_TOP
2) APPSPROD_A.env
customfile=/d01/oracle/prodappl/customPROD_A.env
if [ -f $customfile ]; then
. /d01/oracle/prodappl/customPROD_A.env
fi
. /d01/oracle/prodora/8.0.6/PROD_A.env
. /d01/oracle/prodappl/PROD_A.env
Environment:
Oracle Applications : 11.5.10.2
RDBMS : 11.2.0.1.0
OS : OEL5
Please help to resolve the problem.
Thanks
Regards
GSM

Hi,
While running the f60desm command gives below error
FRM-40010: Cannot read form /d01/oracle/prodappl/au/11.5.0/forms/US/PROJECT.fmxDo you have this fmx file located under the $AU_TOP/forms/US directory?
Do you get the same error with other custom forms under the same directory or just this specific form?
I have defined the following path
1) customPROD_A.env
## PROJECT custom top ##
PROJECT_TOP=/d01/oracle/prodappl/PROJECT/11.5.0
export PROJECT_TOPWhat does "Echo $PROJECT_TOP" return?
2) APPSPROD_A.env
customfile=/d01/oracle/prodappl/customPROD_A.env
if [ -f $customfile ]; then
. /d01/oracle/prodappl/customPROD_A.env
fi
. /d01/oracle/prodora/8.0.6/PROD_A.env
. /d01/oracle/prodappl/PROD_A.envHave you sourced the env file again after setting the PRODUCT_TOP? Have you bounced the application services as well?
Thanks,
Hussein

FRM-40010 cannot read form

I am using Oracle Forms Builder 10g and I have created a menu, but I have a problem in calling the form from this menu. The error is FRM-40010 cannot read form. I have changed the Forms_path in default.env and I put path of my folder which contains forms and menu. If anybody knows any solution, please help.

The form name is EMPLOYEES. The code for calling the form is:
open_form('EMPLOYEES.fmx', activate, session);
The path to the directory, which contains my forms is C:\Application.
What should I put in the WorkingDirectory in the formsweb.cfg file? I have already wrote the path, but it doesn't work (workingDirectory=C:\Application). Can you be a little more concrete? Thanks.

Frm-40010 cannot read form oracle apps

Hi Friends,
I am trying to build a multi form. Form A calls Form B. Both the forms are compiled and I have placed them in the forms/US folder. Both the fmx files have been generated. Form A is accessed from Function. When I click on the function Form A opens up. On clicking a button in Form A, form B opens up. But when I clidk the button I get the error
FRM:40010 Cannot read Form.
Both the .fmx files are generated. We are on 12.1.3
Can someone give me any hints to debug this or let me know what could be the issue. I have not created any function for Form B and Form A passes alomost a dozen parameters to Form B.
Thanks in Advance

user9197772 wrote:
Hi Friends,
I am trying to build a multi form. Form A calls Form B. Both the forms are compiled and I have placed them in the forms/US folder. Both the fmx files have been generated. Form A is accessed from Function. When I click on the function Form A opens up. On clicking a button in Form A, form B opens up. But when I clidk the button I get the error
FRM:40010 Cannot read Form.
Both the .fmx files are generated. We are on 12.1.3
Can someone give me any hints to debug this or let me know what could be the issue. I have not created any function for Form B and Form A passes alomost a dozen parameters to Form B.
Thanks in AdvanceAre the forms under the correct CUSTOM_TOP/forms/<US> directories?
What is the complete error message you get? Does the error message show any path?
If you want to get more details about the error, please obtain FRD log file -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

FRM-40010 cannot read form c:\temp\test_form

Hi all,
I have a strange problem, I'm working on Forms 4.5, I have made a copy of folder ORANT
from another machine and I did also import of Oracle key into my registry from this machine.
Forms seems to be working ok, I could edit and compile my form, but when I'm trying to execute my form I'm getting an error
FRM-40010 cannot read form c:\temp\test_form
Any idea would be helpful.
Brano

Copying the orant folder from one PC to another and importing the Oracle key is NOT the right way to install the software, it MIGHT SEEM to work fine but it never does.
You need to install it using Oracle Installer.
Make sure the FORMS45_PATH registry string contains the correct directory information where you store your forms.
Tony

ERROR: FRM-40010 : Cannot read form ...

When I try to run any form for second time from Oracle Forms Builder the browser prints mi html code instead of loading the form. And when try to call another form from the curret this error occurs - ERROR: FRM-40010 : Cannot read form ... I have add the path in the registry in the FORMS90_PATH
Can you help me, please?

Hi,
Cause: One of the following:
1. You entered a nonexistent form name.
2. You typed an incomplete path.
3. You do not have the proper privileges to run the form.
4. You do not have a compiled copy of the form.
Action: Retype the form name correctly, provide the proper path name, compile the form.
Moreover you said that you have added path in FORMS90_PATH. Does your forms really exists in this directory. Check out this also.

FRM-40010 - Cannot read form when using Call_form on Unix 9iAS

Hi,
I'm using 9iAS on a unix server. However, the main form calls several other forms using CALL_FORM('formnam'); but it cannot read any of the forms. I've ensured that they have all been compiled on the server. They compiled successfully.
I've also ensured that they are all residing in the FORMS60_PATH. Although it can find the main form OK, it cannot read any of the other forms. They are all located in the same directory.
What can be causing this error?

Make sure that formname is the name of the .fmx file and that you use the same case as it is in the file system, because UNIX is case-sensitive.
How are you setting FORMS60_PATH? If you're using the Forms Listener Servlet and are setting the FORMS60_PATH in default.env, be sure that the variable name is spelled correctly. In the early versions of default.env that came out, there was a typo: FORSM60_PATH. So if people didn't notice this and just uncommented the line and set the path, they would get FRM-40010.

Intermittent error FRM:40010 Cannot read form

Hi,
I'm having a problem with call_form
Using Forms 6.05.34 Client-server
clients machines are Win95/98
Oracle objects sits on network novell server (fmx's,rep's and oracle executables)
Application starts from icon which sets working directory using "start in"
I navigate between forms using call form and run reports using run_product
-- sample call form:
LIST_ID := Get_Parameter_List ('callass');
If NOT Id_Null(list_id) THEN
Destroy_Parameter_List (list_id);
END IF;
List_id := Create_Parameter_List('callass');
Add_Parameter(list_id,'param_ass_cli', text_parameter,
:assessments.cli_clients_rec);
Add_Parameter(list_id,'param_ass_rec', text_parameter,
:assessments.assessments_rec);
CALL_FORM('ASSESSMENTSC', HIDE, DO_REPLACE, NO_QUERY_ONLY, LIST_ID);
-- sample run product
RUN_PRODUCT(REPORTS, 'CLIENT_ASSESSMENT', SYNCHRONOUS, RUNTIME, FILESYSTEM, list_id, ''); -- also pass parameter list
Global variables are set and reset, parameters are set and reset to null in forms after opening
all forms closed with exit_form
The calendar library is attached to the form. (calendar.pll and stndrd20.olb on network)
We do not set working directory in forms60_path and do not want to for many reasons. Also do not hard code path with form name in call_form for same reasons.
After using system, calling and exiting several forms and running reports. Must run reports that are sent directly to printer before error occurs. (Frm-40010)
Users must exit back to starting menu or exit application and restart.
Only 3 forms and 2 reports are really in use.
Query on Browse form calls editing form which runs report (auto prints) then calls 3rd form which runs report (auto prints). Exit to 2nd form then exit back to browse form (query again .. repeat)
After 3 or 4 repeats the error appears.
As developer, I can only reproduce the error when running oracle from network folder (running oracle executables from network)not when running from my desktop.
Any ideas
Thank you
David
[email protected]

Hi,
Cause: One of the following:
1. You entered a nonexistent form name.
2. You typed an incomplete path.
3. You do not have the proper privileges to run the form.
4. You do not have a compiled copy of the form.
Action: Retype the form name correctly, provide the proper path name, compile the form.
Moreover you said that you have added path in FORMS90_PATH. Does your forms really exists in this directory. Check out this also.

RWMS Login issue: FRM-40010 cannot read fmx file.

Hi Experts
I installed RWMS R13.1 on 10.1.2.3 and used below url to open it first time.
http://machine:7779/forms/frmservlet?config=application_name
It throw below error
FRM-40010 cannot read fmx file.
Please help.

hi,
check the application configuration. It might be pointing to the wrong path of the compiled oracle forms (.fmx) or simply the forms have error during compilation
Edited by: user8871651 on May 12, 2012 1:17 AM

Frm-40010 with jinitiator form launch

We are trying to get our app to start via a web page by having the applet tag use the Jinitiator, etc. etc. We are getting a FRM-40010 error saying that it can't find the form on the Unix server, even though we are giving the complete path on the Unix box. Is there some setting that we need to modify to get it to find the FMX files? They are there and compiled in the directory we're pointing 'serverargs' to. Help please!

Since you mention the word Unix then check out the CASE of the the filename and the attached libraries ...
Also, you mention SERVERARGS - Have you set the FORMS_PATH up in the server config ?

FRM-40010 cannot read from maninda.fmx

My form works once when I run it from a new startup of my fmx file however when i use the service or run it again
i get the above error from the run form on the web and HTML error on oracle forms developer as follows:
<html> <head> ORACLE FORMS.</head>
<body onload="document.pform.submit();" >
<form name="pform" action="http://D675PM0J:8889/forms90/f90servlet" method="POST">
<input type="hidden" name="form" value="C:\Documents and Settings\kammy\Desktop\MANINDA.fmx">
<input type="hidden" name="userid" value="SCOTT/PASSWORD@maninda">
<input type="hidden" name="obr" value="yes">
<input type="hidden" name="array" value="YES">
</form> </body></html>

Hi,
this is a problem we randomly experience with Forms 9i and XP. Please set or create a registry entry FORMS90_HIDE_OBR_PARAMS and set its value to 0 (zero)
Frank

FMR-40010: Cannot read form

I have a unusual error. I have been successful running other forms from the same directory, but I have a new form (the Webutil demo form for 10g). I have configured Webutil to the letter as described in the instructions. When I attempt to run the form I get this error. I do not have Application Server installed, only Forms and Reports server. Could this be the issue?
Does Webutil expect to use functionality from Application Sever 10g, or does the Forms and Reports server install cover the bases.

If other forms in the same directory do work, it probably means that your forms_path is OK (unless you use a hard coded path somewhere). Maybe the file permission of the newly installed form is incorrect.

Cannot start Forms Server on new install

Hi:
I am running Oracle 10g database release 10.1.0.5.0 (database running fine)
I have installed from CD the Oralce Application Server - Forms and Reports Server Version 10.1.2.0.2
The processes appear to be running fine.
When I logon to AS Enterprise Manager, it shows "Forms" as being unavailable and the Home page shows a status of Down.
From my browers I can run ...llocalhost:7777/forms/frmservlet?config=jiptest&from=jiptest
How can I start the Forms Server? Where can I find the error log?
Please help.
Thanks.
Bruce

Thanks. That helps.
Let me just ask you one other thing. I have a form app that runs fine on a different host. Now, I have a new host and a new database (same DB user and objects). When I try to launch the forms app, the scrren is blank but the status line show that that applet started.
Must a recompile the app against the new database on the host or is there a way that I can debug why it is not opening correctly?
Thanks.
Bruce

FRM-41041 Cannot find form module: invalid ID

I'm getting this error when opening (E-Buiss) a copy of ARXTWMAI - transactions. The form show this error but seem to work fine !??
The only change I made to the form was changing the Form Name property. When changing it back the error dosn't show.

Solution:
Found this code in library ARXTWMAF.pll and changed the hardcoded part 'ARXTWMAI' to name_in('system.current_form') :
Set_Form_Property('ARXTWMAI',
FIRST_NAVIGATION_BLOCK,
app_custom.get_win_attr( l_first_window,
null,
'WIN_CORR_BLOCK'));
changed to:
Set_Form_Property(name_in('system.current_form'),
FIRST_NAVIGATION_BLOCK,
app_custom.get_win_attr( l_first_window,
null,
'WIN_CORR_BLOCK'));

FRM-40010 Cannot acces form in a new config

Similar Messages

Maybe you are looking for