FRM-41219 Cannot find report Invalid ID

I am getting this message when i try to run report from form in Oracle10g Forms, The coding is
declare
     repid report_object;
     v_rep varchar2(100);
begin
     repid:=find_report_object('erp_emp_asgn');
     v_rep:=run_report_object(repid);
end ;
I already set REPORTS_PATH in Registry to C:\new_Erp
Please anybody can solve this problem
Thank You

Aslam o Alikum (hi)
In report section of form builder add a report item with name "erp_emp_asgn". i will work fine.
Take Care
Allah Hafiz

Similar Messages

FRM - 41219 CANNOT FIND REPORT INVALID ID - CALLING REPORT FROM FORM

I am using Developer Suite 10g (forms 9i, reports 9i) . windows XP.
I am using the following code in WHEN-BUTTON-PRESSED-PRESSED trigger in form to call report.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
BEGIN
repid := find_report_object('C:\EMP.RDF');
v_rep := RUN_REPORT_OBJECT(repid);
END;
as as result It is displaying FRM - 41219 CANNOT FIND REPORT INVALID ID.
I have used the EMP.JSP also in find_report_object built-in. But there is no difference.
what could be the reason - plz give the solution.
with thanks
by GMS

Unless you made a mistake and overlooked it, what I suggested should work. Having said that, you did not mention the exact Forms version you are using. There may have been a problem in the version you are using which was corrected in a later release. I tested the example I offered using Forms 10.1.2.3 and it works correctly. Carefully review what you did. Verify that the file actually exists in the file system. Also, I would recommend renaming the file with all lower case letters and referencing it in the form with all lower case letters. Here is the complete code of the form I tested. I will also include the property values from the Report object.
Report1 settings:
Name - REPORT1
Subclass Information -
Comments -
Filename - dummy.rdf
Execution Mode - Batch
Communication Mode - Synchronous
Data Source Data Block - <Null>
Query Name -
Report Destination Type - File
Report Destination Name -
Report Destination Format -
Report Server -
Other Reports Parameters - On the form create the following items in BLOCK1:
Text fields:
<li>SERVERNAME
<li>REPNAME
<li>OTHERPARAMS
Button:
<li>CALL_REP
In the WHEN-BUTTON-PRESSED trigger add this code:
Declare
repid REPORT_OBJECT;
v_rep varchar2(256);
rep_status varchar2(256);
Begin
   repid := find_report_object('REPORT1');
-- Set Report Object properties
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'HTML');
-- Comm mode 1 = SYNCHRONOUS
-- Comm mode 2 = ASYNCHRONOUS
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, 1);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, :block1.SERVERNAME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, :block1.REPNAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,:block1.otherparams);
SYNCHRONIZE;
-- Run report and get status
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
SYNCHRONIZE;
-- Wait for Reports to generate results
    WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
    LOOP
      rep_status := report_object_status(v_rep);
    END LOOP;
    SYNCHRONIZE;
-- If DESTYPE is appropriate for displaying to user, execute WEB.SHOW ;
    IF rep_status = 'FINISHED' THEN
      WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||:block1.SERVERNAME,'_blank');
    ELSE
      message(rep_status);
    END IF;
END; When you run the form, enter the Report Server name and the Report filename (include the path if you have not configured REPORTS_PATH). Then click on the button. Note that the substr logic may need to be altered slightly if you are using an old version of Forms/Reports.
.

Cannot find report Invalid ID

I am running Oracle10gAS, and running report from form and getting this message "FRM-41219: Cannot find report Invalid ID" The coding is
declare
     repid report_object;
     v_rep varchar2(100);
begin
     repid:=find_report_object('erp_emp_asgn');
     v_rep:=run_report_object(repid);
end ;
I have already set REPORTS_PATH =c:\new_erp;
But still i am getting the same message
Please if somebody can help me.
Thank You

Did you define a Report Object in Forms Builder called 'erp_emp_asgn'?

Frm-41219 Error finding report

Hi everyone
I am trying to run report from a push button from form.Every time i am getting error FRM-41219 Cannot find report. Invalid ID.
Of course report exists and is compiled.I specified REPORTS_PATH variable in registry to point to my folder,
PROCEDURE print_report IS
repid REPORT_OBJECT;
report_job_id VARCHAR2(100);
BEGIN
repid := FIND_REPORT_OBJECT('DEPARTMENT');
report_job_id := RUN_REPORT_OBJECT(repid);
END;
Is tis a report Services Settings issue? What settings need to be done in Report Services? Or there is some other reason.
Please help me, I am stucked
Thank u

Hello,
'DEPARTMENT' in
repid := FIND_REPORT_OBJECT('DEPARTMENT');
is not the name of a REP or RDF file, it is the name of
a report object which should have been created in Forms.
You can check if the object exists in the Forms Builder :
Open the FMB
Go in the "Object Navigator"
Check if an Object called DEPARTMENT exist under the
Reports node. (If it does not exist, create it)
Regards

FRM: 41056 Cannot find block Invalid ID (Solved)

Hi Gurus,
I have a package Variable(x) declared in the package spec(Y) of my form.
In when_button-pressed trigger I wrote code like this.
Y.X:=NULL;
I am getting FRM: 41056 Cannot find block Invalid ID.
Can anyone please help me on this regard?
Message was edited by:
Forms

Gurus,
thanks for your advice.
Actually in the package specification (in Forms) there was some other varible whose initial value was based on a block which did not exist in my forms.
So that caused the problem.
Sorry for the silly question.
Thanks,

Develop query_find encountering 'FRM-41052: cannot find window: invalid ID

hi，dear all.
I 'm using forms 6i to develop query_find function.
I have Written the query_find trigger on the datablock as follows:
app_find.query_find('W_MAIN', --'Window name of Data Block'
'W_QF', --'Window Name of Query Find Block'
'B_QF'); --'Query Find Block Name'
but when I click the torch , the query_find window come out after three times of showing of the error message 'FRM-41052: cannot find window: invalid ID'. So every time I have to click three times 'OK' to close the annoying message.
Can anybody give me some guides how to realise query_find?? how to avoid this error message??
thanks in advance!

set_window_property('MAIN_WINDOW', TITLE, 'PACKAGE DETAILS');
Make sure that you have a window named 'MAIN_WINDOW';
YES, I do have.
form_setup_pkg.event('WHEN-NEW-FORM-INSTANCE');
IF :PARAMETER.P_PACKING_ID is NOT NULL THEN
EXECUTE_QUERY;
END IF;
Which is the code of this package?
PACKAGE BODY FORM_SETUP_PKG IS
PROCEDURE EVENT ( i_event IN VARCHAR2 )
IS
BEGIN
     Modify this package body to add events during form startup
     and to modify the window name and window title
     IF i_event = 'PRE-FORM' THEN
SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW,WINDOW_STATE,MAXIMIZE);
SET_WINDOW_PROPERTY('BLOCKNAME',WINDOW_STATE,MAXIMIZE);
SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, TITLE, 'GEMS');
set_window_property('BLOCKNAME', TITLE, 'Template Form');
     ELSIF i_event = 'WHEN-NEW-FORM-INSTANCE' THEN
          null;
     ELSE
          null;
     END IF;
END EVENT;
END;
SELECT ORDER_NUMBER,CLIENT,QUANTITY,PACKING_ID,LETTER_ORDER_CODE,
ACTUAL_CARRIER,LETTER_ORDER_NUMBER,ACTUAL_SHIPMENT_TYPE,WEIGHT,PACKAGE_NUMBER FROM PACKING WHERE CLIENT = :1
Where you set field client?
This is my code I am not selecting client anywhere, I dont know from where "Display error" is fecthing client query.
Thanks a lot for your help.
PACKAGE BODY ORDERS IS
PROCEDURE post_query IS
BEGIN
SELECT     pa.ship_to_last_name,
     pa.ship_to_first_name,
     pa.ship_to_address1,
pa.letter_order_number,
     pa.letter_order_code,
INTO :ORDERS.SHIP_TO_LAST_NAME,
:ORDERS.SHIP_TO_FIRST_NAME,
:ORDERS.SHIP_TO_ADDRESS1,
:ORDERS.LETTER_ORDER_NUMBER,
:ORDERS.LETTER_ORDER_CODE,
     :ORDERS.DC
FROM packing_attr pa
WHERE pa.packing_id = :ORDERS.PACKING_ID;
end post_query;
END orders;
Thanks
Sandy

FRM-41045 cannot find item invalid id

Hi All,
I was working with custom form my form version is 10g.
We have developed a custom form in that we have a field called invoice_date
Invoice_date declare as Date column.
And we have given all other in the property pallatte correctly.
When we click the invoice_date field this pop message is coming
FRM-41045 cannot find item invalid id 10-15 times and then we are selecting the date.
Regards
Srikkanth

Hi,
You better post it on e-business suite dedicated forum, you will have people with more expertise on customization there. Its always good that you give complete information in your post like your version,environment,etc
See if you disable the call to the calendar.show and clicking the field is giving you any error.
Regards
Yoonas

FRM-41052:Cannot Find Window : Invalid Id

Hello,
I have developed a New Form and wanted to use the calendar in the date fields. I had added all the codes and when I added the APPSTAND.fmb in the same directory where my form lies, it gives this error : -
"FRM-41052:Cannot Find Window : Invalid Id" .
The First window gets displayed, where I feed in the parameters using LOV and then when I click on the FIND button, I get this error message window for 4-5 times before I get into the next window.
If the APPSTAND.fmb is removed from that directory, the Form runs fine without displaying the Calendar for the Date field.
Please letme know how should I go about in handling this issue.
Any suggestions would be helpful.
Thanks,
Dev

Hi Dev,
Can you send me screen shot.
My mail id is [email protected]
aessk

FRM-41045: Cannot find item: invalid ID (what's the ID?)

Hi!
When Forms run:go_item('<block_name>.<item_name>');and there's no such item in that block the error FRM-41045 appears. Is there any way to find out this "invalid ID"?
That information whould be very helpful in finding block of code resulting in this error.
Thanks in advance,
JackK

JackK wrote:
Hi!
When Forms run:go_item('<block_name>.<item_name>');and there's no such item in that block the error FRM-41045 appears. Is there any way to find out this "invalid ID"?
That information whould be very helpful in finding block of code resulting in this error.
Thanks in advance,
JackKYou can "address" items in form by their name or by the ID. The ID for an item can be retrieved by FIND_ITEM.
That forms is not returning the item-name in a 41045 is a PITA since ever.
I recommend that you just wrap every GO_ITEM into another procedure, where you
.) try to find the item
.) raise an error-message with the item name
if the item does not exists.

FRM-41219 - Cannot able to call reports from form generated in Designer

Hi
I'm trying to call a report from form whit a button generated in Designer 10.1.2.0.2
But I'm getting error : FRM-41219 Invalid report id
I'm tying with a menu but I'm getting the same error.
Please help me

Note 1056653.6
FRM-41219 Cannot Find Report: Invalid ID
Problem Description:
You are getting error: FRM-41219 Cannot Find Report: Invalid ID
Problem Explanation:
The code is using find_report_object and passing a report name to the function.
The statements are as follows:
DECLARE
repid REPORT_OBJECT;
BEGIN
repid := FIND_REPORT_OBJECT('report1');
END;
Solution Explanation:
The error message frm-41219 is a new error code which corresponds to the
Oracle Developer forms/report integration.
This message essentially means that the report cannot be found. Specifying the
correct name of a report object found in the forms object navigator (not the
actual name of the rdf file) usually resolves the problem.

FRM-41219 when run report having a form opened

I cannot run a web report (called from the menu) if any form is opened.
I'm getting error: FRM-41219 Cannot Find Report.
If the form is minimized, I can execute the report successfully.

Hi Leontin,
Can you explain what exactly you mean "If the form is minimized" ?
What exact Reports & Forms version are you using ?
Is this error consistent whenever you run a web report ?
Are you getting for any web report / for a specific Report ?
Thanks,
Vinod.

Paybles Invoice Batch Cannot find item: Invalid ID In R12

Hi All,
While running invoice batch when we click on item it is giving error like Invalid id. Please suggest me.
Thanks,
Red.

RED,
Have a look at the following note, it may be helpful.
Note: 553646.1 - R12 Cannot Open Invoices Form Frm-41045: Cannot Find Item: Invalid Id
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=553646.1
Regards,
Hussein

URGENT : FRM-41219 Can not find report : INVALID ID

hello all
The same problem i have also posted in forms forum..
i am getting the exception FRM-41219 when calling the report from my form with the method RUN_REPORT_OBJECT.
I m calling the report in my program unit method as follows :
DECLARE
Pl_Id ParameterList;
RepId REPORT_OBJECT;
Vrep Varchar2(1000);
BEGIN
add_parameter(pl_id,'report_parameter',text_parameter,record_block.input_box);
RepId := find_repor_object('report_name');
Vrep := RUN_REPORT_OBJECT(RepId,Pl_Id);
END;
But when i run the fmx .. i get the exception "FRM-41219 can not find report :Invalid ID"
I have checked all possiblities i.e. i have also called the method as RUN_REPORT_OBJECT(RepId) and also RUN_REPORT_OBJECT(ReportName)..but in all cases i am getting the same error..i have also checked the environment variable ..it contains the correct path of my application folder where the report is available.
Kindly help me with this
if any body knows the solution..or the cause for it..please let me know here or contact me on this address
[email protected]
thank you.

Try this:
DECLARE
Report_Id report_object;
v_rep varchar2(200);
rep_status varchar2(20);
BEGIN
report_id:=FIND_REPORT_OBJECT('EMP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,:REPORT_NAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,:REPORT_DESFORMAT);
if :REPORT_DESTYPE='CACHE' then
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
elsif :REPORT_DESTYPE='FILE' then
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
end if
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:REPORT_DESNAME);
v_rep := RUN_REPORT_OBJECT(report_id);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed');
else
message('Error when running report.');
end if;
END;
Thanks
Rohit

Frm 41052: cannot find window. Invalid window id

Hi,
I have a form which is opening only to half its size where i have given width=650 and height=500 in formsweb.cfg. Also i get error
frm 41052: cannot find window0. Invalid window id
but i have asscoiated the canvas with window0 in the property palette.
What do i do? Pls help

This is probably a silly question, but does window0 exist in the form?

FRM : 41067 Cannot find menu item id ( forms 10g Menus/Forms Conversion )

Hi All ,
We have menus converted into forms 10g using the forms migration assistant FMA ( frmplsqlconv ) . Now , we had the menus (.mmb) which had used Shared Menus.
After conversion observed that there were some duplicate copies of the shared menus created automatically and each reference where this shared menu was used was replaced by the newly created ones.
Now , when I open the form that uses the menu I get the following error :
FRM : 41067 Cannot find menu item id
On debuggin observed the the above error was generated at :
set_menu_item_property(SHARED_MENU.ITEM,.... )
Not sure how this worked in forms earlier version and not working in 10g now.
Could anyone please let me know how to go about to fix this issue and why is this happening at the first point.
Is re-creating the menu from scratch the only option to resolve the issue ?
Please advise ..
Thanks ,

Hi
Error Message: FRM-41067: Cannot find Menu Item: invalid ID.
Error Cause:An invalid ID was passed to a built-in subprogram.
Action:Verify that a proper call to FIND_MENU_ITEM will be performed. Level: 20 Type: Errori think c1 returns null pls check ur Query in the cursor ; run & test if it returns data or not & check the name of the menu that should actually match with the name stored in the db.
If the error still existing then u can get reide of it with a simple line check using FIND_MENU_ITEM as follow...
PROCEDURE disable_menu_items IS
mi_id MenuItem;
val varchar2(10);
BEGIN
IF :Global.user_code '01' THEN
IF :GLOBAL.VC_ROLE_CODE '01' THEN
declare
cursor c1 is
select vc_menu_code,vc_menu_name from
makess.mk_module_menu a where
vc_module_code='06' and
not exists(select vc_menu_code
from makess.mk_roles_menu_inv b
where vc_comp_code=:global.vc_comp_code
and a.vc_menu_code=b.vc_menu_code
and ch_role_code=:global.vc_role_code);
BEGIN
for crec in c1
mi:=FIND_MENU_ITEM('MENU.MENUITEM');
IF NOT ID_NULL(mi) THEN
loop
set_menu_item_property(crec.vc_menu_name,ENABLED,Property_false);
end loop;
END IF;
END;
:global.check:='N';
END IF;
END IF;
END;Hope this helps...
Regards,
Abdetu...

FRM-41219 Cannot find report Invalid ID

Similar Messages

Maybe you are looking for