From which table can I display PGI (material and quantity)for a spesific cu

Dear gurus,
From which table can I display PGI (material and quantity)for a spesific customer order?
Thanks in advance

HI
PGI and material quantity can be available in MSEG table
for this enter the sales order number in KDAUF or* MAT_KDAUF* fields in MSEG table
Also try with LIPS delivery item table and LIKP table
regards
SAP SD
Edited by: sapkpit_sd on Jul 22, 2010 8:14 AM

Similar Messages

In which table can I find the name and surname for a username ?

Hello,
I search the table with the master data of users. Specially I search the table where I can find the
name, surname for a user.
In which table can I find the name and surname for a username ?
Thanx in Advance

Hello everybody,
thank you for the helpful informations.
thank you very much
with kind regards
cetoman

From which table can we get the status of sales order

hi
from which table can we get the status of sales order

Hi
Check the Table VBUK for HEADER level status of Sales order
and VBUP for Item level statuses
enter VBELN = Sales order and VBTYP = C for sales orders
as VBUK and VBUP stores all Sales documents like deliveries, Invoices, quotations, contracts etc
Reward points for useful Answers
Regards
Anji
Message was edited by:
Anji Reddy Vangala

From which tables i would find the delivery and billing document field..??

I need to create an ALV report which displays the following details in the output.
Order No Item No Material Order Qty Item Category Plant Delivery Billing Document Sales Org Dist Channel Division Created By Created On Changed On
For(Order No Item No Material Order Qty Item Category Plant) i took the fields from vbap and
for(Sales Org Dist Channel Division Created By Created On Changed On)i took the fields from vbak..
From which tables i would find the delivery and billing document field related to sales document.??
need help...
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Mar 6, 2012 2:53 PM

i am new to abap...so i dont have idea about sd table relationship.
so please reply how to add delivery and billing doc in my coding below..
*& Report ZINAA_SD
REPORT zinaa_sd.
TABLES: vbap, vbak, vbfa.
TYPE-POOLS: slis.
CONSTANTS: c_x TYPE char1 VALUE 'X'.
TYPES:
 BEGIN OF st_vbap,
 vbeln TYPE vbap-vbeln,
 posnr TYPE vbap-posnr,
 matnr TYPE vbap-matnr,
 pstyv TYPE vbap-pstyv,
 kwmeng TYPE vbap-kwmeng,
 werks TYPE vbap-werks,
 END OF st_vbap,
 BEGIN OF st_vbak,
 vbeln TYPE vbak-vbeln,
 erdat TYPE vbak-erdat,
 ernam TYPE vbak-ernam,
 vkorg TYPE vbak-vkorg,
 vtweg TYPE vbak-vtweg,
 spart TYPE vbak-spart,
 aedat TYPE vbak-aedat,
 END OF st_vbak,
 BEGIN OF st_final,
 vbeln TYPE vbap-vbeln,
 posnr TYPE vbap-posnr,
 matnr TYPE vbap-matnr,
 pstyv TYPE vbap-pstyv,
 kwmeng TYPE vbap-kwmeng,
 werks TYPE vbap-werks,
 erdat TYPE vbak-erdat,
 ernam TYPE vbak-ernam,
 vkorg TYPE vbak-vkorg,
 vtweg TYPE vbak-vtweg,
 spart TYPE vbak-spart,
 aedat TYPE vbak-aedat,
 END OF st_final.
DATA:
 lt_vbap TYPE TABLE OF st_vbap,
 ls_vbap TYPE st_vbap,
 lt_vbak TYPE TABLE OF st_vbak,
 ls_vbak TYPE st_vbak,
 lt_final TYPE TABLE OF st_final,
 ls_final TYPE st_final,
 lt_fieldcat TYPE slis_t_fieldcat_alv,
 ls_fieldcat TYPE slis_fieldcat_alv,
 layout TYPE slis_layout_alv,
 lt_sort TYPE slis_t_sortinfo_alv,
 ls_sort TYPE slis_sortinfo_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln,
 s_erdat FOR vbap-erdat.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM select_data.
PERFORM loop_final.
PERFORM sort.
PERFORM a USING:
 'VBELN' TEXT-002,
 'POSNR' TEXT-003,
 'MATNR' TEXT-004,
 'KWMENG' TEXT-005,
 'PSTYV' TEXT-006,
 'WERKS' TEXT-007,
 'VKORG' TEXT-008,
 'VTWEG' TEXT-009,
 'SPART' TEXT-010,
 'ERNAM' TEXT-011,
 'ERDAT' TEXT-012,
 'AEDAT' TEXT-013.
PERFORM display.
*& Form SELECT_DATA
 text
FORM select_data.
SELECT
 vbeln
 vkorg
 vtweg
 spart
 ernam
 erdat
 aedat
 INTO CORRESPONDING FIELDS OF TABLE lt_vbak
 FROM vbak
 WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
IF sy-subrc = 0.
 SORT lt_vbak by vbeln.
ENDIF.
SELECT
 vbeln
 posnr
 matnr
 kwmeng
 pstyv
 werks
 INTO CORRESPONDING FIELDS OF TABLE lt_vbap
 FROM vbap
 FOR ALL ENTRIES IN lt_vbak
 WHERE vbeln = lt_vbak-vbeln.
IF sy-subrc = 0.
 SORT lt_vbap by vbeln.
ENDIF.
ENDFORM. "SELECT_DATA
*& Form LOOP_FINAL
 text
FORM loop_final.
LOOP AT lt_vbap INTO ls_vbap.
 ls_final-vbeln = ls_vbap-vbeln.
 ls_final-posnr = ls_vbap-posnr.
 ls_final-matnr = ls_vbap-matnr.
 ls_final-kwmeng = ls_vbap-kwmeng.
 ls_final-pstyv = ls_vbap-pstyv.
 ls_final-werks = ls_vbap-werks.
 READ TABLE lt_vbak INTO ls_vbak WITH KEY vbeln = ls_vbap-vbeln BINARY SEARCH.
 ls_final-vkorg = ls_vbak-vkorg.
 ls_final-vtweg = ls_vbak-vtweg.
 ls_final-spart = ls_vbak-spart.
 ls_final-ernam = ls_vbak-ernam.
 ls_final-erdat = ls_vbak-erdat.
 ls_final-aedat = ls_vbak-aedat.
 APPEND ls_final TO lt_final.
 CLEAR ls_final.
ENDLOOP.
ENDFORM. "LOOP_FINAL
*& Form SORT
 text
FORM sort.
ls_sort-spos = '01' .
ls_sort-fieldname = 'VBELN'.
ls_sort-tabname = 'LT_FINAL'.
ls_sort-up = c_x.
ls_sort-subtot = c_x.
APPEND ls_sort TO lt_sort .
ENDFORM. "SORT
*& Form A
 text
 -->FNAME text
 -->SELTEXT text
 -->EMPHA text
FORM a USING fname TYPE string seltext TYPE string.
IF fname = 'KWMENG'.
 ls_fieldcat-do_sum = c_x.
ENDIF.
ls_fieldcat-fieldname = fname.
ls_fieldcat-seltext_m = seltext.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ENDFORM. "A
*& Form ALV
 text
FORM display.
layout-zebra = c_x.
layout-colwidth_optimize = c_x.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
 is_layout = layout
 it_fieldcat = lt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
 it_sort = lt_sort
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = C_X
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
 TABLES
 t_outtab = lt_final
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "ALV

After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

Restoring the iPhone will reload its firmware.
Plug the iPhone into (the current version of) iTunes on your computer.
Let it sync. Then choose "Restore" from the iPhone's summary page in iTunes.

Which Table, can I find the class and characteristic assigned to equipment.

Hi all,
I have assigned a characteristc to a class.
And assigned this class to an equipment.
Now in which table can i find the class assigned to this equipment.
What is the logic to find the class and characteristic.
Thanks in advance.
Piyush

Hi,
As per above post, you can find classes. To find characteristics, Give EQUNR value in OBJEK field in AUSP table & get the ATINN value.
Give ATINN value in ATINN field in CABN table & get ATNAM field value.
In AUSP table, you can get the values against each characteristics as well.
Regards,
Maheswaran.
Edited by: Maheswaran.K on Apr 19, 2011 9:28 AM

The position of the worker, from which table can I get?

Hi,
Whether a person with a given pernr, how can I know whether he is a manager or an employee etc.
Which table and which field of this table.
Thanks.

Hi,
To get the position for a person you need to go to table PA0001 table (PLANS field).
Once you get the position, to check whether that position is Manager's position
You need to go to table HRP1001 and check whether is there any entry exist for the position with relationship 'B002' (SUBTY field), if entry exists then the position is manager's position. The all the entries in SOBID fields are subordinate position to the managers position.
Hope this helps,
Shrinivas

From which table I can find the "Class type" and "Class" of the material?

From which table I can find the "Class type" and "Class" of the material?
Thanks in advance for the answers....

Hi,
try following table
KSSK     Material number to class
KLAS     Class description
KSML     Characteristic name
CABN/CABNT     Characteristic name description
CAWN/CAWNT     Characteristic name
[http://www.sap-img.com/materials/classification-view-of-material-master.htm]
[http://wiki.sdn.sap.com/wiki/display/ERPLO/FrequentlyUsedTables]
Regards
kailas Ugale

From which table we can get the Role of the User in SRM

Hi All,
I need to prepare a report which displays the user and his role in srm. So from which table i can get the role of the user if i have the Userid.
Thanks
Channappa Sajjanar

Hi
t- code
SUIM->rOLES->BY USER ASSIGNMENT
SELECT WITHASSIGNMENT OF USER = username
AS A OUTPUT YOU MAY GET ROLE ASSIGNED TO THAT USER.
if you want which FM - you debug while executing this report.
regards
Muthu

From which table we can find account details?

Hi,
I'm working on Inventory reports.
I have a scenario where I need to display the account details based on "REFERENCE_ACCOUNT" column in table MTL_TRANSACTION_ACCOUNTS.
From which table we can find account details?
Tahnkyou
BalaKrishna

Hi Bala
You can user tab table which have the information of every table exist in your schema.
you can use select from tab where tname like '%ACCOUNTS%'*
i think it will help u.

From which table i can get the details of cancled documents

Hi All,
here is an quarry,
Iam haveing an Z report on purchase tax which has all tax report.
but now the user want to same details for cancled document
also.So can any help me from which table i can fetch the data
urgent ! pls help me out!
Regards,
Rajashekar

Cancelled documents will not be stored in Diff tables..
It will be stored in the Same tables..
For PO
EKKO header level
EKPO Item Level
EKBE Po History
Material Doc
MKPF Header
MSEG Item
Invoice
RBKP Header
RSEG Item

In which tables can I find the sd texts in the material register?

Hi,
In which tables can I find the sd texts in the material register?
Thanks.

Hi,
The texts are stored in tables STXH , STXL etc. But it is not possible to fetch the details directly from the tables. You have to use the function module READ_TEXT where you have pass the parameters Text ID, Language, object as material number etc to fetch the text.
You can take the help of an ABAPer to create a program for this.

How to Find out the from which table we can get the following fields?

The following fields are from invoice data
How to know or from which table we get the following fields:
Header Details:
Manifest:, Finance Control #:, Alternate SID:, Carrier:, Container/Trailer #:, Hazmat Code:, Harmonizing Code, Freight Forwarder, Fiscal Rep., Ship From, Notify Party
Item Details:
VAT/Tax Rate %, VAT/Tax Amount, Measurements, Net Weight, Gross Weight
thanks

Dear Krishnama
Place your mouse on the required fields and press F1. A box with header Performance Assistant will appear in front of you where you select "Technical information" (icon like hammer and spanner).
You can now see what table it is.
thanks
G. Lakshmipathi

From which table i can get the long text

Hi All
I have created some long text through function module CREATE_TEXT And i am able to see the text in the transaction .
My requirement is from which table i can get these stored long text???
Any suggestions please.
Thanks

Appreciate your answers.
I have checked the both the fields stxh as well as stxl but i am not able to find any text fields out there.
My actual requirement is some third party software needs to b mapped the table fields in order to import it.
So if i know the table fields that would be easier.
Can you tell me y we can not read it from the tables?
Thanks,
@run.

From which table I can get Vendor characteristic values ?

Hi Everybody,
From Which table I can get Vendor Characteristic values from Vendor classification ?
Thanks & Regards,
Nagaraju Maddi

Hi
Check the Tables
CABN and AUSP
or use the following
Use the following BAPI's:
BAPI_OBJCL_GETDETAIL
or use the fun module:
CLAF_CLASSIFICATION_OF_OBJECTS.
Reward points for useful Answers
Regards
Anji

From which table can I display PGI (material and quantity)for a spesific cu

Similar Messages

Maybe you are looking for