FTP Adapter On in a Clustered Environment

Hi everyone,
I noticed that in a clustered environment (3 servers) an FTP Adapter using the “File Modification” feature to get files will get the file 3 times. Is there some configuration that can be done to stop that from happening?

Try adding Singleton property to adapter and set it as TRUE.
For reference check this blog - Mark's Blog: File Adapter in Oracle SOA 11g cluster environment

Similar Messages

FTP Adapter in clustered/HA environment

We are deploying a clustered environment and are noticing that the FTP adapter seems to be running in both servers.
I deployed a listening channel using the VIP connection. It activated the FTP channel on one server but the other server is giving invalid username/password.
I then log into the first server bypassing the VIP and I see that it is deployed and has the username/password populated.
I then log onto the second server bypassing the VIP and see that the username/password is not populated.
Should this be happening? Is there something that we need to configure/setup differently?
We are on 11.1.1.2.

Should this be happening? Is there something that we need to configure/setup differently?I don't think so however for polling transports, only one managed server of a cluster is used to avoid duplicacy but in your case you are getting an error in the other server, which I don't think, is a normal behaviour. I would suggest to contact Oracle Support for resolution.
BTW, it would be better if you may upgrade your system to PS2 (11.1.1.3) and test once again.
Regards,
Anuj

FTP adapter config in clustered environment

Hi,
Here i have two soa servers(soa_server1, soa_server2) in a single cluster(soa_cluster) in one machine.
And after all the repective configurations i'm trying to use the FTP adapter.
When we place one file in FTP input location for processing, it’s been processed by both the servers(soa_server1,Soa_server2) resulting in 2 outputs records of same file.
Whereas I’m expecting only one record as output for one input provided.
Can anybody pls suggest if there are any settings need to made?
Thanks in advance:)

Try adding Singleton property to adapter and set it as TRUE.
For reference check this blog - Mark's Blog: File Adapter in Oracle SOA 11g cluster environment

Regarding issue sender file adapter in clustered environment(PI 7.0)

Hi Experts,
we are using sender file adapter in clustered environment(there are 6 J2EE cluster nodes in XI system) for an interface.the file sender communication channel for this interface is scheduled to run twice every day. recently the channel stopped polling (picking the files from the source directory) and i dont see any error.
when i open Communication Channel monitoring in RWB and select the file sender communication channel and run it manually, none of the cluster nodes are polling for the file.
i have tried editing the communication channel in Integration Directory and activating it. but it does not pick the file.
Can you let me know how the issue can be resolved.
Thanks
-Kaushik
Edited by: Kausik M on Dec 18, 2008 4:13 AM

Kausik,
A computer cluster is a group of linked computers, working together closely so that in many respects they form a single computer. The components of a cluster are commonly, but not always, connected to each other through fast local area networks. Clusters are usually deployed to improve performance and/or availability over that provided by a single computer, while typically being much more cost-effective than single computers of comparable speed or availability.
clearly your cluster nodes are out of sync...!!!!
It is possible that your ftp server went down for a while . And in the profile of FTP machine the entry of XI server is not made permanent .
1. Try to ping the FTP site from XI server.
BTW are u getting any error msg at RWB ?
Regards,

SAP Adapter Best Practice Question for Deployment to Clustered Environment

I have a best practices question on the iway Adapters around deployment into a clustered environment.
According to the documentation, you are supposed to run the installer on both nodes in the cluster but configure on just the first node. See below:
Install Oracle Application Adapters 11g Release 1 (11.1.1.3.0) on both machines.
Configure a J2CA configuration as a database repository on the first machine.
Perform the required changes to the ra.xml and weblogic-ra.xml files before deployment.
This makes sense to me because once you deploy the adapter rar in the next step it the appropriate rar will get staged and deployed on both nodes in the cluster.
What is the best practice for the 3rdParty adapter directory on the second node? The installer lays it down with the adapter rar and all. Since we only configure the adapter on node 1, the directory on node 2 will remain with the default installation files/values not the configured ones. Is it best practice to copy node 1's 3rdParty directory to node 2 once configured? If we leave node 2 with the default files/values, I suspect this will lead to confusion to someone later on who is troubleshooting because it will appear it was never configured correctly.
What do folks typically do in this situation? Obviously everything works to leave it as is, but it seems strange to have the two nodes differ.

What is the version of operating system. If you are any OS version lower than Windows 2012 then you need to add one more voter for quorum.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Problem in FTP adapter ( Duplicate)

Hi all,
We have a composite that query the events from Oracle on demand CRM. Event contains key column which is used to fetch all related values.
Using FTP adapter, we are placing the file in SAP and also one copy using file adapter in our local server for our reference.
Problem :
SAP is receiving two files in their inbound folder at same time stamp for one transaction.
But in our local server, we are receiving one file only.
So we isolated the problem to FTP adapter.
When we analyzed the process and its audit trail, everything looks fine and FTP operation is called one time only.
We are clueless regarding this problem.
Also same interface works well in Production instance. We even tried deploying new composite that is freshly downloaded from Production.
We need this to fix this by Wednesday as UAT begins in Test environment and that needs this interface to work fine.
We have clustered environment and 2 SOA servers.
Please someone help us identifying the problem. Its very urgent
Thanks,
Sundar

Hi it may be the problem with the environment. Try adding the property <property name ="singleton">true</property name> in the composite.xml for the FTP adapter or at the server level.
Swami

FTP Adapter not polling

Hi,
We have a clustered environment in Oracle SOA 10.1.3.4 MLR#1. We are setting up 3 different bpel processes polling 3 different locations and using 3 different data source. When we deploy them none of the ftp polling is working. We looked at various blog and added property for ClusterId
<property name="clusterGroupId">myBpelAdapterCluster</property>
I also tried using a different clustergroupid for each of the bpel process.
Does this clusterGroupId should be different for each BPEL process or can we use myBpelAdapterCluster for all 3. Please suggest me what may be the cause for the ftp adapter not polling.
Thanks
Jagan.

I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10

FTP Adapter Sync Read in SOA Suite cluster giving issues

Hello All ,
I am trying to use a FTP Adapter in sync read mode in bpel in clustered environment.
FTP Adapter has to sync read a file from a remote unix server. And during this the error that comes is file not found.
ORABPEL-11007
No Data to process.
File /o31364629.pdf to be processed was not found or not available or has no content
Whereas FILE IS THERE IN THE DIRECTORY.
This issue is coming intermittent . I do have some successful BPEL instances coming up.
But majorly its failing.
Now turnign the logs in DEBUG mode said its trying to create some temp file which is unable.
Caused by: ORABPEL-11440
Error in writing temp file after getting content.
Error in writing temp file after getting content for file: o31364629.pdf
Please ensure 1. the local filesystem has write permission 2. local file system is not full.
Please see below full log.
<2009-12-16 10:47:30,970> <INFO> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> FTPInteraction Created
<2009-12-16 10:47:30,971> <DEBUG> <LiebertServices.collaxa.cube.ws> <AdapterFramework::Outbound> file:/apps/erikap1/aerikap1/erikap1_SoaSuite/bpel/domains/LiebertServices/tmp/.bpel_Test_FTP_1.0_c904a18cefb4038ec3b754d37b34d2d1.tmp/New_FTP_adap.wsdl [ SynchRead_ptt::SynchRead(Empty,opaque) ] - Starting JCA LocalTransaction
<2009-12-16 10:47:30,971> <DEBUG> <LiebertServices.collaxa.cube.ws> <AdapterFramework::Outbound> file:/apps/erikap1/aerikap1/erikap1_SoaSuite/bpel/domains/LiebertServices/tmp/.bpel_Test_FTP_1.0_c904a18cefb4038ec3b754d37b34d2d1.tmp/New_FTP_adap.wsdl [ SynchRead_ptt::SynchRead(Empty,opaque) ] - Invoking JCA Outbound Interaction
<2009-12-16 10:47:30,971> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> FTP outbound adapter interaction invoked : oracle.tip.adapter.ftp.outbound.FTPReadInteractionSpec@17b7cfb
<2009-12-16 10:47:30,971> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> FileInteraction::PROPS ====>{}
<2009-12-16 10:47:30,972> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> Considering header for filename, output filename from header: o31364629.pdf
<2009-12-16 10:47:30,972> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> Not Considering header for directory as it is blank
<2009-12-16 10:47:30,972> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> FTP Agent Determined
<2009-12-16 10:47:30,972> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> FTPSource::Local Temp Directory is /ftpdata/elshap1/reach/fileftp/temp_ftp/localhost_LiebertServices_Test_FTP~1.0_/outbound
<2009-12-16 10:47:30,972> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> FTP Host: dianadb.emrsn.com
<2009-12-16 10:47:30,972> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> FTP Post: 21
<2009-12-16 10:47:30,973> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> FTP Username: elsha_p
<2009-12-16 10:47:30,973> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> FTP Keep Connections: true
<2009-12-16 10:47:30,973> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> FTP outbound adapter read file interaction invoked.
<2009-12-16 10:47:30,973> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> Outbound File Adapter received request to read file with parameters: { Directory=, FileName=o31364629.pdf, DeleteFile=false}, headers=[_directory=[], _filename=[o31364629.pdf], _props=[{}]]
<2009-12-16 10:47:30,974> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> Creating Temp File iwCmE1Jr7hUYMdXRISl0OA== Local Path: /ftpdata/elshap1/reach/fileftp/temp_ftp/localhost_LiebertServices_Test_FTP~1.0_/outbound Remote Dir:
<2009-12-16 10:47:30,976> <DEBUG> <LiebertServices.collaxa.cube.ws> <File Adapter::Outbound> Calling getContentsAsStream() on FTPAgent: dianadb.emrsn.com: type = FTP, host = dianadb.emrsn.com:21, username = elsha_p
directory = null, mode = STREAM, fileType = ASCII, maxRetries = 0 Localfile: o31364629.pdf Path: /ftpdata/elshap1/reach/fileftp/temp_ftp/localhost_LiebertServices_Test_FTP~1.0_/outbound/iwCmE1Jr7hUYMdXRISl0OA== Remote Dir:_
<2009-12-16 10:47:30,982> <ERROR> <LiebertServices.collaxa.cube.ws> <AdapterFramework::Outbound> file:/apps/erikap1/aerikap1/erikap1_SoaSuite/bpel/domains/LiebertServices/tmp/.bpel_Test_FTP_1.0_c904a18cefb4038ec3b754d37b34d2d1.tmp/New_FTP_adap.wsdl [ SynchRead_ptt::SynchRead(Empty,opaque) ] - Could not invoke operation 'SynchRead' against the 'FTP Adapter' due to:
ORABPEL-11007
No Data to process.
File /o31364629.pdf to be processed was not found or not available or has no content
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
     at oracle.tip.adapter.file.outbound.FileReader.readFile(FileReader.java:253)
     at oracle.tip.adapter.file.outbound.FileReader.executeFileRead(FileReader.java:168)
     at oracle.tip.adapter.file.outbound.FileInteraction.executeFileRead(FileInteraction.java:248)
     at oracle.tip.adapter.ftp.outbound.FTPInteraction.execute(FTPInteraction.java:172)
     at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:486)
     at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:479)
     at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:528)
     at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:285)
     at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:829)
     at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:412)
     at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:199)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3714)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1657)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:220)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:317)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5787)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1089)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:589)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:421)
     at sun.reflect.GeneratedMethodAccessor174.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
     at com.evermind.server.ThreadState.runAs(ThreadState.java:693)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at CubeDeliveryBean_LocalProxy_4bin6i8.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:141)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:58)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
     at java.lang.Thread.run(Thread.java:595)
Caused by: ORABPEL-11440
Error in writing temp file after getting content.
Error in writing temp file after getting content for file: o31364629.pdf
Please ensure 1. the local filesystem has write permission 2. local file system is not full.
     at oracle.tip.adapter.ftp.inbound.FTPSource.getContents(FTPSource.java:883)
     at oracle.tip.adapter.ftp.inbound.FTPSource.getFileFromSource(FTPSource.java:799)
     at oracle.tip.adapter.file.outbound.FileReader.readFile(FileReader.java:250)
     ... 43 more
I am using the setting for file adapter to avoid race condition in HA environment.
Set oracle.tip.adapter.file.controldirpath=/ftpdata/elshap1/reach in pc.properties file
This is shared folder accesible from both nodes & is given 777 full permission till the folder outbound where the temp fiel is getting created.
Please let me know if you have any idea on this.
This is a severe prodcution issue for us.
thanks in advance.
--Shivani

Just want to highlight the below portion in the log listed.
Caused by: ORABPEL-11440
Error in writing temp file after getting content.
Error in writing temp file after getting content for file: o31364629.pdf
Please ensure 1. the local filesystem has write permission 2. local file system is not full.
     at oracle.tip.adapter.ftp.inbound.FTPSource.getContents(FTPSource.java:883)
     at oracle.tip.adapter.ftp.inbound.FTPSource.getFileFromSource(FTPSource.java:799)
     at oracle.tip.adapter.file.outbound.FileReader.readFile(FileReader.java:250)
     ... 43 more
Thanks Shivani

Issue in Synchronous File Read in clustered environment

Hi,
We are using clustered environment (4 managed servers) in Unix. In a OSB 11gR3 proxy service we are using Synchronous File Read. Randomly we are getting the below error. Let us know what could cause the issue. But the same code is working fine in a single stand-alone server configuration.
Error Code : BEA-380002 , Error Reason : Invoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/wsdlPathAndName [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
No Data to process.
File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content ; nested exception is:
BINDING.JCA-11007
No Data to process.
No Data to process.
File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderNamer/Filename.txt to be processed was not found or not available or has no content Please make sure that the file exists in the specified directory.
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/wsdlPathAndName [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
No Data to process.
File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content ; nested exception is:
BINDING.JCA-11007
No Data to process.
No Data to process.
File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content Please make sure that the file exists in the specified directory.
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:153)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:598)
at sun.reflect.GeneratedMethodAccessor1115.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at $Proxy142.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:670)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatchSync(PipelineContextImpl.java:551)
at stages.transform.runtime.WsCalloutRuntimeStep$WsCalloutDispatcher.dispatch(WsCalloutRuntimeStep.java:1391)
at stages.transform.runtime.WsCalloutRuntimeStep.processMessage(WsCalloutRuntimeStep.java:236)
at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
at com.bea.wli.sb.stages.impl.SequenceRuntimeStep.processMessage(SequenceRuntimeStep.java:33)
at com.bea.wli.sb.pipeline.PipelineStage.processMessage(PipelineStage.java:84)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:1055)
at com.bea.wli.sb.pipeline.Pipeline.processMessage(Pipeline.java:141)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:1055)
at com.bea.wli.sb.pipeline.PipelineNode.doRequest(PipelineNode.java:55)
at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:1055)
at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:96)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:593)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:375)
at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl$4.run(JCATransportInboundOperationBindingServiceImpl.java:415)
at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl$4.run(JCATransportInboundOperationBindingServiceImpl.java:413)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.security.Security.runAs(Security.java:61)
at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl.sendMessage(JCATransportInboundOperationBindingServiceImpl.java:413)
at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl.invokeOneWay(JCATransportInboundOperationBindingServiceImpl.java:126)
at com.bea.wli.sb.transports.jca.binding.JCAInboundRequestListener.post(JCAInboundRequestListener.java:39)
at oracle.tip.adapter.sa.impl.inbound.JCAInboundListenerImpl.onMessage(JCAInboundListenerImpl.java:170)
at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:502)
at oracle.tip.adapter.file.inbound.Publisher.onMessageDelegate(Publisher.java:493)
at oracle.tip.adapter.file.inbound.Publisher.publishMessage(Publisher.java:419)
at oracle.tip.adapter.file.inbound.InboundTranslatorDelegate.xlate(InboundTranslatorDelegate.java:484)
at oracle.tip.adapter.file.inbound.InboundTranslatorDelegate.doXlate(InboundTranslatorDelegate.java:121)
at oracle.tip.adapter.file.inbound.ProcessorDelegate.doXlate(ProcessorDelegate.java:388)
at oracle.tip.adapter.file.inbound.ProcessorDelegate.process(ProcessorDelegate.java:174)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:349)
at weblogic.work.ContextWrap.run(ContextWrap.java:41)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/wsdlPathAndName [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
No Data to process.
File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content ; nested exception is:
BINDING.JCA-11007
No Data to process.
No Data to process.
File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content Please make sure that the file exists in the specified directory.
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:259)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
... 56 more
Caused by: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/wsdlPathAndName [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
No Data to process.
File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content ; nested exception is:
BINDING.JCA-11007
No Data to process.
No Data to process.
File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content Please make sure that the file exists in the specified directory.
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:662)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:353)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:312)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:350)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:253)
... 57 more
Caused by: BINDING.JCA-11007
No Data to process.
No Data to process.
File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content Please make sure that the file exists in the specified directory.
at oracle.tip.adapter.file.outbound.FileReader.readFile(FileReader.java:277)
at oracle.tip.adapter.file.outbound.FileReader.executeFileRead(FileReader.java:181)
at oracle.tip.adapter.file.outbound.FileInteraction.executeFileRead(FileInteraction.java:331)
at oracle.tip.adapter.file.outbound.FileInteraction.execute(FileInteraction.java:395)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:529)
... 61 more
Edited by: 842347 on Jul 6, 2011 3:11 AM

I face the same issue and I have given all permissions to the folder for OS user.
Because of this error my server is not starting up . Is there any way I can undeploy this composite to get my server running.
I cant do this from EM because SOA server is failing to start up.
I have tried removing it from $DOMAIN_HOME/deployed-composites but still when i try restarting the soa server the composite comes up there. Do we need to delete the entry some where else too. Kindly help.
Thanks,
Sri.

Using relative path for in file/ftp adapter

Hi All,
How to have a relative path for file/ ftp adapter's inbound/outbound operation?
Example: Consider $ORA_HOME = /home/oracle --> This environment variable can be different on different machines
i want to drop a file in to $ORA_HOME/folder1/folder2 (Or poll for a file).
<partnerLinkBinding name="FTP">
<property name="wsdlLocation">FTP.wsdl</property>
<property name="out_dir" type="LogicalDirectory">What do i write here???</property>
<property name="retryInterval">60</property>
</partnerLinkBinding>
if i cant configure this in partner link section or in activation agent sction, how else do i achieve this?
i am using 10.1.3.* version.
Thanks in advance.
Roshan.

You can achive it using the deployment scripts if the directory is changing on the basis of the environment
If you want to change at run time than you can use the jca properties to set using the variables at runtime.
Regards,
Ajay

Issue while polling in clustered environment.

Hi All,
I am using a polling adapter which polls records from two database tables. I have set Database rows per transaction as 10 and polling interval as 30 secs. Our servers are running in clustered mode.
The issue is that, when the rows are picked by node 1 , without waiting for the polling interval node 2 picks up the next set of rows from database.
As per our requirement, rows should be polled according to the value of Database rows per transaction size. Then adapter should wait for the polling interval and then pick up the next set of rows (in the clustered environment only). Can it be achieved using custom SQL or some java code. If anyone has tried it please help me.
Thanks in advance.

See this is misconception that both nodes picks the data in turn one by one.
It totally depends on the availability of the nodes. This is how a typical active active cluster should behave.
Both nodes will show similar set of instances as they are pointing to same soa_infra schema.
We can not differentiate by checking EM that which node actually processed a particular instances.
I would like to know how are you sure that both nodes are picking file one by one without waiting other one to complete its job.
I have experience with Active active cluster with uses of DB Adapter in many scenarios. But I never observed this behavior.
Probably by understanding your applications architecture, answer to your problem can be found.
Thanks,
Ashu

FTP Adapter on OSB - how to specify logical directory path

I am using the ftp adapter on osb 11g (Oracle Service Bus Version: [Oracle Service Bus Server Side Dependencies 11.1 Thu Aug 19 02:10:08 PDT 2010 ] Oracle Weblogic Server Version: [WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 ])
I defined the ftp adapter using jdev and imported the jca artifacts into osb.
I created a business service using jca adapter to put the file to the ftp server.
The problem is the write directory on the ftp server is different for each environment - DEV, QA, PROD.
I used a physical directory specification when defining the adapter in JDEV because it wasn't clear from the help how i would override a logical directory during deployment to osb (it is clear if deploying to soa suite).
Is there a way to override this dynamically override this directory at runtime. Or even better a way to override during deployment time?

You do it either way....
Import the SBConfig jar into the sbconsole and change the value in the JCA file
or
Re: Customizing JCA FTP Adapter properties in OSB

10.1.3.4 - ESB FTP adapter not processing the files in the input directory

I created a process that reads from a logical inputDir. I migrated the ESB service to another box and created the same adapter connection etc. however nothing really happens in this new environment. In the opmn.log i see the following statements and no other info.
2008-12-16 14:03:41,994> <INFO> <collaxa> <ServerManager::loadProcesses> Done loading processes for all domains
<AdapterFramework::Inbound> Instantiating inbound part of Adapter Framework instance: OraESB
<AdapterFramework::Inbound> Adapter Framework instance: OraESB - endpointActivation for portType=Get_ptt, operation=Get
<AdapterFramework::Inbound> Creating new instance of Resource Adapter oracle.tip.adapter.ftp.FTPResourceAdapter
<AdapterFramework::Inbound> Adapter Framework instance: OraESB - starting Resource Adapter oracle.tip.adapter.ftp.FTPResourceAdapter
<FTP Adapter::Inbound> File/FTP Adapter started successfully.
<FTP Adapter::Inbound> ENDPOINT ACTIVATION CALLED IN FTP ADAPTER
<AdapterFramework::Inbound> Adapter Framework instance: OraESB - successfully completed endpointActivation for portType=Get_ptt, operation=Get
<FTP Adapter::Inbound> Connection Created
<FTP Adapter::Inbound> Connection Created
The last message "Connection Created" keeps repeating, but no processing occurs. I tried increasing all the loggers to finest. but still nothing happens.
any idea how to troubleshoot this ? the only difference in the environment is that the new environment has 10.1.3.4 MLR2 and the first one is just plain 10.1.3.4

Make sure that you modified the oc4j-ra.xml file in the FtpAdapter directory and have put the correct hostname and username and password. The directory structure looks like this //some-directory/oc4j_soa/application-deployments/default/FtpAdapter/oc4j-ra.xml.

Duplicate File issue using FTP adapter - BizTalk 2010

Hi We encountered an Issue of picking Duplicate files in BizTalk 2010 from the FTP Location. Need your assistance on this.
Mainframe sends multiple files a 0 KB file to FTP and BizTalk picks during a particular service window using FTP Adapter.
Receive Location has a pipeline component which decodes the MF file(EBCDICRow format).
Send Port transmits the file which is decoded in the Receive location. There is no mapping or orchestration involved.
When 2 files are placed in FTP Location. BizTalk Transmits the files successfully
No suspended messages in BizTalk but we see below error in event log. we tried reproduce the issue but no luck.
Host Instance running FTP Location is Clustered
There was a failure executing the receive pipeline: "XXXX.XX.Pipelines.Receive_XXX_TransactionsMC_passthru, XXX.XX.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=c2d1f476d5c2f97d"
Source: "EbcdicRowDeCode" Receive Port: "XXX.XX.MCSTransactionsMC" URI: "ftp://XXXXXXXX:21/'XXXX'/MCSDT.DEFKOP.R001.D*.T*" Reason: Unable to cast object of type 'Microsoft.BizTalk.Streaming.BasicStreamWrapper' to type 'XXX.BizTalk.Pipeline.Components.Streams.V3.VirtualStream
MF Puts below Files at FTP Location
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T002100
BizTalk Picks ( at specified Service window) and Transmits as
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T002100
Regards
-Sri

Hi Sri,
There could be two reason for such a behavior:
1) Using Non-Clustered Hosts: It is always recommended to use the clustered host for FTP adapter. Because FTP don't allow
any locking mechanism on the files so in case of non-clustered with multiple host instances you might receive same file multiple times through different host instances.
2) If the original document is still being written to the FTP server by the host application, the FTP adapter cannot
delete the document and will retrieve another copy of the document at the next polling interval that is configured for the receive location. This behavior causes document duplication to occur.
Workaround could be:
Configure the host application to write to a temporary folder on the same hard disk as the public FTP folder and to periodically move the contents of the temporary folder
to the FTP folder. The temporary folder should be on the same hard disk as the public FTP folder to make sure that the move operation is atomic. An atomic operation is an operation that is functionally indivisible. If you write data to the public FTP folder
by using the BizTalk Server FTP adapter, you can do this by specifying a Temporary Folder property in the FTP Transport Properties dialog box when you configure a send port. If you specify a Temporary Folder property, make sure that this folder is on the same
physical disk as the public FTP folder.
Configure the FTP receive location to operate within a service window when the host application is not writing data to the FTP server. You can specify the service window
when you configure the receive location properties.
Refer: Known Issues with the FTP
Adapter
Rachit
Please mark as answer or vote as helpful if my reply does

FTP Adapter configuration for UNIX env

Hi
Can anyone help in setting up an FTP adapter which will just read files from the given location in a UNIX environment. I have done the same in windows environment with FILEZILLA and it works fine. Now i need to implement the same in UNIX environment. So i have the composite ready. All i need is what settings need to be made in UNIX env..??
Edited by: 944160 on Dec 20, 2012 1:21 AM

Resolved

FTP Adapter On in a Clustered Environment

Similar Messages

Maybe you are looking for