Function in a view where the function owner is different that the view

we have a function that is in schema b which is used by a view in schema a. I am able to see the data in the view, but when the schema a user selects for the view he gets a view not found message. The view owner has execute on the function, and the function owner has full rights on the tables in the view?

In your scenario, it user "A" wants to select from the view, he should not receive any error like "table or view does not exist".
If you receive this error shilw connected to user "B", you must grant "SELECT ON view_name" privilege to the user "B".
Please use USER_TAB_PRIVS to see if you have SELECT privileges on this view. Please also p[aste exact error message
Thaks
Salman

Similar Messages

HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works

Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help

Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

How can I customize Firefox to eliminate the function where the browser grays out the window in order to highlight a question box?

Ever since I upgraded from Firefox 3 (which I waited so long to do because I couldn't customize the newer Firefox the way I wanted to) to Firefox 14.0.1, I have had a problem.
I guess that one of the websites I visit is trying to imitate Windows, where the background becomes grayed out whenever it wants you to concentrate on a response box. So when I am on a third-party email site (Inbox.com), and delete a message, when the message box pops up to ask me if I really want to delete the message, the background becomes grayed out while the response box is displayed. This never happened on that site when I used Firefox 3, and I would like to prevent this from happening.
I have tried to manage this with an add-on (Element Hiding Helper for Adblock Plus), but it won't allow me to select the grayed out part of the screen the way it does with unsolicited "pop-ups".
Is there a Firefox setting or an add-on I can use to keep the background from becoming "grayed out"?
Thank you

Thanks for responding.
It isn't that there is anything grayed out that I need to see, just that it would be a preference of mine to not have the graying occur. It didn't happen in build 3.
It's just that something about the graying strikes me as "bossy", and since it's my computer (and I should be able to control it as I please), it irritates me.
To answer your other post, I don't want to upgrade to build 20. Actually, I would rather return to 3, just to keep things like this from happening.
In version 3, I also had more control over the autocomplete function on some websites. I'm not talking about the autocomplete that fills in forms or passwords, but the autocomplete that occurs when you type in a search box on a website. I had eliminated almost all occurances of autocomplete by using various different things, until I got Firefox 14. Now I have to put up with it on a few sites, including one that I use often.
Every time I get a newer version of Firefox, I have to accept more and more things that I don't want to have in my browser.

Identify tables from where the function module extracts data for the ES

Hi All,
For the datasource, 0CRM_SALES_ORDER_I in the CRM system, we need to add a new field (in the table level). This datasource's extraction type is 'F1 - function module'. Is the extractor itself is this function module? If it is a sepeate FM, where can we find the function module name used for this datasource?
We need to identify the tables from where the fields in this datasource fetch data from. Where can we find this information?
To be specific, in the sales order in tcode crmd_order, if we goto conditions tab and create a new condition, in what table this will get stored?
Thank you in advance,
Hari

Ignore this thread! there is another thread I have created for the same problem.
I created only one; wonder how it became two!!

I cannot close or import or any function to iphoto. I have been getting the same message for many days "Photos are being imported to the photo library. Please wait for import to complete." I do not know where the photos would be importing from.

I cannot close or import or any function to iphoto. I have been getting the same message for many days "Photos are being imported to the photo library. Please wait for import to complete." I do not know where the photos would be importing from. How do I get it to proceed?

After Force Quitting, as LarryHN recommended,
Select the iPhoto Library in the Finder. By default it is in your Pictures folder.
Ctrl-click or right-click the iPhoto lIbrary. Select "Show package contents" from the panel, that will pop up.
Look for a folder named "Importing" or "Import". Remove this folder, but don't touch anything else.
Then launch iPhoto again.
If iPhoto now is working again, check the folder you removed, if there are any photos that you want to keep and save them.

When I go to Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Define if users or functional owner can self-approve their own requests-OIM

I have a scenario where in if a user replaces his manager as proxy and makes a request for a resource, the approval task triggered goes to the user itself and the user can approve it. I want to deactivate this functionality.
I was told that since BP12 has been applied, OIM allows us to define if users or functional owner can self-approve their own requests. Is this possible and if yes then how to go about it??
Thanks in advance.

Per BP11 for OIM 10g documentation:
9649346 A user could approve or update the user's own request. This feature could not be disabled. From this release onward, this feature can be enabled or disabled depending on your requirement. See Section 3.10, "Using the XL.AllowBeneficiaryToApprove System Property" for information about implementing the fix for this item.>
There is also this in BP11:
9271449 Requesters could reassign approval tasks to themselves. See Section 3.9, "Using the XL.RequesterCanBeApprover System Property" for information about implementing the fix for this item.>
System configuration variables in 10g are in the design console. In 11g, they are in the web console.
-Kevin

Running the TSQCallback function in a different thread?

Hi,
I am looking at the example code directPtrAccess.c where the TSQcallback function is set to be executed in the same thread that generates the data. However, in application, I would like to run the call back function in a separate thread.
I would greatly appreciate if some one can clarify whether this is possible and if yes how it should be done?
Thanks!
Sripad

In that example the TSQ callback is not executed in the generation thread: it is executed in the main thread instead.
The generation thread is unknown (the thread ID is not saved in any variable) but is it different from the main thread, which is the one that handles the user interface.
As you can see, the TSQ callbacl is installed receiving CmtGetCurrentThreadID() in Callback Thread ID; that is to say, it receives the ID of the main thread and executes there.This is a very common situation, where generation / acquisition of data and other tasks are executed in a separate thread and presentation of data and UI handling are executed in the main thread.
If you had previously created a different thread and saved its ID, you could pass it in this parameter and obtain the callback to run in that thread.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

I think I finished installing Mountain Lion, and am at the "log in" page with my name and the Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro

I think I finished installing Mountain Lion, and am at the "log in" page with the Mountain Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro, which is said to have the capabilities of running Mountain Lion.

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now.

HT4913 i am trying to get my computer and my wifes computer on my itunes match. i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please

i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please explain. is this going to screw my wifes account up?

If you both have seperate iTunes Store accounts then basically, yes, it is going "screw up" your wife's account.
iTunes Match is designed as a single-user service which is associated with one and only one iTunes Store account ID. If you have subscribed on your account and want to activate the service on another computer that is already signed in with an account the present account must be signed out and then iTunes signed into your account. This means the other computer will have complete access to your account and will only be able to make purchases on your account. iTM is not designed to be signed in and out at will. If she has apps purchased with her iTunes Store account they will not be able to be updated.

I have a Mac Air. When I go to view any video online (youtube for example)and click on a video, I get the space where the video should play but there is just a black screen and no play button and the video does not start. Any ideas?

I have a Mac Air. When I go to view video online (youtube for example), the screen for the video comes up with a black square space where the video should play. But there is no pay button and the vidoe never starts playing. Any suggestions would be appreciated.

Shockwave and Flash are not the same. Try installing a Flash plug-in. Here's the latest: Adobe Flash Player 11.2.202.183

Is there a similar function in Edge Animate that is similar to the draw path function in After Effects?

Is there a similar function in Edge Animate that is similar to the draw path function in After Effects?

No, I'm afraid not. However, you can drop a clip from in to out into the timeline and the hit CMD+R and grab the end, changing the length of the clip to fit in the space that you need by speeding up the clip.
Hope that helps.
Andy

Function module or BAPI that is used to update the records in RBKP table.

Hello All,
Can anybody please give me the name of any Function module or BAPI that is used to update the records in RBKP table.
Please help me
I need to change the fiscal year in RBKP table
Thanks in Advance,
Regards,
LIJO

Hi,
You can use the BAPIs,
BAPI_ACC_INVOICE_RECEIPT_CHECK Accounting: Check Invoice Receipt (OAG: LOAD PAYABLE)
BAPI_ACC_INVOICE_RECEIPT_POST Accounting: Post Invoice Receipt (OAG: LOAD PAYABLE)
Hope this helps.
Regards,
Renjith Michael.

My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work?

My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work? I discovered that Java quits immediately. Could that be the cause? If so, how do I fix it?

My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work? I discovered that Java quits immediately. Could that be the cause? If so, how do I fix it?

Function in a view where the function owner is different that the view

Similar Messages

Maybe you are looking for