Function Module CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH'

Hello All,
While using CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH' to download to Unix file in GLD (Version 4.5b) the F.M is working fine, but in KLD(Version ECC 6.0) CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH' is not working & the error message is displayed saying incomplete filename.
Could you let me know any alternate Function Module/ Method in this regard.
Thanks

Hi,
In ECC6 also Its Working fine only.
1. Go to SE37 -> Enter FM Name -> Test(F8).
2. Give any file path and test it.
Thanks,
Reward If Helpful.

Similar Messages

Dynamic function module call

Hi,
I need to call few function modules dynamically.The exporting and importing parameters are also known only at run time.
Can somebody help me out in this regard,
Thanks and regards,
Archna

hi ,
Create Function module according to your requirment and call the same
such as
Create functi0n module   where you are passing PLant runtime   and get data related to Plant
write code in function according to requirment .
FUNCTION zrfc_test.
""Local interface:
*" IMPORTING
*"     VALUE(ZWERKS) TYPE MARC-WERKS OPTIONAL
*" EXPORTING
*"     VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
*" TABLES
*"      ZIT_DATA STRUCTURE MARC
IF zwerks IS NOT INITIAL.
    SELECT *
      FROM marc
      INTO CORRESPONDING FIELDS OF TABLE zit_data
     WHERE werks = zwerks .
ELSE.
    SELECT *
      FROM marc
      INTO CORRESPONDING FIELDS OF TABLE zit_data.
ENDIF.
IF sy-subrc = 0 .
    MESSAGE ' Selected ' TYPE 'I' .
ENDIF.
ENDFUNCTION.
Suppose at runtime you get Plant 7100
types : begin of w_marc .
         include structure marc .
types : end of w_marc .
data : it_data type standard table of w_marc with header line .
p_plant = 7100 .
Call to function module
CALL FUNCTION 'ZRFC_TEST'
EXPORTING
   ZWERKS         = 'p_plant
IMPORTING
RETURN         =
TABLES
    zit_data       = it_data .
You will get result in it_data .
Note : if you don't know how to create Function Module then search on SDN you will get lots of Forum .
Regards
Deepak.

Function module call with destination

Hi,
how can check if a function module call with destination works or not ?
How can I debug.
What can be the reason if it is not calles
regards
ertas

* to chcek the rfc Destination By pass RFC destination name and Connection Type..
RFC_CHECK_DESTINATION
or
RFC_CHECK_DESTINATION_ID
or
You can use this FM RFC_VERIFY_DESTINATION if your release is greater than 4.6C.
Check this sample code from Craig Cmehil's weblog.
CALL FUNCTION 'RFC_VERIFY_DESTINATION'
EXPORTING
    DESTINATION = TMP
        TIMEOUT = 10
EXCEPTIONS
    INTERNAL_FAILURE           = 1
    TIMEOUT                    = 2
    DEST_COMMUNICATION_FAILURE = 3
    DEST_SYSTEM_FAILURE        = 4
    UPDATE_FAILURE             = 5
    NO_UPDATE_AUTHORITY        = 6
    OTHERS                     = 7.
IF SY-SUBRC EQ '0'.
    "* Do code here
ENDIF.
Prabhu

Rfc function module call error

Hi Abaper,
I'm doing upgrade from 4.7 to ecc 6.0 currently and encounter problem in one of the rfc function module that we used. I've tested the connection to destination using sm59 and the connection is successful.
As an information, in the rfc setting, the target system is not Unicode system.
When I test using se37 and put the rfc destination in my function module call, I always encountered system_error exception. There's no issue with this rfc call before in 4.7 system.
Please help me on this. Thank you.
Edited by: Abraham Bukit on Sep 3, 2008 2:36 AM

Hi,
I had the same issue in the past and solved it in the following way.
If the destination system is not Unicode please try to set the password for the communication user set in SM59 using only upper-case characters and taking into account that the password shouldn't be longer than 8 characters.
Hope this will help.

Problem with function module calling

Hi,
I have two questions here
i have a function moduel 'Z_GET_MATL_BALANCE'
in my code it called in the below said way
CALL FUNCTION 'Z_GET_MATL_BALANCE'
    DESTINATION 'NONE'
    STARTING NEW TASK 'A'
    PERFORMING f_back ON END OF TASK
    EXPORTING
      ref_dte    = s_datum-low
      str_dte    = s_datum-high
      end_dte    = s_datum-high
      i_werks    = p_werks
      i_past     = 'X'
      i_future   = 'X'
      verselem   = p_mrpver
      plscn      = p_scenar
      r_outrec   = r_outrec
      supstk     = p_supstk
      days_ahead = w_days_ahead
      shipnt     = p_shipnt
    TABLES
      mat_bals   = w_zmat_bals_a
      i_zdatum   = i_datum
      mat_movmts = w_mat_movmts_a
      mat_ship   = i_mat_ship_a.
IF sy-subrc NE 0.
    MESSAGE e005(ZMIM) WITH
   text-009 text-166 text-054 sy-subrc.
ENDIF.
FORM f_back USING task.
CASE task.
    WHEN 'A' .
      RECEIVE RESULTS FROM FUNCTION 'Z_GET_MATL_BALANCE'
     TABLES
          mat_bals                     = w_zmat_bals_a
          mat_movmts                   = w_mat_movmts_a
          mat_ship                     = i_mat_ship_a
       EXCEPTIONS
            call_material_lesen_fail     = 1
            call_t450n_fail              = 2
            call_t399d_fail              = 3
            call_aufbauen_mdpsx_fail     = 4
            call_mdezx_aufbauen_fail     = 5
            call_t001w_fail              = 6
            call_zmrpelem_failed         = 7
            call_aufbauen_mdpsx_sim_fail = 8
            OTHERS                       = 9.
      IF SY-SUBRC NE 0.
       RET_CODE1 = SY-SUBRC.
      ENDIF.
now my first question is what is the difference between function modules calling normally and in the above said way
and the second question is
under tables parameter i have four internal tables defined where as while calling the same function module using recive results i have three internal tables. is this correct?
i am asking this because i am getting an error message while using this funciton module
please do not give generic answers, all the helpful answers will get a def reward

Call function starting new task is used to make Asynchronus RFC Call. In this case your function module will be called in a NEW SESSION and it will exceute independently from the Main program which is calling the FM. Also, the main program will continue its own processing and it will not wait for the RFC FM to complete.
Its not mandatory to have all the TABLES parameters in the RETURN Perform (..Receive results from ...)

Need to track Function modules called when executing a transaction

Hi All,
Is there a way through which i can track function modules called, while executing a Transaction. Kindly provide pointers to it.
Thanks in advance.
Regards,
Navin.

Goto SE80 Transaction and use Program name for corresponding Transaction Use Find operation like Call Function .. then you will get list of FM ..
There is no other option .
reward Points if it is helpful
Thanks
Seshu

Regarding Function module call

Hi Guru s
Can any body explain how many Function modules are stored in One function group.
And What happen when I call 1 function module in a F.Group.
Thanks in advance,
Kumar.

Hi,
Function group can be defined it as collection of Function
modules. This Function groups are presents in the Packages
where we can create in the SE38. So,that all packages are
consists in the Function Groups.All function groups are
consists Function Modules.This function modules are created
at enhancements/Exists.
A function group can hav any no. of FM's.
there is no restriction.
reward if useful
thanks and regards
suma sailaja

Update sap table using a function module call by php code

Hello,
I m trying to update the table VBAP using a function module ZZ_SET_DISTANCE call by a php code.
But I have this problem:
the saprfc seems to work well but when I look to the table VBAP the fields have not been update.
I tried the function module in debug mode and it work good. The fields are update.
I also handle the saprfc call function and the return SAPRFC_OK
This are the function module ZZ_SET_DISTANCE, and the php code
//PHP CODE
$fce = saprfc_function_discover($sap,"ZZ_SET_DISTANCE");
              if (! $fce ) {echo "Echec d'ouverture du module fonction "; exit;}
               saprfc_import ($fce,"COMMANDE", '0000001998');
               saprfc_table_init($fce,"TBLE_CMDE");
                    $val=array();
                    $val['NUM_POST']='000030';
                    $val['HN_EXP']='';
                    $val['ST_EXP']='';
                    $val['PC_EXP']='';
                    $val['CI_EXP']='';
                    $val['CO_EXP']='';
                    $val['HN_REC']='';
                    $val['ST_REC']='';
                    $val['PC_REC']='';
                    $val['CI_REC']='';
                    $val['CO_REC']='';
                    $val['DIST']='popo';
                    saprfc_table_append ($fce,"TBLE_CMDE", $val);
             $rfc_rc = saprfc_call_and_receive ($fce);
             echo "\n".$rfc_rc;
             if ($rfc_rc != SAPRFC_OK) { if ($sap == SAPRFC_EXCEPTION ) echo ("Exception raised: ".saprfc_exception($fce)); else echo (saprfc_error($fce)); }else{echo '/execution de la function ;}
             saprfc_function_free($fce);
//FUNCTION MODULE ZZ_SET_DISTANCE
FUNCTION ZZ_SET_DISTANCE.
""Local Interface:
*" IMPORTING
*"     VALUE(COMMANDE) TYPE VBELN
*" TABLES
*"      TBLE_CMDE STRUCTURE ZADD_COM_LOXAN
DATA : NUMC TYPE VBELN.
NUMC = COMMANDE .
WHILE STRLEN( NUMC ) < 10 .
CONCATENATE '0' NUMC INTO NUMC .
ENDWHILE .
DATA tble_addrcomm LIKE LINE OF TBLE_CMDE .
LOOP AT TBLE_CMDE INTO tble_addrcomm.
DATA : NUMP TYPE POSNR.
NUMP = tble_addrcomm-NUM_POST.
WHILE STRLEN( NUMP ) < 6 .
CONCATENATE '0' NUMP INTO NUMP .
ENDWHILE .
UPDATE VBAP SET ARKTX = tble_addrcomm-DIST
WHERE VBELN EQ COMMANDE
AND POSNR EQ NUMP.
ENDLOOP.
ENDFUNCTION.
Is anybody can help me?
thank.

Marie, create a Blog please, about more details for dummies....
1) how to connect to sap system?
2) you run the php code where? in a webserver or where?
3) wich is the url for run the FM: ZZ_SET_DISTANCE
4) you placed some dlls files on the web server?
please is interesting this...
Thanks

How to Developed user defined functions to call function modules in SAP R/3

how to Develope user defined functions to call function modules in SAP R/3 system

Hello Raja,
Go through this V.imp Link...
http://download.oracle.com/docs/cd/B10464_05/integrate.904/b10408/rfc.htm
Steps to crate FM..
Follow these steps..
Go to the T: code SE37
First You Create Function Group
On That u specify
Function Group Name..............
Short Text..............................
save...
Go to SE 37
Specify the Function Module Name: Eg: Z_Bapi_Materialmaster
Short Text.......
Save...
Next Go to Attributes..
Select Radio button : Remote enabled model
Go to Parameters..
Click Import...
Give Parameter Type Associate type S.t
next Click Export...
Give Parameter Type Associate type S.t
Next Click Tables Button..
Specify tables..
Next click source code button..
Write Source code here..
Eg : Select statements Etc..
Finally we should be select the Radio button Enable remorely
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=39728
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/bapi%2bstep%2bby%2bstep
Re: User Defined Functions Tutorials
Hope this information is useful to you..
Thanks ,
Satya Kumar..

How 2 Develope user defined functions to call function modules in R/3 syst

How to Develope user defined functions to call function modules in SAP R/3 system....in xi

HIi,
If those function modules are RFC enabled then we can call those function module from user defined functions. Please see below link
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Reward points if helpful.
Thanks,
Vijay Kumar T,

Can a function module call another function module

Can a function module call another function module:-
within the same function group
(ii) within different function groups

Hi,
We can call function from another function. If there is a function which is like a calculator and all the operations are from different functions then we have to call the functions from the calculator function for different functions.
If all the function are from same function group, Then the data is globally available to all the functions with in the group.
Otherwise we have to declare the data definitions for each of the functions if they are in different function groups.
Yes it is possible to call a function module from another function module:-
within the same function group
(ii) within different function groups
Reward.

Idoc - Error Status 51: Incorrect function module called up

Hi,
In the receiver system for the custom message type, I got this error.
Incorrect function module called up
Can any one pls help me to solve this one.
Regards,
Bala Raja

Hi Bala,
     Check the inbound function module attached to process code in receiving system. Generally in every inbound function module first check is coded for checking message type or for checking funciton module like below.In the receiving system go to WE20 and then select the partner and select inbound message type. in that double click on assigned process code.then you have to double click on displayed FM. In that fm check first few lines. You will find this error message.
LOOP AT IDOC_CONTRL.
    IF IDOC_CONTRL-IDOCTP(6) <> 'DESADV'.
      MESSAGE ID 'E0' TYPE 'E' NUMBER '029'
      WITH IDOC_CONTRL-IDOCTP ' ' 'IDOC_INPUT_DESADV'
      RAISING WF_ERROR_PROCESS.
    ENDIF.
ENDLOOP.
Thanks & Regards,
Kalyan.

Function modules and function groups

Hi alll
Can anybody explain me abt function module and function groups...please
Thanks and Regards
vijaya

<b>Function groups</b> are containers for function modules. You cannot execute a function group. When you call an function module, the system loads the whole of its function group into the internal session of the calling program (if it has not already been loaded).
The name of a function group can be up to 26 characters long. This is used by the system to create the components of the group (main program and corresponding include programs). When you create a function group or
function module in the Function Builder [Ext.] , the main program and include programs are generated automatically.
When you create a new function group, the system automatically creates a main program containing two includes. Like any other programs and includes, you can display them in the Repository Browser.
The name of the main program is assigned by the system. This is made up of the prefix SAPL followed by the function group name. For example, the main program for function group SXXX is called SAPLSXXX.
The names of the include files begin with L followed by the name of the function group, and conclude with UXX ( or TOP for the TOP include). The TOP include contains global data declarations that are used by all of the function modules in the function group. The other include file within the main program is used to hold the function modules within the group.
You cannot declare a COMMON PART in a function group. Function groups have their own table work areas (TABLES). Function groups encapsulate data.
All of the function modules in a function group can access the global data of the group. For this
reason, you should place all function modules that use the same data in a single function group.
For example, if you have a set of function modules that all use the same internal table, you could
place them in a function group containing the table definition in its global data.
Like executable programs (type 1) and module pools (type M), function groups can contain screens, selection screens, and lists. User input is processed either in dialog modules or in the corresponding event blocks in the main program of the function group. There are special include programs in which you can write this code. In this way, you can use function groups to
encapsulate single screens or screen sequences.
For function module, have a look at
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
I hope it helps.
Best Regards,
Vibha

How to delete a function module from function group

I want delete a function module form function group.. iam unable tp do that , when i dlete that FM , it is saying " ralated objects are locked in another request"
what to in this case?
Pls anybody help me in this...
Regards,
pandu.

Hi,
go to se80
type the function group and press enter
select the function module right click and delete.....
before that see the request number the FM is attached and delete that from that request and try deleting it
Reward if usefull

Getting values from a function module called in a WDA method

Friends,
I am trying to execute a function module from WDA.
I have created a service call for the function module. The function module takes values from the user, looks up the corresponding values of another field and returns the values in an internal table.
I am using the "Method Call in Used Controller" of WD Code wizard to call the function module.
When the event handler method containing the call to the function module is executed, nothing happens.
I am not sure how to pass values to the function module and to get the return values from the function module.
I am new to using function modules from WDA. Please help me out.
Thanks and Regards.

Rashmi,
Is the function module intended to collect input data from the UI and process it? - Yes
If yes, then the input (importing parameter) to the Function Module is a table of values (which should be ideally from the context mapped to the Table UI Element). - The importing parameter is a single value NOT a table and is mapped to the view context.
Now this table UI Element is bound to the view controller context , which in turn is mapped to the component controller context. And you are indeed being able to read the value of this internal table in the component controller method where the function module is being called by means of get_static_attributes_table (Is this right? - Yes, I am able to read the table of values that is passed from the component controller view to form view context by using get_static_attributes_table.
Or are you being able to read it in the event handler method of the view controller and not being able to read it in the component controller method) -
The function module takes a single value as import parameter and returns a table of values as return value.
It works fine when no importing parameter is being used and returns the table of values that is getting passed from component controller context to form view context when i am able to read it using get_static_attributes_table.
Now the question is: how to pass the import parameter value to the function module. I assumed since the importing parameter is a context node (like the return values are), i should set the value ( captured when the user enters the value in the form) to the importing parameter context attribute using set_attribute method. Since it is mapped to the component controller context, i assumed it will get passed and the method will take it as input parameter.
Let me know if my assumptions are correct regarding passing the import parameters and what is missing here.
Thanks and Regards.

Function Module CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH'

Similar Messages

Maybe you are looking for