Function Module query

In my FM i call another FM which creates a entry in kna1 and knvp
i checked tht FM in that if
entry is not created in kna1 it gives a return code ot equal to 0
i want that in my fm when i run it
if it doesnt creates a kna1 entry it should pass a return code
how can i do it?

If the called function is returning value 0 when it saves data into table then after call to that function module if u just check value of sy-subrc i think it should work fine.
-Pranjali

Similar Messages

Generic DataSource on Function Module - Query

Hi All,
We have a requirement wherin we have to pull data from MARM (Material UOM fields) table. This table has some 1,130,000 records. Since this table doesn't have a Last Changed on or Created on field we are not able to create a Generic Delta on the table itself.
We have come to know that in MM02, we can change the Unit of Measure fields for material. When we update in MM02, both MARA and MARM table gets changed. MARA will be updated with the last changed date.
So we are thinking of creating a Generic DataSource on Function module so that we can perform the delta on Last changed or Created on field of MARA.
I have a doubt about creating the function module. How should we achieve the initial load (Getting all the material and it's UOM to BW) and then Delta loads through the function module?
Does the first load needs to be or should be a full load?
If someone can tell me the steps that should be followed, it would be very helpful
Please let me know your suggesstion.
Regards,
Vivek Das Gupta

Hi
Could u try creating a view based Datasource.
Also u can do a full load in parallel by creating 4-5 Infopackages. After which a Init without data transfer can be done.
Hope this helps.
Reg
Aparna

Can we call a function module in ADHOC query

Hi
Can we call a function module in ADHOC query if yes how.
Also we ned to know how to call a function module in SAP query.
An early responce is appreciated.
Thanks and best regards
Rajeev

Okay as far as I understand your aim is:
To fill a field in the output list with a value that is based on the current line information and calculated by a function module
So go to SQ02 and create an additional field in the InfoSet.
You can refer in the coding to the technical names you can see in the left tree window like P0000-PERNR.
More information is avaiable in the Help part look for additional field in SQ02.
Regards,
Michael

Query ID in Virtual Cube with services-Function module

Hi,
I am using virtual cube with services linked to a function module.
The function module has fixed parameters(such as infoprovider name). None of these parameters consists of query information such as query ID OR queryname .
Do any one know how to determine query which was executed this function module?
Best Regards,
Anil

Hi Claudio,
I never implemented Virtual InfoCube with services with a FM, but I know there is a couple of How To Documents about named:
- How to Reporting from External Data via Virtual InfoProvider
-How to Implement a Virtual InfoCube with Services
both with some code samples: did you read it?
Hope it helps
GFV

Linking a function module in Bex query

Hi,How do I use a function module in a Bex query?
Req is: use to get the diff b/w 2 date fields only if both the value are present otherwise leave the result column blank.
Ex:
Date1, date2, No. of working days
X        Y         x-y
Blank    Y         Blank(no value to be set)
X        Blank     Blank(no value to be set)
I tried to do this in Query, but then it results in zero in the 2nd and 3rd case which is not as per my req.
Wanna try with function module DAYS_BETWEEN_TWO_DATES in the query. Steps to link this function module in a bex query wud be very helpful.
Thanks in advance.

Hi S R,
Please take a look at these threads..
Funtion Module for user exits variables in BEx Queries.
Funtion Module for user exits for variables used in BEx Queries.
SAP BW BEx Analzyer Query in ABAP
BEX Multi-Language SQL Query
cheers,
Prashanth
P.S Please mark helpful answers

Using a function module in ABAP Query

Hi All,
I want to use a function module in ABAp query in the Record Processing Section.
In the report program we click on Pattern button to inser the function module so that all the Importing and exporting parameter automatically appears.
Similarly is there any particular method of inserting a function module in ABAp Query.
Regards
Manipal Parkala

When you are doing the infoset for the query (SQ02) you can add coding by clicking the coding tab. You can chose in wich event you want your coding and there is Pattern Button for you to easy use.
If you don't want to put the code in the infoset just in the query then is not posible.
Nevertheless, I higly descourage the use of coding in queryies. If you need to insert some coding make an ALV its easier, clearer and much easier to mantain.
Hope it helps.

Function module to create query view from technical name of the query ?

Hi Experts,
I am trying to create webservice definition using function module.
In this code, I am calling function module 'RSCRMBW_REPORT' which requires query view name ( we can see this in RSCRM_BAPI) as a value for parameter i_reportuid.
For the time being I am hardcoding the value but I need to use a function module which will convert techincal name of query into query view.
Can anyone have any idea about the above requirement? Or is there any other way to solve the problem?
Thanks in advance
Shamkant
Edited by: SHAMKANT SONAWANE on Apr 7, 2009 5:38 AM

Hi,
You can use FMs CONVERSION_EXIT_GENID_INPUT and CONVERSION_EXIT_GENID_OUTPUT to get query view.
First call FM CONVERSION_EXIT_GENID_INPUT with parameter input as query technical name then it will return Output in the form of GENID .
Pass this GENID as input parameter to FM CONVERSION_EXIT_GENID_OUTPUT to get query view as output.
Eg :
Test for function group      RRI5
Function module              CONVERSION_EXIT_GENID_INPUT
Uppercase/Lowercase
Runtime:        6,652 Microseconds
Import parameters               Value
INPUT                           Y0IC_C03_Q0018_2
Export parameters               Value
OUTPUT                          4D1I916ID7TWS1CK27154WYZ8
Test for function group      RRI5
Function module              CONVERSION_EXIT_GENID_OUTPUT
Uppercase/Lowercase
Runtime:        2,818 Microseconds
Import parameters               Value
INPUT                           4D1I916ID7TWS1CK27154WYZ8
Export parameters               Value
OUTPUT                          0IC_C03/Y0IC_C03_Q0018_2
0IC_C03/Y0IC_C03_Q0018_2 is expected query view.
Hope it helps...
regards,
Raju

Function Module error in query execution

Hi SDN Gurus,
When I run this query in Dev it gives me an error: "Function Module RSD_ZK_ACCT_TEXT_GET does not exist." When I look up in SE37 in both DEV and QAS, there is no such function module though I don't get this message in QAS.
ZK_ACCT is one of our important infoobjects and is in the query.
Thanks for your help.
SAF

Hi Saf,
Try with Tcode RSRT and with the following option:
Buttom:Genrate Report.
Menù: Repair.
And then execute once again the report.
Ciao.
Riccardo.

Is there any function module to get the variables used in a query?

Hi experts
Please, do you know if is there any function module to get the variables used in a query?
Thanks and regards
Luis

Hi Srini
Yes, I have checked the tables but I need a function module
Thanks anyway!
Luis

Ad-Hoc Query Field using HR_99S_INTERVAL_BETWEEN_DATES function module

I have created an additional field in Sq02 to calculate years between two dates and am using function module HR_99S_INTERVAL_BETWEEN_DATES.
There are no syntax erros but when I run a query in Sq01 and output the field it doesn't calculate instead gives "00000" output.
The field Code in the additional field
Clear ZHR_SERVICEYRS.
DATA: V_MONTHS TYPE i.
DATA: V_YEARS TYPE i.
DATA: V_MONTHS1 TYPE char20.
DATA: V_YEARS1 TYPE char20.
CALL FUNCTION 'HR_99S_INTERVAL_BETWEEN_DATES'
EXPORTING
   BEGDA           = P0002-GBDAT
   ENDDA           = Sy-Datum
TAB_MODE        = ' '
IMPORTING
DAYS            =
C_WEEKS         =
   C_MONTHS        = V_MONTHS
   C_YEARS         = V_YEARS
WEEKS           =
MONTHS          =
YEARS           =
D_MONTHS        =
MONTH_TAB       =
V_MONTHS1 = V_MONTHS.
V_YEARS1 = V_YEARS.
CONCATENATE V_YEARS1 '.' V_MONTHS1 INTO ZHR_SERVICEYRS.
condense ZHR_SERVICEYRS.
has anybody had similar problems! Help Appreciated!

Hi Anuj,
Yes, you use Transaction Code SQ02. Find your infoset on the list - if you want to create a new infoset you can do so. If it is an existing infoset, select it and Change. On the next screen you will see all the infotypes in that infoset on the left. The fields available for Ad Hoc are on the right. Open the infotype table on the left and the field group on the right. If the field is not included in the field group all you have to do is drag and drop from the list on the left to the correct field group. If the infotype is not already in your infoset, select Edit --> Change Infotype Selection from the top menu bar. Place a check in the new infotype and then return and do the drag and drop if necessary. You will find the basic fields already moved to the field group.
You say you want information from IT0008-Basic Pay and IT1005-Planned Compensation. Problem is that if you use the standard HR logical data base, there is no link directly between a person and IT1005. IT1005 is assigned to a Position or a Job. If it is assigned to a Position, you can select the "Change Infotype Selection" action and ago to the bottom of the list to Related Objects. Here select Position and open that to find the IT1005. If the IT1005 is tied to the Job, there is no direct link. Thus, if it does not already exist, you will need to create an infoset based on the PCH logical database and object Position. Now you can link that Position to "Holder"-Person and "Described by"-Job. Again, select the infotypes and fields you want and you will be able to obtain your information via Ad Hoc Query based on that infoset.
Paul

Query : Function module

Hi every body,
I need in a query to calculate duration from 2 dates/ Times.
There is a function module to calculate a duration. How can i use it in my query.
Please guide if there is another proposition.
Thanks in advance.

You can use this SD_DATETIME_DIFFERENCE But I'm not sure if you can use it inside a SAP Query (SQ01)....I remember that there is a way to include ABAP code...But I just used SQ01 one time...
Greetings,
Blag.

Query on Function Module for conversion of text - language specific

Hi,
In my interface program i have query regarding CDHDR table.
Problem: Object Class(CDHDR-OBJECTCLAS). The technical name of the object name shall
be translated to meaningful business text
For EXample. I am getting the value for the field OBJECTCLAS is EINKBELEG shall be converted as 'Purchasing Document'
Kindly suggest me if there any standard SAP function module is available to convert the German text into English

Hi,
to pass the internal table to a tables parameter
both must be of same type
if both are of same type
u can use INT1[] = INT2[] to pass internal table value to internal table of FM
if structures are not same then
u will have to loop thru int1 and move values selectively to int2 and everytime append int2
this should sove ur prob
tc
saji

Can we call function modules in SAP query or ADHOC query

Hi ,
Can we call afunction moudule in sap query or ADHOC query ?If yes How
An early responce is greatly appreciated
Thanks and best regards
Rajeev Chhabra

Hello Rajeev Chhabra,
Yes; you can call function module in SAP Query. In InfoSet definition (SQ02), you can create additional field. In this field definition, you can add code snippet where you can function module.
However, this is not possible in Quick Viewer (SQVI) Query.
Thanks,
Venu

How to pass BI Query parameters from Function Module

Hi,
We are executing the BI queries using the Function Module "RS_VC_GET_QUERY_VIEW_DATA_FLAT" by passing the query name and the provider information.
Is there a way, to pass the filter parameter values also to the query by using this function module? I am not sure how the VC tool is using this Function Module to call the BI queries and passing the filter values.
Your help is appreciated.
Thanks
Suri

Suryanarayana,
Are you trying to execute a query in batch?. If you want to execute try to look at WRITEQUERY - which is a standard SAP program. You can execute this program directly or you can customize it completely and produce the output in .CSV file.
Hope this helps. Award points if useful.
Goodluck,
Alex (Arthur Samson)

Problem in Functional Module on BW Query

Hi,
We are working on below requirement in BW.
We have to fetch the data of BW Query via a functional module to web services. We have created a query and a functional module based on that query. To create the function module on query, we have followed the standard method suggested in SAP blog. (ie. Input parameters for Functional Module is Filters use in Query and output parameters will be Keyfigures and Char. Of the Query).
We have 0PLANT in the raw section in query. We want to fetch plant text in the Function module output. But, our problem is we are getting Plant KEY value only in the output of functional module.
0PLANT properties in query designer is set to TEXT only.
So, in short, we want to have 0PLANT Text in the function module output.
Please suggest.
Regards,
Macwan James.

Hi,
In your Function module, I hope the code is perfect. Please check your Infoobject maintenance whether text was maintained.
Regards,
Suman

Function Module query

Similar Messages

Maybe you are looking for