Function module to delete script and forms
CAn anybody pls tell me whether ther is ny function module
to delete SAPSCRIPT and SMARTFORMS
Thanks .
Hello,
You cannot transport the deletion of a single language of a Sapscript form.
Please also see SAP note 3355 about it. The deletion of a form is only transported,
if the complete form was deleted in all languages and all clients.
But what you can try to do is to run the function module DELETE_FORM
via the single test of transaction SE37. But in this case you have to
delete this form in all systems.
Regards,
David
Similar Messages
-
RFC enabled function module for insert update and delete in a Ztable..
friends..
Is there any standatd RFC enabled function module to insert , update and delete data in a custom database-table (Ztable)? if not how can we create it? plz give me the details steps..
what are the import, export parameters and how to develop and process it.. (for example: suppose fields in the table is Emp_Id, Name, Address)
Thanks and RegardsHi,
Try this code.
REPORT ZMMC071Z_RMV.
TYPE-POOLS : ABAP.
FIELD-SYMBOLS: <DYN_TABLE> TYPE STANDARD TABLE,
<DYN_WA>,
<DYN_FIELD>,
<LV_CONDI>.
DATA: DY_TABLE TYPE REF TO DATA,
DY_LINE TYPE REF TO DATA,
XFC TYPE LVC_S_FCAT,
IFC TYPE LVC_T_FCAT.
SELECTION-SCREEN BEGIN OF BLOCK F1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_TABLE LIKE DD02L-TABNAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK F1.
Evento: At Selection Screen *
START-OF-SELECTION.
PERFORM GET_STRUCTURE.
PERFORM CREATE_DYNAMIC_ITAB.
PERFORM GET_DATA.
END-OF-SELECTION.
*& Form get_structure
text
FORM GET_STRUCTURE.
DATA : IDETAILS TYPE ABAP_COMPDESCR_TAB,
XDETAILS TYPE ABAP_COMPDESCR.
DATA : REF_TABLE_DES TYPE REF TO CL_ABAP_STRUCTDESCR.
DATA VL_LENGHT(30).
Get the structure of the table.
REF_TABLE_DES ?=
CL_ABAP_TYPEDESCR=>DESCRIBE_BY_NAME( P_TABLE ).
IDETAILS[] = REF_TABLE_DES->COMPONENTS[].
LOOP AT IDETAILS INTO XDETAILS.
CLEAR XFC.
XFC-FIELDNAME = XDETAILS-NAME .
XFC-DATATYPE = XDETAILS-TYPE_KIND.
XFC-INTTYPE = XDETAILS-TYPE_KIND.
XFC-INTLEN = XDETAILS-LENGTH.
XFC-DECIMALS = XDETAILS-DECIMALS.
APPEND XFC TO IFC.
ENDLOOP.
ENDFORM. "get_structure
*& Form create_dynamic_itab
text
FORM CREATE_DYNAMIC_ITAB.
Create dynamic internal table and assign to FS
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IFC
IMPORTING
EP_TABLE = DY_TABLE.
ASSIGN DY_TABLE->* TO <DYN_TABLE>.
Create dynamic work area and assign to FS
CREATE DATA DY_LINE LIKE LINE OF <DYN_TABLE>.
ASSIGN DY_LINE->* TO <DYN_WA>.
ENDFORM. "create_dynamic_itab
*& Form get_data
text
--> p1 text
<-- p2 text
FORM GET_DATA .
*Get data from p_table into internal table <DYN_TABLE>
SELECT * INTO TABLE <DYN_TABLE>
FROM (P_TABLE)
Here you can implemente function DELETE, INSERT.
ENDFORM. " De_para -
RFC enabled function module to insert , update and delete data in a ZTABLE
friends..
Is there any standatd RFC enabled function module to insert , update and delete data in a custom database-table (Ztable)?
if not how can we create it? plz give me the details steps..
what are the import, export parameters and how to code and process it.. (for example: suppose fields in the table is Emp_Id, Name, Address. I need to develop a RFM which does the 3 tasks, insert update delete in the same RFM)
Thanks and Regardscreate a f.n mod in se37 and make it rfc enabled. ur import parameters are Emp_Id, Name, Address and TASK and u can have an export parameter like result which gives the status of the update. based on task u can insert using keyword INSERT....and update using UPDATE or MODIFY and delete using DELETE. these keyword are not compelte with syntax but need to refer the SAP documentation.
-
Regarding how to use the function module *control_form* in scripts
HI friends,
Can any one tell why and where do we use the function module control_form in scripts. Can you give me a small scenario how to use in scripts.hi satish,
by using this function module we can pass the control
commands to FORM THROUGH ABAP/4 PROGRAM.
see the following example:
TABLES: kna1.
DATA: BEGIN OF it_kna1 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1,
ort01 LIKE kna1-ort01,
land1 LIKE kna1-land1,
END OF it_kna1.
DATA:records TYPE i,
window TYPE i value 1.
select-options:s_kunnr for kna1-kunnr.
SELECT kunnr name1 ort01 land1 FROM kna1 INTO TABLE it_kna1
where kunnr in s_kunnr.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZSCRIPT4'
language = sy-langu.
LOOP AT it_kna1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ELE1'
function = 'SET'
type = 'BODY'
window = 'MAIN'.
DESCRIBE TABLE it_kna1 LINES records.
IF window lt records.
window = window + 1.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-WINDOW'
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
thanks,
raji -
Which function module to delete job log?
Hi, I submit report via jobname and jobcount. After I close job and run it, we can see jobname is still in job log by SMX. But client doesn't want to see it, so who can kindly tell me which function module can delete jobname from job log?
Thanks a lot.
Jacktry CALL FUNCTION 'BP_JOB_DELETE'
If you have used JOB_OPEN before the SUBMIT to create the job, you can automatically delete the job upon successful completion by setting the parameter DELANFREP = 'X' in the JOB_OPEN function call.. this way the user will only see the logas for cancelled/aborted jobs..
~Suresh
Message was edited by: Suresh Datti -
Is there any BAPI or function module to delete entries from a table (VBAK)
Hi Everybody,
this is my first thread in SDN...
my problem follows...
A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
tables:
VBAK sales document: header data
selection fields:
VBAK-LIFSK ≠ <BLANK>
VBAK-ERNAM = userID used by e-Sales / IVE
(EP-BATCH / EAI-BATCH)
VBAK-ERDAT <= Current system Date
VBAK-ERZET <= Current system Time - 20 minutes
These orders should be deleted from SAP system.
This report should be scheduled to run regularly every 10 minutes.
my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
best replies will be rewarded....
regards
ReddyHi Vasanth ,
thanks for your reply.
i tried in the same manner what u mentioned.
but how to pass only one parameter to the functionmodule..
here in this case we have to pass only update flag as 'D'..
i did the same it giving dump..
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ORDER_HEADER_INX".
Although the currently specified field
"INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.
my pgm :
*& Report YNEW_ORDER_DELETION
REPORT ynew_order_deletion.
TABLES:vbak.
PARAMETERS:
p_lifsk LIKE vbak-lifsk DEFAULT '02'.
SELECT-OPTIONS:
s_lifsk FOR vbak-lifsk DEFAULT '10',
s_ernam FOR vbak-ernam,
s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
s_erzet FOR sy-uzeit.
*PARAMETERS:
p_erzet LIKE sy-uzeit.
s_erdat like vbak-erdat,
s_erzet like vbak-erzet.
DATA:
BEGIN OF int_final OCCURS 0,
w_vbeln TYPE vbak-vbeln,
END OF int_final.
DATA:
int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
DATA:
wf_time TYPE sy-uzeit.
INITIALIZATION.
s_ernam-low = 'KULKARMA'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
s_ernam-low = 'EAI-BATCH'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
wf_time = sy-uzeit - 1200.
p_erzet = sy-uzeit - 1200.
p_erzet-low = wf_time.
APPEND s_erzet.
int_order_header_inx-updateflag = 'D'.
APPEND int_order_header_inx.
START-OF-SELECTION.
SELECT vbeln FROM vbak
INTO TABLE int_final
WHERE lifsk EQ p_lifsk
AND ernam IN s_ernam
AND erdat IN s_erdat
AND erzet IN s_erzet.
IF sy-subrc = 0.
LOOP AT int_final.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = int_final-w_vbeln
ORDER_HEADER_IN =
order_header_inx = int_order_header_inx
SIMULATION =
BEHAVE_WHEN_ERROR = ' '
INT_NUMBER_ASSIGNMENT = ' '
LOGIC_SWITCH =
NO_STATUS_BUF_INIT = ' '
TABLES
return = int_return
ORDER_ITEM_IN =
ORDER_ITEM_INX =
PARTNERS =
PARTNERCHANGES =
PARTNERADDRESSES =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
SCHEDULE_LINES =
SCHEDULE_LINESX =
ORDER_TEXT =
ORDER_KEYS =
CONDITIONS_IN =
CONDITIONS_INX =
EXTENSIONIN =
ENDLOOP.
LOOP AT int_return.
WRITE:/ int_return-type,
int_return-id,
int_return-number,
int_return-message.
ENDLOOP.
ENDIF.
please help me ..its a very urgent issue to be solved...
am waiting for ur reply...
regards
gangareddy -
Program or Function module to delete data from Open Hub Destination Table
Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay KumarYou can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder -
Can we call function module in sap script
hi
can we call function module in sap script
i want to use function module HR_TMW_GET_EMPLOYEE_NAME in sapscript
to get Empname by using personal no
pernr no is coming from bseg-pernr table
so how i can use it .
please help me
thanks in advanced.hi,
You can use like this:
PERFORM FUNCTION_MODULE IN PROGRAM SUBROUTINE_POOL
USING &FIELD1&
USING &FIELD2&
CHANGING &FIELD3&
ENDPERFORM.
where function_module is the func. module name defined in program SUBROUTINE_POOL , field1 n field2 are the fields to be passed, and field3 is the value which you want to display...
You have to read field1 & field2 in the pool, process them & get the value of field to be output.
Reward helpful answers.
Regards,
SIddhesh Sanghvi. -
Is their any function module for deleting condition record i am trying
Hi Experts,
Is their any function module for deleting condition record i am trying this way.......
DATA: TABLE (4) TYPE C.
DATA: KNUM LIKE KONH-KNUMH
DATA: K_VEWE LIKE T681-KVEWE VALUE 'A'.
DATA: T681_STR LIKE T681.
DATA: LV_NUM TYPE I.
GET PARAMETERS
PARAMETERS: TABNO LIKE T681-KOTABNR.
PARAMETERS: TESTMODE DEFAULT 'X' AS CHECKBOX.
REFRESH INT_KNUMH.
Select single * from T681 into T681_STR
where kvewe = K_VEWE AND
KOTABNR = TABNO.
IF SY-SUBRC NE 0.
WRITE: / 'No entry in T681 for number ', TABNO.
WRITE: / 'Check whether corresponding condition table exists.'.
EXIT.
ENDIF.
TABLE = T681_STR-KOTAB.
SELECT KNUMH FROM (TABLE) INTO KNUM.
SELECT SINGLE * FROM KONH WHERE KNUMH = KNUM.
IF SY-SUBRC NE 0.
INT_KNUMH-KNUMH = KNUM.
COLLECT INT_KNUMH.
ENDIF.
ENDSELECT.
DESCRIBE TABLE INT_KNUMH LINES LV_NUM.
IF LV_NUM EQ 0.
WRITE: / 'No inconsistent entries found.'.
WRITE: / 'Each record in the condition table has a corresponding.'.
WRITE: / 'entry in the KONH table.'.
EXIT.
ENDIF.
LOOP AT INT_KNUMH.
IF TESTMODE IS INITIAL.
DELETE FROM (TABLE) WHERE
KNUMH = INT_KNUMH-KNUMH.
IF SY-SUBRC = 0.
WRITE: / 'KNUMH =', INT_KNUMH-KNUMH(10), ' deleted from table ' ,TABLE.
ELSE.
WRITE: / 'DELETE: SY-SUBRC is', SY-SUBRC , ' FOR KNUMH = ' .
WRITE: INT_KNUMH-KNUMH(10).
ENDIF.
ELSE.
WRITE: / 'TESTRUN: KNUMH =', INT_KNUMH-KNUMH(10).
ENDIF.
ENDLOOP.
is their any Standerd Function module for comparing tables if the condition record not exist in it has to exit if it is their then compare those two tables if not exist in one table also that has to be delete the condition record
Please let me know .....Hi,
You can use Function module PRICING_CHECK to check condition record. Do a where-used list on it to see how to call it.
Regards
Kiran Sure -
Using Function Module in SAP Script
Dear Friends,
how can i use function modules in sap scripts?. i want to use call function SPELL_AMOUNT in sap script?
in text element using perform statement hw can i use?
Regarding i search related articles but, i am not getting any solution.
Plz help Me.
Regards,
K.S.KannanDear Kanan,
You can do it in two ways:
Way1
your Amount will be in some variable say VAR_AMT1 and want in words in field say VAR_SPELL.
In your report program you can use the function module SPELL_AMOUNT and pass the VAR_AMT1 to it and you will get the words in VAR_SPELL.
So now in your sap script you can use the variable VAR_SPELL to print the amount in words.
we normally use this above method.
WAY2
You are inside Sap script and you can write the following code in the sap Script window.
/: PERFORM AMT_TEXT IN PROGRAM ZF_REPORT USING &VAR_AMT1& CHANGING &VAR_SPELL&
/: ENDPERFORM
In the Tag Column when you press F4 you can see various symbols like
/: = ( / /= /( /: /* /E
. Select
In the program ZF_REPORT (any report) you should have the perform AMT_TEXT where you should use the function module SPELL_AMOUNT to convert the amount into words.
Hope its Clear. -
What are function modules used in alv,and its explanation
what are function modules used in alv,and its explanation
hi..
The important function modules are
Reuse_alv_fieldcatalog_merge
Reuse_alv_list_display
Reuse_alv_events_get
Reuse_alv_grid_display
Reuse_alv_commentary_write.
<b>REUSE_ALV_FIELDCATALOG_MERGE</b>
This function module is used to populate a field catalog which is essential to display the data in ALV.
If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter (I_structure_name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
Note : Fieldcatalog can be filled manually also by filling up all the required details into the internal table
The important parameters are:
1. Export:
a. I_program_name : report id
b. I_internal_tabname : the internal output table
c. I_inclname : include or the report name where all
the dynamic forms are handled.
2. Changing
ct_fieldcat : an internal table with the type
SLIS_T_FIELDCAT_ALV which is declared in the
type pool SLIS.
<b>REUSE_ALV_LIST_DISPLAY</b>
This is the function module which prints the data.
The important parameters are:
1. Export:
I_callback_program : report id
I_bypassing_buffer : X
I_buffer_active :
I_callback_pf_status_set : routine where a user can set
his own pf status or change the
functionality of the existing pf status.
I_callback_user_command : routine where the function codes are
handled.
I_structure name : name of the dictionary table
Is_Layout : structure to set the layout of the report
It_fieldcat : internal table with the list of all fields and their
attributes which are to be printed (this table
can be populated automatically by the function
REUSE_ALV_FIELDCATALOG_MERGE
It_events : internal table with a list of all possible events
of ALV and their corresponding form names.
2. Tables:
a. t_outtab : internal table with the data to be output
<b>REUSE_ALV_EVENTS_GET: </b>
Returns table of possible events for a a list type
1. Import:
Et_Events :
The event table is returned with all possible CALLBACK events for the specified list type (column NAME). For events to be processed by the Callback, their FORM field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field FORM filled and the entry modified using constants from the type pool SLIS.
2. Export:
I_list_type:
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchical-sequential list
REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
<b>REUSE_ALV_GRID_DISPLAY</b>
A new function from 4.6 version, to display the results in grid rather than a
preview.
Parameters : same as reuse_alv_list_display
<b>REUSE_ALV_COMMENTARY_WRITE</b>
This is used in the Top-of-page event to print the headings and other
comments for the list.
It_list_commentary : Internal table with the headings of the type
slis_t_listheader.
This internal table has three fields:
Typ : H - header, S - selection, A - action
Key : only when typ is S.
Info : the text to be printed
<b>plz reward pts if helpful.</b>
regards
vijay. -
Function module to delete TOP-N Products
Hi All,
We have a requirement wherein we need to write a report program to delete TOP-N Products at Item level ( TCODE: CRMM_PPR_TOPN).
Kindly let me know if you know any function module to delete these products.
Thanks in advance,
KeyaQuestion:
1. Do you want to delete the product that is listed in the Top-N? or
2. Get rid of the Top-N list ?
You have already put this question and you have got lot answers for (1).
If it is (2), then here are some thoughts about it.
Top-N list products are a result of what you maintain in BI parameter ID in the CRM configuration. Actually it is a result of a "query" to BI - in a way...
Tcode: SPRO to IMG.
In IMG, go to
CRM
Marketing
Product Proposals
Define BI parameters ID for Top n Lists
So, if you don't want to see the products in the list, change the parameter ID or get rid of it. -
Function module for calculating planned and actual cost of production order
Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
SriniHi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran -
How to check for a function module with its description and functionality
Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod -
Search for a function module for deleting document originals (DMS)
Hi,
I'm searching for a function module to delete originals in documents (like manually with transaction cv02n). I'm only able to set an delete mark with the module 'BAPI_DOCUMENT_DELETE'.
The module 'BAPI_DOCUMENT_CHANGE2' can only add new originals to an existing document. I need a possibility to delete all originals in an document without deleting the document itself.
Has anyone an idea?
Thanks.
Jan-Christian TreuschMany thanks!
That's especially the method I've searched for so long....
best regards.
Jan-Christian Treusch
Maybe you are looking for
-
How to set activity type for a cost center
i was practicing the split valuation topic and for the that i was making a routing for a product so that i can have that product for inhouse production. while using ca01(to create routing), i am facing a problem with the activity type. when i am sett
-
Function module / BAPI for changing planning date (FDTAG)
Hi everyone, Let's go for a problem. Many FI documents have been created in our system, with a wrong planning date, these documents have to be changed and I have been trying to develop a report. I am having a big trouble finding a function module or
-
ADG is not picking up changes from this getter
My ADG is not picking up changes from this getter, is it because the whole class needs to implement IEventDispatcher ? <mx:AdvancedDataGridColumn headerText="Delete" dataField="reviewDate" visible="{userModel.loggedInUser.deleteReview}" id="deleteCol
-
Drive not ready for use, door may be open
iTunes transfers about 800mb of content before error message appears: The drive is not ready for use; its door may be open. Please check drive\... I have restored, formatted, tried different PC's always get same result. Visited genius bar and they de
-
Dear Experts, I have included a Interactive PDF document UI element in a WebDynpro component filling the PDFsource attribute of the UI . Now when the webdynpro application is executed I could find the PDF document displayed in browser. When I make ch