Function Module to get central instance - /SDF/INSTANCE_INFO
Hi All
Inside an abap program it is necessary to create a job. This job must run at the central instance with high priority.
I am going to use the FM /sdf/instance_info to obtain the central instance and export it at the targetserver parameter of the function JOB_CLOSE.
At the FM JOB_OPEN I will export 'A' to the parameter job_class.
My question:
- This function /SDF/INSTANCE_INFO may somehow cause damage to the production environment?
- Submitting a job with class 'A' may harm the production environment?
Could you please advise?
Thanks in advance.
João Gaia
Hi,
The FM only reads the central instance, it wont update anything so you can use the FM.
A-High priority, the system reserves at least one separate background work process for your job. Class A jobs are always processed before jobs of other classes.
If your job is a critical job then use this class otherwise use default class C.
Regards
Praveen
Similar Messages
-
Function module to get pernt by passinf objid and otype
Hi,
Help me to find any function module to get pernr by using objid and otype.or table name from which we can get pernr by passing objid and otype.
thanks,
satish.You are talking about on the OM side and obtain the perner via object P?
You can through a few method. One is using evaluation path. There is a function module called HR_STRUC_GET which allow you to pass evaluation path to get the result.
Using that, you could create a simple evaluation path from position (object s) to person (object p). The object ID of object P is your pernr.
Unless you have central person functionality, that might no longer be the case. -
Function module for getting Vendor Address details
Hi,
Im new to this group,and new to ABAP
plz hep me out by solving ABAP Query...
i want to generate a report for getting Vendor Details
like Vendor address,Ph num and Email
input fields are Company code,country key and Account Group.
im Using Smart Forms for this..
but im not getting the Exact Function module to get All Required Details..
regards
Smithathanks for ur quick reply...
SELECT SINGLE LIFNR
FROM LFB1
INTO V_LIFNR
WHERE BUKRS EQ V_BUKRS.
CALL FUNCTION 'VENDOR_READ'
EXPORTING
i_bukrs = V_BUKRS
i_lifnr = V_LIFNR
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this is the code i have written...
but my problem is there no table in the Function module....
for Example...
CALL FUNCTION 'QPAX_PLMKB_READ_FROM_PLKO'
EXPORTING
i_plnty = 'Q'
i_plnnr = V_PLNNR
I_PLNAL = V_PLNAL
i_sttag = V_DATUV
TABLES
T_PLMKB_TAB = IT_TAB
i want the function modules with tables and proper input... -
Function module for getting the open qty
HI experts,
I have a PO quantity(EKPO_MENGE).against same PO and item item(EBELN and EBELP) if Goods receipt has happened (MSEG_ERFMG) then i need to calculate the open qty.and also by netting the open quantity if multiple GRs has done against the same PO and item.
Can you suggest any function module to get this open PO quantity.Hello,
Hope this link can help you.
[Po Open Quantity;
Thanks
Jayant -
ABAP - Function module to get the number of working days between 2 days
Hi gentlemen,
I have been asked to produce a report that gives the number of working days between 2 days, based on a calendar.
I didn't find anything...
Has any of you already written a function module to get this ?
A great thanks in advance.
Jacques LagrifHi ,
you can try this ,
when you require the number of working days between D1 and D2
Total No of Days will be
D2 - D1
No of holidays between D1 and D2 , use the FM HOLIDAY_GET
Pass the From date , to date , and the factory calendar to get the of Holidays
Total no of days - Number of Holidays will your Working days
Regards,
Sathya -
Function Module to get the Screen
Hello All,
Can anybody provide me a Function Module to get the Screen by giving Program Name and Screen Number.
Thanks,Hello
check FM RS_IMPORT_DYNPRO
CALL FUNCTION 'RS_IMPORT_DYNPRO'
EXPORTING
dylang = pmlang
dyname = programname
dynumb = screen
IMPORTING
header = header
TABLES
ftab = ifields
pltab = iflowlogic.
or you have to create join b/w table reposrc and tadir .
Thanks
Anirudh -
Function module to get the details (WTGBTR) from table COEP
Hi all,
I have to select the data from COEP table based on OBJNR, KSTAR and KOKRS.I want WTGBTR from COEP Table.
Right now Iam using select query.But i want to use function module.
Can any one please tell me is there any function module to get WTGBTR from COEP table.
Thanks.This'll work:
SELECT objnr bukrs wtgbtr
INTO CORRESPONDING FIELDS OF TABLE gt_coep
FROM coep
WHERE lednr = '00' "<========
and kokrs = '1000'
AND kstar IN ('0000810001' , '0000830001')
AND objnr IN s_objnr
AND bukrs IN s_bukrs.
Rob -
Function module to get table description
Is there any function module to get table description on passing table name
Hi,
We need to use : 'G_RW_TABLE_DESCRIPTION_GET' function module.
we pass the table name and the language.
call function 'G_RW_TABLE_DESCRIPTION_GET'
exporting
rw_table = p_table
langu = sy-langu
importing
tab_text = l_tabtext
exceptions
others = 1.
thanx. -
Table or Function module to get Internal order planning and Cost element pl
Dear All,
Table or Function module to get Internal order planning and Cost element planning.
Internal order planning from T-code KO13.
Thanks in advance.
Regards,
Ravi
Edited by: Ravi Chandra on Sep 13, 2011 8:08 AMBPEJ, BPEG, BPEP
-
Function Module to get pernr number based on first name and last name
Hi All,
What is the Function Module to get pernr number based on first name and last name.
Could you please help me.
T@R.
Vidyahi Vidya,
you can get perner from PA0002 based on firs name and last name.
use select query and get perner. -
Function module to get customer balances
Hello , is there a FM to get customer balances?
hi Sooness,
i am not sure but you can check with the BAPI:
BAPI_AR_ACC_ GETKEYDATEBALANC E
function module to get AR (customer balance).
and also have a look in the link below:
http://www.sapbapi.com/bapi-list/
http://www.erpgenie.com/abap/functions.htm
With luck,
Pritam. -
Function module to get BOM which WOULD be created if I open a production
Is there a function module to get the BOM which WOULD be created if I open a production order?
note that I don't have the produciton order created.
I already tried with the FM CS_BOM_EXPL_MAT_V2 and CSAP_MAT_BOM_READ.
I debuged the CO01, but I did not find it.
This BOM should include materials which are under a phantom component.
Edited by: Rodrigo Pelos on Jul 20, 2011 6:55 PMHi Greetson Shunmugasundaram,
thanks for the reply, but for the FMs CO_SD_RESB_FROM_BOM_CREATE and CO_SD_NEW_BOM_ASSIGNEMENT it's necessay to have an production order but I don't have it. And with CS_ALT_SELECT_COUPLED_PRODUCT I could not get a BOM.
Let me explain in more details how I'm going to use this information, I think I was not clear in my post.
I'm creating a report to compare the BOM of a production order with BOM which would be created today if I open a production order.
Then I can check if there was changes in the reservation (RESB) of the production order. If this changes happened, how many pieces. I'll check also if there was differences in consumption, because during the production order confirmation it is possible to make changes.
I would not like to make the BOM explosion "manually" because there are too many variables in the BOM like phantom, alternative, scrap and so on, but I don't know if the function module that I'd like to use exists. -
Function Module for getting address from address number
Hi all,
Is there any function module for getting address from address number. kindly reply.
regards,
siyaHI,
just try this function module:
CALL FUNCTION 'HR_GET_ADDRESS'
EXPORTING
ankey = ankey
anart = anart
molga = '01'
IMPORTING
address_detail = adr_data
EXCEPTIONS
not_found = 1
OTHERS = 2.
HOPE IT WILL HELP YOU
regards
rahul -
Is there any function module for getting distribution list name
Hi all,
Is there any function module for getting distribution list name when there is same description for two distribution list name.
or
help me how to fetch the correct distribution name when there is same description.
In order to send mails.
Tell me ASAP.
thanks
sagar.http://www.sapbrainsonline.com/REFERENCES/FunctionModules/SAP_function_modules_list.html
list of Fms -
Any function module for getting fiscal year week numbers
can any one provide me function module for getting fiscal year week numbers ? if no function module please let me know work around.
Thanks!
Lakshmikandhhi,
Use FM <b>'DATE_GET_WEEK'</b>...
parameter D1 LIKE SCAL-DATE.
Data w like scal-week.
CALL FUNCTION <b>'DATE_GET_WEEK'</b>
EXPORTING
date = D1
IMPORTING
WEEK = W
EXCEPTIONS
DATE_INVALID = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write W+4(2).
Regards,
Santosh
Maybe you are looking for
-
How come I can't see my Ipod Touch on Itunes?
When I had the 9.2 version (the one before 10), just recently before I changed it to 10, my Ipod Icon wouldn't show up on Itunes so I couldnt sync my ipod or do anything, even though it was plugged and was charging. So, then I was like okay, maybe th
-
GotoAndPlay next scene when reach the "end" cue point
Hi, I have a flv with actionscript cue point "welcome_end". It's will be progressive download from web server. It has a component name "flv_welcome" on stage. What I want to do is after the flv play reach to its end, the flash movie will go to and pl
-
Hi all, I have a single select statement to monitor JOB status at database msdb, it works perfectly at versions 2000, 2005 and 2008 but in version 2012 got denied access to views syscategories, sysjobactivity, sysjobhistory, sysjobs and sysjobsteps e
-
Appear "Error 1004" when trying to downloads all the apps in apps store.... Can't purchase the apps with the updated payment methods as well... Please help and kindly advise further.. Thank you....
-
Return commit for DP-K---Why no Internet Explorer access due to problem with web page?
I ran full scans on MBAM & SUPERAntiSpyware as requested. All I got was 2 adware tracking cookies detected with the spyware program. I have Windows Vista Home Basic with a 32-bit operating system IE version was Internet Explorer 8 & I also downloa