Functioning of a BW query based on a Multiprovider
Hi experts,
In order to optimize performance of a query, I have a theoretical question about functioning of a query which is based on a multiprovider. It could appear basic for you.
We can imagine a muliprovider which is composed of an Infoprovider A (10 000 000 records of the year 2010) and an Infoprovider B (5 000 000 00 records of the year 2011).
In BEx Query designer, if I make a filter on the characteristic "Infoprovider" by selecting only Infoprovider B, could you tell me if BW system will read only the 5 000 000 00 records of the Infoprovider B, or if it will read all the data of the Multiprovider, in spite of the filter placed in the query ?
Thanks a lot for your responses,
Tempka
It depends upon where you are putting the filter.
1. If it's global filter then it will be extract only from infoprovider B.
2. If you are restricting some KF based on Infoprovider then it will fetch all data from both A & B and at local level it restrict the KF with infoprovider B.
Performance wise option 1 is good, but reporting requirement may lead you to go for option 2.
Thank-You.
Regards,
Vinod
Similar Messages
-
Query on Reoprts-pl/sql function body returning sql query
Hi,
I am facing a starnge problem.. and would like to know the reason for it.
The situation is as follows:
I have a report (pl/sql function body returning sql query based). My query is as follows:
declare
l_query1 varchar2(2000);
begin
if (:P102_min_value is not null and :P102_max_value is null) then
l_query1 := 'select decode(:P102_date,'1',date1) Transaction_Date, decode(:P102_first_name,'2',first_name) First_Name from (
select * from MORTGAGE_LOAN_LEADS where APPRX_LOAN_AMOUNT >=:P102_min_value
return (l_query1);
end if;
end;
This returns the error as :
1 error has occurred
Function returning SQL query: Query cannot be parsed within the Builder. If you believe your query is syntactically correct, check the generic columns checkbox below the region source to proceed without parsing.
(ORA-06550: line 7, column 20: PLS-00103: Encountered the symbol "1" when expecting one of the following: * & = - + ; < / > at in is mod remainder not rem <> or != or ~= >= <= <> and or like LIKE2_ LIKE4_ LIKEC_ between || multiset member SUBMULTISET_)
How do i correct this? am i right in thinking that the single quotes indicating a string within a select query is creating the problem? Beacuse if i use an sql query report and use the following query, it is working fine...
select
decode(:P102_date,'1',date1) Transaction_Date,
decode(:P102_first_name,'2',first_name) First_Name
from (
select * from MORTGAGE_LOAN_LEADS where APPRX_LOAN_AMOUNT >=:P102_min_value
But i need to write pl/sql function, so that multiple report can be returned based on different conditions. Please guide me.
Thanks,
SumanaDoes that mean that both in if and else we need to have same columns selected?
if thats the case.. any idea how i can implement it in my code. The situation here is that the columns that need to be selected are dynamic and keep on changing...
if i try to implement like this and run the page, it gives the following error:
Query is:
declare
l_query1 varchar2(4000);
begin
if apex_application.get_current_flow_sgid(:APP_ID) = apex_application.get_sgid then
if (:P102_min_value is not null and :P102_max_value is null) then
l_query1 := 'select decode(' || :P102_date|| ',''1'',date1) Transaction_Date, decode(' || :P102_first_name || ',''2'',first_name) First_Name from (
select * from MORTGAGE_LOAN_LEADS where APPRX_LOAN_AMOUNT >=' || :P102_min_value ||'
elsif (:P102_min_value is null and :P102_max_value is not null) then
l_query1 := 'select decode(' || :P102_date|| ',''1'',date1) Transaction_Date, decode(' || :P102_first_name || ',''2'',first_name) First_Name from (
select * from MORTGAGE_LOAN_LEADS where APPRX_LOAN_AMOUNT >=' || :P102_max_value ||'
else
l_query1 := 'select date1,first_name from MORTGAGE_LOAN_LEADS where rownum = 1';
end if;
else
l_query1 := 'select date1,first_name from MORTGAGE_LOAN_LEADS where rownum = 1';
end if;
return l_query1;
--dbms_output.put_line( l_query1);
end;
The Error is:
failed to parse SQL query:
ORA-00936: missing expression
If i try to run the same in command prompt, it always goes to the else part... (else of outer if) -
Dynamic filter on time characteristics on OLAP SAP BEX query based universe
Dear all,
I'm currently working on the integration between SAP NetWeaver BI 7.0 and SAP BusinessObjects XI 3.1 FP 1.5 via integration kit.
I've built an OLAP universe on the top of a BW query based on a multiprovider that contains 10 infocubes.
Everything works fine but I need to create a filter in the OLAP universe that allows to restrict data by current date (e.g. using TIME characteristic of Infocube such as 0CALDAY or 0CALMONTH). From that filter we could start creating other conditions to compare data to different time periods.
I've already tried to use a SAP exit variable in a BW query but this kind of object would restrict query data only by current date and for example it would be impossible to browse data by previous years (to bypass this problem we could use restricted key figures with different offsets but we have too many key figures in the query and the number of restrictions
would rise exponentially).
In a relational DataBase we can do that using a "where condition" based on 'CURRENTDATE' (SQL DB2 syntax).
Now, we need to apply the same logic but translated in MDX syntax.
Is it possible to enter a dynamic filter in the OLAP universe or just fixed or promt values ?
Any advise?
Thanks in advance.
Best Regards.
M.Hi Ingo,
1) My question is: "How can I have to manage variable in BEX queries and in the UNIVERSE in order to obtain the maximum flexibility to create reports with measures on actual day (for example) without asking the user to promt a value ?"
I want to use an unique BEX query to define an unique UNIVERSE. On this UNIVERSE I want to create many reports (actual day, previous day, and so on).
If I restrict 0CALDAY with an EXIT variable then shall I be able to create a different restrictions on the same Universe based on 0CALDAY ?
2) Another question is:
Is it possible to insert an XML / MDX filter on the OLAP Universe with dynamic derivation of the system date ?
For example:
Instead of this:
<FILTER KEY="[0FISCYEAR].[LEVEL01].[NAME]">
<CONDITION OPERATORCONDITION="Equal">
<CONSTANT CAPTION="Z12008"></CONSTANT>
</CONDITION>
</FILTER>
Is it possible to insert a tag with a dynamic function to derive the system date ?
Thanks in advance.
Best Regards. -
Can we call a function module in ADHOC query
Hi
Can we call a function module in ADHOC query if yes how.
Also we ned to know how to call a function module in SAP query.
An early responce is appreciated.
Thanks and best regards
RajeevOkay as far as I understand your aim is:
To fill a field in the output list with a value that is based on the current line information and calculated by a function module
So go to SQ02 and create an additional field in the InfoSet.
You can refer in the coding to the technical names you can see in the left tree window like P0000-PERNR.
More information is avaiable in the Help part look for additional field in SQ02.
Regards,
Michael -
Query based taxonomy from scratch gives NoSuchMethodError...
I'm trying to create a query based taxonomy following the instuctions specified in the help docs: KM Platform -> Admin Guide -> Content Mgmt -> Taxonomies and Classification -> Creating a QBT -> from scratch. I created an index on a newly created (hence empty) folder in the 'documents' repository. So, essentially, the data source points to that folder. Also, I selected 'TREX Classification' on the 'Service' drop-down while creating the index. I left the crwler profile as blank. Then I went on to create a new 'Query Based Taxonomy'. I was able to create it alright, but as soon as I click on it to add folder and the such, I get this error:
java.lang.NoSuchMethodError
at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.getDocumentTaxRMRids(TaxonomyNamespaceManager.java:1876)
at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.getTaxonomyClassResources(TaxonomyNamespaceManager.java:1831)
at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.addChildDocuments(TaxonomyNamespaceManager.java:1942)
at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.getChildren(TaxonomyNamespaceManager.java:368)
at com.sapportals.wcm.repository.CollectionImpl.internalGetChildren(CollectionImpl.java:966)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:179)
Any help in solving this is highly apprecaited.
We run EP6 SP2.
I did NOT create a 'crawler profile' for this set up.
thanks,
Biju.Hi Biju,
re. your NW'04 SP stack 4 migration intention:
NW'04 is still in ramp-up (SP stack 4 is the current shipment bundle of it) so at the current point in time, only participating ramp-up customers can use it.
A migration from EP6.0 SP2 to NW'04 will be possible (but not during the ramp-up phase).
From a Knowledge Management & Collaboration perspective, we will port most of the NW'04 SP stack 4 functions to EP6.0 SP2 as well. These functions will be shipped as EP6.0 SP2 Patch 5 (planned shipment date beginning of Q4 / 2004) so for mid-term, you can also plan to stay on EP6.0 SP2 if you have no other pressing reasons for going to NW'04 (e.g. enhanced Web AS functions).
This feature porting from NW -> EP6.0 SP2 is an 'only-once' action, however, and NetWeaver will be the release for new features in the future.
Regards,
Joerg -
Query Based Taxonomy - Dynamic Creation of a Query Problem
Hi,
I'm trying to create new category nodes in a taxonomy and to assing them queries. I know how to do this, but I encountered a strange behavior. Here is the situation:
I have a string property DocumentType. When manualy creating a query, it looks like:
DocumentType CONTAINS "Some string"
But when I do the same using code I get:
DocumentType IS "Some string"
And as a result of this, the taxanomy is not working properly.
Here is the code:
indexService =
(IIndexService) ResourceFactory
.getInstance()
.getServiceFactory()
.getService(
IServiceTypesConst.INDEX_SERVICE);
// This kind of classification index offers functionality working with query based taxonomies
qbcIndex = (IQBClassificationIndex) indexService.getIndex(indexId);
// Get a query folder - a query folder is a representation of a query based taxonomies category
queryFolder = qbcIndex.getQueryFolder(RID.getRID(folder));
// List of IQueryEntry objects for the query folder
queryEntryList = queryFolder.getQuery(context);
// Cast the IQBClassificationIndex into a ISearchIndex object
searchIndex = (ISearchIndex) qbcIndex;
queryEntry = searchIndex.getNewQueryEntry();
queryEntry.setRowType(IQueryEntry.ROW_TYPE_ATTRIBUTE);
queryEntry.setPropertyName(propertyName);
queryEntry.setPropertyOperator(IQueryEntry.PROPERTY_OPERATOR_EQUAL);
queryEntry.setValue(propertyValue);
queryEntry.setTermAction(IQueryEntry.TERM_ACTION_EXACT);
queryEntryList.add(queryEntry);
// Set the query for the query folder
queryFolder.setQuery(queryEntryList, context);
qbcIndex.updateCategoryContents("Document_Types", false, context);
Can somebody tell me what am I doing wrong please. Isn't it because of IQueryEntry.PROPERTY_OPERATOR_EQUAL? Is there any substring operator?
Thanks a lot.Hi, Robert
In this moment, I have a problem with Query Based Taxonomy, maybe could you help me. I insert the query in to the taxonomy from code, but when i use the method
qbcIndex.updateCategoryContents("/taxonomies/borrame5/Prueba2", false, context);
I got the next exception:
#1.5#0014C210F3D1002A000001200000565B000431CC93AD5979#1180654627543#System.err#sap.com/irj#System.err#dummy01#10241#####SAPEngine_Application_Thread[impl:3]_17##0#0#Error##Plain### at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)#
#1.5#0014C210F3D100310000012B0000565B000431CCC47166AB#1180655445698#System.err#sap.com/irj#System.err#dummy01#10241#####SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain###com.sapportals.wcm.service.indexmanagement.IndexNotReadyException: Some documents are not included in this update because indexing has not been finished yet.#
#1.5#0014C210F3D100310000012C0000565B000431CCC4717417#1180655445701#System.err#sap.com/irj#System.err#dummy01#10241#####SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain### at com.sapportals.wcm.service.indexmanagement.retrieval.trex.AbstractTrexIndex.updateCategoryContents(AbstractTrexIndex.java:2493)#
I have doubt what parameters i need to pass to the method updateCategoryContents,
Let me give some information:
taxonomy:
/taxonomies/borrame5/Prueba2
repository:
/documents/Portal_KOF/KM/Pruebas1/Pruebas Versionamiento
classification and search index:
borrame5
I can't classify automatically, when i insert the query from code. When I manually insert the query from the portal, automatic classification run perfectly.
Thanks
Greetings
JARO. -
Additional i/o fields to infoset query based on PNPCE logical database
Hi All,
I have a requirement to add two additional input and output fields "job function" and "job family" to a infoset query based on logical database PNPCE. I am new to writing code in infset query and there are so many code areas in infoset query. I am confused where to write code and how to limit the output list based on the user selection to the additional fields "Job function" and "job family". have any one done this in the past?. is there sample code somewhere to do something similar to this?
Your help will be much appreciated with points! (as per our community guidelines)
Regards,
ArulHello Arul,
Your question would be better answered if you post it in on of the Business Intelligence Forums. Please close this thread and goto:
Expert Forums » Business Intelligence
or
/community
Regards,
Manny -
Query based on main table and audit table
Hi,
I had created auditing on some table. Values might not change and if they changed, it should be stored in audit table.
I want to get the values in the table a on real time basis, like dimentions in datawarehouse.
Trying to write a query based on table a and aud_a to get point-in-time or values at anytime in the past.
Something like
SELECT *
FROM a (table_name)
WHERE effective_from >= $DATE_TO_QUERY
AND effective_to < $DATE_TO_QUERY
How to get this kind of query .
Please help. ( Table structure for table a and audit table aud_a and trigger aud_tg_a given below)
Giving code as follows.
main table a
create table a
( val1 number,
val2 number,
update_by varchar2(30),
date_updated date);
creare auidt table aud_a
create table aud_a
( "AUDIT_SEQ" NUMBER,
"AUDIT_TRAN_ID" NUMBER,
"AUDIT_PROG_ID" VARCHAR2(30 BYTE),
"AUDIT_TERMINAL" VARCHAR2(16 BYTE),
"AUDIT_REASON" VARCHAR2(30 BYTE),
"AUDIT_ACTION" CHAR(1 BYTE),
"AUDIT_ACTION_BY" VARCHAR2(20 BYTE),
"AUDIT_ACTION_DT" DATE,
val1 number,
val2 number,
updated_by varchar2(30),
date_updated date);
trigger on table a to populate aud_a
CREATE OR REPLACE TRIGGER aud_tg_a AFTER
INSERT OR
DELETE OR
update on a
for each row
declare
v_time_now DATE;
v_terminal VARCHAR2(16);
v_tran_id NUMBER;
v_prog_id VARCHAR2(30);
V_reason VARCHAR2(30);
BEGIN
v_time_now := sysdate;
v_terminal := userenv('TERMINAL');
v_tran_id := 1;
v_prog_id := 'test';
v_reason := 'AUDIT';
IF inserting THEN
INSERT
INTO a
audit_seq,
AUDIT_tran_id,
AUDIT_prog_id,
AUDIT_reason,
AUDIT_terminal,
AUDIT_action_by,
AUDIT_action_dt,
AUDIT_action ,
val1,
val2,
updated_by,
date_updated
VALUES
s_audit_no.nextval,
v_tran_id,
v_prog_id,
v_reason,
v_terminal,
USER,
v_time_now,
'I' ,
:new.val1,
:new.val2,
:new.updated_by,
:new.date_updated
elsif deleting THEN
INSERT
INTO a
audit_seq,
AUDIT_tran_id,
AUDIT_prog_id,
AUDIT_reason,
AUDIT_terminal,
AUDIT_action_by,
AUDIT_action_dt,
AUDIT_action ,
us_agy_backed_id,
industry_subgroup,
comments,
updated_by,
date_updated
VALUES
s_audit_no.nextval,
v_tran_id,
v_prog_id,
v_reason,
v_terminal,
USER,
v_time_now,
'D' ,
:old.val1,
:old.val2,
:old.comments,
:old.updated_by,
:old.date_updated
elsif updating THEN
INSERT
INTO a
audit_seq,
AUDIT_tran_id,
AUDIT_prog_id,
AUDIT_reason,
AUDIT_terminal,
AUDIT_action_by,
AUDIT_action_dt,
AUDIT_action ,
us_agy_backed_id,
industry_subgroup,
comments,
updated_by,
date_updated
VALUES
s_audit_no.nextval,
v_tran_id,
v_prog_id,
v_reason,
v_terminal,
USER,
v_time_now,
'U' ,
:new.val1,
:new.val2,
:new.updated_by,
:new.date_updated
END IF;
END;
-------------------------Hi hoek,
I am not able to use Oracle's audit functionality becuase I need to trap some changes in particular tables and then rebuild query if required.
Thanks for your suggestion though.
Regards,
Milind -
Disc 4137 - query based on login?
We have a sales table in Discoverer that we want to allow sales managers to access so they can define their own ad-hoc queries. However we only want them to be able to query based on sales attributed to them i.e. they can't query on other sales managers.
I know I can build business areas for each sales manager and create a custom folder in each area with the sales manager pre-defined to limit queries but to simplify the maintenance I'd like to be able to limit the queries based on how the user logs into Discoverer. i.e. username 'ABC' logs in; view has logic to recognize 'ABC' as the username and automatically sets a condition to sales_manager='ABC'.
Is something like this doable with Discoverer? I know we can get the username via forms but didn't know if Discoverer offered this functionality too.Actually, what's been said is correct for database EULs.
However, for Apps-EULs, it is possible to determine the Oracle Apps user and/or the Oracle Apps responsibility that's presently logged in to Discoverer (requires an external routine to be registered but it's an Oracle one).
Then, if an Apps-EUL, you can limit the folder in the EUL to that responsibility, etc. in the same fashion as stated for the DB-EUL.
Note that some of the views in the database may indeed only show info for a particular apps user / responsibility, but these views are usually only the BIS views and if you look at the code to these views, it's obvious as one of the last lines will refer to a package such as: HR_Security_Pkg or GL_Security_Pkg.
However, if you're going straight to an Oracle table and it's an Apps-EUL, then what I mentions works - done it many times now. -
Error while calling the function which returns SQL Query!!!
Hi,
I have a Function which returns SQL query. I am calling this function in my APEX report region source.
The query is dynamic SQL and its size varies based on the dynamic "where clause" condition.
But I am not able to execute this function.It gives me the following error in APEX region source.
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Even in SQL* Plus or SQL developer also same error .
The length of my query is more than 4000. I tried changing the variable size which holds my query in the function.
Earlier it was
l_query varchar2(4000)
Now I changed to
l_query varchar2(32767).
Still it is throwing the same error.
Can anybody help me to resolve this.???
Thanks
AlakaHi Varad,
I am already using 32k of varchar2. Then also it is not working.
It is giving the same error. I think there is something to do with buffer size.
My query size is not more than 4200. Even if i give 32k of varchar2 also buffer is able to hold only 3997 size of the query only.
Error is
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Tried CLOB also. It is not working.
Any other solution for this.
Thanks
Alaka -
Using Package to produce pl/sql function body returning sql query Report
I have existing code that we want to use in building reports in APEX. We are needing to modify it slightly to handle some new requirements, but would like to use them in reports based upon SQL query (pl/sql function body returning sql query) functionality.
Any suggestions as how to call these in an APEX report region?
Thank you,
Tony Miller
UTMB/EHNHi Tony-
I am also v new to Apex and you may have answered a question I was in search of. I, however, now have a couple more. First a bit of background-- Like in your situation, my college has a lot of existing code (400 +) that we need to get into Apex. The majority of this canned code contains one/both: 1) many lines, sometimes containing multiple select statements 2) imbedded create table & view statements (temp user owned). Up until reading your post, I was unable to figure out an easy way of getting this existing code into the product. Thanks. Now the questions, do you know how I would go about dealing with the create tables/views. I've read some posts on this forum which suggest temporary tables being unstable in this environment. Also, do you know if there's a size limitation when passing sql code via a function?
As you may/may not be able to tell, I'm a bit lost right now... so any info you can provide would be appreciated. Thanks.
Don -
PL/SQL function body return sql query, no data found problem
Hi all,
we are trying to build a dynamic report based on item selection by user. we are using SQL Query (PL/SQL function body returning SQL query). However when a user change the item and submit the page . The following error appears.
ORA-01403: no data found.
our query is so simple
declare
l_query varchar2(30000) default 'select id from chw';
begin
if(:P11_PARA=1) then
l_query:='select name from chw';
end if;
return l_query;
end;
any quick help please.Hello Mike,
I tried it, the problem still exists.
ORA-01403: no data found
my new code is
declare
l_query varchar2(30000) default 'select id from chw';
begin
if (nvl(TO_NUMBER(:P11_PARA),0) = 1) then
l_query:='select name from chw';
end if;
return (l_query);
end;
note, there is no process in this page.
Edited by: M.Jabr on Oct 14, 2009 6:13 AM -
HI Experts,
I have Generated One Query based Report for Invoice Details
I have Generated that report in Last Years Posting Period now Posting Period Has Been Changed
Now if i will execute that report it will show correct data but while i will drill information from Invoice Number it will show previous years Documet.
But all the other tax details and amount is from Current Posting DatesHi
The archiving functionality is from the 8.8 version only.
But if in your query you display the DocEntry in side of the DocNum and use the link arrow at the DocEntry, it will go to the proper document.
Best regards
István Körö -
Return query based on condition
I'm trying to create a report region that returns results based on which table the data is stored. I'm using the type SQL Query(PL/SQL function body returning SQL query). I do a select to the first set of tables if the data is not there then it will do a select on the other set of tables. Each query will work find alone. But one query will not work when I use the condition IF Else return query.
Does anybody know how I can accomplish this?
Here is the Query:
declare
v_cnt number;
begin
select count(*) into v_cnt from image_repo_images im, image_repo_lookup il
where im.document_id_type = il.lookup_code
and il.lookup_type = 'DOCUMENT_TYPE'
and il.lookup_code = 1
and im.document_id = :P1_FILE_DLN;
if v_cnt > 0 then
return 'select distinct il.meaning, im.document_id, im.system_entry_date,im.batch_type,im.document_id_type
from image_repo_images im, image_repo_lookup il
where im.document_id = :P1_FILE_DLN
and im.document_id_type = il.lookup_code
and il.lookup_type = ''DOCUMENT_TYPE''
and il.lookup_code = 1;';
else
return 'select ''DLN'', dln, null e_date,null bt,null tp from income_tax_return_images where dln = :P1_FILE_DLN';
end if;
end;
Looks rather straight forward to me.
I get this error:
report error:
ORA-20001: Error fetching column value: ORA-01403: no data found
Any help will be appreciated.Does this work for you:
DECLARE
v_cnt NUMBER;
v_query VARCHAR2 (4000);
BEGIN
SELECT COUNT (*)
INTO v_cnt
FROM image_repo_images im, image_repo_lookup il
WHERE im.document_id_type = il.lookup_code
AND il.lookup_type = 'DOCUMENT_TYPE'
AND il.lookup_code = 1
AND im.document_id = :p1_file_dln;
IF v_cnt > 0
THEN
v_query :=
v_query
|| 'SELECT DISTINCT il.meaning, im.document_id,'
|| ' im.system_entry_date,im.batch_type,im.document_id_type'
|| ' FROM image_repo_images im, image_repo_lookup il'
|| ' WHERE im.document_id = :P1_FILE_DLN'
|| ' AND im.document_id_type = il.lookup_code'
|| ' AND il.lookup_type = ''DOCUMENT_TYPE'''
|| ' AND il.lookup_code = 1';
ELSE
v_query :=
v_query
|| 'SELECT ''DLN'', dln, null e_date,null bt,null tp '
|| ' FROM income_tax_return_images WHERE dln = :P1_FILE_DLN';
END IF;
RETURN v_query;
END;I think you have a semicolon too much at "...il.lookup_code = 1;"
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
Running Query Based on Condition
Hi
I want to run different query based on a condition. I am not able to execute the following query. is this the right way to run different query based on condition?
SELECT * FROM (
CASE WHEN (SELECT COUNT (*) from data1 where ID = 1 AND stype = 'A') > 0 THEN select * from data where ID = 1 AND stype = 'A'
WHEN (SELECT COUNT (*) from data1 where ID = 1 AND stype = 'B') > 0 THEN select * from data where ID = 1 AND stype = 'B'
WHEN (SELECT COUNT (*) from data1 where ID = 1 AND stype = 'C') > 0 THEN select * from data where ID = 1 AND stype = 'C'
END
) as a;
Edited by: user6016744 on 21 Apr, 2011 12:40 AMThis works for us; hope it helps.
CREATE OR REPLACE FUNCTION SCHEMA.GET_STEP_COST (loan_number_in in VARCHAR2, step_code_in in VARCHAR2 default null, ws_in in VARCHAR2 default null )
RETURN VARCHAR2 IS retval VARCHAR2 (50);
/*passing in loan number and step code you need the cost for, will return the cost*/
BEGIN
CASE ws_in --depending on workstation in is the table select
WHEN 'F' THEN
EXECUTE IMMEDIATE 'SELECT '|| step_code_in ||' FROM CLAIMS_FCL_STEPS WHERE LOAN_NUMBER = '|| loan_number_in ||'' INTO retval;
WHEN 'R' THEN
EXECUTE IMMEDIATE 'SELECT '|| step_code_in ||' FROM CLAIMS_RS_STEPS WHERE LOAN_NUMBER = '|| loan_number_in ||'' INTO retval;
WHEN 'L' THEN
EXECUTE IMMEDIATE 'SELECT '|| step_code_in ||' FROM CLAIMS_LM_STEPS WHERE LOAN_NUMBER = '|| loan_number_in ||'' INTO retval;
ELSE
retval := 0;
END CASE;
RETURN retval;
END GET_STEP_COST;
/
Maybe you are looking for
-
How do I get iCal to print my calendar just as it appears on the screen? I like the whole block-out method rather than just a line down the side indicating the time devoted to an event. Is there any way to change the style of how it' sprinted?
-
Open hyperlinks in a new window
Is there any possible way to have the hyperlinks in iWeb to open in a new window without having to use the control click? Thank you
-
Hello when i am trying to post the GR it's showing the error msg as "period 005/2011 is not open for account type M and G/L 304000 pls guide me Edited by: Csaba Szommer on May 22, 2011 3:12 PM
-
Hello, The requirement is, we have to integrate a portal say sdn with our portal. We have to implement SSO in this. Is there any encrypting mechanism available in EP6.0 before sending the userid and pwd? Kindly help. Regards, Rukmani
-
I tunes won't open on my computer
I tunes won't open