Game Programming Errors

I'm trying to make up a game program for a school progect, and I'm having some troubles with it.
I'm having multiple errors in the following areas: 1. Find symbol contructor/method. 2. Inconvertible types. 3. Jump[] in GameSrc.Player cannot be applied [boolean].

Well thats kinda general... In my opinion java is a great language. Just not for games usually. Also what kind of game? 2d or 3d? I would recommend checking out unity for 3D games. I have used it and it is a great tool for people looking to make 3D games without as much work. Plus it supports execution in a browser like an applet kindof. For 2D i usually use flash as it greatly simplifies the process. If your hearts set on Java start off with this- http://www.tutorialized.com/view/tutorial/2D-Java-Platform-Game/10145

Similar Messages

Warcraft III Program Error

Hey guys...im new here and i hope someone can help me.
I installed Warcraft III (Orignal CDs) with Wine with the Tutorial on ArchWiki.
But everytime i start the game, the normal window Appears which loads the game. And after a few seconds i get the Message:
Program Error
The program War3.exe has encountered a serious problem and needs to close. We are sorry for the inconvenience.
when i start the game in a terminal (tried with and without -opengl) i get this:
[XNight@myhost Warcraft III]$ wine War3.exe
err:ole:CoCreateInstance apartment not initialised
wine: Call from 0x7bc49230 to unimplemented function Storm.dll.570, aborting
wine: Unimplemented function Storm.dll.570 called at address 0x7bc49230 (thread 0009), starting debugger...
then i press the Close Window on the window which appeared:
Unhandled exception: unimplemented function Storm.dll.570 called in 32-bit code (0x7bc49230).
Register dump:
CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b
EIP:7bc49230 ESP:0033fbc0 EBP:0033fc24 EFLAGS:00200206( - -- I - -P- )
EAX:0000023a EBX:7bc9c784 ECX:0033fc44 EDX:0000005c
ESI:0033fbcc EDI:7b850050
Stack dump:
0x0033fbc0: 00000104 0033fbe8 7b88482c 80000100
0x0033fbd0: 00000001 00000000 7bc49230 00000002
0x0033fbe0: 0044ce3e 0000023a 00000026 7b88482c
0x0033fbf0: 0015bf28 0033fc24 7b84f796 00110000
0x0033fc00: 00000000 0015bf28 00000104 00002710
0x0033fc10: 00000000 0033fc48 7b850160 7b850160
Backtrace:
=>0 0x7bc49230 call_dll_entry_point+0x620() in ntdll (0x0033fc24)
1 0x0034000f (0x0033fd48)
2 0x00401219 in war3 (+0x1218) (0x0033fdf4)
3 0x00401d68 in war3 (+0x1d67) (0x0033fe90)
4 0x7b85580c call_process_entry+0xb() in kernel32 (0x0033fea8)
5 0x7b85644f ExitProcess+0xc3e() in kernel32 (0x0033fee8)
6 0x7bc6ff00 call_thread_func+0xb() in ntdll (0x0033fef8)
7 0x7bc72a00 call_thread_entry_point+0x6f() in ntdll (0x0033ffc8)
8 0x7bc4926a call_dll_entry_point+0x659() in ntdll (0x0033ffe8)
0x7bc49230 call_dll_entry_point+0x620 in ntdll: subl $4,%esp
Modules:
Module Address Debug info Name (105 modules)
PE 400000- 46d738 Export war3
PE 15000000-15064000 Deferred storm
PE 21100000-2115f000 Deferred mss32
PE 60000000-6005d000 Deferred ijl15
PE 6f000000-6f878000 Deferred game
ELF 7b800000-7b97f000 Export kernel32<elf>
\-PE 7b810000-7b97f000 \ kernel32
ELF 7bc00000-7bcb9000 Export ntdll<elf>
\-PE 7bc10000-7bcb9000 \ ntdll
ELF 7bf00000-7bf03000 Deferred <wine-loader>
ELF 7c5cc000-7d30c000 Deferred libglcore.so.1
ELF 7d8ad000-7d8af000 Deferred libnvidia-tls.so.1
ELF 7d8af000-7d953000 Deferred libgl.so.1
ELF 7d953000-7da05000 Deferred opengl32<elf>
\-PE 7d970000-7da05000 \ opengl32
ELF 7da05000-7da0e000 Deferred librt.so.1
ELF 7da0e000-7da4b000 Deferred libdbus-1.so.3
ELF 7da4b000-7da4e000 Deferred libssp.so.0
ELF 7da4e000-7da5e000 Deferred libtasn1.so.3
ELF 7da5e000-7dadf000 Deferred libsqlite3.so.0
ELF 7dadf000-7daee000 Deferred libavahi-client.so.3
ELF 7daee000-7daf9000 Deferred libavahi-common.so.3
ELF 7daf9000-7dafd000 Deferred libgpg-error.so.0
ELF 7dafd000-7db70000 Deferred libgcrypt.so.11
ELF 7db70000-7dc07000 Deferred libgnutls.so.26
ELF 7dc07000-7dc1c000 Deferred libresolv.so.2
ELF 7dc1c000-7dc4d000 Deferred libcrypt.so.1
ELF 7dc4d000-7dc5f000 Deferred libroken.so.18
ELF 7dc5f000-7dc87000 Deferred libwind.so.0
ELF 7dc87000-7dd0c000 Deferred libasn1.so.8
ELF 7dd0c000-7de86000 Deferred libcrypto.so.1.0.0
ELF 7de86000-7dec2000 Deferred libhx509.so.5
ELF 7dec2000-7df2b000 Deferred libkrb5.so.26
ELF 7df2b000-7df30000 Deferred libheimntlm.so.0
ELF 7df30000-7df5e000 Deferred libgssapi.so.2
ELF 7df5e000-7dfa7000 Deferred libcups.so.2
ELF 7dff4000-7e067000 Deferred rpcrt4<elf>
\-PE 7e000000-7e067000 \ rpcrt4
ELF 7e067000-7e166000 Deferred ole32<elf>
\-PE 7e080000-7e166000 \ ole32
ELF 7e17c000-7e1af000 Deferred uxtheme<elf>
\-PE 7e180000-7e1af000 \ uxtheme
ELF 7e1af000-7e1b4000 Deferred libxfixes.so.3
ELF 7e1b4000-7e1bd000 Deferred libxcursor.so.1
ELF 7e1bd000-7e1c0000 Deferred libxcomposite.so.1
ELF 7e1c0000-7e1c7000 Deferred libxrandr.so.2
ELF 7e1c7000-7e1cf000 Deferred libxrender.so.1
ELF 7e1cf000-7e1d4000 Deferred libxxf86vm.so.1
ELF 7e1d4000-7e1ec000 Deferred libxcb.so.1
ELF 7e1ec000-7e203000 Deferred libice.so.6
ELF 7e203000-7e31d000 Deferred libx11.so.6
ELF 7e31d000-7e32b000 Deferred libxext.so.6
ELF 7e32d000-7e330000 Deferred libcom_err.so.2
ELF 7e34a000-7e3f0000 Deferred winex11<elf>
\-PE 7e360000-7e3f0000 \ winex11
ELF 7e48f000-7e4b5000 Deferred libexpat.so.1
ELF 7e4b5000-7e4e3000 Deferred libfontconfig.so.1
ELF 7e4e3000-7e568000 Deferred libfreetype.so.6
ELF 7e568000-7e58a000 Deferred mpr<elf>
\-PE 7e570000-7e58a000 \ mpr
ELF 7e58a000-7e59f000 Deferred libz.so.1
ELF 7e59f000-7e5a2000 Deferred libxinerama.so.1
ELF 7e5a2000-7e5a7000 Deferred libxdmcp.so.6
ELF 7e5a7000-7e5ae000 Deferred libsm.so.6
ELF 7e5be000-7e61c000 Deferred wininet<elf>
\-PE 7e5d0000-7e61c000 \ wininet
ELF 7e61c000-7e63c000 Deferred imm32<elf>
\-PE 7e620000-7e63c000 \ imm32
ELF 7e63c000-7e65c000 Deferred iphlpapi<elf>
\-PE 7e640000-7e65c000 \ iphlpapi
ELF 7e65c000-7e68a000 Deferred ws2_32<elf>
\-PE 7e660000-7e68a000 \ ws2_32
ELF 7e68a000-7e6a4000 Deferred wsock32<elf>
\-PE 7e690000-7e6a4000 \ wsock32
ELF 7e6a4000-7e727000 Deferred msvcrt<elf>
\-PE 7e6b0000-7e727000 \ msvcrt
ELF 7e727000-7e7bb000 Deferred winmm<elf>
\-PE 7e730000-7e7bb000 \ winmm
ELF 7e7bb000-7e7f2000 Deferred winspool<elf>
\-PE 7e7c0000-7e7f2000 \ winspool
ELF 7e7f2000-7e8e1000 Deferred comctl32<elf>
\-PE 7e800000-7e8e1000 \ comctl32
ELF 7e8e1000-7e942000 Deferred shlwapi<elf>
\-PE 7e8f0000-7e942000 \ shlwapi
ELF 7e942000-7eb30000 Deferred shell32<elf>
\-PE 7e950000-7eb30000 \ shell32
ELF 7eb30000-7ebf1000 Deferred comdlg32<elf>
\-PE 7eb40000-7ebf1000 \ comdlg32
ELF 7ebf1000-7ec4b000 Deferred advapi32<elf>
\-PE 7ec00000-7ec4b000 \ advapi32
ELF 7ec4b000-7ecd7000 Deferred gdi32<elf>
\-PE 7ec60000-7ecd7000 \ gdi32
ELF 7ecd7000-7ee09000 Deferred user32<elf>
\-PE 7ecf0000-7ee09000 \ user32
ELF 7efbc000-7efe1000 Deferred libm.so.6
ELF 7efe8000-7f000000 Deferred version<elf>
\-PE 7eff0000-7f000000 \ version
ELF b75c1000-b75c5000 Deferred libuuid.so.1
ELF b75c7000-b75cb000 Deferred libdl.so.2
ELF b75cb000-b7716000 Deferred libc.so.6
ELF b7716000-b7730000 Deferred libpthread.so.0
ELF b7740000-b7743000 Deferred libxau.so.6
ELF b7743000-b774f000 Deferred libnss_files.so.2
ELF b774f000-b788f000 Export libwine.so.1
ELF b7890000-b78ae000 Deferred ld-linux.so.2
Threads:
process tid prio (all id:s are in hex)
00000008 (D) C:\Program Files\Warcraft III\War3.exe
00000009 0 <==
0000000e services.exe
00000016 0
00000015 0
00000014 0
00000010 0
0000000f 0
00000011 winedevice.exe
00000017 0
00000013 0
00000012 0
00000018 explorer.exe
00000019 0
Backtrace:
=>0 0x7bc49230 call_dll_entry_point+0x620() in ntdll (0x0033fc24)
1 0x0034000f (0x0033fd48)
2 0x00401219 in war3 (+0x1218) (0x0033fdf4)
3 0x00401d68 in war3 (+0x1d67) (0x0033fe90)
4 0x7b85580c call_process_entry+0xb() in kernel32 (0x0033fea8)
5 0x7b85644f ExitProcess+0xc3e() in kernel32 (0x0033fee8)
6 0x7bc6ff00 call_thread_func+0xb() in ntdll (0x0033fef8)
7 0x7bc72a00 call_thread_entry_point+0x6f() in ntdll (0x0033ffc8)
8 0x7bc4926a call_dll_entry_point+0x659() in ntdll (0x0033ffe8)
wine: Call from 0x7bc49230 to unimplemented function Storm.dll.570, aborting
wine: Call from 0x7bc49230 to unimplemented function Storm.dll.570, aborting
[moritz@myhost Warcraft III]$
Thanks for help!
Some Infos:
-newest version of Wine
-Nvidia fx5500 with nvidia-173xx
It worked perfectly on all ubuntus (I tested 9.04 to 10.10)

Ubuntu's universe repository for their latest release contains wine 1.2, but Arch's currently has 1.3.6. Maybe the newer version introduced a regression that affects Warcraft III. Have you tried patching the game to its latest version? Check the wine appdb page for Warcraft III and see if there's anything else that can help. You might also try to install wine 1.2.1—there is at least one PKGBUILD for it in the AUR.
I own a copy of the game, but it currently sits in storage elsewhere; if I can grab it, maybe I'll try to install it too.

Sudden attack program error on ge70 2pe

when i start the game, it pop up the program error and cannot play ... how to fix it???

There are some people talking about the same problem.
Give it a try for the solution:https://www.youtube.com/watch?v=kyUErAJ3KRU

Error: "Could not complete your request because of a program error" (photoshop CS2 9.0.2 on MAC OSX

Today I started my program (photoshop CS2 9.0.2) and opened a JPG file. When I went to print the file the program crashed and closed. When I restarted the program and went to open the file I got this error message, "Could not complete your request because of a program error".
I have tried several different file types/sizes and all result in the same error message since the program crashed. It will not open any file I try to open. As I indicated above I am using Photoshop CS2 9.0.2 it is on a MAC with OSX 10.4.11.
I called Adobe and the Rep directed me to Tech Note 331307 and told me to Re-create the Photoshop preferences files. Which I did and restarted the program, but when I tried to open a file (any file) I still get the same error message so it doesn't appear to be the preferences.
Does anyone have any info as to what the problem may be and how to correct it.
Thanks

Thanks for the response. OK... This is the first day I have been able to get back to the problem.
My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
Again thanks for taking the time to respond to this issue.

Photoshop CS2 (program error msg)... Help please!!

I have installed the full creative suite 2 on my new iMac. everything works fine except photoshop?!!?
Illustrator works great, In-Design works great, But when i try to open a file or create a new page in PS it tells me "Could not create document because of a program error"???? ***?
I had a previous version of CS and it worked fine for one day, then that started happening. I installed the CS2 trial version, and it would still give me the same error msg. I erased everything and installed the new CS2 (photoshop, illustrator , in-design and acrobat). It still gives me the same darn msg.???
Any help would be greatly appreciated!
thanks

See the Adobe Knowledge Base document"Error 'Could not complete your request...' or 'Could not create a new document...' (Photoshop CS2 on Mac OS X v10.4)"
I suggest whenever you have problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
The document cited above was found in 10 seconds by searching the Adobe support site.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

PhotoShop CS2 "Program Error" when printing

I am posting this to the Adobe Forums as well, but thought someone here might have some ideas. am having an intermittent problem printing from PhotoShop CS2 to an Epson 9800. When printing large files (200 MB average) to the Epson, PhotoShop will spool the job, taking about 50% longer than normal, and when complete, displays the following message..."The file XXXX.tif could not be printed because of a program error" No job ever gets to the print que. This happens about 80% of the time when printing. Quitting and restarting PhotoShop generally fixes the problem, and the file can be printed from another computer without issue, so this is not file specific. I have 8GB of RAM installed and PhotoShop running under 100% available memory, cache level at 8, with a dedicated 180GB scratch disk. Memory should NOT be the problem, though I do often have the full layered version of the file open in the background (I am printing from a flattened copy. I have observed that the problem is less likely to occur if no other files are open. I have a second G5 with the exact same software setup (OS, Print Driver and PhotoShop down to the decimal version #) that works perfectly every time. I have run all of the System utilities (Repair Permissions, FSCK, etc), reset the OSX printing system, reset PS preferences, trashed and re installed CS, as well as the Epson printer driver, all with no success. Any other trouble shooting ideas would be greatly appreciated. I would love to avoid a System reinstall.

See the Adobe Knowledge Base document"Error 'Could not complete your request...' or 'Could not create a new document...' (Photoshop CS2 on Mac OS X v10.4)"
I suggest whenever you have problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
The document cited above was found in 10 seconds by searching the Adobe support site.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

ESYU: ENCOIN: ECO Open Interface Program 사용시 error 발생 문제

Purpose
Oracle Engineering - Version: 11.5.6
ECOs import를 위해 ECO Open Interface(ENCOIN module)을 사용할 때,
Interface program이 아래와 같은 error를 발생시킨다.
"ORACLE error 6550 in FDPSTP
Cause: FDPSTP failed due to ORA-06550: line 1, column 7:
PLS-00201: identifier 'ENG_LAUNCH_ECO_OI_PK.ENG_LAUNCH_IMPORT' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored"
어떻게 ENCOIN: ECO Open Interface program을 사용해야 하는지 알아본다.
Solution
ECOs를 importing 하기 위해 ECO open interface를 사용하는 것은 권장하지도 않고,
support 되지도 않는다.
ECO data를 load 하기 위해 ECO open interface를 사용하는 대신 ECO Business Object
이나 ECO form을 사용해야 한다.
ECO Business Object 사용에 대한 보다 상세한 내용은 Manufacturing and Open Interfaces
Manual을 참조한다.
또한 Note 132874.1에 설명되어져 있는 ECOBOI module을 이용하도록 한다.
만일 당신의 application version이 11.5.9 이상이라면 ENCOIN module(ECO Open Interface)는
ECO details를 import 하기 위해 사용될 수 있고, ENCOIN은 11.5.9 이상의 version에서만
지원이 된다.
Reference
Note 392011.1

"Program Error" While trying to print in PSE 9

Download and installed updates to PSE 9.0, Now 9.03. While in PSE mode I can no longer print images to Epson Photo R2880 or HP J4680. I can print to both printers using HP Media Smart Photo application, but if I attempt to print from PS Elements I get the following "could not print (image title) because of program error". I have since uninstalled the upgrade to PSE 9.03, I have also done a system restore all to no avail. I still can't print while in PSE. Any experience with this? Any resolution ? Help !!!

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Photoshop CS2 not working after 10.6.7 update? program error!

Could not complete your request because of a program error. I opened an image RGB and wanted to save it as a CMYK.
Save as and entered new name... thats it! Then the error popped up. The only thing that has changed is the update!
Please help.

If you updated to 10.6.7 then you should (go to your Apple menu at the far left and) check for updates.
There was a problem with some types of Fonts that has been fixed by the Snow Leopard Font update:
http://support.apple.com/kb/DL1377
However, always wait after an OS update (true of Windows too) and see if it causes any problems with 3rd-party software, etc. - PRIOR to updating your system And always, always have a full, known-good backup before you update. Especially for any computer that is used for business purposes !
Last but definitely not least, you should know that Adobe CS2 is a Power-PC only application (circa G4 and G5 processors, before Apple moved to Intel processors), and requires Rosetta (PowerPC emulation).
So you should consider any CS2 application running at all, as fairly miraculous.
CS3 was released four years ago, and provided the first Intel-native ("Universal Binary") versions of the CS-suite applications.
Mac OS 10.6 only runs on Intel-based Macs (ie: Intel processor required).
If you are using Photoshop CS2 for any revenue-generating purposes, then it is (and was) incumbent upon you to properly allocate and budget for
upgrades and you should - nay, must - be running a more current version of the software. If your budget does not allow for newer Adobe CS, then you should have kept a legacy system that can run an older Mac OS, and understand that your workflow is living on borrowed time - and you had best keep several old Macs that can still run an older Mac OS and run your CS2 natively.
In no way shape or form is CS2 supported under Mac OS X 10.6 - certainly not in any official way by Adobe !
You could also be irate about not being able to use your 8-track tape player in your brand new car. I'm exaggerating but not too much.
Please read Adobe's response regarding CS3 (not CS2) and 10.6/Snow Leopard:
http://blogs.adobe.com/jnack/2009/08/adobe_snow_leopard_faq.html
With all of this in mind, you should know that your frustrations with Apple and the unsupported and not-recommended interaction of CS2 and 10.6 are misguided. Best of luck to you !

"Program error" When I click on the timeline/motion controls or try to export/save as my animation. PS CC late 2014

I have been working on an animation for an online ad. The file is 300 by 250. It's about 24 seconds long. I had completed and saved my work as a GIF file. I also saved some static JPGs of the animation. Everything was still working at this point. Then I closed Photoshop and reopened the PSD file to export it to a different format, but when I clicked on the time-marker in the timeline window or tried to edit my animation, I got this error message: "could not complete your request because of a program error." Watch the following video to see exactly what happens:
I'm running Adobe Photoshop CC November 2014. I'm working on a PSD file, 24 seconds long, 30 fps.
I looked in my library/preferances/adobe folder for photoshop's error log file. This is the error in that file:
2014:11:12 18:30:17 : /Volumes/workarea/PS_15_Mac_Daily_Retail/20140730.r.148/photoshop/main/photoshop/sources/ ULinkManager.cpp : 1380 : REQUIRE failed
Thank you so much for reading this. It sucks to work so long on an ad and then have this happen for seemingly no reason. Please help if you can.

Looks like issues with some linked smart objects... You could try and copy/ move the whole shebang to another location in the hopes that it either fixes the issue or PS completely forgets the linked files completely so you might relink/ replace them.
Mylenium

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

I keep getting a message saying "Could not complete your request because of a program error"

I keep getting a message saying ( Could not complete your request because of a program error??
Does anyone know what this means or how to fix?

blucoast,
Can you please be more detailed? When are you getting this - what is causing it? Any specific tool or while starting Photoshop itself?
Do you see an error number or error code or a report? Can you post that here?

Effects not working? "Could not complete your request because of a program error?"

Hey guys&gals - I have always had this problem when working in RGB/CYMK modes - can anyone help me with that?
More more importantly, now I am getting in in Grayscale mode as of this morning.
I run Photoshop 6 V 13.1.2 x64 and just updated it this AM.
Effects are crucial for my job, so I need this fixed asap!!
I have tried the ctrl, alt, shift start up to no avail. Restarted, shutdown my PC as well.
Please advise!
Thanks,
blaqgranitelaser

Found the places I was supposed to - now what? Photoshop isn't crashing... doesn't give me any info other than a box saying "Could not complete your request because of a program error." And I have no choice but to click OK. This only happens when I try to use the layer effects in any color mode. Originally it was only in RGB/CMYK but now also happens in Grayscale.
I'm not technologically savvy - I know what programs I use, but that is all.

Can't open file: "Could not complete your request because of a program error"

I have a Photoshop file that suddenly won't open. Last week I upgraded to CS5--the file had been created in CS3 prior to that. When I try to open it, I receive this error message (in CS5): "Could not complete your request because of a program error." I tried to open the same file in CS3; there, the file opens, but as soon as I try to do anything I get the same error message....which, annoyingly, re-appears the second I click "OK," so the only thing I can do in CS3 is force-quit.
I've used Time Machine to retrieve versions of the file that were saved four days ago, seven days, and several weeks ago, and I get the same message every time. Even on versions that were last saved with CS3 (before I installed CS5).
Naturally, this is one of the most important files in my life right now....it's a 300 MB file that contains hundreds of layers and dozens of comps. So the fact that I suddenly can't open it, after shelling out $1200 to upgrade to the latest and greatest Adobe has to offer, is, to say the least, distressing.
Any advice will be appreciated.
Thanks,
TheWocky

First thing I would do is investigate hard drive issues and the health of the OS.

Cannot open files ~ Could not complete your request because of a program error

I can inly open 3 files and then I get this error message ~ Could not complete your request because of a program error
Please help, I am in the middle or a project ...
Thank you,
Linda

There is likely a font on that system that's corrupted or for some reason Photoshop just can't deal with. Fonts are complex things, and it's well known that bad fonts can crash applications.
Ferreting out such a font is normally a matter of removing all but the default fonts, seeing that the problem is corrected, then adding the fonts back in systematically until the offender is isolated. Yes, this can be tedious.
If it's not a font problem, there's a possibility it's a display driver problem. To help diagnose that, go into Edit - Preferences - Performance, disable OpenGL Drawing, then restart Photoshop. If the problem goes away, you'll want to check the web site of the maker of the video card for driver updates. Don't forget to re-enable OpenGL Drawing again after updating the driver.
Good luck.
-Noel

Game Programming Errors

Similar Messages

Maybe you are looking for