Gateway service not shown in Service Catalog

I successfully created my first Service using service builder in gateway, and values are also shown in the browser. But when creating a new starter application project in Eclipse , the service is not shown in the service catalog.
Why does this happen ?

Hi , this partially resolved the issue. to generate the project using GWPA.
But when running the project (UI5 , a starter application project) an error occured as in screenshot.
But data is coming in browser
Debugging the error Logs in IWFND/ERROR_LOGS found
system alias does not exist and
Missing customizing; contact your system administrator.
I had checked various SCN blogs on same Error , but could nt get much information. ( Data is coming in browser , but cannot connect from my application)

Similar Messages

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

Files not shown in main catalog

Why does my main catalog say that there are 17 files not shown? There are no hidden files.

Thank you Brett; I have several files in stacks. I am new to Photoshop and still learning the program.

ADF-BC not shown as fact type when decision service invoked as webservice

Hello,
I'm new to OBR.
I have included 2 adf-bc fact types in my project (EmployeeView & Department View)
Once the rule is created i get the error stating.
RUL-05162 : The rule set "Ruleset1" requires fact type "EmployeeView", but this type is not part of the input.
RUL:05164: The fact type "EmployeeView" is referenced, but is not asserted not input.
So when i try including as input in the decision service, which is invoked as the webservice, the 'EmployeeView" is not shown in "FactType" drop down. When I uncheck "Will be invoked as webservice" checkbox, the EmployeeView is shown in the "Fact type" drop down in the 'Edit decision function' window.
How to include the ADF-BC fact type, given the decision service is invoked as webservice and xml schema is given as input.
Thanks in advance.

you have to introduce a complexType in the xsd.. like
<xs:element name="name">
<xs:complexType>
    <xs:sequence>
      <xs:element name="attributeId" type="xs:string"/>
    </xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="description">
<xs:complexType>
    <xs:sequence>
      <xs:element name="attributeId" type="xs:string"/>
    </xs:sequence>
</xs:complexType>
</xs:element>refer this for more info
http://www.w3schools.com/schema/

Package working fine in SSDT but not in integration services catalog or sql job

Hi All
we have created a package which contains Project parameter , when we tried to run the package in SSDT it is working fine . we deployed the project to sql server and we want to test the package . we executed the package ( for testing purpose
we didnt refrenced Project parameter to any env variable ) from integration services catalog the package is getting success but the files are not moving ( deserved task in package ) , so i have created a job and run the package from the job ,, here
the files moved from stage 1 and stage 2 but from there it is not moving . do we missed any steps ?
Surendra Thota

Hi All
we have created a package which contains Project parameter , when we tried to run the package in SSDT it is working fine . we deployed the project to sql server and we want to test the package . we executed the package ( for testing purpose
we didnt refrenced Project parameter to any env variable ) from integration services catalog the package is getting success but the files are not moving ( deserved task in package ) , so i have created a job and run the package from the job ,, here
the files moved from stage 1 and stage 2 but from there it is not moving . do we missed any steps ?
Surendra Thota

Service working fine in Gateway but not in browser

Hi All,
I have a gateway service which is working fine in Development system but after transporting to Quality system, it is not working on browser.
It is running perfectly in Quality gateway system but on browser it's throwing error:
Model '' contains errors. Contact Adminstrator
I am not even able to open metadata on browser.
Please advise.
Thanks.

Hello Satya,
The error is saying your model contains error, that means there is some problem with ur data model.
But u also say that it works in GW Client and not in browser.
Please try the below and check:
1. Please make sure that the host and the port used are correct in browser. Get Host and Port info from GW Client and use accordingly.
2. Clear your browser cache as well.
3. Clear your model cache and try. Go to t-code /iwfnd/cache_cleanup and clear the cache and check again from browser.
Regards,
Ashwin

Easy Query not appearing in Gateway Service Builder

Hi,
I am working on SAP HCM MSS Analytics lane which gets data from Easy Queries via Gateway Service. We are using ODP framework and required ODP configuration mentioned in SAP documents is maintained. I have installed Bex Query Designer ( based on 7.3 Sp 06 Revision 724 ) .
I am trying to create easy query and build gateway Service for that in ECC. I am able to open ODP query and change it property in Extended tab to "By Easy Query" but when I redefine service for BW Query in SEGW I do not see any easy query showing for RFC of ECC . In query designer message says successfully created , I even created simple query from info area of ODP , even then no success .
All configuration mentioned in documentation for Easy Query is maintained. Any suggestions would be of great help!

Hi,
I have the same problem, Please Could you solve it?,
Regards,
Johnny

Using SSRS Date Range- Data Not shown for date greater than by Analysis Services

Hello Friends,
I am using Date Range filters(Start and End Date) in my SSRS Report. The Problem is that if i am using the start date will be today, then the end date will be the future date by using Analysis Service as my Data Source, the report is not generated.
I don't know why it happens? If I give the date range filters before the current date, then the report will shown.
The problem is that the future date is not in my database. Could you please answer for this. I am struck in here,.
Table contains : 1-7-14 ,
2-7-14,
3-7-14,
If my Date Range will be 1st to 3 of 7th month, then the report shows the data.
if my date starts with 1st of the 7th month and ends in the future, then the report will not shown the 2nd and 3rd records...
Please teach me why?

Your question should be posted to the appropriate MSDN forum. This forum is for questions regarding Microsoft Certifications.

ORA-12154: TNS:could not resolve the connect identifier specified Error in Integration Service Catalogs

Hi guys,
I tried to execute a package with Oracle Data Source from Integration Services Catalogs and I got the following error.
ORA-12154: TNS:could not resolve the connect identifier specified
The package runs fine from the SSIS project but once I deploy to SSIS Catalog it fails to run. I need help!
Thanks
me

Hello ,
The ORA-12154 is a very common error, always related to your local copy of the tnsnames.ora file, your listener configuration and your database name aliases.
Make sure that your listener is listening for the same service name that you are using.
Your service name might have an alias, so check for global (world) entries and local entries. Check:
$ORACLE_HOME/network/admin/tnsnames.ora
Check your global_name setting with this SQL:
select * from global_name;
Ref :
http://www.dba-oracle.com/t_ora_12154_tns_resolve_service_name.htm
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

SSIS 2012: Integration Services Catalog not showing data for most recent executions

Techies--
Under a previous deployment of an SSIS package, I was able to go to the Integration Services Catalog, look under the folder-->project--> package then right click and request a standard report for all executions. The report would display
the execution details.
Today a colleague recently deployed a newer version of the same package to a test server... which is failing from a job set up via sql agent. I went to look at the root cause by going to the Integration Services Catalog to review the report. No execution
data appears. I looked at the filter--compared it to the filter I have set on the production copy of the stable version. The folder name, package name and project name match. Both have a status of 'All'. The date range is the same (2/19 - 2/25).
In fact, I went back to the test deployment and changed the date range to the date of the last failure (1/30). Now I see data only from 1/30 but none for today's execution.
Something must have happened in the deployment process--but what? How do I debug this issue with the reports--but even more importantly, how do I get to the raw execution data to see what the story is on the failed execution itself?

@Arthur, thanks for responding. In a nutshell, I searched through the ssisdb.catalog.event_messages table to determine roughly the same thing you determined--an execution for that package (or for that matter, any misnamed package) with today's timestamp
simply never occurred--even though the job agent log appeared to indicate it had.
I re-deployed the package ... forced an execution with an interactive run from the catalog... and viola! The execution info appeared through the standard reports as expected.
Any idea where I could/should look for a wayward deployment? (BTW, the report for validations showed no data either on that first deployment).

MDM catalog Search UI is showing SRM-MDM Service catalog instead of Product

Hi Experts,
We are working on SRM7.0 with MDM. We have one Development environment where MDM is working fine.
We made a copy of Existing MDM repository to new Server and Created new SRM-MDM environment for demo setup.
We have nade SRM instance as a copy of Development and when we try to connect to the MDM after making all changes to the search ui as same as Development we are getting search UI page of catalog as SRM-MDM Service catalog instead of SRM-MDM Product catalog.
I can able to acess the new repository through MDM Data manager it is fine.
The products in repository are not displayed in search ui page as only service view of catalog is shown.
Kindly reply if you have any idea or sugession.
Regards,
B.N.Karthikeyan.

Hi,
Login into the SRM -MDM repository ---> Go to General configuration settings --> select tab 'General'
On default 'Service' radio button will be seected change the the radio button to the ''Product' and save. Catalog will work as Product catalog.
Regards,
Chandolu Ramesh

Ask the Expert: Overview of Cisco Prime Service Catalog and Process Orchestrator Solutions

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
Jason is a subject matter expert with the following products and features:
Cisco Prime LAN management solution
Cisco Prime infrastructure
CiscoSecure ACS
Cisco Prime Network Registrar
Cisco Process Orchestrator
Cisco Prime Service Catalog
Cisco IP SLA
Embedded Event Manager
SNMPv3
onePK and OpenFlow
Cisco UCS
Device instrumentation
VMware ESX, ESXi, and vCenter
ITIL
Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
Remember to use the rating system to let Jason know if you have received an adequate response.
Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Jason,
Thank you very much for welcoming me to your expert discussion :) I feel to be in the right place, at the right time. Thank you also for answering question beyond your scope here, much appreciated. The information received will help me to go further as such I have submitted a 5 start rating for your first reply.
That sounds promising about the LMS part so yes, I stay tuned and wait patiently.
Ok, now let’s revert to the actual topic discussed here. Cisco Prime Service Catalog and Process Orchestrator solutions I have briefly read up on this on CCO (where elseJ) and picked out the following quote
---- Quote from the Cisco Prime Service Catalog Data Sheet
Today’s end users want self-service and easy access to IT tools and services.
Simultaneously, organizations are seeking ways to extend their cloud management
platforms beyond self-service delivery of virtual machines and infrastructure resources
while increasing their use of cloud-based solutions to enhance business agility and effectiveness.
Cisco Prime™ Service Catalog offers tremendous benefits to organizations that want to unify the ways in
which all types of IT services are ordered and fulfilled, not just infrastructure requests
---- un quote ---
I try to understand what (at high level of course) happens in the back ground when an order is raised and which vendor solution your product can interact with.
As mentioned in the quoted text, this service catalogue goes beyond the standard infrastructure.
Let’s say, a user wants to deploy a new email services, or in your example, extends or create a new web-portal (i.e. for HR to view and manage holiday, staff absence and benefits).
Your solution will need to interact somehow with the 3rd party vendor application that is capable building such portal I believe.
Without disclosing to many information, I assume the portal is linked to backend VM,s that spin up requested resources (and more magic of course). Perhaps I am mixing this up with another cisco product where a user can go on the portal and spin up virtual Firewalls, virtual Routers can be provisioned in now time.
Out if interest; Is this product also known as Mozart? (project code within Cisco?)
I hope query is ok.
Best wishes
Markus

PO creation from EXCEL uploaded by a Gateway Service in UI5

Hi,
The business requirement is to create Purchase Order from Excel File, uploaded from the UI5 application and call Gateway Service to create PO in SAP ECC.
I am trying to achieve this with CREATE_STREAM method of DPC.
However, my concern here is that I get the STREAMed data in XSTRING format and I am having difficulty in converting the XSTRING back to the EXCEL format.
Am I following the right technique to achieve this or is there any better way to achieve this requirement in Net Weaver Gateway?

Hello,
I did a test for uploading .xlsx file to UI5 APP and save the XSTRING data in db table in DPC( CREATE_STREAM), then read the content of table in DPC (GET_STREAM) .
In transaction code: '/n/iwfnd/gw_client' , click 'Response in Browser' button, the content can be read correctly and displayed in Excel, therefore I think the XSTRING data saved in db table is correct and can be converted to Excel data.
But when I using function 'HR_KR_XSTRING_TO_STRING' to convert XSTRING data to STRING data, the converted result could not be read correctly.
So there maybe another function can be used to read the content of XSTRING correctly,but I not found it.
Thanks!
Daniel

Oracle 8i Gateway Service problem for MS SQL Server 7.0

I am installing Oracle Gateway services of oracle 8.1.7 with MS SQL Server 7.0 and want to create gateway service to access SQL Server. At some point Oracle document says :
AT the MS-DOS prompt, enter:
SET GTW_EXE = TGMSQL80.EXETo create a new gateway service name, enter:
GTWSRV80 sid -CREATEI have complete Oracle 8.1.7 Release 3 pack but could not find the GTWSRV80 executable, I also do not have TGMSQL80.EXE. From where I can have these executables.
Would some one provide solution for this problem please.
Thanks and regards,
Ghulam

I am installing Oracle Gateway services of oracle 8.1.7 with MS SQL Server 7.0 and want to create gateway service to access SQL Server. At some point Oracle document says :
AT the MS-DOS prompt, enter:
SET GTW_EXE = TGMSQL80.EXETo create a new gateway service name, enter:
GTWSRV80 sid -CREATEI have complete Oracle 8.1.7 Release 3 pack but could not find the GTWSRV80 executable, I also do not have TGMSQL80.EXE. From where I can have these executables.
Would some one provide solution for this problem please.
Thanks and regards,
Ghulam

SAP.m JS/XML and Gateway service

Hello
I've been trying to consume a gateway service with the sap.m classes.
it turned out quite difficult for me as im new in this whole web thing, and most of the examples for sap.m are in XML.
i've tried to convert some of the examples in sap.common to sap.m but couldnt really figure it out.
my XML project returns the error:FlightsSet' refers to an entity set and not to a single entity
flightset is an entity in my gateway service.
my oninit function looks like this:
onInit: function() {
var oModel = new sap.ui.model.odata.ODataModel("proxy/http/serveradress:8000/sap/opu/odata/sap/ZS_ELI_FLIGHT_PROJECT_SRV", false, 'user', 'pass', null);
    this.getView().setModel(oModel);
the xml:
<mvc:View
controllerName="flightproject.TableView"
xmlns:l="sap.ui.layout"
xmlns:mvc="sap.ui.core.mvc"
xmlns="sap.m">
<Table id="idProductsTable"
    inset="false"
    items="{
      path: '/FlightsSet'
    }">
    <headerToolbar>
      <Toolbar>
        <Label text="Products"></Label>
      </Toolbar>
    </headerToolbar>
    <columns>
      <Column
        width="12em">
        <Label text="Flight company" />
      </Column>
      <Column
        minScreenWidth="Tablet"
        demandPopin="true">
        <Label text="Flight ID" />
      </Column>
    </columns>
    <items>
      <ColumnListItem>
        <cells>
          <ObjectIdentifier
            title="{Connid}"
            text="{Carrid}" />
          <Text
            text="{CITYFROM}" />
        </cells>
      </ColumnListItem>
    </items>
</Table>
</mvc:View>
am i doing something wrong? thanks

Hi Lavanya,
If you are planning to use the TCP/IP destination on the SAP system in Register mode, then a siebel application has to register at the sap gateway using the <b>Program ID</b> given in the TCP/IP destination on the SAP system.
In the TCP/IP destination the gateway options should contain the gateway host of the sap system and the gateway service. usually the gateway host is the message server itself and the gateway service is "sapgwXX", where XX is the <system_number>.
Thanks,
Renjith.

Gateway service not shown in Service Catalog

Similar Messages

Maybe you are looking for