[GeForceFX] Green TV-out and slow video when using driver later than v. 56.63

Hi,
I have an MSI FX 5900XT card. Whenever I try to install a newer driver than version 56.63, I get video playback problems. The video can play fine for a minute or two but then the whole computer slows down and the TV-out picture goes green. Only thing to do then is to reboot and get another 1-2 minutes of video playback...
There are no problems playing games with newer drivers.
Version 56.63 works fine for both video and games, but the problem is it lacks some features so the games don't look as good as they should.
If I install an original nVidia driver instead of MSI's, then I can't get a proper PAL output on the TV.
I have the latest VGA BIOS installed.
Any ideas on how to solve this?
Thanks
Thomas

Quote
but I can't understand how MSI can keep releasing faulty drivers
MSI don't write the drivers, nvidia do. the ones you download from MSI are just rebranded versions, tailored for MSI cards. the vanilla forceware drivers from www.nvidia.com work just as well, if not better
Quote
No matter how I tweak the nVidia settings I only get a black and white picture on the TV.
which video connection type are trying to connect to your TV (composite or s-video)? what input formats does your TV support?
see this post [GeForce 6] Black & White TV-out for the fix if you connect via composite, but get B&W image

Similar Messages

How do I get rid of random screen flicker and black screen when using a late 2013 Mac Pro with a 4k Samsung 55" Display?

I have a new Mac Pro late 2013 and a 55" 4k Samsung display connected using an HDMI cable. For the most part the display is amazing, however, I get occasional screen flicker and black outs. Can anyone help? Could I possibly have a bad video card?

4K displays take more than half the bandwidth of a ThunderBolt Bus. So you may get better results if you are careful to place them on their own Bus. This article has the explanation of which port is using which Bus:
Mac Pro (Late 2013): Using multiple displays

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in.

I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in

Try to put your headphones several times in and out from your connection, might be the switch is stuck. Normally it should work again while trying to plug the headphones in and out!

HT4914 why do some songs grayed out and only available when connected on wifi when trying to stream on iphone?

why do some songs grayed out and only available when connected on wifi when trying to stream on iphone?

I had this problem too - of grayed out music I could only play when in WIFI. I noticed when looking in iTunes, these grayed song were not chosen by me to sync on to my iPhone. They were stored in iCloud. I went to Settings > Music and then turned off "Show All Music" so only music that has been dowloaded to my iPhone will be shown.
I don't have iTunes Match, so you may have a different issue than what I had.

Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

'''''thedanbot''''':
I am not sure that your image matches '''''Apoth's''''' description as I interpret it.
Have you tried Firefox Safe Mode to see if an Add-on is causing your problem?
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]

Can the wireless card in my mac wear out and slow down internet connection??

can the wireless card in my mac wear out and slow down internet connection??

Yes the WiFi card can wear out but not what you would really call wearing out like a pair of pants do. It can start to fail causing the connection between your computer and your Wifi router to slow down, IE transmit and receive less data in a given time period. And then it will fail completely.
But as to your internet connection being affected by a failing WiFi card no that can't happen.
If you turn the WiFi off and connect the computer to your router with an Ethernet cable does your internet browsing and downloading speed increase? If it does then there may be something wrong with the WiFi card in your computer or the WiFi section of your router. Hard to say which.
If after connecting the computer to your router with an Ethernet cable and your speeds do not increase then it is a problem with the router or on your ISPs end.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
First my organize has Exchange on 2 site like
site A (internet facing) : 2CAS 2 MB all are Services pack1
site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
some query command cannot return for any result that are server on siteB (just some query command)
Problem
EMS on CU5 return very slow result.
EMS on SP1 still ok.
Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
reply from Social.technet

Hi,
Have you used the above cmdlets to check your Exchange server health?
"all other command that I ran on EMS didn't logged on event viewer.", my environment is the same with you. I use Exchange 2013, only errors will be displayed in MSExchange Management. Actually, it is not related to slow EMS response.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

Problem is:
Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

Prompting for password and username only when using dynamic parameters

Post Author: Co3023
CA Forum: Crystal Reports
How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

Post Author: jehanzeb
CA Forum: Crystal Reports
I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
why don't you embed the username and password in your application, it won't ask for username password then.

Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Cluster

Hi,
Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Hyper-V Cluster with CSV's? Can't find a clear answer somewhere.
Thanx for helping me out.
DJITS.

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

OSX Server webdav bug? - files and folders disappears when filenames are fewer than 7 characters

OSX Server webdav bug? - files and folders disappears when filenames are fewer than 7 characters
Dear Community,
i have a BIG problem with Apple webdav.
All files or folders with fewer than 7 characters in filename disappear.
The problems is only between Mac Server and Mac Clients
and exists since OSX Server 1 (Server 10.7, 10.8, 10.9) on ALL Macs i know.
The problem persist ever and occurs in the following settings:
Mac Server (1.x, 2.x, 3.x) <> Mac Clients (10.7.x, 10.8.x, 10.9.x, 10.6 not tested)
The problem does NOT occur in the following settings:
Mac Server <> Windows Clients
Mac Server <> Linux Clients
Linux Server (my Webhoster) <> Mac Clients
Windows Server (my Webhoster) <> Mac Clients
So i think it is not a problem with server itselv or a single client only,
it is probaly a problem with the combination betwen mac servers and mac clients.
This is NOT a problem with MY MacServers/Clients only and not with only one Server.
It occurs in many different Places and many different Machines.
I have contact Apple Support more then tree times (always when i setup a new machine with server.app)
but she said they heard first time about that and she cannot reproduce that problem.
please, can somebody try it out?
sorry for my bad englisch.
best regards
rené

Supplement note:
The Problem occurs also between OSX Server <> OpenWRT (Linux)
best regards
rené

I get sound no video when using AirPlay. Any ideas?

I get sound no video when using AirPlay. Any ideas?

Do you get an "HDCP error"?
Since the last ATV software update, I have had problems playing You Tube content from the iPad to the ATV using airplay, yet the same content from the You Tube channel on the ATV plays fine. I get the dreaded "HDCP error" which is nonsense, as YouTube content does not have this protection. Netflix also gives the same error. (I have posted seperately about this problem.)
I have had a couple of years of fault-free playing with my setup, the only thing that has changed is the Apple ATV software. Ergo, they need to fix whatever bug they introduced. None of the recommended "fixes" have worked.

Iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted? Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted? Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

Hi Ken,
Thanks for the reply. The project I am working on is a test project for a customer. They could potentially want a number of their educational subjects presented as an interactive text book. The intent of this first project with them is to establish a logical workflow that will allow us to efficiently estimate costs and allow for review throughout the design process. Having worked with customers on creative projects in the past I can anticipate that they will want a number of changes made once they see a working version of the interactive text book.
It is a grim reality that no project can be fully edited and planned prior to working on it and I know revisions and changes are always made once the customer can see their product. It is ok with me if there is no easy way to pass the text back and forth from the customer and me without having to reformat everything but I just want to know that is the way it works in order to provide a realistic time estimate for the project.
My hope was I would be able to export the formatted text, allow them to make edits and then reimport that formatted text. The style sheets I am using are from one of the iBooks Author templates.
Do you know if there is a way to use (or export ) this style sheet so it can be used in a Pages Document?
Or, would the best option be to have the customer install iBooks Author? This would require the customer to have a mac and the software so it doesn't work for all cases.
Another idea I was considering would be to export the book as a PDF and have the customer add markup and notes to the PDF.
All of these options do not seem too great to me.
I am open to any ideas.
Thanks,
Rob

Will a iphone purchased in Singapore be covered under complete hardaware and software support when used in India

Will a iphone purchased in Singapore be covered under complete hardware and software support when used in INDIA

See Here > http://www.apple.com/legal/warranty/

[GeForceFX] Green TV-out and slow video when using driver later than v. 56.63

Similar Messages

Maybe you are looking for