Get a value from the method to class in workflow

Hi Expert,
     I am doing a workflow and passing a value when submiting and i need to get the passing value in the Class for further info,
****Instantiate an empty event container
CALL METHOD cl_swf_evt_event=>get_event_container
    EXPORTING
      im_objcateg = cl_swf_evt_event=>mc_objcateg_cl
      im_objtype   = iv_objtype
      im_event     = iv_event
    RECEIVING
      re_reference = lr_event_parameters.
*****Set up the name/value pair to be added to the container
lv_param_name = 'LEVEL'.
lv_level = wd_this->adlvl.
****Add the name/value pair to the event conainer
TRY.
      CALL METHOD lr_event_parameters->set
        EXPORTING
          name = lv_param_name
          value = lv_level.
CALL METHOD cl_swf_evt_event=>raise
        EXPORTING
          im_objcateg        = ls_sibflpord-catid
          im_objtype         = ls_sibflpord-typeid
          im_event           = iv_event
          im_objkey          = ls_sibflpord-instid
          im_event_container = lr_event_parameters.
I Created a Customised Class zcl_asset and i need to get the iv_event or lv_level value which i passing in the above method to process further to determine the approver in my customised zcl_asset class.
Thanks,
Regards,
Deeesanth

>I am doing a workflow and passing a value when submiting and i need to get the passing value in the Class for further info,
Look, this is not really possible. You cannot pass a value with your code to a class (whatever you mean by this?). With your method you are triggering an event with a parameter. It is possible to "catch" this event and its parameter from workflow. Then your parameter value will be in your workflow and you can use it later (with your class).
So for example, if you start a workflow with your code, you can create a container element into the workflow, and then with simple binding (in workflow editor) you can get your parameter value into the container element.
Regards,
Karri

Similar Messages

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to get multiple values from the list

I've a list of an item which I queried it from the database. I also created a button that will takes a selected items from the list when it was clicked. I used javabean to get the data from database.
<%     // clicked on Select District Button
Vector vselectedDistrict = new Vector();
Vector vdistrictID = new Vector();
String tmpSelectDistrict = "";
tmpSelectDistrict = request.getParameter("bSelectDistrict");
if(tmpSelectDistrict != null)
     // get multiple values from the list
     String[] selectedDistrict = request.getParameterValues("usrTDistrict");
     vselectedDistrict.clear();
     vdistrictID.clear();
     if((selectedDistrict != null) && (selectedDistrict.length != 0))
                       for(int i=0;i<selectedDistrict.length;i++)
               vselectedDistrict.addElement(selectedDistrict);
          vdistrictID = dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
          for(int i=0;i<vdistrictID.size();i++)
               out.println("district = " + selectedDistrict[i]);                         out.println("district ID= " + vdistrictID.get(i).toString());
%>
// get vdistrict from the database here......
<select name="usrTDistrict" size="5" multiple>
<%     for(int i = 0; i< vdistrict.size(); i++)
%>
     <option value="<%=vdistrict.get(i).toString()%>"><%=vdistrict.get(i).toString()%></option>
<%
%>
</select>
<input type="submit" name="bSelectDistrict" value="Select District">
Lets say the item that i selected from the list is 'Xplace' and I clicked on the Select District button,
what I got is this error message:
org.apache.jasper.JasperException: Unable to convert string 'Xplace' to class java.util.Vector for attribute usrTDistrict: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
So where is going wrong and what the message means?. Any help very much appreciated. Thanks

These are just guesses that might hopefully steer you in directions you haven't looked in yet.
I presume you used triangle brackets (< >) to avoid having the Jive Forum think it was the "italics" tag?
Are you certain this: dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
expects a Vector as its second parameter? And returns a Vector?
I don't believe you've shown how you use the javabean, or its code? Perhaps it should be rewritten to accept an array of strings instead of a Vector?

How to get a value from the previous element (XSLT/XPATH gurus ahoy!)

Hi All,
I am building an RTF template for a "letter of reference"-report. Sometimes there are several rows in the data, that need to be printed as one. This is due to consecutive temporary contracts, which will be printed out as one period of service.
Here's a simplified data example to illustrate the problem.
<ROW>
<START_DATE>01-01-1980</START_DATE>
<END_DATE>01-01-1988</END_DATE>
</ROW>
<ROW>
<START_DATE>01-01-1988</START_DATE>
<END_DATE>01-01-1990</END_DATE>
</ROW>
<ROW>
<START_DATE>01-01-2000</START_DATE>
<END_DATE>01-01-2005</END_DATE>
</ROW>
With the data above, I should print two lines:
01-01-1980 - 01-01-1990
01-01-2000 - 01-01-2005
I need to compare START_DATE of an element (except for the first one) with the END_DATE of the previous element, to find out whether to print the END_DATE for that element or not. How can I get that value from the previous element?
Thanks & Regards, Matilda

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

Getting rpm values from the fans on the MSI NEO2-FIR motherboard doesn't work

I currently have 6 Noctua NF-S12-1200 120mm fans spinning in my computer but i am unable to get rpm values from them except the cpu-fan. It doesn't work to get a readout from the others with either, BIOS, Dual Core Center or Speedfan. Regarding Speedfan is it true it don't support the SuperIO Chip on the Neo2, the FINTEK F71882F? It's not currently listed in their supported temperature sensors list.
So whats the problem? Shouldn't atleast DualCore Center atleast show the rpm's from the other chassis fans?
Or the fans don't support sensor readings?
Thanks!

Quote from: Jack on 13-October-10, 00:15:36
Well, there is nothing that can be done about. SysFAN 1 & 4 support sensor readings, #2,#3 and #5 don't. You can also see that in BIOS Setup. #1&#4 are the only ones that show up there (H/W Monitor section). This is not a malfunction or a bug. You have to live with no fan sensor readings or be creative about the wiring.
The problem is that i use the UNLA cables from Noctua which half the speed of the NF-S12 fans i run with. And it blocks the rpm readouts in Speedfan and BIOS.
http://www.noctua.at/main.php?show=productview&products_id=5&lng=en
Strange thing is that the CPU fan reads fine with the ULNA cable attached but the SYSFANS will not read the rpm with the ULNA cables.
What is wrong?

How to Get Parameter Values from the URL ?

Hi,
I have built a calendar called cal_test. I am calling this calendar with this URL:
http://.../pls/.../xyz.cal_test.show?p_arg_names=p_sc_id&p_arg_values=2&p_arg_names=_start_date&p_arg_values=FEB-2002
In the 'Additional PL/SQL Code' tab of cal_test, I need to call a procedure which requires me to pass in as parameters the values of p_sc_id and startdate embedded in the URL named above. How can I retrieve these 2 values from the URL ? Any advice will be appreicated !
Dorothy

Hi Daniel
The following thread might help;
if not, you could try posting the question in Application Server » Web Dynpro Java
Thanks
Kenny

How to get updated values from the loops while they are running

Hello,
I am having difficulty solving a very basic problem, how to access the updated values from the 'FOR loop' while its running? Basically, the VI I am currently working on calls two sub VIs. Each sub VI has a for loop, and both VIs may or may not run for same number of iterations. My goal is to read the values at each terminal inside the loop of both sub VIs, in the Main VI. I tried to achieve it using Global Variables, but in main VI it displays only the last iteration value from both sub VIs. Could anyone please tell me whrere am I going wrong? Is there any other/better way to achieve this.
I appreciate any input on this issue.
Kudos are (always) welcome for the good post. :-)
Solved!
Go to Solution.

Dennis,
In attached VI, I can see the values changing in the sub VI from the main VI with the numeric indicator whose reference is passed on to the sub VI. Now if I wanted to store or use those values how do I do that? I tried to chnge the indicator to control and read from it (in the attached VI) , but the the indicator updates only once. Tried to create a property node and read the Value from it and it didn't work either.
Thanks in Advance!
-Nilesh
Kudos are (always) welcome for the good post. :-)
Attachments:
main-1.vi ‏8 KB
sub-1.vi ‏9 KB

How to get multiple values from the db using select

hi all,
i am using oracle 9i database
i created a procedure
create or replace procedure sample_proce
as
to_i varchar2(50)
begin
select to_id into to_i from sample where flag in('y');
dbms_output.put_line('hai'|| to_i);
end;
when i executed this procedure the following error occurred.
error at line 5 fetching too many rows.
but when i execute the select query alone i can able to view all the rows.
how to resolve it

i used the following procedure
create or replace procedure sample_proc
as
begin
for s in(select to_id from sample where flag='y')
loop
dbms_output.put_line(s.to_id);
end loop.
end;
it is executed fine. i can able to fetch all the rows.
how to pass all these values into the another procedure.
we usually pass only one value into another procedure, i do no how to pass all the values . please help me.
Thank u.

How to get each value from a parameter passed like this '(25,23,35,1)'

Hi
One of the parameter passed to the function is
FUNCTION f_main_facility(pi_flag_codes VARCHAR2) return gc_result_set AS
pi_flag_codes will be passed a value in this way '(25,23,35,1)'
How to get each value from the string
like 25 first time
23 second time
35 third time
1 fourth time
I need to build a select query with each value as shown below:-
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3, code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 25 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q1,
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3,code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 23 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q2,
(SELECT t2.org_id, RTRIM(xmlagg(xmlelement(e, t4.description || ';')
ORDER BY t4.description).EXTRACT('//text()'), ';') AS DESCRIPTION
from org_name t2, ref_org_name t3,code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 35 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date
group by t2.org_id) q3,
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3, code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 1 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q4
Please help me with extracting each alue from the parm '(25,23,35,1)' for the above purpose. Thank You.

chris227 wrote:
I would propose the usage of regexp for readibiliy purposes and only in the case if this doesnt perform well, look at solutions using substr etc.
select
regexp_substr( '(25,23,35,1)', '\d+', 1, 1) s1
,regexp_substr( '(25,23,35,1)', '\d+', 1, 2) s2
,regexp_substr( '(25,23,35,1)', '\d+', 1, 3) s3
,regexp_substr( '(25,23,35,1)', '\d+', 1, 4) s4
from dual
S1 S2 S3 S4
"25" "23" "35" "1"In pl/sql you do something like l_val:= regexp_substr( '(25,23,35,1)', '\d+', 1, 1);
If t2.att_type is type of number you will do:
t2.att_type= to_number(regexp_substr( '(25,23,35,1)', '\d+', 1, 1))Edited by: chris227 on 01.03.2013 08:00Sir,
I am using oracle 10g.
In the process of getting each number from the parm '(25,23,35,1)' , I also need the position of the number
say 25 is at 1 position.
23 is at 2
35 is at 3
1 is at 4.
the reason I need that is when I build seperate select for each value, I need to add the query number at the end of the select query.
Please see the code I wrote for it, But the select query is having error:-
BEGIN
IF(pi_flag_codes IS NOT NULL) THEN
SELECT length(V_CNT) - length(replace(V_CNT,',','')) FROM+ ----> the compiler gives an error for this select query : PLS-00428:
*(SELECT '(25,23,35,1)' V_CNT FROM dual);*
DBMS_OUTPUT.PUT_LINE(V_CNT);
-- V_CNT := 3;
FOR L_CNT IN 0..V_CNT LOOP
if L_CNT=0 then
V_S_POS:=1;
V_E_POS:=instr(pi_flag_codes, ',', 1, 1)-1;
else
V_S_POS:=instr(pi_flag_codes,',',1,L_CNT)+1;
V_E_POS:=instr(pi_flag_codes, ',', 1, L_CNT+1)-V_S_POS;
end if;
if L_CNT=V_CNT then
V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS));
else
V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS,V_E_POS));
end if;
VN_ATYPE := ' t2.att_type = ' || V_ID;
rec_count := rec_count +1;
query_no := 'Q' || rec_count;
Pls help me with fetching each value to build the where cond of the select query along with the query number.
Thank You.

How to get int value from [session.getAttribute("String")]

i am not able to get int value from the following statiment
int i=session.getAttribute("String");
i also try by casting it into int but it dont work, can somebody help me in this regard

abuu wrote:
i am not able to get int value from the following statiment
int i=session.getAttribute("String");
i also try by casting it into int but it dont work, can somebody help me in this regard
Integer i=(Integer)session.getAttribute("String");
i.intValue();but know how it is working. that is useful.
Diablo.

Get numerical values from 2D array of string

Hello!
I start by saying that I have a base knowledge of LabView. I'm using LabView 2011. I'm doing some communications test via Can-Bus protocol. As you can see in pictures of the block diagram and of the front panel that I've attached I'm using "Transmit Receive same Port" LabView example. It works very good but I would need to insert the 8 data bytes that I receive from the server in 8 different numerical variables so that I could use them to make some operations. How can I get numerical values from the 2D array of string that I attached?
Every example that you can provide is important!
Thank you very much!
Attachments:
1.jpg ‏69 KB
2.jpg ‏149 KB

Hi martiflix,
ehm: to unbundle data from a cluster I would use the function Unbundle(ByName)…
When you are new to LabVIEW you should take all the FREE online resources offered by NI on their website!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to get old value from IWDCustomEvent

Hello All,
I have applied a Listener on a field value. I want to get old value from the IWDCustomEvent as well new value when event will get fire. Is it possible in Web Dynpro.

Hi
Probably you need to get the record from backend base on the date of insertion. and then store it into the WD context, and simple java to compare the old and new record based on date of insertion and again put back to WD Context then finally you can use WDCustomEvent to get the data.
Hope it will help you.
Thanks

How to get a value from one item into another

How can i get value from one item into another item.
Ex: I have a report, in there i have check boxes, and when i have checked some rows, and press submitt, a prosses computates it into a item on another page, and a branche redirects to page 3. Then i'm going to use the value in the item into a PL/SQL script in an report to show the submittet items.
How can i do this?
Computation script, pages and all that is fixed. But i dont know which PL/SQL statement to use to get th value from the item.

Hi Fredr1k,
Use the V() function from pl/sql.
e.g. V('P3_MY_ITEM')
will return the value of that page item.
As long as the pl/sql is called from within the Apex environment.
Regards
Michael

Remote Object - not able to get the returned value from java method

     Hi ,
I am developing one sample flex aplication that connects to the java code and displays the returned value from the
java method in flex client. Here I am able to invoke the java method but not able to collect the returned value.
lastResult is giving null . I am able to see the sysout messages in server console.
I am using flex 3.2 and blazeds server and java 1.5
Here is the code what I have written.
<?xml version="1.0" encoding="utf-8"?><mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundColor="#FFFFFF" initialize="initApp()">
<mx:Script><![CDATA[
import mx.controls.Alert;
import mx.binding.utils.ChangeWatcher;
import mx.rpc.events.ResultEvent;
import mx.messaging.*;
import mx.messaging.channels.*
public function initApp():void {
     var cs:ChannelSet = new ChannelSet();
     var customChannel:Channel = new AMFChannel("my-amf", "http://localhost:8400/blazeds/messagebroker/amf");     cs.addChannel(customChannel);
     remoteObj.channelSet = cs;
public function writeToConsole():void {      remoteObj.writeToConsole(
"hello from Flash client");
      var returnedVal:String = remoteObj.setName().lastResult;     Alert.show(returnedVal);
//[Bindable]
// private var returnedVal:String;
]]>
</mx:Script>
<mx:RemoteObject id="remoteObj" destination="sro" />
<mx:Form width="437" height="281">
<mx:FormItem>
</mx:FormItem>
<mx:Button label="Write To Server Console" click="writeToConsole()"/>
</mx:Form>
</mx:WindowedApplication>
Java code
public
     public SimpleRemoteObject(){
          super();     }
class SimpleRemoteObject {
     public void writeToConsole(String msg) {          System.out.println("SimpleRemoteObject.write: " + msg);     }
     public String setName(){          System.
out.println("Name changed in Java");
          return "Name changed in Java";
And I have configured destination in remote-config.xml
<destination id="sro">
   <properties>
    <source>SimpleRemoteObject</source>
    <scope>application</scope>
   </properties>
</destination>
Please help me .

You are not able to get the returned value because if you see the Remote object help you will realise you have to use result="resultfn()" and fault = "faultfn()"
In this you define what you wish to do.
More importantly in the remote object you need to define which method you wish to call using the method class like this
<mx:RemoteObject id="remoteObj" destination="sro" result="r1" fault="f1" >
     <Method name="javaMethodName" result="r2" fault="f2"/>
<mx:RemoteObject>
r2 is the function where you get the result back from java and can use it to send the alert.

How do I get (in c) a method return value from the java side?

I have a class in the Java side, that I pass as object to the c side.
in the Java class I have the following method:
public String getPgmId()
return pgmId;
where pgmId is a private string.
I nees to get the value of pgmId, hopefully by using the getPgmId method.
what I have until now is:
JNIEXPORT jint JNICALL Java_JavaAPI_StartProgram (JNIEnv *env, jobject obj, jobject obj2)
jmethodID methID;
jstring jstr;
const char *str;
/* Get a reference to obj2 class */
jclass cls = (*env)->GetObjectClass (env, obj2);
if (cls == NULL){
return;
methID = (*env)->GetMethodID (env, cls, "getPgmId", "()Ljava/lang/String;");
}//StartProgram
my question is how from this point, can I get the return value of the method getPgmId().
tnx

jString CallStringMethod(env, obj2, methID);

Get a value from the method to class in workflow

Similar Messages

Maybe you are looking for