Get Objec - what tables

Hi,
From what tables are taken data when is processed the code?
get objec.
I suppose, reading other posts, that main table is hrp1000.
Is it right?

Hi Tony,
Get OBJEC is the event used to fetch data when u r using Logical database PCH.
Whatever infotypes u mention under Infotypes keyword, all the corresponding tables will be filled as soon as GET OBJEC is triggered. If u want to understand how PCH works just goto Tcode SE36->type PCH->Display and click on SOURCE CODE on the application toolbar to see the code.
Check this and get back to me incase of any queries.
Dont forget to reward points if found useful.
Thanks,
Satyesh

Similar Messages

GET OBJEC

Hi,
I have to use PCH Logical Database in my program.
Can you please let me know:
1. What should I do to get the standard PCH Selection Screen
2. What does GET OBJEC do.
Thanks and Regards,
Ishaq.

Hi Ishaq Ali Khan,
After selecting the logical database in Attributes.
Then inside u need to just give
TABLES: OBJEC.
To fetch the data from database u need to use GET Event block.
Please check this
REPORT logical_database.
TABLES: objec.
GET objec.
WRITE: objec-otype,
         objec-objid,
         objec-begda,
         objec-endda.
Get is an Event Block.
GET in Logical Database acts as SELECT statement . It fetches the data from the database similar to SELECT statement.
Please check this link
http://help.sap.com/search/highlightContent.jsp
Hope this helps...
Best regards,
raam

Rewrite or optimize the *Get Objec* instruction in an *OM* report

Hi All
I'm facing an optimization issue in a report OM and i would like to rewrite or optimize the code below.. I want to reduce the duration and i'm trying to write a new version without the PCH logical database . Will it be possible to reduce it without the PCH? How can i do it?
Thanks to all!
Infotypes                                                           *
infotypes: 1000,                       "Object
           1001,                       "Relationships
           9149,                       "Site
           1013,                       "Employee Group/Subgroup
           1008,                       "Acct. Assignment Features
           1005,                       "Planned Conpensation
           9107,                       "Org. Unit Type
           1007,                       "Vacancy
           0001,                       "Organisational Assignment
           0002,                       "Personal Data
           9101,                       "For Functional Area
           9108.                       "Org. Unit Ref      HR1K901124AJK
start-of-selection.
get objec.
end-of-selection.

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

Dunning Letter as Crystal Report: What tables? (SAP B1 9.0)

Dear Experts,
I am being asked to revise the Dunning Letters for our clients. The existing PLDs for each Dunning Letter shows most data fields as system variables. The existing Crystal Report for Dunning Letter 1 is a conversion from the PLD and doesn't show table information for most of the report's main items. There are tables in the report but they are standard ones (OADM, OADP, OCRD, OHEM, OSLP). It also includes a "table" called "PLD__ITEMS" which has all the PLD system variables and no B1 table or field/column information.
As I'm just now starting to work with dunning letters, I see that I can't even run this report in Crystal. The PLD__Items datasource prompts me for a file path and class name. Any ideas what one enters here to run the report outside of B1 (from the Crystal report designer)?
The main focus of my question is: Has anyone created a Crystal Report to replicate the Dunning Letter and if so, what tables are involved and how are they connected? If I can create a Dunning Letter entirely in Crystal, I can replicate it across all clients and get the correct fields/columns of data the clients want. The inclusion of the PLD__Items apparently limits my ability to test the results. I would prefer to avoid the PLD limitations.
Thanks for any assistance.

Thank you Nagarajan. I have a dunning letter created in Crystal Reports for our client. It is fairly limited in scope, it just has the customer name and address, invoice numbers and dates, amounts due and the text they wanted in it.
I can import it into B1 9.0 and set it as the default for Dunning Letter #1 and it runs, but unlike other formats where there is a DocEntry and/or ObjectID and a ?DocKey@ or ?ObjectId@ parameter, how do I limit the report to just one customer? Typical document layouts run for the document that's on the screen. In the dunning process, the report runs once for every customer when the Dunning Letter Method is set to "One Letter per BP". I have to limit the report to one customer at a time. Right now, each dunning letter based on the Crystal report is identical and it contains all the data for every customer.
So, does anyone have any ideas for what selection criteria needs to be included in the Crystal report to have it select just one customer from the dunning wizard tables? Thanks.
Michael
Edit: I created a ?WizardID@ parameter and a ?CardCode@ parameter to limit the report to a single dunning wizard event and a single customer. While it works fine in Crystal itself, it doesn't work in B1 at all. I had thought that by limiting the report in this way, it would only create dunning letters for a single customer.

Values not getting updated in table mvke

Hi,
I am working on a module pool program.In the o/p screen there are many records.If the user wants to change the field values of a particular record,he clicks on the checkbox besides that record and when he click on the change button,control goes to update screen.In this screen when the user changes the value of one particular field and click on the checkbox beside and then click on the execute button,the changed value of that field should get updated in that particular record in the database table.Here I want to update mvke and marc tables.
I have used FM BAPI_MATERIAL_SAVEDATA to update the database tables.
Only marc table is getting updated with changed values.mvke table is not getting updated.What would be the reason for this.
I am sending a part of my code.Please check it.
form move_mat_data .
*Header
gt_bapi_head-material = gs_output1-matnr.
gt_bapi_head-ind_sector = gs_output1-mbrsh.
gt_bapi_head-matl_type = gs_output1-mtart.
gt_bapi_head-basic_view = 'X'.
gt_bapi_head-purchase_view = 'X'.
gt_bapi_head-account_view = 'X'.
gt_bapi_head-sales_view = 'X'.
*Client
gt_bapi_client-matl_group = gs_output1-matkl.
gt_bapi_client-base_uom = gs_output1-meins.
gt_bapi_clientx-matl_group = 'X'.
gt_bapi_clientx-base_uom = 'X'.
*Plant
gt_bapi_marc1-plant = gs_output1-werks.
gt_bapi_marc1-pur_status = gs_output1-mmsta.
gt_bapi_marc1-mrp_type = gs_output1-dismm.
gt_bapi_marc1-mrp_ctrler = gs_output1-dispo.
gt_bapi_marc1-serv_level = gs_output1-zserclass.
gt_bapi_marc1-availcheck = gs_output1-mtvfp.
gt_bapi_marcx-plant = gs_output1-werks .
gt_bapi_marcx-pur_status = 'X'.
gt_bapi_marcx-mrp_type = 'X'.
gt_bapi_marcx-mrp_ctrler = 'X'.
gt_bapi_marcx-serv_level = 'X'.
gt_bapi_marcx-availcheck = 'X'.
Material Description
REFRESH gt_materialdesc.
gt_materialdesc-langu = gs_output1-spras.
gt_materialdesc-matl_desc = gs_output1-maktx.
append gt_materialdesc.
*Sales
gt_bapi_mvke1-sales_org = gs_output1-vkorg.
gt_bapi_mvke1-distr_chan = gs_output1-vtweg.
gt_bapi_mvke1-sal_status = gs_output1-vmsta.
gt_bapi_mvke1-valid_from = gs_output1-vmstd.
gt_bapi_mvkex-sales_org = 'X'.
gt_bapi_mvkex-distr_chan = 'X'.
gt_bapi_mvkex-sal_status = 'X'.
gt_bapi_mvkex-valid_from = 'X'.
endform. " move_mat_data

Hello Hema,
Find the fields which you need to populate with values:
As an example i'm trying to update DISPO from MARC and VKORG from MVKE.
No need to fill clientdata and clienddatax.
* Header data
      MOVE g_wa_mat_out-s_matnr TO g_r_headdata-material.
      MOVE 'X' TO g_r_headdata-mrp_view.
* Plant data
      MOVE g_wa_mat_out-t_werks TO: g_r_plantdata-plant,
                                    g_r_plantdatax-plant.
          MOVE g_wa_mat_out-t_dispo_new TO g_r_plantdata-mrp_ctrler.
          MOVE 'X' TO g_r_plantdatax-mrp_ctrler.
          MOVE g_wa_mat_out-t_vkorg_new TO g_r_salesdata-sales_org.
          MOVE 'X' TO g_r_salesdatax-sales_org.
Reward If Helpful.
Regards
Sasidhar Reddy Matli.
Edited by: Sasidhar Reddy Matli on Feb 7, 2008 11:49 AM

How do I find what table a field is in?

Hi,
If I know a field name, how would I search the Data Dictionary to find the table (or tables) that the field is found in?
For example, I have a program spec that that says field AZSUB is in table MARM, but it is not. How can I find what table this field is actualkly in?
Thanks for your help!
Andy

Hi Andrew,
Just goto se11, enter the data element of that field and clisk on the where used list on the application tool bar. You will get all the tables in which the field appears.
You got find out which would be your appropriate table may be using by the description of the table or the contents or by the links..
Regards,
Vinod Kumar

BADI for MIGO update - Data not getting saved in table sometimes

Hi,
This is regarding automatic update of material document number to our Z Table for Gate entry in MM.
Steps for Generating GR throu2019 MIGO:-
1) the user has to key in the gate entry number and plant,
2) then after giving i/p values the user has to click the save button,
3) MIGO number is generated by the system which is updated in gate entry header table.
For updating the MIGO number BADI is used . But some time the system is not updating the GR number in gate entry header table.
Can we use COMMIT WORK statement in BADI? Hope its not advisable to use it.
What else can we do if data is not getting stored in table while updating throu2019 BADI?
Inside the Method : IF_EX_MB_MIGO_BADI~POST_DOCUMENT the below code is written,
Instead Of Updating The Gate Entry Item Table Now
Update The Gate Entry Header Table. Update The
Value Of The Field MBLNR With Current Document Number
Generated Updating the header table ZMM_GATE_ENTRY
    SELECT SINGLE *
      FROM ZMM_GATE_ENTRY
      INTO WA_ZMM_GATE_ENTRY
     WHERE GATEENTRYNO EQ GS_EXDATA_HEADER-GATEENTRYNO
       AND WERKS       EQ GS_EXDATA_HEADER-WERKS
       AND GYEAR       EQ GS_EXDATA_HEADER-ENTRY_DATE+0(4).
Check To Ensure That Once A Gate Entry Number
Is Associated With A GR It Cannot Be Reused
    IF WA_ZMM_GATE_ENTRY-GR_NUMBER IS INITIAL.
      WA_ZMM_GATE_ENTRY-REFERENCE = GS_EXDATA_HEADER-REFERENCE.
      WA_ZMM_GATE_ENTRY-REFWERKS = GS_EXDATA_HEADER-WERKS.
      WA_ZMM_GATE_ENTRY-GR_NUMBER = IS_MKPF-MBLNR.
      WA_ZMM_GATE_ENTRY-GR_YEAR   = IS_MKPF-MJAHR.
MODIFY ZMM_GATE_ENTRY FROM WA_ZMM_GATE_ENTRY .u201Dupdating the workarea
u201CThe above modify stmt updates data sometimes and does not updates the data sometimes
    ELSE.
      MESSAGE E901(ZMM) WITH GS_EXDATA_HEADER-GATEENTRYNO WA_ZMM_GATE_ENTRY-GR_NUMBER.
    ENDIF.
Plz suggest some soln?
Regards,
P.S.Chitra

Hi,
This is regarding automatic update of material document number to our Z Table for Gate entry in MM.
Steps for Generating GR throu2019 MIGO:-
1) the user has to key in the gate entry number and plant,
2) then after giving i/p values the user has to click the save button,
3) MIGO number is generated by the system which is updated in gate entry header table.
For updating the MIGO number BADI is used . But some time the system is not updating the GR number in gate entry header table.
Can we use COMMIT WORK statement in BADI? Hope its not advisable to use it.
What else can we do if data is not getting stored in table while updating throu2019 BADI?
Inside the Method : IF_EX_MB_MIGO_BADI~POST_DOCUMENT the below code is written,
MODIFY ZMM_GATE_ENTRY FROM WA_ZMM_GATE_ENTRY .u201Dupdating the workarea
u201CThe above modify stmt in code updates data sometimes and does not updates the data sometimes
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Aug 10, 2010 11:33 AM

Parsing query and getting list of tables used

Hi All,
   I require to parse sql query (simple & complex as well) and to get the list of tables used in the query.
   And need to validate that, the list of tables against a whitelist to maintained in the file.
I tried to write my own parser, since there are lots possible ways to write complex queries, i am unable to cover all the scenarios.
I require a help, Is there any other ways to get the list of tables used in a query?
Thanks,
Mahendran..

user10279893 wrote:
Hi All,
   I require to parse sql query (simple & complex as well) and to get the list of tables used in the query.
   And need to validate that, the list of tables against a whitelist to maintained in the file.
I tried to write my own parser, since there are lots possible ways to write complex queries, i am unable to cover all the scenarios.
I require a help, Is there any other ways to get the list of tables used in a query?
Thanks,
Mahendran..
You'll never cover all scenarios by trying to parse a query.
For example, what about a query that queries views and those views query pipelined functions, and those pipelined functions query other views or tables or pipelined functions etc.
And what about a query that dynamically obtains the table names, such as...
SQL> select
2    table_name,
3    to_number(
4      extractvalue(
5        xmltype(
6 dbms_xmlgen.getxml('select count(*) c from '||table_name))
7        ,'/ROWSET/ROW/C')) count
8 from user_tables
9 where iot_type != 'IOT_OVERFLOW'
10 or    iot_type is null;
TABLE_NAME                      COUNT
DEPT                                4
EMP                                14
BONUS                               0
SALGRADE                            5
.. in this case the tables being accessed (to count their rows) are not even known within the code, they are dynamically generated queries at run-time, so the only way to know what tables are accessed is to actually run the query.
Of course, a well designed system, with proper documentation and version control would allow you to take any database object and know where and what is using it, and whether it's even being used.

How to get the plsql table data into output cursor

Hi,
Could anybody please help me.
Below is an example of the scenario..
CREATE OR REPLACE PACKAGE chck IS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR);
TYPE get_rec is record (ename varchar2(20),
eno number(12));
TYPE t_recs IS TABLE OF get_rec INDEX BY BINARY_INTEGER;
emp_tab t_recs;
END chck;
CREATE OR REPLACE PACKAGE BODY chck AS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR)
is
BEGIN
select ename, eno
bulk collect into emp_tab
from emp;
open oc_result_cursor for select * from table(emp_tab); -- I believe something is wrong here ....
END;
END chck;
the above package is giving me an error:
LINE/COL ERROR
10/29 PL/SQL: SQL Statement ignored
10/43 PL/SQL: ORA-22905: cannot access rows from a non-nested table
item
let me know what needs to be changed
Thanks
Manju

manjukn wrote:
once i get the data into a plsql table, how to get this plsql table data into the cursor?There is no such thing as a PL/SQL table - it is an array.
It is nothing at all like a table. It cannot be indexed, partitioned, cluster, etc. It does not exist in the SQL engine as an object that can be referenced. It resides in expensive PGA memory and needs to be copied (lock, stock and barrel) to the SQL engine as a bind variable.
It is an extremely primitive structure - and should never be confused as being just like a table.
Its use in SQL statements is also an exception to the rule. Sound and valid technical reasons need to justify why one want to push a PL/SQL array to the SQL engine to run SELECT 's against it.

What table/fields show if a PO Item has a G/R Expected?

Hi experts,
I am coding a program in SRM, but not sure I'll find these answers there, so I'm likely going to do a RFC to ECC and get the values, but need to know how to identify.
In ECC:
(1) What table/field shows if a PO item has a G/R expected?
(2) Where can I find if the PO item has any open receipts?
(3) Where can I find the amount remaining to be invoiced on a PO item?
Thank you very much!
Mark

Hi,
I think EKPO-WEPOS = 'X' mentions that it is expecting G/R..Please see the data element WEPOS documentation for details...
1) The above is the answer
For 2) and 3) You can check the table EKBE...in that you can use the field VGABE to different between invoice receipt and goods receipt..
1 Goods Receipt
2 Invoice Receipt
Thanks
Naren

Only one line is getting printed in Table in Smartforms (ECC 6.0)

Hello Sir,
I am new in ABAP and doing Smartforms (ECC 6.0) on project from customer side.
I have to deliver the object in time and it is already late, please help me.
This is my question:
Object : Stock Transport Order.
=======================
I have created Table in main window after Program Line Node.
>Main Window
>>Code2
>>Table1
>>>Header
>>>>Row1
>>>>>Cell1 to Cell10
>>>Main Area
>>>>Row2
>>>>>Cell1 to Cell10
>>>Footer
>>>>Row3
>>>>>Cell1 to Cell10
I have mentioned internal tabel as well work area table in "DATA" tab in table Node.
In Row1 I have created Text Node in every cell having Column Heading.
In Row2 I have created Text Node in every cell having variable.
In Row3 all cells are blank.
On output only one line is getting printed
What could be the reason.
=====================================================================
This is Code1 (is in the beginning of the form in window1)
==========
*& Selection of Purchasing Document No,Plant,Short Text,Quantity,Material No,
*& Gross order value in PO currency
select single ebeln werks txz01 menge matnr brtwr
from ekpo into
(v_ebeln,v_werks,v_txz01,v_menge,v_matnr,v_brtwr)
where ebeln = DOCNO.
*& Selection of Plant address
select single adrnr from t001w into v_adrnr
where werks = v_werks.
*& For Selection of phone,fax
select single name1 tel_number fax_number from adrc into (v_name1,phone,fax)
where addrnumber = v_adrnr.
*& For E-Mail Selection
select single SMTP_ADDR from adr6 into mail where addrnumber = v_adrnr.
*& For CST No.,GST No.
select single J_1ICSTNO J_1ILSTNO
              from J_1IMOCOMP into (CST,GST)
              where werks = v_werks.
*& Selection of Vendor Address No., PO date
select single reswk aedat from ekko into (v_reswk,v_aedat) where
ebeln = v_ebeln.
*& Selection of Supplying (Issuing) Plant address
select single adrnr from t001w into vendor
where werks = v_reswk.
*& Selection of storage location
select single lgort from ekpo into v_lgort where werks = v_werks
and ebeln = v_ebeln.
*& Selection of description of storage location
select single lgobe from t001l into v_lgobe where werks = v_werks.
*& Fetching data into internal table from ekpo
select ebeln ebelp matnr txz01 menge brtwr from ekpo into corresponding fields
of table iekpo where ebeln = v_ebeln and werks = v_werks.
Fetching data into internal table from marm for Pck
select * from marm into corresponding fields of table imarm for all entries
in iekpo where matnr = iekpo-matnr.
Fetching data into internal table from mara for Pack Type Code
select * from mara into corresponding fields of table imara for all entries
in iekpo where matnr = iekpo-matnr.
Fetching data into internal table from tvegrt for Pack Type Description
select * from tvegrt into corresponding fields of table itvegrt
for all entries in imara where magrv = imara-magrv.
Fetching data into internal table from eket for Receipt Date
select * from eket into corresponding fields of table ieket
where ebeln = v_ebeln.
Selection of Order Type from mepo_topline
*select single bsart from mepo_topline into v_bsart where ebeln = v_ebeln
*and superfield = v_werks.
*if v_bsart = 'UB'.
xhead = 'Replenishment Order'.
*eleseif v_bsart = 'ZSTO'.
xhead = 'Purchase Order'.
*endif.
*& Defining of variable for Printing Line Serial Number,Total Quantity,
*& Total Value
=====================================================================
This is Code2 (is in the main window)
==========
xln = 0.
tmenge = 0.
tvalue = 0.
Loop for printing table
loop at iekpo into wekpo.
xln = xln + 1.
xmatnr = wekpo-matnr.      " Material Number (Code)
xtxz01 = wekpo-txz01.      " Material Name
xmenge = wekpo-menge.      " Line Quantiy
xbrtwr = wekpo-brtwr.      " Basic Rate
*& Pck
read table imarm into wmarm with key matnr = wekpo-matnr.
xpck = wmarm-umren.        " Packing Size
*& Num
xnum = xmenge / xpck.      " Numbers of Packing
*& Line Value
xvalue = xmenge * xbrtwr. " Line Basic Value
*& Packing Type
read table imara into wmara with key matnr = wekpo-matnr.
xpacktype = wmara-magrv.   " Packing Type Code
*& Packing Type Description
read table itvegrt into wtvegrt with key magrv = imara-magrv.
xpackdesc = wtvegrt-bezei. " Packing Type Description
*& Receipt Date
read table ieket into weket with key ebeln = v_ebeln.
xrcpdt = weket-eindt.      " Receipt Date
*& Report Total
tmenge = tmenge + xmenge.
tvalue = tvalue + xvalue.
*& Serial No. increment
endloop.
=====================================================================
Thanks and Regards,
Yogesh Pathak

Did you debug and check the umber of values in internal table before calling the TABLE Node....
seeing all SELECT SINGLE along with WHERE = condition and no loop call on them, my assumption is there will be on record only. Check in Debug mood. Search forum to find how to debug a smartform.

GET OBJEC and GET PERNR

I am new to ABAP-HR.......
what is the difference between GET OBJEC and GET PERNR.
Iam asked to write a program using logical databases .. which one should I use ...
thanks,
shekhar....

Hi Nevali.
I would like to suggest,
OBJEC - Work Area for Database PCH
PERNR - HR Master Data Reporting - PNP
Differences,
GET OBJEC - Reporting on Personnel Planning data
GET PERNR - Reporting on HR master data.
I would like to suggest a Reference,
[SAP HELP - Standard Reference for HR Logical Databases|http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/content.htm]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

To get the DB table name used by CRM_UI_FRAME to store data.

Hi All,
Can anyone plz tell me how to get the DB table name used by the CRM_UI_FRAME to store data .Actually its a Ztable.
Or else where to put the debug poin in order to get that.
Thanx
Abhishek

Hi Abhishek,
CRM_UI_FRAME is the name of the main BSP Application which generates the WEB UI in the CRM system. If what you are searching is a Ztable, search it in your CRM system.
Regards,
Bhavana.

Best approach to get the source tables into Target

Hi
I am new to Goldengate and I would like to know what is the best approach to get the Source tables to be replicated into the target (oracle to oracle) before performing the initial load without using exp/expdp . Is there any native Goldengate utility which i can use during the initial load or before that will create the tables on the target before loading the data ?
Thanks

i dont think so, for the initial load replication your struncture should be available at target machine. once your machines are in sync then you can use goldengate ddl setup for automatically replicate the table with data.
Batter approach for you to create a structure on target machine using export improt. In export use conect=metadata_only for copy the structure only.....
like
EXPDP <<user>>/<<password>>@connection_string schemas=abc directory=TEST_DIR dumpfile= gg.dmp Content = metadata_only logfile= gg.log

What table where i can find the errors in Sales Order

hi,
what table where i can find the errors in Sales Order. here's my situations, I need to create a abap report of CRM sales order not replicated to R/3 and show what's the error. I can't find the actual error in CRMD_ORDDERADM_H and CRMD_ORDERADM_I. I also tried calling program "CRM_ORDER_READ" but the program doesn't display/returns error's on header and item level.
please help.
earl g. faren

hi,
what i need is a table where i can find the sales transaction errors. I'm doing a abap report to list down sales transactions with error(s). I checked the table CRMD_ORDERADM_H and CRMD_ORDERADM_I but there's no field for transaction errors.
please help me find a table where I can link the tables above to get the specific errors for a sales transactions.
thanks alot.

Get Objec - what tables

Similar Messages

Maybe you are looking for