Get server date and user account to display them in two display items.

Hello,
I would like to get the server date and the curent Oracle user account to display them in two "display items" in my form. So, If someone can help me, I will appreciate it.
Thanks!

There's nothing to fetch. You assign the value from the function GET_APPLICATION_PROPERTY(USERNAME); as you would any value returned from a function.
DECLARE
myVar VARCHAR2(50);
BEGIN
myVar := GET_APPLICATION_PROPERTY(USERNAME);
END;Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks!

Similar Messages

Mavericks server alerts and User account questions

Hi
I'm looking for more detailed information about setting up Alerts in Mavericks Server, plus I seem to have a strange problem with new user accounts when setting up.
More Info.
I have a Mac Mini acting almost 100% exclusively as a Time Machine backup device with encryption of three portable computers on a wired network. This was originally set up three years using Snow Leopard Server and a 2Tb external FireWire Drive.
The external drive is now proving too small, and in any case is showing the possible first signs of failure when tested, so the intention is to replace it with a RAID of some sort, probably a 2-drive RAID 1 device but if the budget allows we might be able to look at RAID 5 or 6 units.
It seems a good opportunity to clean install Mavericks Server on the Mini, so I've set up a test station on my MacBook Pro with my Mac Pro (both running 10.9.2) as a test backup client. The Server OS is on an external FireWire boot drive, and the TM backup folders are on another external, in this case a USB 3.0
For obvious reasons there does not seem to be any reason to turn on more services than absolutely necessary, so just Time Machine and File Sharing for the moment. All works well but I can't seem to get Alerts working. I've listed 3 different eMail addresses (all mine) for the alerts to be sent to, and I have two Admin Accounts for Notifications, both using the same AppleID I set the Server software up with. I've gone through the rather sparse setup help information carefully, and there is no information about additional services being required, although I did try setting up the Mail client (tested sending and receiving) on the Server and having it running whilst the backups were being tested.
As I said, the test backups went fine and when I disconnected the backup drive from the Server to simulate a failed drive the TM on the Mac Pro client showed an alert saying the backup drive could not be found. However, there were no emails or Notifications received, either on the Mac Pro or my iPhone from the Server.
There seems to be minimal amount of information available about the workings of Mavericks Server, but I have gone through what I can additionally find online about Mountain Lion Server, with no real indication of what it is that I am missing. The only instructions seem to be exactly what I've done, so your advice would be appreciated.
Another thing that puzzles me, is that when restarting the MacBook Pro I get all the Admin and Standard User Accounts (created in Server.app) showing at the login screen. This is only four Accounts in total, so what would happen if this was 50 Users? If I click on the 'User' tab in Server.app I get 83 User Accounts showing, but that was not the case until this evening, as only the Admin and Stardard User Accounts I had set up were visible.
It's obviously possible that I've mucked up the install and basic setup somehow, but I can't see that anything I've done would have these effects as I've been careful to follow the options put in front of me.
Thank you in advance.

There's nothing to fetch. You assign the value from the function GET_APPLICATION_PROPERTY(USERNAME); as you would any value returned from a function.
DECLARE
myVar VARCHAR2(50);
BEGIN
myVar := GET_APPLICATION_PROPERTY(USERNAME);
END;Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks!

How to get server date and time using java code

Hi,
I'm new to java. I have one doubt about getting date and time of the server. can anyone give some sample code to get that.
thanks in regards
Gopi.

you need 2 things
1. something on the application server which exposes the servers time/date
2. something on the client which makes use of your time service
for instance, you could write a ServerTimeServlet that clients can call to get the time according to the server. or, if you've got a database in the server, often database software will provide a Time procedure or similar that does this, so you can use a simple SQL query to get the latest time

Getting the date and time from NIST server

I need to be able to get the date and time in an app and cannot trust the device's clock since the user could change it. Has anyone got an example of how to access an Internet time server such as the NIST servers from AIR for iOS?

What is the best way to get the date and time?
ThanksI am not sure that this is the best way. But one of the ways.
<code>
java.util.Date d = new java.util.Date();
System.out.println("date is "+d.toString());
</code>

How can I get the date and time and display it on the report main page?

Gurus,
How can I get the date and time and display it on the report main page?
Thanks!

Hello,
You can create a Formula Colum returning a date :
function CF_1Formula return Date is
begin
RETURN(SYSDATE);
end;
Put a Field in the Layout having this formula column as source .
Regards

SQL Query to put end date to user account from Backend.

We are using Oracle Apps 11.5.10.2. with oracle 9i Database.
I want to put end date to user account who has left a week ago, (Responsibility ->Sysadmin - Go to : User)
i cannot give the enddate as sysdate, i need to put the end date (25-JUN-09) from back end.
I want a query so that the workflow tables also get updated accordingly.
Regards,
Jenny

Yes i can give the back dated end date, but when i check the record history from Front end,
(Help ---> Record History) These details are not updated , they will show the Updated By : username and Updated Date to sysdate and not the back dated date given.

Difference Between Service Account and User Account

What is the Difference Between Service Account and User Account

Hello Mohit,
Basically there are two types of approches which you should understand.
In many environments, administrators prefer to simply create a domain user account and assign appropriate privileges to it. Then this user account is used in order to start a specific service on a computer.
In that case there is really no difference between a user account and the so called service accounts. Since this service account is simply a domain user, all the task related to managing the domain users apply to it. For example you
should keep the password up to date manually. Some environment move step forward and assign
Deny Logon Locally of this type of service account in order to enhance the security.
The second concept is Managed Service Accounts. There are plenty of differences between a Managed Service Account and a User Account.
The Display Icon is different from a view perspective.
The type of object is different.
Managed service accounts password management is automatic.
You can not create Managed Service Accounts using GUI. They are only created using Powershell.
You can refer to link below for more inormation:
Service Accounts Step-by-Step Guide
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Can't Change Lock Screen Background Image and User Account Picture in Windows 8.1.

I am running Windows8.1 Single Language with windows activated. Upgraded from Window 8 to Windows 8.1.
Lenovo Y410p.
4th generation Intel® Core™ i7-4700MQ (2.40GHz 1600MHz 6MB) with 16GB RAM.
NVIDIA® GeForce® GT750M 2GB .
I tried all methods that I found on web included :
1. http://www.askvg.com/fix-cant-change-lock-screen-background-and-user-account-picture-in-windows-8/
2. http://answers.microsoft.com/en-us/windows/forum/windows8_1-desktop/lockscreen-issues-on-windows-81/c51f570a-7a69-4e92-8348-3ebbed778592
3. I deleted the C:\ProgramData\Microsoft\Windows\SystemData file and folder
4. I restored the Libraries Features.
5. I run SFC / Scannow 3 times but get no error.
6. I created a new local account but the same problem shows up. (I'm using live for main account.)
Now, Please tell me what should I do, Thanks.

Hi,
First of all, please run the command slmgr.vbs /dlv
After that, check the License status if it is licensed.
Is there any error message when you couldn't change lock background or this option just grey out?
Roger Lu
TechNet Community Support

I just upgraded my ipad OS and now my ipad is not picking up the 3G network. Why and how do I fix this? When I go into cellular data and view account it says my ipad is activated and ready to go. What gives???

Why and how do I fix this? When I go into cellular data and view account it says my ipad is activated and ready to go. What gives???
It was working fine up until I upgraded the OS which I hadn't done in many versions so the ipad was not working as well as it should. Now it is searching for the network.
.

Hello noodles074!
Let's get your device working again! It's possible that your device just needs to be reprovisioned on our network. Please go to Settings>General>Reset>Subscriber Services>Reprovision Account. This may take several minutes. After allowing about 5 minutes for completion, please power your iPad off and back on, and test it again. Let us know if this takes care of it!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Can you export the date and user to Excel that appears into a Comments field in a tracking list?

Hi everyone,
Can you export the date and user to Excel that appears into a Comments field in a tracking list?
When i export a tracking list with a Comment field in the Content type, the screen where you enter the data for an item, the Comments field just export the text of the comment into the Excel file.
In the Comments field appears also, besides the comment text, the user and date from who and when the comment is added.
Is there a way to export also the user and the date?
Thanks
Wim

create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
updating that field with the new comments (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
Please refer few more links: Hope they will help
http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
http://community.office365.com/en-us/f/154/t/278560.aspx
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Get the date and time from iframe.

Hi,
Am using jdeveloper 11.1.1.6.0., I have used the following iframe source which gets the date and time.
<af:form>
<iframe src="http://free.timeanddate.com/clock/i3xb4nm0/n1722/tt0/tw0/ts1" frameborder="0" width="244" height="19">
</iframe>
</af:form>
I need to get the date and time separately to perform some validation. How can i get it.
regards,
Prasad K T,
9840021070

Prasad,
I don't understand your use case. The url you use is a json web service which returns it's result as either xml or json payload. Why do you pretty print this as a web page and try to get to the result this way?
Why don't you get the result directly using the json result or (AFAIK) the java script api which the service also provides. Check the documentation of the service.
From your description I understand that the user enters a time. You need to know if the time is before or after 2:30pm and have to set a 'shift' to A or B.
Where do I need a timeservice in this validation?
From what I see your approach won't work. As I still don't understand the use case I don't know how to help.
Timo

Gettig server date and time

how can i get the server date and time and to storage it in a time and date variable?
please send me full code, i�m new programing in java.
thank you very much,
luis torres.

here is the point.
I WANT TO CHANGE THE FOLLOWIING LINES TO DO NOT TO CAPTURE THE TIME ( "HORA" IN SPANISH), I WANT TO GET THE SERVER TIME AND PUT IT DIRECTLY INTO THE : pc_Checadadiariaaddtest.altachecadadiaria.HORA FIELD.
THIS IS THE CODE I WANT TO CHANGE, PLEASE HELP ME:
/tr><tr>
     <td align="left">Hora: /td>
     <td style="width:5px"> </td>
     <td><h:inputText id="text1" value="#{pc_Checadadiariaaddtest.altachecadadiaria.HORA}" styleClass="inputText" >
<f:convertDateTime/>
</h:inputText>
</td>
</tr>
GIVE TO ME THE EXACT CODE I NEED TO WRITE. PLEASE.
THANK YOU VERY MUCH FOR YOUR HELP.
LUIS TORRES
MEXICO.

When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

Check for Updates and User Account Control

With Adobe Reader the 'Check for Updates' function under Help does not appear to function when 'User Account Control (UAC)' in Windows Vista is turned on.
When UAC is turned off, the 'Check for Updates' works, and if there an update is available for Adobe Reader, it will download and install.
Other programs that update software funtion with UAC turned on, albeit with the additional dialog boxes that UAC brings, namely the CTL/ALT/DEL and user account logon (when applicable.)
Without updating the Adobe Reader software, users are leaving themeselves open to vulnerabilities. Without UAC turned on, users are also leaving themselves open to certain risks. So there appears to be a dilemma presented.
Does anyone know if/when Adobe will be changing the 'Check for Updates' functionality so it will behave more in-line with the UAC functionality?
Thank you in advance for your time and attention.

With UAC enabled, I start Adobe Reader, click on Help, and there is no selection for updating. There is nothing for me to click. Additionally, in Edit, Preferences, Updater, "Do not download or install updates automatically" is selected, and everything on the right pane is greyed-out.
With UAC disabled, I start Adobe Reader, click on Help, and there is a selection for 'Check for Updates.' In Edit, Preferences, Updater, I can select the various methods of downloading/updating Adobe Reader. The option to download the update but not install was selected, as I wanted it to be.
Finally, I noticed that the notice from Adobe, 'Update is ready to install,' appears in the Windows tray. And it is this point that somewhat changes the serverity of the problem, that is, while 'Check for Updates' is not available when UAC is enabled, it appears that Adobe can still be updated through the automatic download feature. The only problem with this is that I cannot tell if the update was downloaded while UAC was enabled (probably not since the download setting says not to) or while UAC was disabled.
In any case, it still does not appear that our clients can get their Adobe Reader software updated while UAC is enabled. And this represents a security dilemma for us.

To get first date and end date after entering any month and year

Hi,
I need to to get first date and end date of a month and year in yyyyMMdd format. I am reading month and year from a properties file. But I don't know how to get the first date and End date in given format. The properties file gives me just text. But I don't know how to get the date format using this. I need this urgently. Can anyone help me to get code for this?
I am reading the fields as,
Properties props = new Properties();
props.load(new FileInputStream("AnyMonthVolume.properties"));
String date_month = props.getProperty("date_month");
String date_year = props.getProperty("date_year");
Thanks.

I know this has been posted a while ago but incase someone looking for it, here is the code to get the end of current month date.
Calendar cal = Calendar.getInstance();
     cal.setTime(new java.util.Date());
     cal.set(Calendar.DATE, 1); //set the date to start of month
     cal.add(Calendar.MONTH,1);
     cal.add(Calendar.DATE,-1);
System.out.println(cal.getTime());

Get server date and user account to display them in two display items.

Similar Messages

Maybe you are looking for