Get started with web service API

I have a test installation and I can run the web service calls using the URL https://myserver.com/sgd/admin/apitest/. I can authenticate and start a session and open an application using this apitest fixture.
I can't find any documentation about using the web service API beyond the javadocs. Can someone tell me the default web service endpoint so I can download the wsdl? Are there any examples or tutorials out there for writing a web application that calls the web service APIs?

The documentation was published on the Sun Wikis at http://wikis.sun.com/display/SecureGlobalDesktop/Web+Services+Home+Page This is no longer available.
There are examples under:
sgd/examples/* (user examples)
sgd/admin/* (administration examples)
The basic sequence for a user application is:
- authenticate
- setTCCConfiguration
- startTCC
<do your thing>
- endMultiViewSession
Those calls are all on WebtopSession.
"<do your thing>" might be
- display a webtop (WebtopContent)
- launch an application (EmulatorSession)

Similar Messages

Getting started with web services

I am using NetBeans IDE 6.0. I have tried a couple of tutorials but can't seem to get to the point where I can test a web service. I have added the JAX-RPC libraries and added local and remote web services with and without proxy settings but always get the error below when I try to test a web method. Based on responses to other posts with this error message I tried deploying a "hello world" web service with anonymous access on the same server as the client with no luck.
InvocationTargetException org.netbeans.modules.websvc.registry.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:540) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.invokeMethod(TestWebServiceMethodDlg.java:466) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.access$500(TestWebServiceMethodDlg.java:92) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg$3.run(TestWebServiceMethodDlg.java:409) org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:561) org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:986) Next Exception Layer null sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:597) org.netbeans.modules.websvc.registry.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:534) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.invokeMethod(TestWebServiceMethodDlg.java:466) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.access$500(TestWebServiceMethodDlg.java:92) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg$3.run(TestWebServiceMethodDlg.java:409) org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:561) org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:986) Next Exception Layer Could not initialize class com.sun.xml.internal.messaging.saaj.soap.SAAJMetaFactoryImpl sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) java.lang.reflect.Constructor.newInstance(Constructor.java:513) java.lang.Class.newInstance0(Class.java:355) java.lang.Class.newInstance(Class.java:308) javax.xml.soap.FactoryFinder.newInstance(FactoryFinder.java:38) javax.xml.soap.FactoryFinder.find(FactoryFinder.java:165) javax.xml.soap.SAAJMetaFactory.getInstance(SAAJMetaFactory.java:61) javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:127) javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:93) com.sun.xml.rpc.soap.message.SOAPMessageContext.getMessageFactory(SOAPMessageContext.java:200) com.sun.xml.rpc.soap.message.SOAPMessageContext.createMessage(SOAPMessageContext.java:131) com.sun.xml.rpc.client.StreamingSenderState. (StreamingSenderState.java:30) com.sun.xml.rpc.client.StubBase._start(StubBase.java:92) webservice.ServiceSoap_Stub.helloWorld(ServiceSoap_Stub.java:54) webservice.ServiceClient.servicesoapHelloWorld(ServiceClient.java:22) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:597) org.netbeans.modules.websvc.registry.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:534) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.invokeMethod(TestWebServiceMethodDlg.java:466) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.access$500(TestWebServiceMethodDlg.java:92) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg$3.run(TestWebServiceMethodDlg.java:409) org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:561) org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:986)

Hello
Actually i m also pretty new in Web service ,i have tried to implement web-service on weblogic server 8.1.i have just implement one web-service programm but it is a very simple,i m writting code and exmplaination how to delpoy it.
(1)create a new project.(web service type)
(2)create a web-service programm give name like JSK.jws
public class JSK implements com.bea.jws.WebService
static final long serialVersionUID = 1L;
* @common:operation
public void Helloworld()
System.out.print("Hello Jay Shree Krishna");
(3)right click on that JSK.jws ,u will may be find one option Generate WSDL file ,click on that option so WSDL file generate automatically.
(4)Build that application.(option is already on netbeans IDE).
(5)Than Build EAR.
(6)Now Delpoy JSK.ear file on server.
(7)After sucessfully delploye,look in last line on WSDL file,you will find
url::
Examples
*<port name="JSKHttpPost" binding="s0:JSKHttpPost">*
*<http:address location="http://localhost:7001/First_ws/First/JSK.jws"/>*
(8)Open a browser and give this Url::*http://localhost:7001/First_ws/First/JSK.jws*
You may be get output.
I hope that this programm usefull for you.

Need some help getting started with Mobility Services Engine

Someone has ordered several 3602 access points, a 5508 controller, and a MSE 3310 for one of our remote locations. The access points and controller are in place and are working fine (we use lightweight APs at many other locations), but I'm not sure how to approach the MSE. I've gone through the set up, and it's onsite, on the network, and I've added it to our WCS server. It's got a 2000 user context-aware services license. But I'm not sure where to go from here. It doesn't seem to actually be doing much of anything. Is there some quick start guide as to where to go from this point? The wireless users are mostly mini netbooks and iPads.

Well, I'm no expert, but I did spend the night...
Ok. In the WCS on the Services tab, Mobility Services, your MSE is recognized and reachable with matching SW Versions.
So, on the home tab, ContextAware tab, you see your MSE and it is showing Zero's for data in most if not all fields?
Back to the Services tab, Synchronize Services... is this empty?
The MSE can only 'SEE' what you tell it to 'LOOK' at. That is, buildings and floor areas. I haven't tried just a building.
Check the left hand box for all the floor areas of interest. Scroll to the bottom an slect 'Change MSE Assignment"
select which (of the many or the one) MSE you wish to have monitor the area. Check the 'CAS' box and save.
Up on the upper levt is a Synchronization block.. push the Synchronize button and sit back..
All MSE data is presented only to the WCS (or Pi).
Good Luck
David

Getting started with web start

Hello All,
I am a newbie to the Java Web Start technology and am trying to do the following:
We have a desktop application that we are trying to convert to a Web start. The source code of the application consists of some Jar files and some configuration files. In order to convert the application to a web start, we are writing a JNLP file for this application. As part of the JNLP file, we are trying to provide each of the jars using the jar element under the resource tag. But how do we specify the configuration file in the JNLP ?
Certain classes in the source code look for these configuration files. Currently since the configuration files are not being provided in a proper manner there is an exception that is being thrown.
Is it enough if we write a JNLP file for converting a desktop to a web start? Or do we need to write java web start specific code as well? And how do we provide configuration files as a resource in JNLP?
Any suggestions or guidance would be of great help.
Thanks and Regards,
Sampath MS.

>
Where are your configuration files located and what type of information is in them?
I would suggest one of two options:
1) Have a "default" config file inside your jar file which you load using Class.getResourceAsStream() -- this will have default configuration details. Then, if the user chooses to change the configuration you can write a different config file to their user.home dir which will over-ride the defaults.
..>
>
The configuration files are placed in the same location as the codebase.>That is extremely non webstart compatible. Sun regards the location of the JWS cache to be no business of applications, so even if you could put it there, it would be difficult, if not impossible, to figure the location to access it.
The best approach to this type of problem is kid_wonder's approach 1), though besides writing to user.home or the registry, you can also access the [PersistenceService of the JNLP API|http://pscode.org/jws/api.html#ps] to store the changed details.
>
The issue is that the location of the files is difficult to change as it will need a modification in the code as well.>You will need to bite the bullet and change this code, to deploy it successfully using webstart.

Getting started with WEB reporting

HI, I am working on SAP 4.7 version. I have released my reports through transaction SMW0. Please let me knwo now how do i view and run my reports on web?.....
also what URL to type in the adress bar to view the same....
Kindl help... its urgent!

Hi Raja,
With reference to your post above, i tried to execute a report (Transaction) with WEBGUI.
1st Method: Call a Transaction
https://hqd07sd01g1.hq.network.corp:8443/scripts/wgate/webgui/!?~transaction=ZBER
Name of the Transaction : ZBER
Web Browser : IE 6.0
Error: "404 Not Found"
2nd method: Call a Report
https://hqd07sd01g1.hq.network.corp:8443/scripts/wgate/webrfc/!?_function=www_get_selscreen&_report=ZMMR_BID
Name of the Report : ZMMR_BID
Web Browser : IE 6.0
Error: "404 Not Found"
Note: Do i need to enable RFC for 2nd method?
Could you help me to identify where am i going wrong?
Appreciate your help in advance.
Thanks,
Shankar K.

Help Needed with getting Started With Office 365 Development C# Rest API

We have a O365 Tenant Setup with a Federated Active Directory Setip we want to be able to right code that will connect to our tenant and perform basic CRUD operations against it (ex. Creating mail boxes)
The problem is we want this to be contained in a CLR trigger In SQL so say if a new user is added to our user table then we would create a new AD account for that user and also create a mailbox.
But I cannot find and example on how to connect to Office 365 using the REST API (Not the SDK because you can not add the connected service to a class library) and before the required actions that we need to do. All the example I have found are with the
SDK API and/or require window 8 and that is also not an option.
Please help I do not know where to start, and I would love to see some examples done in c# and not using the SDK.
Thanks,
Andrew Day

Hi,
>> Instead of SharePoint URLs I would use the O365 API URL?
Yes, in my sample code, I was accessing the File resource by using the O365 File API. In your case, you need to acquire the token to access the Mail resource and use O365 Mail API.
By the way, I think the article
Understand Office 365 app authentication concepts will help you to understand the authentication process in Office 365 Development.
>> Why can I not use the SDK API with a class Library?
Actually, you are able to reference the Office 365 .NET SDK in the class Library. But the class library project type was not supported by Visual Studio Office 365 Development Tool. As a workaround,
you can reference the SDK manually in your project.
Since your original question is about “getting started with Office 365 Development C# Rest API”, if you have more questions about the Office 365 SDK, I will suggest you posting a new thread
to discuss the Office 365 SDK. It will involve more other community members to share their ideas and experience on a specific a question and for others who had a similar question could also find the valuable information quickly.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How get data from Web Service with token?

Can I get data from Web Service made with Java?
This WS has a Token.
Any ideas o reference?
Regards!
Fran Díaz | twitter: @frandiaz_ | Blog: {geeks.ms/blogs/fdiaz/} | Communities: {onobanet.es} & {secondnug.com}

We've now added this ability to Web.Contents. You can say something like
Web.Contents("http://my.web.service/1", [Headers=[#"The-Token"="0a0138ef2d"]])
and it will pass a header with the key "The-Token" and the value "0a0138ef2d" as part of the HTTP request. For security reasons, this will only work for anonymous web requests.
The December preview can be downloaded from
http://www.microsoft.com/en-us/download/details.aspx?id=39933&WT.mc_id=blog_PBI_Update_PowerQuery

How to disable "getting started with Firefox" web page when starting Foxfire?

Every time I open Firefox I get the additional web page "getting started with Firefox" and do not know how to disable it. Can you help?

The page may be set as an additional home page, the following link shows how to check and set your home pages - https://support.mozilla.com/kb/How+to+set+the+home+page

Web Services API Sample w/ Filters

Does anyone know how to use a Filter in a doOracleSearch call using the Java proxies supplied for the Web Services API? I tried doing this but it appears there is a conflict with Servlet Filter class. When I used the complete path to the class, it compiles, but upon deployment and execution on OC4J I get a symbol not found error. Here is an excerpt of the problem code:
if( query != null && search_type.equals("advanced") )
String str_doc_type = request.getParameter("document_type");
int start = orderByDate ? 1 : startIndex;
int hits = orderByDate ? recencyHits : pageHitCount;
oracle.search.query.webservice.client.Filter[] myfilterArray = null;
oracle.search.query.webservice.client.Filter filterDocType = new oracle.search.query.webservice.client.Filter(112,"string","equals","4918");
myfilterArray[0] = filterDocType;
try
res = ctx.doOracleSearch(
query, // query
new Integer( start ), // start index
new Integer( hits ), // documents requested
Boolean.TRUE, // duplicates removed
Boolean.FALSE, // duplicates marked
groups, // data groups
locale.getLanguage(), // query language
null, // document language
Boolean.TRUE, // return count
null, // filter connector
myfilterArray, // filters
null // fetch attributes
catch( Exception e )
searchException = e;
}

Hi,
I am trying to deploy this sample application. I received the following error:
[oracle@dev1 home]$ /home/oracle/oracle/product/10.1.8/ses1/jdk/jre/bin/java -ja
r /home/oracle/oracle/product/10.1.8/ses1/oc4j/j2ee/home/admin_client.jar deploy
er:oc4j:dev1.psa:5740 oc4jadmin oraidev1 -deploy -file /home/oracle/oracle/produ
ct/10.1.8/ses1/oc4j/j2ee/OC4J_SEARCH/applications/sample.ear -deploymentName ses
_query -bindAllWebApps http-web-site
08/05/20 11:20:29 Notification ==>Application Deployer for ses_query STARTS.
08/05/20 11:20:29 Notification ==>Copy the archive to /home/oracle/oracle/produc
t/10.1.8/ses1/oc4j/j2ee/OC4J_SEARCH/applications/ses_query.ear
08/05/20 11:20:29 Notification ==>Initialize /home/oracle/oracle/product/10.1.8/
ses1/oc4j/j2ee/OC4J_SEARCH/applications/ses_query.ear begins...
08/05/20 11:20:29 Notification ==>Unpacking ses_query.ear
08/05/20 11:20:29 Notification ==>Error while unpacking ses_query.ear
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:112)
at java.util.jar.JarFile.<init>(JarFile.java:127)
at java.util.jar.JarFile.<init>(JarFile.java:92)
at oracle.oc4j.util.FileUtils.unjar(FileUtils.java:309)
at oracle.oc4j.util.FileUtils.autoUnpack(FileUtils.java:488)
at com.evermind.server.deployment.EnterpriseArchive.<init>(EnterpriseArc
hive.java:234)
at oracle.oc4j.admin.internal.ApplicationDeployer.initArchive(Applicatio
nDeployer.java:412)
at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDe
ployer.java:187)
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:93)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun
(OC4JDeployerRunnable.java:52)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(Deplo
yerRunnable.java:81)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:534)
08/05/20 11:20:29 Notification ==>Operation failed with error:
Unable to find/read file META-INF/application.xml in /home/oracle/oracle/product
/10.1.8/ses1/oc4j/j2ee/OC4J_SEARCH/applications/ses_query (META-INF/application.
xml)
Deploy error: Deploy error: Operation failed with error:
Unable to find/read file META-INF/application.xml in /home/oracle/oracle/product
/10.1.8/ses1/oc4j/j2ee/OC4J_SEARCH/applications/ses_query (META-INF/application.
xml)
Please help!!
Thanks!
Regards,
Deva

Process for adding a boolean option to the web service API

Hey guys,
Here's a little background:
I'm currently working on adding an optional "strict" mode to some of the unmarshalling functions in SchemaMarshaller that will throw exceptions when receiving bad data for certain fields, and also improving the date handling while I'm at it (I want null instead of mangled dates when receiving bad data when strict mode is off).
This is for my benefit at the moment as I'm tired of spending time debugging Flex code when XFire and Oracle are spitting out rubbish (like empty xsd:DateTime nodes, DateTimes in xsd:Date nodes, etc) - but I'm sure other people would like to use it too while we don't have a response validator, so I'd like to do it in a way that I can submit as a feature request (with patch) on Jira.
My questions are about the procedure for stuff like this- where should this option be made public in the API, and who would I talk to about it? Or would it be best for it to always be strict? - That's how I'd like it :) Perhaps it should just log errors when it encounters bad data?
This is the first thing I'd like to "add" to the SDK rather than a simple bug-fix, so I just want to do things in a kosher manner. Sorry if I come across like a total noob :)
Cheers,
-Josh
"Therefore, send not to know For whom the bell tolls. It tolls for thee."
:: Josh 'G-Funk' McDonald
:: 0437 221 380 ::
[email protected]

Hey Josh, I'm swamped at the moment but appreciate your interest and your contributions to Flex and WebServices thus far. I'll try and get some time to look into your specific request and what you're hoping to do at the code level, but to answer your question about test cases, you should consider the NIST testsuite for XML Schema datatypes. BlazeDS has historically maintained the WebService implementation, so it appears their test case for NIST based schema tests starts out here (and refers to many data type test cases in the /nist subdirectory). http://opensource.adobe.com/svn/opensource/blazeds/branches/3.0.x/qa/app s/qa-regress/testsuites/flexunit/src/tests/flexunit/xml/NISTXMLSchemaTes t.as Pete ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Josh McDonald Sent: Tuesday, July 08, 2008 8:21 PM To: [email protected] Subject: Re: Process for adding a boolean option to the web service API A new message was posted by Josh McDonald in Developers -- Process for adding a boolean option to the web service API Yeah I knew it'd have to be somewhere outside of SchemaMarshaller, as it's [ExcludeClass] anyway so end users don't see it, nor is it documented in the api docs. Just wasn't sure where it should be. I'll have a think about it some more when I get some down time to work on it, but webservice was where I was thinking it should be too. Didn't think about having it settable on operation as well though, so thanks for that :) Anybody know a good source of valid values for various XSI types (date and DateTime mainly) for testing purposes? Or even who I should contact to get access to that sort of thing? I assume the W3C will take 6 months to answer me, and the answer will be "buy our $10,000 compliance testing suite" or something along those lines. -Josh On Wed, Jul 9, 2008 at 9:46 AM, Matt Chotin <[email protected]> wrote: A new message was posted by Matt Chotin in Developers -- Process for adding a boolean option to the web service API I think for a top-level user option I would put the new option on the mx.rpc.soap.Operation class (I think that's the name). You'd then have that propagate through to the underlying schema classes as they are used. I'd then also add an option to the WebService class itself, and basically in the Operation it should see if it has its own value set and if not check the value on the WebService. We do this for a couple of other flags too I think. End users in general wouldn't look at any classes other than the WebService and maybe the Operation classes, so asking them to set options on the schema classes themselves probably wouldn't work. Matt -- "Therefore, send not to know For whom the bell tolls. It tolls for thee." :: Josh 'G-Funk' McDonald :: 0437 221 380 :: [email protected] ________________________________ View/reply at Process for adding a boolean option to the web service API <a href=http://www.adobeforums.com/webx?13@@.59b5be89/1> Replies by email are OK. Use the unsubscribe <a href=http://www.adobeforums.com/webx?280@@.59b5be89!folder=.3c060fa3> form to cancel your email subscription.

Web Service API v.3 overview

Post Author: yura.tkachenko
CA Forum: Nsite
There are a lot of calls available in Web Service API v.3, here is list of functions:
login (create WS API session which is valid 15,30,60 minutes -
actually depends of company settings). Return back to user generated
unique sessionId, serverUrl (usually you need pass serverUrl as a new
endpoint of WebService). But we are recommend do not use serverUrl better use cookie-based approach (on client side you need to tell your soap stack to maintain cookies).
logoff - finish active session (requires sessionId parameter)queryObject - return EnterpriseObject data (instances). Using that call you can query headers, detail sections, apply pagination for both headers, details. Also you can query such administrative objects: Company (company information - as one user can belong only to one company so at any time you can query only one record), User (list of users settings), Attachment (using that object you can query any attachment assigned with any Enterprise Object). insertObject - add new record to EnterpriseObject, User (only if you are administrator in the company), Attachment (add new attachment)updateObject - edit existing objects: Enterprise Object(headers, details), User (change your profile, edit profile of other users if you are administrator), Company (edit company settings), Attachment (edit attachments).deleteObject - delete : Enterprise Objects or edit Enterprise Objects (deleting row in detail section), Attachment (delete attachments). Nsite doesn't support deleting such entities from system as: User, Company.copyObject - copy exiting Enterprise Object (instance) to another instace with all nested (details, attachments, header fields).describeObject - retrieves full meta description of Enterprise Object (header fields, detail sections, relationships with other EOs). Also this method retrieve description about administrative objects: Company, User, Attachment.describeSystem - retrieves company settings (Company object). You can simulate this call using queryObject operation.getObjectsList - retrieves list of available EnterpriseObjects and administrative objects.getUsersList - retrieves list of company's users.describeUser - retrieves user specific information (User object record). You can simulate this call also using queryObject operation.getCompanyLookups - retrieves available lookups for current company.getLookup - get lookup values and general information about lookup by lookup path. Usually lookup path is assigned to drop-down in Enterprise Object definition. So sometimes very useful to know what values acceptable by EnterpriseObject1 in drop-down1.createLookup - add new lookup to system. This lookup will be available automatically in the Application Designer or others tools.updateLookup - change lookup values etc.uploadAttachment - assign new attachment with "Attachment" component of EO or with "Attach" button (global attachment). This function using DIME attachments - so you need to be sure that your soap stack support this method. You can upload attachments also using insertObject (using Attachment object), but this call work faster for big files.downloadAttachment - download attachment(assigned with "Attachment" component or "Attach" button) using DIME attachments. The same behavior can be reproduce with queryObject call, but this call work faster.describeRouting - get information about any routing in the nSite system. You can get information like: routing status, list of participants, etc.routeEO - start routing mechanism for Enterprise Object.approveEO - approve routing. Current user should be approver.rejectEO - reject routing. Current user should be approver.stopEO - stop routing. Current user should be initiator of routing.We have such limitation of our API:Doesn't support running Business Rules if something was changes in EO instance using calls: insertObject, updateObject, deleteObject.Doesn't support Enterprise Objects which is marked as "version enabled" in Application Designer.Doesn't support forwarding of routings.Doesn't support to modify EnterpriseObject structure (definition).Doesn't support manipulations with Roles Based Access Component.

Post Author: yura.tkachenko
CA Forum: Nsite
Hi, saxotechpm
saxotechpm:
Is there support for inserting an object that has lookup relationships to other objects:
Using the WSAPI I have tried to insert an object that has a lookup relationship to another object for pulling a number of fields.
The insert works if I set the appropriate object id for the linker eo on the lookup button field, however none of the data fields from the linked eo are drawn into the object.
I have also tried running an update with the following syntax. The update works on non linked fields but the linked object data elements are never updated.
The following NEOQLsyntax is used:
update eo_60700 set button_select_contact=721238,button_select_account=721237 where Id=731033;
721238 = an instance of a contact object
721237 = an instance of an account object
731033 = the target instance object being updated - the expectation is that this object would get the data elements linked from the two other instances.
Thanks
Yes, we do support of linked Enterprise Objects in WSAPI for detail sections and for header fields. But due to some internal issues headers are not work properly. But now everything is OK. It has been fixed and it will take some time while you will be able to use it on production. But this fix will be delivered in the nearest patch. So in the October you can use this feature already on production.
Thanks for your request and sorry for any inconveniece.

ExtractToXML exception with web services

Guys
I´ve got "An unexpected exception was encountered: There is an error in XML document" when execute the "Quick Start: Decoding barcoded form data using the web service API" (http://livedocs.adobe.com/livecycle/es/sdkHelp/programmer/sdkHelp/wwhelp/wwhimpl/js/html /wwhelp.htm). Curiously the "Quick Start: Decoding barcoded form data using the Java API" (http://livedocs.adobe.com/livecycle/es/sdkHelp/programmer/sdkHelp/wwhelp/wwhimpl/js/html /wwhelp.htm) run succesfull. Of course I am using the same LiveCycle instalation and the same pdf.
The exception is fired into extractToXML method of BarcodedFormsServiceService class. See a some lines of the code:
//Decode form data
XML decodedFormData = barcodedFormsClient.decode(inPDFForm,
true,
false,
false,
false,
false,
false,
false,
false,
CharSet.UTF_8);
//Convert the data to XDP data
object[] convertedData = barcodedFormsClient.extractToXML(decodedFormData,
Delimiter.Tab,
Delimiter.Tab,
XMLFormat.XDP);
Thanks
Marcelo

Hi Lee :
 
 Many thanks for your kindly reply ...
 
 I am not clearly sure how to check if I have specified the encoding mechanism correctly in form design ... I would like to say in a detail way that I used LC designer to design a PDF form embedded a 2D Barcode and filled in data fields in Adobe reader then print it as a paper form including 2D Barcode ... Faxed this paper form to fax server and put the fax image into a watch folder ( I also created a decode process in workbench ) , I can see the decode output data is OK ( <?xml version="1.0" encoding="utf-8?"?>
and all the UTF-8 Chinese code is OK ) but it will be <?xml version="1.0"?>
and UTF-8 Chinese code not OK if I used web service API to decode 2D Barcode ...
 As to this problem , I think it should not be the form design problem ... and possibly is the web service API usages mistake ...
 
 My .Net program source as :
 
 using System;
 using System.Collections;
 using System.ComponentModel;
 using System.Data;
 using System.IO;
 using System.Text;
 using BarcodedForms.barcoded;
 
 namespace BarcodedForms
 {
 class Decoder
 {
 public string execute(String path, String user, String password)
 {
 try
 {
 //Create a BarcodedFormsServiceService object and set authentication
 values
 BarcodedFormsServiceService barcodedFormsClient = new
 BarcodedFormsServiceService();
 barcodedFormsClient.Credentials = new System.Net.NetworkCredential
 (user, password);
 //Reference a PDF form
 BLOB inPDFForm = new BLOB();
 
 FileStream fsPDF = new FileStream(path, FileMode.Open);
 //Get the length of the file stream
 int lenPDF = (int)fsPDF.Length;
 byte[] bytePDF = new byte[lenPDF];
 
 //Populate the byte array with the contents of the FileStream
 fsPDF.Read(bytePDF, 0, lenPDF);
 inPDFForm.binaryData = bytePDF;
 
 //Decode form data
 
 XML decodedFormData = barcodedFormsClient.decode(inPDFForm,
 true,
 false,
 false,
 false,
 false,
 false,
 false,
 false,
 CharSet.UTF_8);
 if (decodedFormData != null)
 {
 Console.WriteLine("A:"+decodedFormData.ToString());
 
 return decodedFormData.document;
 }
 else return null;

No result while creating a service consumer with Web Service Wizzard

Hi,
I've tried to create a service consumer with Web Service Wizzard in SE80 by using URL/HTTP Destination but nothing happens. After the popup with logondata for the WSDL I get the CRM start screen and nothing has been created in the given package.
technical details:
I use a CRM 5.0 system with SP15 (SAPKB70015).
I created the provider service at a 7.10 system with SP5 (SAPKB71005) via SPROXY, SOAMANAGER and WSPUBLISH and get the WSDL-URL from Service Registry.
The Service Registry of the 7.10 system serves as central Service Registry.
Has anybody an idea ?
Christoph

Guy,
Thanks for your reply.
This problem has been solved. Since I haven't turned on everything that to use transaction SOAMANAGER needs. After complete the switch-on works, the problem never happens again.
Thanks again.

Getting started with an iBook G3?

Hey,
I just got an iBook G3 (500mhz, snow, airport, 10gb hd, upgraded ram), to compliment my iMac (G5 rev c) and I'm a little new.
It was used, I got it via trade.
Does anyone have some tips for me to get started with it ? I'm wanting to upgrade the HD to at least 20 GB, and to max out the ram. Any hints on that ?
Also, where can I get a new battery and charger ?
Also, what else should I know about it ?
It will mainly be used for writing (novel, fan-fics), surfing the web (wirelessly), and when I'm traveling...
Oh, it has OSX10.2 installed.

Hi, Josh. Welcome to Apple Discussions.
How much RAM is installed?
Does it have the original AirPort card installed? (You may want to install one, if not, to enable wireless access to the internet.)
Did the original system CD's and the OS X 10.2 software CD's come with it? If not, try to get the person you got it from to give them to you. You will need them if you intend to upgrade the hard drive (and for maintenance, even if you don't upgrade the hard drive).
Hard drive upgrade services:
MCE Technologies
DT & T Computer Services
A hard drive upgrade is very complicated, and best left to a professional.
Check out the procedure:
http://www.pbfixit.com/Guide/50.12.0.html
http://www.powerbooktech.com/knowledge,name-Hard-Drive,type-6.htm
http://uk.geocities.com/ibookupgrade/
http://sterpin.net/uk/ddibookdualuk.htm
Hard Drives:
Other World Computing
Newegg
Batteries:
http://www.powergears.com/product.php?catID=1100&p=1
http://www.computergiants.com/items/one_item.asp?part=71148&cat=99&subsubcat=115 2
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M93 37G/A
http://eshop.macsales.com/item/Newer%20Technology/BAPIB111V36/
http://eshop.macsales.com/item/Newer%20Technology/BAPIB111V48/
Adapters:
I have found the following options for replacing a white iBook power adapter:
http://www.macresq.com/store/detail.php?prodID=P009141
MCE Technologies
http://www.madsonline.com/index.html?
adapter at Other World Computing
Apple's is the only one with the glowing ring, though, and is found here:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M89 43LL/A
Enough dual USB G3 iBooks suffered from a logic board problem that Apple began the iBook Logic Board Repair Extension Program in January of 2004. Check out the FAQ page and be aware of how this logic board problem manifests itself.
It has been suggested that you can minimize the chance of a logic board failure of this sort by never picking it up by the front left corner alone. Pick it up with both hands or in the center under the trackpad.
It's also a good idea not to close it any more often than you need to in order to minimize the chance of the backlight cable (and other cables and wires) becoming pinched in the hinge or broken. When you have some time, check out the Discussion thread in the Displays Forum entitled 90 degrees and black out!!!!
Information on using the battery to maximize both life and lifespan can be found here.
You can download the manual for the iBook (Dual USB) from this page:
http://www.apple.com/support/manuals/ibook/
Good luck, and happy iBooking!

Create Workspace(Library) in domain by OCS Web Service API

Hi,
I am currently using the OCS Web Service API to create a Workspace(Library) in domain level. Here is the code I used:
 DomainManager dm = wsCon.getDomainManager();
 WorkspaceManager wm = wsCon.getWorkspaceManager();
 Item domainItem = dm.getDefaultDomain(null);
 long domainID = domainItem.getId();
 wm.createWorkspace( domainID,
 null,
 new NamedValue[]{
 new NamedValue( Attributes.NAME, "libName"),
 new NamedValue( Attributes.VERSIONING_CONFIGURATION, new NamedValue[]{
 new NamedValue( Attributes.VERSIONING_CONFIGURATION_AUTO_VERSION, new Boolean(true)),
 new NamedValue( Attributes.VERSIONING_CONFIGURATION_AUTO_LABEL, new Boolean(true)),
 new NamedValue( Attributes.VERSIONING_CONFIGURATION_LABEL_TYPE, new Integer(FdkConstants.VERSION_LABELING_DECIMAL)),
 null
However, following exception is caught:
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: ORACLE.FDK.WorkflowError:ORACLE.FDK.WorkflowParameterPromptRequired
faultActor:
faultNode:
faultDetail:
 {http://xmlns.oracle.com/content/ws}fault:<detailedErrorCode xsi:type="xsd:string">ORACLE.FDK.WorkflowParameterPromptRequired</detailedErrorCode><errorCode xsi:type="xsd:string">ORACLE.FDK.WorkflowError</errorCode><exceptionEntries xsi:type="ns1:ArrayOfFdkExceptionEntry" xsi:nil="true"/><info soapenc:arrayType="ns1:NamedValue[1]" xsi:type="soapenc:Array" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"><info xsi:type="ns1:NamedValue"><name xsi:type="xsd:string">ECM.EXCEPTIONINFO.ObjectId</name><value xsi:type="soapenc:long">38465</value></info></info><serverStackTraceId xsi:type="xsd:string"/>
 {http://xml.apache.org/axis/}hostname:pccw-nkvcsp4lrh
ORACLE.FDK.WorkflowError:ORACLE.FDK.WorkflowParameterPromptRequired
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
 at java.lang.Class.newInstance0(Class.java:308)
 at java.lang.Class.newInstance(Class.java:261)
 at org.apache.axis.encoding.ser.BeanDeserializer.<init>(BeanDeserializer.java:104)
 at org.apache.axis.encoding.ser.BeanDeserializer.<init>(BeanDeserializer.java:90)
 at oracle.ifs.fdk.FdkException.getDeserializer(FdkException.java:270)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at org.apache.axis.encoding.ser.BaseDeserializerFactory.getSpecialized(BaseDeserializerFactory.java:154)
 at org.apache.axis.encoding.ser.BaseDeserializerFactory.getDeserializerAs(BaseDeserializerFactory.java:84)
 at org.apache.axis.encoding.DeserializationContext.getDeserializer(DeserializationContext.java:464)
 at org.apache.axis.encoding.DeserializationContext.getDeserializerForType(DeserializationContext.java:547)
 at org.apache.axis.message.SOAPFaultDetailsBuilder.onStartChild(SOAPFaultDetailsBuilder.java:157)
 at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java:1035)
 at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1227)
 at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:314)
 at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
 at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:196)
 at oracle.xml.jaxp.JXSAXParser.parse(JXSAXParser.java:288)
 at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
 at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
 at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
 at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:784)
 at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:143)
 at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
 at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
 at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
 at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
 at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
 at org.apache.axis.client.Call.invoke(Call.java:2748)
 at org.apache.axis.client.Call.invoke(Call.java:2424)
 at org.apache.axis.client.Call.invoke(Call.java:2347)
 at org.apache.axis.client.Call.invoke(Call.java:1804)
 at oracle.ifs.fdk.WorkspaceManagerSoapBindingStub.createWorkspace(WorkspaceManagerSoapBindingStub.java:367)
It seems that the workflow parameters are required to set, but I haven't create any workflow on my DB. Any idea on how to solve this problem?
Thanks and regards,
Tammy

Post Author: yura.tkachenko
CA Forum: Nsite
Hi, saxotechpm
saxotechpm:
Is there support for inserting an object that has lookup relationships to other objects:
Using the WSAPI I have tried to insert an object that has a lookup relationship to another object for pulling a number of fields.
The insert works if I set the appropriate object id for the linker eo on the lookup button field, however none of the data fields from the linked eo are drawn into the object.
I have also tried running an update with the following syntax. The update works on non linked fields but the linked object data elements are never updated.
The following NEOQLsyntax is used:
update eo_60700 set button_select_contact=721238,button_select_account=721237 where Id=731033;
721238 = an instance of a contact object
721237 = an instance of an account object
731033 = the target instance object being updated - the expectation is that this object would get the data elements linked from the two other instances.
Thanks
Yes, we do support of linked Enterprise Objects in WSAPI for detail sections and for header fields. But due to some internal issues headers are not work properly. But now everything is OK. It has been fixed and it will take some time while you will be able to use it on production. But this fix will be delivered in the nearest patch. So in the October you can use this feature already on production.
Thanks for your request and sorry for any inconveniece.

Get started with web service API

Similar Messages

Maybe you are looking for