Get the current line no.(similar to sy-linno in report) in Sapscript form

Hi everyone,
In ABAP reporting, you can use sy-linno to determine the current line no.
But if in sapscript form,
does any system field to get the currect line no. or y-origin. ?
Just say the program is now runing and have written several lines in a window of the form.
AS         This is the first line
AS         This is the second line
AS         This is the third line
how to get the current line = 3 or yorigin '+3' LN?
Thanks for reply in advance.

Hi,
you can also chk the sy-linno directly in your script.
Regards
Subramanian

Similar Messages

Get the index of the current line in use

Dear All,
Well how can i get the index of the current line in use?
this the code I am using :
Dim i As Integer
Set oBatchForm = SBO_Application.Forms.GetForm(Form_Id, 1)
Set oMainMatrix = oBatchForm.Items.Item(Matrix_Id).Specific
For i = 1 To oMainMatrix.VisualRowCount
    If oMainMatrix.IsRowSelected(i) = True Then
       GB_SelRow = i
        Exit For
    End If
Next
Exit Sub
This code is not working when there is a line in the document type texte.
please advice.

Hi Mary,
this is code in C#.NET which is working fine, try to do same in your code:
for(int irow=1; irow<=oMatrix.RowCount; irow++)
     if(oMatrix.IsRowSelected(irow))
     SelectRow = irow;
                break;
Hope it helps.

How to find dynamically the current line number in the source file

Is there a mechanism like __LINE__ and __FILE__ macro in C to get dynamically
the current line number and file name of a source file?

Don't know - but others have asked too. Have you searched the forum? For example:
http://forum.java.sun.com/thread.jsp?forum=31&thread=210496

How to get the current schema name

Hi,
Can anybody please tell me how to get the current schema name, there is some inbuilt function for this,but i am not getting that. Please help me.
Thanks
Jogesh

ok folks, I found the answer at Tom's as usual.
http://asktom.oracle.com/tkyte/who_called_me/index.html
I rewrote it into a function for kicks. just pass the results of DBMS_UTILITY.FORMAT_CALL_STACK to this function and you will get back the owner of the code making the call as well some extra goodies like the name of the code and the type of code depending on the parameter. This ignores the AUTHID CURRENT_USER issues which muddles the schemaid. Quick question, does the average user always have access to DBMS_UTILITY.FORMAT_CALL_STACK or does this get locked down on some systems?
cheers,
paul
create or replace
FUNCTION SELF_EXAM (
   p_call_stack VARCHAR2,
   p_type VARCHAR2 DEFAULT 'SCHEMA'
) RETURN VARCHAR2
AS
   str_stack   VARCHAR2(4000);
   int_n       PLS_INTEGER;
   str_line    VARCHAR2(255);
   found_stack BOOLEAN DEFAULT FALSE;
   int_cnt     PLS_INTEGER := 0;
   str_caller VARCHAR2(30);
   str_name    VARCHAR2(30);
   str_owner   VARCHAR2(30);
   str_type    VARCHAR2(30);
BEGIN
   str_stack := p_call_stack;
   -- Loop through each line of the call stack
   LOOP
     int_n := INSTR( str_stack, chr(10) );
     EXIT WHEN int_cnt = 3 OR int_n IS NULL OR int_n = 0;
     -- get the line
     str_line := SUBSTR( str_stack, 1, int_n - 1 );
     -- remove the line from the stack str
     str_stack := substr( str_stack, int_n + 1 );
     IF NOT found_stack
     THEN
        IF str_line like '%handle%number%name%'
        THEN
           found_stack := TRUE;
        END IF;
     ELSE
        int_cnt := int_cnt + 1;
         -- cnt = 1 is ME
         -- cnt = 2 is MY Caller
         -- cnt = 3 is Their Caller
         IF int_cnt = 1
         THEN
            str_line := SUBSTR( str_line, 22 );
            dbms_output.put_line('->' || str_line);
            IF str_line LIKE 'pr%'
            THEN
               int_n := LENGTH('procedure ');
            ELSIF str_line LIKE 'fun%'
            THEN
               int_n := LENGTH('function ');
            ELSIF str_line LIKE 'package body%'
            THEN
               int_n := LENGTH('package body ');
            ELSIF str_line LIKE 'pack%'
            THEN
               int_n := LENGTH('package ');
            ELSIF str_line LIKE 'anonymous%'
            THEN
               int_n := LENGTH('anonymous block ');
            ELSE
               int_n := null;
            END IF;
            IF int_n IS NOT NULL
            THEN
               str_type := LTRIM(RTRIM(UPPER(SUBSTR( str_line, 1, int_n - 1 ))));
             ELSE
               str_type := 'TRIGGER';
             END IF;
             str_line := SUBSTR( str_line, NVL(int_n,1) );
             int_n     := INSTR( str_line, '.' );
             str_owner := LTRIM(RTRIM(SUBSTR( str_line, 1, int_n - 1 )));
             str_name := LTRIM(RTRIM(SUBSTR( str_line, int_n + 1 )));
          END IF;
       END IF;
   END LOOP;
   IF UPPER(p_type) = 'NAME'
   THEN
      RETURN str_name;
   ELSIF UPPER(p_type) = 'SCHEMA.NAME'
   OR    UPPER(p_type) = 'OWNER.NAME'
   THEN
      RETURN str_owner || '.' || str_name;
   ELSIF UPPER(p_type) = 'TYPE'
   THEN
      RETURN str_type;
   ELSE
      RETURN str_owner;
   END IF;
END SELF_EXAM;

How to get the current tree element (node/childnode/childnode/...) ?

Hello!
I'm trying to create a kind of a navigation tree for my application.
It should represent some elements of an XML structure and some other nodes for other options.
The binding with the context is not a problem, I can create the tree up to all the levels I want to.
The problem now is, that I don't know, how to get the "current tree element", when there is any action.
For example:
public void onActionSelect(...) {
String test = wdContext.currentTreeNodeElement().getText();
wdThis.wdGetContext().currentContextElement().setSelectedElement(test);
With this method I can get the text of the "first level nodes". If I want to get the "second level node", I can do
String test = wdContext.currentTreeNodeElement().currentChildElement.getText();
..and for the next levels so on.
Isn't there any general method to get the information of the selected element without knowing before, whether it is a nodeElement or a nodeElement.currentChildElement or a nodeElement.currentChildElement.currentChildElement, ...?
Greetings,
Ramó

Hi,
if you following that pdf ,
i think your not implemented the below code in DomodifyView method
if (firstTime) {
      IWDTreeNodeType treeNode = (IWDTreeNodeType) view.getElement("TheNode");
      /* The following line is necessary to create parameter mapping from parameter "path" to parameter "selectedElement".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onAction event. Parameter "selectedElement" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onAction. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
      treeNode.mappingOfOnAction().addSourceMapping("path", "selectedElement");
      /* The following line is necessary to create parameter mapping from parameter "path" to parameter "element".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onLoadChildren event. Parameter "element" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onLoadChildren. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
      treeNode.mappingOfOnLoadChildren().addSourceMapping("path", "element");
please cross check once.
Thanks,
Ramesh

How to get the current function name in java

How to get the current function name in java.
In c it is done as
printf("%s",__func__);
Thanx in advance.

j0o wrote:
System.out.println("Class Name: " + new Exception().getStackTrace()[0].getClassName() +
"/n Method Name : " + new Exception().getStackTrace()[0].getMethodName() +
"/n Line number : " + new Exception().getStackTrace()[0].getLineNumber());
I pointed the OP at this approach yesterday in one of his multi-posts. I still have not been given my Dukes!

Get the Current Quarter and Current Week from date

Hi,
I want to get the Current quarter and Current week from a given date, which function modules should i use?
I tried using function module - 'HR_99S_GET_QUARTER' for getting the quarter but it is throwing an error while loading data. Moreover it doesnt exist in BI7.
Similarly for current week.
Please help. Sample code snippets would be appreciated.
Thanks
Jaya

You can use FORM time_conversion wich is the one used by standard in Update Rules:
You can select whether convert 0CALDAY to 0CALWEEK or whatever infobject formats you prefer...
perform time_conversion
            using '0CALDAY'
                   '0CALMONTH'
                    p_input_date
                    l_fscvtval
            changing RESULT
                     c_t_idocstate
                     c_subrc
                     c_abort.
if c_subrc <> 0 or c_abort <> 0.
    exit.
endif.
form time_conversion
               using i_timnm_from type rsiobjnm
                     i_timnm_to   type rsiobjnm
                     i_timvl
                     i_fiscvarnt type t009b-periv
               changing e_timvl
                        c_t_idocstate type rsarr_t_idocstate
                        c_subrc   like sy-subrc
                        c_abort   like sy-subrc. "#EC *
data: l_timvl type rsd_chavl,
      l_result type rsd_chavl.
IF i_timvl CO ' 0'.
    CLEAR e_timvl.
    EXIT.
ENDIF.
l_timvl = i_timvl.
CALL FUNCTION 'RST_TOBJ_TO_DERIVED_TOBJ'
    EXPORTING
      i_timnm_from             = i_timnm_from
      i_timnm_to               = i_timnm_to
      i_timvl                  = l_timvl
      I_FISCVARNT              = i_fiscvarnt
      I_BUFFER                 = rs_c_true
    IMPORTING
      E_TIMVL                  = l_result
    EXCEPTIONS
      INCOMPATIBLE_TOBJS       = 1
      NO_INPUT_VALUE           = 2
      FISCVARNT_MISSING        = 3
      INPUT_NOT_NUMERIC        = 4
      WRONG_DATE               = 5
      WRONG_FISCPER            = 6
      X_MESSAGE                = 7
      OTHERS                   = 8
e_timvl = l_result.
ENDFORM.                  "TIME_CONVERSION

Can the current line be highlighted using a background color or have the cursor flash?

I use the split screen and left click in the Design pane to jump to where I want to be in the Code pane in Dreamweaver CS6. The problem is that it can be very hard to tell where the cursor is in the Code pane since the cursor doesn't flash.
Is there a way to force Dreamweaver CS6 to change the background color of the currently selected line or at least have the cursor flash in both panes? There must be some way to make it easier to find the current line of code.
Thanks.

John Waller wrote:
The cursor does not flash in Code View only when Code View is not in focus i.e. you're working in the Design View window in Split View.
In those caases, I just highlight a word or two in Design View and the corresponding words are highlighted by DW in Code View (even when Code view is not in focus).
Thanks. I've been doing that, but sometimes there is no text to highlight. I hoped Dreamweaver might have a hidden setting that I could enable. That's a lot of extra sliding of the hand/wrist for no good reason when it would be easy for the Dreamweaver programmers to change the background color of the current line or make the cursor flash or do something else to indicate where you are in the code besides making the user constantly make a smearing action with the mouse. All of those extra movements add up the wear and tear when you're trying to avoid getting a repetitive stress injury, especially if you already use mouse gestures in a browser.

How to get the current location text in JTextPane

hi
i want to get the current location text in JTextPane ...iam useing
caretPos = jtpMain.getCaretPosition();
iam geting the current Locations at the same time i want to read the entery current line
i used like this
StartPos=jtpMain.getText();
but iam geting entry data in JTextPane ... how can get current Locatin data ...
pls help me

If I understood your request, what you would like to do is to be able to retrieve Start and End Positions of a given line (a line and NOT the whole content of the JTextPane).
JTextPane is a graphical component that is bound to a logical document. Documents are structured in elements. What defines an element is up to you to decide if you extend your own document but elements are by default paragraphs (runs of text ended by a carriage return '\n' character). So, I think that what you want to do is to retrieve the Start and End positions of the
paragraph over which the caret is currently positionned. Then I think you have got to do the following :
int intStartPos;
int intEndPos;
int intCaretPos;
javax.swing.text.StyledDocument docStyledDoc;
javax.wing.text.Element eleParagraph;
intCaretPos = jtpMain.getCaretPosition( );
//Get a reference to the default styled document bound to the JTextPane component
docStyledDoc = jtpMain.getStyledDocument( );
//Get the paragraph element from the document over which the caret is positionned
eleParagraph = docStyledDoc.getParagraphElement(intCaretPos);
//Get paragraph's offsets
intStartPos = eleParagraph.getStartOffset( );
intEndPos = eleParagraph.getEndOffset( );
hi
i want to get the current location text in JTextPane
...iam useing
caretPos = jtpMain.getCaretPosition();
iam geting the current Locations at the same time i
want to read the entery current line
i used like this
StartPos=jtpMain.getText();
but iam geting entry data in JTextPane ... how can
get current Locatin data ...
pls help me

Can't get the current bitrate info use SMPTE-TT Plugin

Using OSMF2.0 to stream a smil title.
Add the MediaPlayerCapabilityChangeEvent.IS_DYNAMIC_STREAM_CHANGE event listener, after the event dispatch then add the DynamicStreamEvent.SWITCHING_CHANGE event listener.
The bitrate info can be report, normal. But after I add the SMPTE-TT plugin and load it like this:
var pluginResource:MediaResourceBase = new PluginInfoResource(new SMPTETTPluginInfo);mediaFactory.loadPlugin(pluginResource);
The title can be stream correct and the quality of the video can be set by the bandwidth, but only the DynamicStreamEvent.SWITCHING_CHANGE event can not be dispatch, so I can't get the current bitrate info.
I debug it in the OSMF source code and find the issue in the org.osmf.elements.compositeClasses.ParallelDynamicStreamTrait class line 323
FYI:
onSwitchingChange function that the numChildrenSwitching property always 0, so it can not call the setSwitching function and can not dispatch DynamicStreamEvent.SWITCHING_CHANGE event.
So, I add some changes from line 333 to line 336 and it has be fix:
Environment:Flex SDK 4.6 + flash player 11.8.
I don't know it is a bug in the OSMF framework and I want to get more info about it.
Thanks.

can you turn off the message pane (F8) between restarts? I am guessing it will turn on again as well.

Applescript to get the current insertion point of the cursor

How do I use Applescript to get the current insertion point of the cursor in a Apple pages.app document?

Oops, missed that one - you are correct, the line should be:
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">set {TheStart, TheEnd} to character range of the selection</pre>
I have a wrapper script that I use to insert stuff from my handler/code library into a Script Editor document, and was adapting snippets from that for my examples - I guess that one got away.
As for the dictionary, some applications just have poorly written or outdated documentation. Some of the items have multiple entries (eg, there may be a selection object for the application and also for the document), and some inherit properties from other items. Some are used as nouns, others as verbs (or both). Sometimes it is easier to visualize the item by keeping track of it's reference - the 'some property of document 1 of the current application' thing. You can use the Script Editor's Event Log to see the results of various properties and commands - for example, the above script will result in the following entry (your numbers will vary depending on the selected text):
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">tell current application
get character range of selection
{50, 50}
end tell
</pre>
You can also use the 'log' statement (eg, 'log MyVariable') to add your own entries into the log instead of using dialog boxes.

In SQL Loader based Concurrent Program, how to get the current request id

Hi All,
I am trying the following control file.
OPTIONS ( SKIP = 1 , ERRORS = 0 )
LOAD DATA
INFILE *
REPLACE INTO TABLE XXPA_ASSET_TRANS_INTERFACE
FIELDS TERMINATED by ',' OPTIONALLY ENCLOSED BY'"'
TRAILING NULLCOLS
     Project_Number
     ,Asset_Name
     ,Location_Country Constant USA
     ,request_id CHAR "fnd_global.conc_request_id"
in request id column I am getting -1 ...
Please lt me know how can i get the current request id in the request_id field.
Thanks

Hi
To my knowledge, this can't be achieved with SQL*Loader concurrent programs. Depending on what You are using the request id, the options provided may be useful.
I had a similar issue, requiring the use of user_id and login_id for who columns, and the solution applied was:
- Define a template for the control file, with place holders for the additional info:
user_id constant "x_user_id"
- Create a shell to receive the additional info as parameters, and use sed to change the template file to generate the control file, using the parameter to replace placeholders.
Create a request set to launch the shell concurrent program and then the sql loader program, whose control file now has the additional information required.
Caution when more than one middle tier node is used.

EXIT_SAPLEBNF_005 (ZXM06U51) - getting the current purchase order details

I have a requirement to determine release agent in part based on who owns the budget. That's easy. The hard part is getting the current data (at least so far)...
I have tried using the MEPO_DOC_* function moduless. They didn't even give me the amount (at least not in all situations).
I have now tried using the class based interface (IF_PURCHASE_ORDER_MM) - which seems OK at first but has an unwanted side effect: it interferes heavily with the purchase order transaction.
Currently I am struggling to get rid of the side effects, but there must be an easier way than the path I have started on. I've been looking for some sort of manager class which could be used to retrieve the interface reference without having to initialize it myself via CL_PO_HEADER_HANDLE_MM but haven't found one yet.
Part of my problem is that the user exit is called twice, so if I buffer the handle transaction ME22N doesn't initialize correctly (initially appears in display mode becuase the first call for some reason is stating that it's transaction ME23N in change mode). If I don't buffer the handle, the switch to change mode doesn't work properly in ME23N. Thank you SAP!
I've been struggling with this for more than a day now, so it's time to ask the experts to see if anyone can help me get out of this [Catch 22|http://en.wikipedia.org/wiki/Catch-22_%28logic%29|Catch 22 explanation in Wikipedia]-like situation
FORM po_get_interface_handle
     USING value(pe_purchase_order) TYPE ekko-ebeln
     CHANGING po_purchase_order TYPE REF TO if_purchase_order_mm.
* 2011-04-19 EX_KKILHAVN (Kjetil Kilhavn, Blue Consulting)
* Buffer handles to avoid problems with multiple initializations
TYPES: BEGIN OF buffer_po_handle,
           ebeln     TYPE ekko-ebeln,
           po_handle TYPE REF TO cl_po_header_handle_mm,
         END OF buffer_po_handle.
STATICS: lt_po_handles_buffer TYPE SORTED TABLE OF buffer_po_handle
                                  WITH UNIQUE KEY ebeln.
DATA: ls_po_handle         LIKE LINE OF lt_po_handles_buffer[],
        le_transaction_type TYPE t160-trtyp,
        le_activity_category TYPE char01,
        le_transaction_code TYPE syst-tcode,
        ls_document          TYPE mepo_document,
        le_result            TYPE mmpur_bool.
READ TABLE lt_po_handles_buffer[]
       WITH TABLE KEY ebeln = pe_purchase_order
       INTO ls_po_handle.
IF sy-subrc <> 0.
    ls_po_handle-ebeln = pe_purchase_order.
    CREATE OBJECT ls_po_handle-po_handle
      EXPORTING
        im_po_number = pe_purchase_order
      EXCEPTIONS
        failure      = 1.
    IF sy-subrc               = 0           AND
       ls_po_handle-po_handle IS NOT INITIAL.
      "Check transaction type must handle code being invoked from change transactions
      "and from other transactions (e.g. Business Workflow agent determination)
      CALL METHOD ls_po_handle-po_handle->get_transaction_state
        IMPORTING
          ex_trtyp = le_transaction_type
          ex_aktyp = le_activity_category
          ex_tcode = le_transaction_code.
      IF le_transaction_type IS INITIAL.
        le_transaction_type = 'A'.
      ENDIF.
      IF le_transaction_code IS INITIAL.
        le_transaction_code = 'ME23N'.
      ENDIF.
      ls_po_handle-po_handle->set_state( im_state = cl_po_header_handle_mm=>c_available ).
      MOVE: mmpur_po_process    TO ls_document-process,
           le_transaction_type TO ls_document-trtyp,
           pe_purchase_order    TO ls_document-doc_key(10),
           mmpur_initiator_call TO ls_document-initiator-initiator.
      ls_po_handle-po_handle->po_initialize( im_document = ls_document ).
      CALL METHOD ls_po_handle-po_handle->po_read
        EXPORTING
          im_tcode     = le_transaction_code
          im_trtyp     = ls_document-trtyp
          im_aktyp     = le_activity_category "ls_document-trtyp
          im_po_number = pe_purchase_order
          im_document = ls_document
        IMPORTING
          ex_result    = le_result.
      IF le_result = mmpur_yes.
        READ TABLE lt_po_handles_buffer[]
             WITH TABLE KEY ebeln = ls_po_handle-ebeln
             TRANSPORTING NO FIELDS.
        INSERT ls_po_handle INTO lt_po_handles_buffer[] INDEX sy-tabix.
      ENDIF.
    ENDIF.
ENDIF.
TRY.
      po_purchase_order = ls_po_handle-po_handle.
    CATCH cx_sy_move_cast_error.
ENDTRY.
ENDFORM.                    "po_get_interface_handle

Hi ravi,
can you please tell me the Tcode for creation of purchaze order in SRM.
thank you
sunny.

How to get the current filename and & or path

How can I get the current path or filename?
I didn't really find any answers in the net. this.path or app.path were suggested but I couldn't get it to work.
Thanks in advance for your answer!
Livecycle Designer ES 8.2.1.3144.1.471865

Hi,
event.target.path.toString(); will give the full path including the filename.
event.target.documentFileName.toString(); will give the filename only.
Good luck,
Niall

How to get the current path of my application in java ?

how to get the current path of my application in java ?
thanks

To get the path where your application has been installed you have to do the following:
have a class called "what_ever" in the folder.
then you do a litte:
String path=
what_ever.class.getRessource("what_ever.class").toString()
That get you a string like:
file:/C:/Program Files/Cool_program/what_ever.class
Then you process the result a little to remove anything you don't want:
path=path.substring(path.indexOf('/')+1),path.lastIndexOf('/'))
//Might be a little error here but you should find out //quickly if it's the case
And here you go, you have a nice
C:/Program Files/Cool_program
which is the path to your application.
Hooray

Get the current line no.(similar to sy-linno in report) in Sapscript form

Similar Messages

Maybe you are looking for