Get the pid of current user...

well.. I feel like a newbie :D
how could I found wich is my process id when I log on into Oracle db? (11g)

you can run the following:
select
   pid,spid
from
   v$process
where
   ADDR=(select paddr from v$session where SID=(select sid from v$session where audsid=sys_context('userenv','SESSIONID')));Regards.
Edited by: user11150436 on Nov 17, 2010 2:02 PM
you might also use:
select
   pid,spid
from
   v$process
where
   ADDR=(select paddr from v$session where SID in (select sid from v$session where audsid=sys_context('userenv','SESSIONID')));if you get an error as:
ERROR at line 1:
ORA-01427: single-row subquery returns more than one rowEdited by: user11150436 on Nov 17, 2010 2:07 PM

Similar Messages

  • Getting the id of current user CE 7.2

    hi experts,
    in my wd application i need to fetch the id of current user , i have added two dc's as dependenies
    1. tc/je/security/api
    2.tc/aii/base/offline/facade
    i tried using th following code
    IWDClientUser clientUser = WDClientUser.getLoggedInClientUser();
    IUser user = clientUser.getSAPUser();
    String emailId = user.getEmail();
    it gave me syntax error as it is not recognizing the "IUSER".
    Please help me in this regard.
    thanks,
    vishavdeep singh lohan

    Hi,
    Try this code:
    IWDClientUser wdcu = WDClientUser.getCurrentUser();
    StringTokenizer stkUserName = new StringTokenizer(wdcu.getClientUserID(),":");
    while (stkUserName.hasMoreElements())
         strUserID = stkUserName.nextToken();               
    Regards,
    Poojith MV

  • How can i get the list of all users present in the UME ?

    Hi Experts,
    How can i get the list of all users present in the UME ?
    Is there any API or function Code to get all user list??
    Please help me out!!!
    Help will be rewarded
    -pankaj chouhan

    Hi Pankaj,
    find the official NetWeaver security javadocs (including access to UME) <a href="http://help.sap.com/javadocs/NW04S/current/se/index.html">here</a>. Look for classs UMFactory and proceed from there.
    Best regards,
    Martin

  • How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

    How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

    Ok what about If i need to get all important attributes by comparing Email addresses from excel file and get all required answers
    currently I am trying to verify how many users Lines are missing , Emp numbers , Phones  from AD with HR list available to me.
    I am trying to Scan all the AD matching HR Excel sheet and want to search quickly how many accounts are active , Line Managers names , Phone numbers , locations , title , AD ID .
    these are fields I am interested to get in output file after scanning Excel file and geting reply from AD in another Excel or CSV file
    Name’tAccountName’tDescri ption’tEma I IAddress’tLastLogonoate’tManager’tTitle’tDepartmenttComp
    any’twhenCreatedtAcctEnabled’tGroups
    Name,SamAccountName,Description,EmailAddress,LastLogonDate,Manager,Title,Department,Company,whenCreated,Enabled,MemberOf | Sort-Object -Property Name
    Can you modify this script to help me out :)
    Hi,
    Depending on what attributes you want.
    Import-Module ActiveDirectory
    #From a txt file
    $USERS = Get-Content C:\Temp\USER-LIST.txt
    $USERS|Foreach{Get-ADUser $_ -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
    #or from a csv file
    $USERS = Import-CSV C:\Temp\USER-LIST.csv
    $USERS|Foreach{Get-ADUser $_.SAMAccountName -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
    Regards,
    Dear
    Gautam Ji<abbr class="affil"></abbr>
    Thanks for replying I tried both but it did not work for me instead this command which i extended generated nice results
    Get-ADUser -Filter * -Property * | Select-Object Name,Created,createTimeStamp,DistinguishedName,DisplayName,
    EmployeeID,EmployeeNumber,Enabled,HomeDirectory,LastBadPasswordAttempt,LastLogonDate,LogonWorkstations,City,Manager,MemberOf,MobilePhone,PasswordLastSet,BadLogonCount,pwdLastSet,SamAccountName,UserPrincipalName,whenCreated,whenChanged
    | Export-CSV Allusers.csv -NoTypeInformation -Encoding UTF8
    only one problem is that Manager column is generating this outcome rather showing exact name of the line Manager .
    CN=Mr XYZ ,OU=Users,OU=IT,OU=Departments,OU=Company ,DC=organization,DC=com,DC=tk

  • How to get the Asset's current step under a specific workflow process via API?

    Everyone,
    Is there a way to get the asset's current step for a specific workflow process by the WebCenter Sites API? We are showing out the asset created within the WebCenter Sites in another application via its API. We would like some actions get to be done once determined assets went into a specific step of a workflow process. Any suggestions are welcomed.
    Regards!

    Here is some information from the FDK Programmer's guide page 115:
    IMPORTANT: A valid text range can span multiple paragraphs, subcolumns, or text frames.
    It cant span multiple flows, footnotes, table cells, or text lines.
    It is possible for a document to have no text selection or insertion point at all. This can occur in
    the following circumstances:
    ● One or more graphic objects in the document are selected
    ● One or more entire table cells in the document are selected
    ● There is no selection of any type in the document
    So, I did select one or more entire table cells in the document in my first test. It's logical that the result was not like expected.
    But selecting one or more entire table cells is a crucial requirement for my plugin, is there anyway to get things straight?
    Simply put, I want to enable users to select one or more table cells in the document, and I want to get the object handles of the first cell and the last cell through Framemaker API calls. How?
    Many thanks in advance!
    Best Regards,
    Ellen N. Zhao

  • How to get the activity of a user?

    Hi Experts,
    How can we get the activity of a user i.e. Which transaction a particular user has gone or some activity log on a particular date? Any table, FM or Tcode. I have already checked the STAD and SM20 transactions. Some authorization problem. So anything except these Tcodes would be helpful. Thanks in advance.
    Regards,
    Prashant.

    >
    santhosh kumar wrote:
    > Hi,
    >
    > I guess if it is not updated or traced under STAD means, i.e. related to authorization failures etc.. kind of stuff will be saved at runtime only in the SAP memory.
    >
    > As it is stored in the buffer, can not be traced in any of the transaction.
    > You should request the user to save and send the screen shot of the SU53 of the user whenever he gets some authorization issue.
    >
    > Based on that, by looking into the SUIM transaction, it can be known whether he is authorized or not, which roles have been assigned etc.. kind of details.
    >
    > Regards,
    > Santhosh.
    Hi Santosh,
    Actually I am doing a root cause analysis for which I need to know whether a particular user has used a particular TCode. I guess the STAD will display only the current data, is there a TCode to display historical data related to user accessing a particular data. Note: I don't have basis authorization.
    Regards,
    Prashant

  • How to get the list of IDM users in a workflow.

    Hi,
    I wanted to get the list of IDM users in a workflow into a list.Now I tried to use getObjects Method,I do not have the display session here,I passed the workflow context or WF_Context.But it is giving exception like context null .
    I used the same method in a form and it worked.How can I get the list of users in a workflow.It is for customizing reports.
    Thanks and Regards,
    Pandu
    Any Idea on how to customize reports including attributes from resources and auditing attributes etc.Any help would be really great.
    Thank you.

    Hi John,
    I get this exception WorkItemForm: no id.
    This comes when I click on the other column.I generate the data needed in a report and display it as a sorting table when I get the data.
    I want to give the user ability to sort data by different columns.But when I click any column I get the exception
    WorkItemForm: no id
    How can I save a workitem on a manual form before invoking it from a manual action.
    Here is the code snippet
    <Field name='tblUsers'>
            <Display class='SortingTable'>
              <Property name='selectEnable' value='false'/>
              <Property name='align' value='left'/>
              <Property name='linkEnable' value='false'/>
              <Property name='sortEnable' value='true'/>
              <Property name='width' value='400'/>
              <Property name='columns'>
                <List>
                  <String>Account id</String>
                  <String>First Name</String>                      
                </List>
              </Property>
            </Display>      
            <FieldLoop for='row' in='_searchList[*]'>
              <Field name='enduserId'>
                <Display class='Label'>
                  <Property name='value'>
                    <block trace='true'>
                      <invoke name='getAccountId'>
                        <ref>row</ref>
                      </invoke>
                    </block>
                  </Property>
                </Display>
              </Field>
              <Field name='lblfirstname'>
                <Display class='Label'>
                  <Property name='value'>
                    <invoke name='getAttribute'>
                      <ref>row</ref>
                      <s>firstname</s>
                    </invoke>
                  </Property>
                </Display>
              </Field>
         <FieldLoop>      I think I may need to save some workItem,That is why this may be giving the error.How can I correct this.
    Thanks,
    pandu

  • How to get the number of current active external modes?

    hi all,
    I need to get the number of currently active external modes. This can be done by calling function THUSRINFO. But this only works propperly, if you are logged on only once. If you are logged on more than one time then the function returns several entries in the parameter USR_TABLE. The entries mainly differ in the first parameter TID (type UTID, INT4) "terminal-identification" but how can I know which is the valid one for my current session. Functions TERMINAL_ID_GET, SPH_TERMINAL_IDENTIFY and SPH_TERMINAL_ID_GET dont work.
    Or is there another way to get the number of active external sessions?
    Thanks in advance,
    Michael

    Hi,
    tables: usr02, usr41.
    data: OPCODE_MODE_COUNT(1) TYPE X VALUE 3,
          modes like sy-index,
          u_MODES LIKE MODES.
    select * from usr02.
      select * from usr41 where BNAME = usr02-bname.
        CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE_MODE_COUNT
          ID 'TID' FIELD usr41-TERMID
          ID 'MODES' FIELD MODES.
        IF SY-SUBRC = 0.
          u_MODES = u_MODES + MODES.
        ENDIF.
      endselect.
      if sy-subrc = 0.
        write:/ usr02-bname, u_MODES.
      endif.
      clear u_modes.
    endselect.

  • How to get the list of actie users in the moss website !!

    Hello Everybody,
    I need to get the list of active users with access in the moss websites like following format.
    User name         User mailid       permission
    one of the project manager requested to find list of active users with user accesses in the moss website.
    he wants to modify the user permissions.
    Kindly suggest me how to get the users with permissions.
    Thanks.

    Hi,
    I have developed that code to retrieve the users, groups and permissions
    if (orole.Member.PrincipalType.ToString() == "SharePointGroup")
    lvigroup = new ListViewItem();
    lvigroup.Text = orole.Member.LoginName;
    // args.GroupsList.Items.Add(lvigroup);
    DoUpdate1(lvigroup);
    Group group = clientContext.Web.SiteGroups.GetById(orole.Member.Id);
    UserCollection collUser = group.Users;
    clientContext.Load(collUser);
    clientContext.ExecuteQuery();
    foreach (User oUser in collUser)
    lvigroup = new ListViewItem();
    lvigroup.Text = "";
    lvsigroup = new ListViewItem.ListViewSubItem();
    lvsigroup.Text = oUser.LoginName;
    lvigroup.SubItems.Add(lvsigroup);
    //args.GroupsList.Items.Add(lvigroup);
    DoUpdate1(lvigroup);
    // MessageBox.Show(oUser.LoginName);
    RoleDefinitionBindingCollection roleDefsbindings = null;
    roleDefsbindings = orole.RoleDefinitionBindings;
    clientContext.Load(roleDefsbindings);
    clientContext.ExecuteQuery();
    //permission level
    lvsi = new ListViewItem.ListViewSubItem();
    string permissionsstr = string.Empty;
    for (int i = 0; i < roleDefsbindings.Count; i++)
    if (i == roleDefsbindings.Count - 1)
    permissionsstr = permissionsstr += roleDefsbindings[i].Name;
    else
    permissionsstr = permissionsstr += roleDefsbindings[i].Name + ", ";
    Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

  • How can i get the list of all users present in the LDAP

    Hi Experts,
    How can i get the list of all users present in the LDAP ?
    Is there any API or function Code to get all user list??
    Please help me out!!!
    Help will be rewarded

    Well it will depend on exactly where your UME configuration points to in the LDAP tree but yes, it is possible to get all users.  Something like the following should do it:
    import com.sap.security.api.*;
    import com.sapportals.portal.prt.component.*;
    IUserFactory iuf;
    ISearchResult isr;
    IUser user
    String userid;
    iuf = UMFactory.getUserFactory();
    isr = iuf.getUniqueIDs();
    you will need to iterate the ISearchResult object but you can get IUser objects by
    userid = (String)isr.next();
    user = iuf.getUser(userid);
    then you can imanipulate / identify / or whatever you need with the user object
    Haydn

  • How to get the homedirectory of nis users while they login

    HI,
    I am having a solaris nis server and a file server running on solaris (pre installed).I need to add new workstations (linux) to this server, i stopped firewall and selinux on linux pc & configured network.I used authconfig to configure nis client. In the NIS server cd /var/yp/src and edited netgroup & hosts.
    and then used make command. Now If i give su <nisusername> it allows authentication but without home directory.
    Plz tell me which file i need to edit in NIS inorder to get the homedirectory of logged user.
    (might be the hostname of the linux system to be given in any file in NIS server)
    Thank you All

    I found output diffrence to the same command in preconfigured linux client(Redhat 7.3) working well in NIS and the new linux client (RHEL 4.0)
    [user@rhelclient ~]$ ps -ef | grep automount | grep -v grep
    root 2820 1 0 Jun28 ? 00:00:00 /usr/sbin/automount --timeout=60 /projects yp auto.projects -rw,hard,nosuid,noquota,grpid,intr
    root 2833 1 0 Jun28 ? 00:00:00 /usr/sbin/automount --timeout=60 /users yp auto.users -rw,hard,nosuid,noquota,grpid,intr
    root 3038 1 0 Jun28 ? 00:00:00 /usr/sbin/automount --timeout=60 /apps yp auto.apps -rw,hard,nosuid,noquota,grpid,intr
    redhat7.3:/users/sree> ps -ef | grep automount | grep -v grep
    root 1135 1 0 Jun27 ? 00:00:00 /usr/sbin/automount /projects yp
    root 1137 1 0 Jun27 ? 00:00:00 /usr/sbin/automount /users yp au
    root 1139 1 0 Jun27 ? 00:00:00 /usr/sbin/automount /homes yp au
    root 1152 1 0 Jun27 ? 00:00:00 /usr/sbin/automount /eval yp aut
    root 1176 1 0 Jun27 ? 00:00:00 /usr/sbin/automount /apps yp aut
    /homes and /eval directories are missing in RHEL4.0 and also it have a timeout=60.
    Any clues.
    thank you

  • How to get the list of all users

    Hi,
    Is there a way in Grid Control for getting the list of all users on all target databases? I need to count how many Oracle db users in our company.
    Thanks a lot.

    One way to do it might be...
    Assuming you have preferred credentials set up for all of your databases, you could run a 'select username from dba_users or all_users;' against all of your databases through grid control.
    Click on Targets tab, click Databases, then the 'Execute SQL' link at the bottom of the page. Click 'Add' and 'Select All'. Then run it. It's just running the same sql across all of your databases and the output will be at the bottom for all of them.

  • What report is run in SAP to get the DATE on which Users are locked ?

    Hello,
    What report is run in SAP to get the DATE on which Users are locked ?
    I have tried with RSUSR200 ,-- last logon ,last password change , but i did not get a option to find the date on which are Users are locked .
    Can anyone suggest what report should be executed to get the date on which Users are locked and by whom ?
    As a alternate , i  am usig SUIM to get extract this data but i am looking for a report .
    thanks & regards
    Ganesh

    Hi Ganesh,
    You can try the below link where many of the options are described:
    How i can check at what date perticular user was locked and who lock it?
    Regards,
    Nilanjan

  • How to get the footage's current frame number in expression?

    There are 2 layers.One is text layer,one is sequence layer.
    Footage has begun from the 20th frame.
    Therefore, the number of composition's current frame number and footage's frame number has shifted.
    I want to show footage's frame number in text layer . not composition's frame number.
    How to get the footage's current frame number in expression?
    Tatsuya

    >Footage has begun from the 20th frame.
    Do you mean that the footage layer has been trimmed (so that the start of the footage lines up with the start of the comp, but the first 19 frames are not visible), or moved to the left (so that frame 20 lines up with the comp's frame 0), or that the sequence actually begins with the 20th frame (at frame 0 of the comp), or something else?
    Are the frame rates of the comp and the footage the same?
    Dan

  • How can I get the information of current BW system id?

    How can I get the information of current BW system id '0TCTSYSID' or 'LOGSYS'?
    thank your attention!

    Transaction SCC4 will give you the current logical system you are connected to (double click on the current client).
    Regards,
    Fred

Maybe you are looking for