Get the result in Excel File

In my program, I am downloading 3 types of result in 3 diffreent excel sheet.
Is there any way by which we can download these 3 diffreent excel sheet into one excel file in 3 diffrent sheet.....( i.e. the result should be in 3 different sheets in same (single) excel file ?????

It is possible
USE FM : 'EXCEL_OLE_STANDARD_DAT'
Here you can mention diffrent sheet names and file name
Thanks
Seshu

Similar Messages

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents.

Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents and I've run Repair on Microsoft Office.
I don't know what else to try.
Any help would be appreciated. Thanks.

A hotfix request has already been submitted for this issue and we have also documented it here
http://support.microsoft.com/kb/983097
Thanks.
Tony Chen
TechNet Community Support

[LV - TS] How to execute a SEQ file, get the result (PASS/FAIL) and the report file ?

Hello,
I'm looking for the most obvious and simple way to, from Labview :
1- Start the Teststand engine : DONE
2- Get a list of SEQ files to execute : DONE
3- Loop through the list to execute each SEQ file : <- found some examples but I have some trouble with the UIMessage stuff
http://zone.ni.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/executing_sequences_using_api_labview/
4- Get the result of the SEQ execution : <- unsure
5- Get the XML path+name of the report file generated : <- obviously not easy
http://digital.ni.com/public.nsf/allkb/3D3B2358DF9B786B8625789500549A3B
http://forums.ni.com/t5/NI-TestStand/Getting-Report-File-Path-location-at-execution-in-TestStand-2012/td-p/3041789
Here is my current implementation :
David Koch

Hello,
I tried to work from this example :
http://forums.ni.com/t5/NI-TestStand/Execution-of-TestStand-Sequence-in-LabVIEW-via-TS-API-Different/td-p/2939616/page/2#M46686
However it remains unclear about how to get a simple
answer from just running a sequence file out of any
model so far (Simple Pass). Like I told you, all what
I need, once the TS engine is started, is a VI with the
following interface :
INPUT
1- TS engine reference
2- SEQ file path (path or string)
3- Sequence name to execute
4- UUT string (optional, but yeah)
5- error in
OUTPUT
1- Result boolean (PASS/FAIL)
2- Path to XML report
3- error out
It would be so cool to just have this
About the surrounding UI, I'm working on it. The LV
code is not really important at this point, it's running
a SEQ file that matters to me.
David Koch

Export result of ssas query result to excel file

Hi All,
I have browsed a SSAS cube. I want to export result of SSAS cube into excel file.
Kindly give your input.
Thanks,
Vivek singh

Hi,
I do not know whether there is a direct solution but there is an indirect way of doing it. I always follow this method if I ever want to get MDX results into Excel.
1 - Install the DAX Studio (I know you want MDX results, so do not get confused by looking at the word DAX. Continue reading). You can download it from the following location.
http://www.sqlbi.com/tools/dax-studio/
2 - Once you install DAX Studio, Go to the Add-Ins ribbon. Click on DAX Studio.
3 - There is an option "Tabular Server" and there is a drop-down list where you can enter the SSAS (MD CUBE Server) server name. Enter the server name manually. If you have multiple SSAS Databases and if you are interested in a specific SSAS database
enter "Initial Catalog=Your SSAS Database Name" in Additional Options section and Click Connect. You can successfully connect to the SSAS Server now.
Here are the details described so far in pictorial representation.
4 - Enter your MDX manually and execute the code via DAX studio and you will get your results right-away in Excel.
Now, isn't that an elegant way of getting MDX results into Excel :) ? Besides Excel's Pivot Table option, I do not know whether there are any alternate solutions to this but wait for other Pros' comments as well.
Best regards...
Chandima Lakmal Fonseka

Are You All Able to get the Output In EXCEL Format

Hi All,
I have one question. Are You All Able to get the Output In EXCEL Format?? I am working on Oracle Apllication 11.5.10.2 and my XML builder is 5.0.1. Problem which i m facing is this...... Whenever i am submitting a concurrent program with format type different from PDF i could not able to view the ouput in desired format. When i am pressing view output it gives me a file in XML and when i save that file with extention 'xls' or 'rtf' then i could able to see the saved file in desired format.
Can anyone tell me where is the problem??? Is it a bug?
I am using microsoft world 2000 sp-3.
Please give your valuable comments. May be your comments can solve my problem..
Thanks
Ravi

Hi I got Same issue
When I change Format to EXCEL from
Submit request>> Option>> Format = EXCEL
In window I am getting something HTML code and
when I try to copy it to Browser from Tools>> Copy File in to Browser I am getting following message
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
End tag 'p' does not match the start tag 'a'. Error processing resource 'http://our url.com:8000/OA_CGI...
<p class="c0"><a name="Text4" id="Text4"><a name="Text1_1" id="Text1_1"><span class="c1">Dept No <...
But I can see the output when Format is PDF
Pls suggest solution ,I am using EBS 11.5.10.2.
Thanks
Rahul
Message was edited by: Rahul
user576181

HOW CAN I GET THE TIME IN EXCEL SHEET USING WRITE TO MEASUREMENT INSTRUCTION

HI, I am using GET TIME IN SECONDS ,and after that i placed SECONDS TO DATE /TIME instruction ,and i had taken a write to measurement file instruction
to get the time in excel sheet. Now i am not able to connect write to measurement source to seconds to date and time output . Is there any solution.
I am attaching my VI file also.
Attachments:
TEST.vi ‏43 KB

Hi
Im using Labview 8.2. Currently it just shows the data without the time. Im not sure what to do. It works perfectly though. I just want the time to appear on my notepad along with my data
holla
Attachments:
Testing1.txt ‏1 KB
Untitled 231_LV80.vi ‏23 KB

Run the Report as a Background job and Get the Output in Excel in Local PC

Hello Gurus,
I have one following requirement.
One should be able to run the report as a background job and it should be possible to get the report in Excel format, also when running the report in background. The excel report should have the same information and look as the current SAPreport.
Please provide some solution.
Any helpful answer get surely awarded.
Thanks a lot,
Varlanir

GUI_* WS_* Function In Background, CSV Upload
GUI_* and WS_* function modules do not work in background
When scheduling a job in the background the appropriate statement to read in your file is OPEN DATASET, and the file must be on the file system that the SAP server can see.
At anytime, a user can switch of the Personal Computers even though the job is still running in the background. Therefore GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer file.
To choose the correct download method to used, you can check the value of SY-BATCH in your code,
if it is 'X' use OPEN DATASET and if it is ' ' use WS_UPLOAD.
*-- Open dataset for reading
DATA:
dsn(20) VALUE '/usr/test.dat',
rec(80).
OPEN DATASET dsn FOR INPUT IN TEXT MODE.
IF sy-subrc = 0.
DO.
    READ DATASET dsn INTO rec.
    IF sy-subrc <> 0.
      EXIT.
    ELSE.
      WRITE / rec.
    ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET dsn.
*-- Open dataset for writing
DATA rec(80).
OPEN DATASET dsn FOR OUTPUT IN TEXT MODE.
TRANSFER rec TO '/usr/test.dat'.
CLOSE DATASET dsn.
What is the difference when we use upload, ws_upload, gui_upload function modules?
UPLOAD, WS_UPLOAD, GUI_UPLOAD, are used in BDC concepts. ie., Batch Data Communication.
Batch Data Conversion is a concept where user can transfer the Data from non SAP to SAP R/3. So , in these various Function Modules are used.
UPLOAD--- upload a file to the presentation server (PC)
WS_UPLOAD----    Load Files from the Presentation Server to Internal ABAP Tables.
WS means Work Station.
This is used upto SAP 4.6 version.
GUI_UPLOAD-------    Replaces WS_UPLOAD. Upoad file from presentation server to the app server. From 4.7 SAP version it is replaced.
How to Upload csv file to SAP?
Common File Download Upload Questions:
How you upload the data from text file to sap internal table? From my knowledge its by upload or gui_upload.
How you download the data from sap internal table to text file?
How you upload the data from xls (excel) file to sap internal table how you download the data from sap internal table to xls(excel) file.
You can upload data from presentation server to an internal table using gui_upload. Use gui_download to download from internal table to flat file.
Use fm ALSM_EXCEL_TO_INTERNAL_TABLE to upload data frm excel.
Use function module GUI_UPLOAD
The FILETYPE refer to the type of file format you need: For e.g 'WK1' - Excel format , 'ASC' - Text Format etc.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\test.csv'
   FILETYPE                      = 'ASC'
TABLES
    DATA_TAB                      = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.

How to export the text edit data to excel file without splitting the data in excel file?

how to export the text edit data to excel file without splitting the data in excel file?
I have a requirement in SAP HR where in the appraiser can add comments in the area given and can export that to excel file. Currently the file is getting exported but the comments getting split into deifferent rows.
I want the entire comment to be fit in one row.
Please help.
Thank you

Hi,
if your text edit value is stored in 'lv_string' variable.
then before exporting the value to excel you have to remove CL_ABAP_CHAR_UTILITIES=>NEWLINE
that is '#' from the variable lv_string.
for that use code some thing like this.
REPLACE ALL OCCURRENCES OF CL_ABAP_CHAR_UTILITIES=>NEWLINE in lv_string WITH space.
I think this will do the trick.

How to run the report and show the output in excel file

salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u all

Hi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
     ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

How to get the result of a method on a page

I use JDeveloper 11g
I want the result of a method (String) in the ApplicationModule on a page (jspx)
What I have done is:
1. make a method (getValue) in the ApplicationModule Algemeen (also in Client interface)
2. make a pagedef-file with executables and bindings, see
<executables>
<invokeAction id="doGetValue" Binds="getValue"
Refresh="renderModel"/>
<variableIterator id="variables" Refresh="renderModel">
<variable Type="java.lang.String" Name="getValueReturn"
IsQueriable="false" IsUpdateable="0"
DefaultValue="${bindings.getValue.result}"/>
</variableIterator>
</executables>
<bindings>
<methodAction id="getValue" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="getValue"
IsViewObjectMethod="false" DataControl="AlgemeenDataControl"
InstanceName="AlgemeenDataControl.dataProvider"
ReturnName="AlgemeenDataControl.methodResults.getValue_AlgemeenDataControl_dataProvider_getValue_result"/>
<attributeValues IterBinding="variables" id="ValueReturn">
<AttrNames>
<Item Value="getValueReturn"/>
</AttrNames>
</attributeValues>
</bindings>
3. on the page (jspx) I have an outputText-component:
<h:outputText value="#{bindings.ValueReturn.inputValue}"/>
But, it does not work, I don't get the result of the method on the screen.
Who can help me with this?

Hi,
Simple example below:
Suppose you have this method in AppmoduleImpl:
public void testHello( ) {
return "Hello";
1.After you expose this to clientInterface,drop this method on the jspx page as ADF Parameter
form
2.Drop the return String as outputText
3.Run the page,click on the commandButton & the outputText returns 'Hello'
Regards,
Shantala

How to get the resulting XML as string

Hello,
I think my question is very simple but i'm new in this area.
What i'm try to do is to parse a XML document with the DOM parser. Then i manipulate the DOM tree. After finishing the process i want to get the resulting XML document as an InputStream to give to another application for storing back into the database.
Until know i print the resulting XML to System.out or I write it to a file.
Do you know where i can find more information about this? Sample code??
Thanks!

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jinyu Wang ([email protected]):
You can try following code. It is not the simplest way, but it works for me:
// Print to temp buffer
ByteArrayOutputStream baos = new ByteArrayOutputStream();
DataOutputStream output = new DataOutputStream(baos);
Xml_doc.print(output);
String outtemp=baos.toString();
System.out.println(outtemp);
include following line for the lib:
import java.io.*;<HR></BLOCKQUOTE>
Many thanks for the reply. It works!

Get the data from excel and insert into the database

I want to read the data from excel file, get the data from excel and insert into the database.

You can use the Apache POI HSSF API to read data from Excel files and you can use the Sun JDBC API to insert data in database.
This has nothing to do with JSP/JSTL.

Extract the report into excel file

how to extract the report into excel file?
which function module i have to use ?

Hi Pavan,
If you want to download the displayed list in the Excel file,then at the time when the list is displayed on the screen, you can go to System option on the menu bar,from there go to List and then Save.You will get a pop up which shows you all the formats of download available.Select the one you want to and mention the target path of the file on the Presentation server.
Secondly,you can use the T-codes "CG3Y" to download the data from the Application Server to the Presentation Server and T-code "CG3Z" for vice-versa.
Or else you can use any of the FMs to first download the ABAP list to the ASCII or the BIN format and then convert it to excel using the FM "SAP_CONVERT_TO_XLS_FORMAT" or "TEXT_CONVERT_XLS_TO_SAP
I hope I have tried to answer your query.
In case of any further queries,please let know.
Regards,
Puneet Jhari.

I have pre 08 iphotos saved on disk. When I try and open the disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

I have pre 08 iphotos saved on disk. When I try and open the disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

Here's a test you can run:
1 - copy a set of photos from the disk to a folder on the desktop.
2 - download and unzip the Automator workflow Convert to JPG and Embed sRGB profile. You can download it from Toad's Cellar.
3 - select the files in the folder and drag and drop onto the workflow app.
4 - try to import the resulting files.
OT

Get the result in Excel File

Similar Messages

Maybe you are looking for