Get x,y,z or rotation after transformAround
After I call transformAround on the center of a panel it rotates correctly but it's x, y and z are the same as before the transform and it's rotation, rotationX, rotationY and rotationZ are also all 0. How do I get it's new orientation?
Thanks,
Bubba
After I call transformAround on the center of a panel it rotates correctly but it's x, y and z are the same as before the transform and it's rotation, rotationX, rotationY and rotationZ are also all 0. How do I get it's new orientation?
Thanks,
Bubba
Similar Messages
-
Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1
I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help
OK. If you believe that.
When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
I tell you those are the signs of a disk that is about to die.
Allan -
Open script cannot get connection from the brower helper after 15 seconds.
Error:
===
Open script cannot get connection from the brower helper after 15 seconds. Do you want to continue waiting for the browser to load?
Please Note:
========
1. I have tried this only on IE
2. I am running OATS on a Remote desktop
Situation:
======
Trying to stop the recording
Try to get xpath of an object using Inspect Path
Setup details
========
Windows XP 5.1 Service Pack 3, x86
OpenScript 12.1.0.1.383
Internet Explorer 8.0.6001.18702
FireFox 13.0.1
Mitigation steps done till now:
==================
1. Disabled windows firewall
2. Disable XSS filter setting
3. Restarted the ATS services (3 of them)
4. Run the Open Script Diagnosis Tool (PS: There are 3 errros even after running it. The 3 errros are listed in the workspace_log log file snippet below...)
Error in worspace_log:
=============
To Change setting:
Go to Tools > Internet Options and Choose Security Tab
Select the Zone to modify and Press Custom level
Find Enable XSS filter Setting - Select Disable and click Ok
!ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
!MESSAGE Failure found when diagnosing Oracle EBS/Forms Load Testing Forms LT Diagnoser
!ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
!MESSAGE Did not auto-fix the problem.
!ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
!MESSAGE Suggestion for fixing: Please change your Java proxy setting to Use Browser Settings
Aprreciate help on this.To resolve this, you need to reconfigure the "Oracle Application Testing Suite Helper Service" (OATSHelperSvr) to start as a user who has privledges to run open script tests rather than the default SYSTEM user.
Reconfiguring the OATSHelperSvr Service:
1. Open the services panel (Start > Run > services.msc)
2. Find the Oracle Application Testing Suite Helper Service
3. Right Click > Properties then select the Log On Tab
4. Specify an interactive user that has rights to run OpenScript (test by logging in as that user and running tests):
5. Click OK
6. Restart the service after dialogs are closed by Right Click > Restart
7. You should now repeat this process for the "Oracle Application Testing Suite Agent Service" (eLoadAgentMon) Service (Two services in
total)
You should now retry running the test in Oracle Test Manager -
Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.
Why can't we use Acrobat Pro for mobile devices? Save a whole lot of headaches!!! Now I have to return this subscription.
-
How do i get back my stateful session bean after it has been passivated
hi ,
How do i get back my stateful session bean after it has been passivated by container.
i'm confused that is it possible or not .......give me answer
i've one stateful sessionbean which i'm accessing throgh my normal java client . now what i'm doing is when i first time call a method it is running ......then i'm shutting down the server jboss .......it is calling my ejbPassivate() method ... at this particular time client program doesn't do anything.....
now after i restart my server i'm again calling back that business method with that last object reference.......it gives me the exception given below.....
java.rmi.NoSuchObjectException: no such object in table
java.rmi.NoSuchObjectException: no such object in table
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
at sun.rmi.server.UnicastRef.invoke(Unknown Source)
at org.jboss.invocation.jrmp.server.JRMPInvoker_Stub.invoke(Unknown Source)
at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerInterceptor.java:227)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:167)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:106)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
at $Proxy1.makeNewAcc(Unknown Source)
at client.GanJavaClient.main(GanJavaClient.java:46)so pls tell me that is it possible to get back that session besn or notStateful session beans are not persisted across restart of the EJB server instance(s) hosting them. You can't treat a Session bean as one would an entity bean.
Chuck -
how do i get my photos back on usb after editing. i used export but after checking my photos were not back on usb?
You're really going to need to explain that. What's "USB"? Do you mean a Disk, Drive or volume connected by USB? How is your iphoto set up? What version are you using?
Regards
TD -
have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8. -
HT1222 How do i get apps back on my ipod after upgraging to ios5.1
How do i get apps back on my ipod after upgraging to ios5.1
You can sync your iPod with iTunes (if you have got your apps there) or go to App Store > Updates > Purchased
-
I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.
Look in the HD/Applications folder.
-
How do get my ipod to work again after it died
How do i get my ipod to work again after it died and wont charge?
Well...hm... Your going to have to replace it, or get it serviced. Or give it to Apple for a 10% discount on another. What gen is it? Some people buy broken iPods like:
https://www.gazelle.com
or maybe its spelled https://www.gazzelle.com
I dont remember -
How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?
If you have iOS 5 installed on it, you don't need a PC. simply turn it on and set it up.
if you don't have iOS 5 then you'll need a computer. -
I have many projects made in imovie HD that are not updating to iMovie 10 on my new iMac. Why is this not working as stated on the article HT202853? How do I get my projects back from backup after old iMac crashed?
According to:
Update projects and events from previous versions of iMovie in iMovie (2014) - Apple Support
you can update from iMovie versions 7, 8 and 9, but iMovie HD is iMovie 6.
Maybe you can update in two steps, first from iMovie 6 to iMovie 7, 8 or 9 then to iMovie 10.
Geoff. -
Getting error in sdp94 " data partly after horizon" any suggetionu2026
Hi gurus,
i have changed period in SBP and in SE38 planning area initialization in variants changed /SAPAPO/TS_PAREA_INITIALIZ ) , still getting error in sdp94 " data partly after horizon" any suggetionu2026
babuHi Babu,
Kindly check till when is the planning area initialized. Goto //msdp_admin, right click on the planning area---> Created time series objects. Check the date till when it is initialized. You can save the data only if it's in this period. In the planning book there may be dates after the planning horizon also in which case you can't save data.
Thanks and Regards,
Nithin.
Maybe you are looking for
-
A way to get content from MONI to SAP BW?
Hi, I'm a student and at the moment I'm working on a project to monitor the user behaviour on 40 SAP systems with 1 SAP BW. One source for that is the transaction st03n with the table MONI. As I know, the content from MONI can only be read out with A
-
For sending file in B2B scenario
Hello Friends, I need to pass a file to my client's business partner... I think its a B2B scenario... So how to transfer a file my client to his business parntner. Please suggest which adpter to use at receiver side and how to handle the configurati
-
After I restore the phone it takes about 20 minutes to an hour for the voicemails to show up again. This problem is very annoying especially since it's a new phone.
-
I tried all the steps to unlock my disabled itouch but it isn't working. I. After I do the restore steps the window that pops up is the same as before "you must enter the passcode on the ipod before it can be synced with this computer" I need more su
-
How to check user profile service working in sharepoint 2013?
HI All, How to check user profile service working or not in sharepoint 2013? Thanks.