Getting a list of files from a shared directory
Hi All,
I need to get a list of files from a shared directory on another server and put them in a HTMLB TableView element with links to the files.
I was not successful with CL_GUI_FRONTEND_SERVICES=>DIRECTORY_LIST_FILES. This method works in test mode, but gives me a gui_not_supported exception in BSP. I guess BSPs are not allowed to use this.
Is there any other alternative?
I need to be able to upload the files as well.
Thanks,
Roman
Message was edited by: Roman Dubov
Hi again,
Not sure about the shared directory files list...
In my opinion, this cannot be done using BSP.
But, you can try using VBScript to access the file system with object of that sort :
CreateObject("Scripting.FileSystemObject")
it is only a thought and you can be sure to cross security problems by accessing files through a Web application...
Best regards,
Guillaume
Similar Messages
-
How to get and read a file from META-INF directory
how to get and read a file from META-INF directory in a EJB project
Use this.getClass().getResourceAsStream("/META-INF/filename");This should work. Probably, you would need to set the Manifest Class-Path attribute.
-
Get a list of files from a folder
Hi I would like to know how could I get a list of files containing into a folder on my computer using javafx... can anyone help?
Thank you very much!
DanielI'll try that... i just want to list all videos containing into a folder intro grid =)
i thought that had a special way using javafx
Thanks
Edited by: skul3r on Dec 19, 2008 6:47 AM -
How to get the list of file from application server
Hi Expert.
I want to get the file list from dicrectory in application server
best regards.
AlexHi.
Yes, You are right, i can get the file list by AL11.
But i need get the list in ABAP program.
So i need a function modul to get the list. If you has some sample code, it should be very nice.
Best.
Alex -
Problem with getting a list of files in a directory
I'm trying to get a list of files in a particular directory. The problem is I'm also getting a listing of all the sub-directories too. Here is my code:
File directory = new File(dir);
File[] filelist;
filelist = directory.listFiles();
for(int i=0;i<filelist.length;i++)
System.out.println("FileName = " + filelist.getName());
What am I doing wrong?
Thanks
BradYou are not doing anything wrong. You just have to test whether a given file is a subdirectory:
File directory = new File(dir);
File[] filelist;
filelist = directory.listFiles();
for(int n = 0; n < filelist.length; n++) {
if (!filelist[n].isDirectory())
System.out.println("FileName = " + filelist[n].getName());
}Søren Bak -
Hi am having issues with getting the list of users from the Active Director
Hi am having issues with getting the list of users from the Active Directory, can anyone help me with this!
Hi Jason,
Try this:
1. In Ultiboard select Tools>>Netlist Editor>>Pins, press the Delete button
2. Select all nets in the Select the Net to Delete dialog and then press the Delete button. This will clear all nets in the layout, don't worry all traces, parts are still on the design.
3. Go to Multisim and select Transfer>>Forward annotate to Ultiboard. This will add all nets that you removed back and it should fix the pin problem
Tien P.
National Instruments -
How to get the list of materials from Sap r/3
Hi Experts,
I have one doubt, here iam implementing
HTTP TO RFC scenario.
My doubts are------
1. Should we create DT MT MI and all (OR) not
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
3.Or the second thing is how to get the list of materials start with some alphabate.
Please reply me for each and every questions mentioned above. Please clarify me.
Helpful answers wil be rewarded.
Reagards
khannaHi Khanna,
<i> 1. Should we create DT MT MI and all (OR) not</i>
Yes U need to create for HTTP site...for RFC U need to import..
<i>2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).</i>
You create your own structres for Request and respoce.. and Map it with RFC..
<i>3.Or the second thing is how to get the list of materials start with some alphabate.</i>
I think it will come with acending order....
for more help go through this link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
regards,
Ansar. -
How to upload a text file from a shared folder and provide an o/p
how to upload a text file from a shared folder and provide an o/p containing the details in each order in the text file
Hi,
Use <b>GUI_UPLOAD</b> to upload a text file from a shared folder.
Use <b>GUI_DOWNLOAD</b> to download data in a file on the presentation server or use <b>OPEN DATASET, TRANSFER</b> and <b>CLOSE DATASET</b> statements to download data to the application server.
Now, I hope the code for data fetching, if required, is already present in the report.
Reward points if the answer is helpful.
Regards,
Mukul -
How can I get data in flat file from Pool table and cluster table ?
Hi,
I am working in one Achiving project. My requirement is to get data into flat file from Cluster table and pool table.
Is there any tool avilable to download data into flat file from pool table and cluster table ?
if table name given in the selection screen then data will be downloaded into flat file.
waiting for quick response.
Best Regards,
BansidharData cannot be retrived directly form the cluster table
as the Cluster results are stored in Cluster Key say for example PCLkey
and form that Key we need to fetch the data
these clustes are not the part of PNP or PNPCE tables
for ur info kindly check -
Functional module to get the File from a given Directory
Hi all,
I am using a FM name 'subst_get_file_list' to get the file from a given directory but it is accepting only 40 Character length file only my requirement is to accept file name other than 40 char,
give me good sugestion
regards
paulHi Paul,
Check the Function Module Gayathri has given. ie. 'SO_SPLIT_FILE_AND_PATH'.
In the exporting parameter FULL_NAME , give the path name and in the importing parameter stripped_name , you will get the filename.
Check this code.
REPORT ZSHAIL_SPLITFILE.
data: it_tab type filetable with header line,
gd_subrc type i.
tables: rlgrap.
data: path type string,
file_name type string.
parameters file_nam type rlgrap-filename .
data: user_act type i.
at selection-screen on value-request for file_nam.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
WINDOW_TITLE = 'select a file'
DEFAULT_EXTENSION = '*.txt
DEFAULT_FILENAME = ''
FILE_FILTER = '*.txt'
INITIAL_DIRECTORY = ''
MULTISELECTION = abap_false
WITH_ENCODING =
CHANGING
file_table = it_tab[]
rc = gd_subrc
USER_ACTION = user_act
FILE_ENCODING =
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
others = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if user_act = '0'.
loop at it_tab.
file_nam = it_tab-filename.
endloop.
endif.
path = file_nam.
CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH'
EXPORTING
full_name = path
IMPORTING
STRIPPED_NAME = file_name
FILE_PATH =
EXCEPTIONS
X_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
at selection-screen.
message i001(zmess) with file_name.
Regards,
SP. -
How do I get a list of files in the DataDrvUser Dir programatically (no dialogs)
I have version 8.1.1292 of Diadem. I wish to get a list of files in a directory without using a dialog.
Hello Sweeten
Attached are two snipits of code, hope this helps
The following sub reads all the folders in a root folder. Note the use the FSO or file system object. The FSO has a number of properties and methods for working with files and folders, would definetly check it out.
Sub ReadProjects()
'This sub reads all the Folders in the root
Set fso = CreateObject("Scripting.FileSystemObject")
Set Folder = fso.Getfolder(RootPath_)
Set Folder = Folder.SubFolders
i=1
For Each SubFolder In Folder
LstStates.Items.add SubFolder.name,i
i=i+1
Next
End Sub
This next code snipit reads all the files of a certain extention (i.e. LPD,DAT)
Sub ReadProjectFiles()
Dim fso,PathName,LvdNames,GraNames,path
Dim x,y,z
x=1:y=1:z
=1:w=1
Set fso = CreateObject("Scripting.FileSystemObject")
Set Folder = fso.Getfolder(ProjectPath_)
Set Files = Folder.Files
For Each file In files
Select Case file.type
Case "LPD File"
LstGraph.items.add file.name , x
x=x+1
Case "DAT File"
LstData.Items.add file.name , y
y = y+1
Case "LVD File"
LstView.Items.add file.name , z
z = z+1
End Select
Next
Let me know if this is helpful
Tom Ferraro
DIAdem Product Manager
512-683-6841 -
How to get InputStream of uploaded file from request?
The situation:
Client is uploading xml file to server.
<form METHOD=POST ENCTYPE = "multipart/form-data" action="SendFile" accept="text/xml">
<input type="file" name="SentFile" />
<input type="submit" value="go"/>
</form>Then I need to parse data from file.
I want to use method javax.xml.parsers.DocumentBuilder.parse(InputStream is)
But, how to get InputStream of uploaded file from request?You cannot get the InputStream of the uploaded file directly. The InputStream you can obtain from request.getInputStream() contains a lot of other data as well as the uploaded file. You will have to parse the data in the InputStream to find the data that belongs to the file.
A short cut is to use the HTTP Multipart File Upload available from www.jenkov.com. It simplifies file upload and makes it easy to obtain an InputStream for only the uploaded file. It also handles upload of multiple files. It is free, open source, Apache license, so if it doesn't fit your needs, you can always read the code and see how it works. Then write your own upload servlet. -
Read and List the Files from Remote Webserver Path
Hi All,
I have requirement where i need to Read and List the files from a Folder of Remote webserver path using JAVA.
Remote webserver is within the network only...No Firewall and also Access is given to Read the folder. No Issues on this.
Folder will just contain some PDF files...
I just need to display the PDF file names available in the Folder..
No need to read the PDF File...Only required to read the folder to list the file names in it.
Looking forward some workaround to this.
Thanks and Regards.I need to read the folder from a webserver path of different machine...
File dir = new File( prop.getProperty("inputPath"));
File[] files = dir.listFiles(fileFilter);
final String match=siteName;
final String type=reportType;
Calendar c1 = Calendar.getInstance();
c1.add(Calendar.MONTH, - Integer.parseInt(prop.getProperty("filterMonths"))); //Filters reportes generated in last X months (X picked from config file)
final long filterDate = c1.getTime().getTime();
FileFilter fileFilter = new FileFilter() {
public boolean accept(File file) {
long fileLastModiDate = file.lastModified();
if((fileLastModiDate >= filterDate) && (file.getName().toLowerCase().startsWith(match)) && ( (type.equals("M") && file.getName().indexOf("WIP")==-1) || ((!type.equals("M") && file.getName().indexOf("WIP")!=-1)) ) ) {
return true;
}else {
return false;
Here it works fine if the input path is local machine..
But i need to know how to give the input path as WEBSERVER PATH of different machine?? -
Getting the list of files in a directory by their last modified date
Dear friends,
I want to get the list of files in a directory sorted by their last modified date.
By default the file.list() or listFiles() return files sorted by their name in ascending order.
Please give me your suggestions.
Thanks in advance,
James.Thanks friend,
I myself got the answer
here is my code:
public File[] getSortedFileList(File dir){
File[] originalList = dir.listFiles();
int numberOfFiles = originalList.length;
File[] sortedList = new File[numberOfFiles];
long[] lastModified = new long[numberOfFiles];
for(int i = 0; i < numberOfFiles; i++){
lastModified[i] = originalList.lastModified();
Arrays.sort(lastModified);
for(int i = 0; i < numberOfFiles; i++){
for(int k = 0; k < numberOfFiles; k++){
if(originalList[k].lastModified() == lastModified[i])
sortedList[i] = originalList[k];
System.out.println("The sorted file list is:" + sortedList[i]);
return sortedList; -
How do I get my list of contacts from Gmail to my iPad2 so I can send email from the iPad?
Take a look at this help site that I found by using Google ...
http://support.google.com/mobile/bin/answer.py?hl=en&answer=138740
Maybe you are looking for
-
Older version of gnutls needed
I have come across this problem twice already, in my short life as an Archer. I install a package with pacman, and when I try to run the program, I get this message: gucharmap: /usr/lib/libgnutls.so.12: version `GNUTLS_1_2' not found (required by /op
-
Why are SMS notifications only audible on my Bluetooth headset?
I am using my iPhone 3GS (v3.1.2) with a Jabra BT530 bluetooth headset. As most people, I don't wear the headset unless I am actually on a phone call. It is absolutely incomprehensible to me that notifications for new text messages are ONLY audible o
-
Pricing problem very important
Hi, i have done the follwing procedure 1) Added material type MTART field in the field catalog 2) Created a table and generated it. 3) This table is used in a access sequence XXXX in the 1st line with exclusion indicator. 4) Maintained the condtion r
-
J2re is not installed from j2se package
this only happens in windows 2003 (1) using another installer to call j2se 1.4.2_01 installation (2) select only development tools and jre then install (3) only development tools gets installed is this known issue??
-
Need help fixing useragent issue
After I updated to 13.0.1, my useragent said i was using firefox 4.0. I uninstalled completely, and re-installed, and still get the same result