Getting a weird error in Report Writer Report(ABAP Reporting tool)

Hi Guys,
If anybody has worked on Report Writer Report.Can you help me in this regards?
There is a peculiar problem for the (Column block) .In the Column block there are 3 key figures(Quantity,Local Currency and Group Currency).
Of these in the output of the Report Writer Report the Quantity Column is not getting summed up properly.Though the other 2 columns(Local Currency and Group Currency)are reflecting the proper summed up data.
According to the tables, all of them are reflecting the accurate data.But only for the Quantity column though its reflecting the actual data,but the summation for it is not reflecting the correct data.
Can anybody tell me if we can attach screen-shots for Questions posted in Forums?
Please help me in this regards.

Hi James,
Thank you for your quick response.
I checked the report and the remainder functions is not being used.
The only formulas being used in the report are the following.
UpperCase ([1])
+ ", " + - This is set to @name
{@name} + " (" + + ")"
There are some formatting formulas set on the above values, but other than that, there is a sql query and the "select distinct rows" and "perform grouping on server" is selected.
Thanks,
Jayashree

Similar Messages

Convert SQL*Report Writer V1 to Reports V6

Is there an Oracle utility to convert the old SQL*Report Writer REPs to Reports V6 RDFs? Also, will Reports V6 for Unix be able to use our REPs from SQL*Report Writer V1?
We are moving to a new server and updating our Oracle software. As a test, we are attempting to rewrite / convert some of our reports from our Unix platform to a test NT server. Once we get to the new Unix server and Oracle, we will have to convert the old REPs to the new Reports for Unix.

You can convert SQL*ReportWriter v1.1 reports to Oracle Reports 2.5/3.0 and then to Oracle Reports 6.0. I know there is a migration tool that comes with 2.5, though I'm not sure about 3.0.

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

What is Report Writer in Abap ?

What is Report Writer in Abap ?
How we can write a simple report through report writer .
It's Tcode , How to proceed ?
I developed several report through ABAP , but i have no clue about Report Writer .
What is advantage to using it .
Plz give some Example .
Regards : rajneesh

Hi,
see the help
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
Regards
Kiran Sure

Without using GET PERNR, how to retierve data in HR ABAP Reports

Hi Experts,
How to retrieve the data without using GET PERNR, by using function modules in HR ABAP Reports.
Thanks.
Naveen.

Hi,
U can use HR_READ_INFOTYPE Function Module in Place of GET PERNR.
Go through the following link it will give the example of that FM.
http://www.experts-exchange.com/Database/Software/ERP/SAP/Q_20781600.html
<REMOVED BY MODERATOR>
Edited by: subas Bose on Feb 15, 2008 2:46 PM
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 3:06 PM

Getting error while printing PDF from ABAP Report

hi everyone,
I am trying to print PDF form from a report. But the output i get is an error msg on the Paper
ERROR: limitcheck
OFFENDING COMMAND: PDF Parser: Damaged PDF file, failed reading trailer STACK:
thanks.

Some additional information:
In the defaulttrace, I can see this:
Service XMLFormService: Native process (PID=15892) E:\usr\sap\PEP\JC00\j2ee\os_libs\adssap\XMLFormService\bin\XMLForm.exe terminated abnormally with error code 128
Processing exception during a "Render" operation.
Request start time: Fri Mar 06 10:11:55 CET 2009
com.adobe.ProcessingException: XMLFM Exception during render: org.omg.CORBA.COMM_FAILURE
Exception while connecting to <SERVER-IP>:3533
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method

Getting this weird error

# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d03b7cd, pid=2752, tid=2804
# Java VM: Java HotSpot(TM) Client VM (11.0-b12 mixed mode, sharing windows-x86)
# Problematic frame:
# C [awt.dll+0x3b7cd]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x02ee4400): JavaThread "AWT-Windows" daemon [_thread_in_native, id=2804, stack(0x03220000,0x03270000)]
siginfo: ExceptionCode=0xc0000005, writing address 0xe1fe8c80
Registers:
EAX=0x17e4d6c4, EBX=0x00000bf4, ECX=0x00000100, EDX=0xe1fe8c80
ESP=0x0326f3a4, EBP=0x00000400, ESI=0x17e4d6c4, EDI=0xe1fe8c80
EIP=0x6d03b7cd, EFLAGS=0x00010206
Top of Stack: (sp=0x0326f3a4)
0x0326f3a4: 0326f47c 00000100 0326f484 00000100
0x0326f3b4: 6d0a462a 00000400 00000400 00000100
0x0326f3c4: 00000100 0326f600 0326f400 00000000
0x0326f3d4: 00000000 00000100 02be8828 00000100
0x0326f3e4: 00000400 e1fe8c80 0010e4c0 00000000
0x0326f3f4: 00000000 00000100 00000100 00000000
0x0326f404: 00000000 00000100 00000100 00000000
0x0326f414: 00000000 00000004 00000400 00000000
Instructions: (pc=0x6d03b7cd)
0x6d03b7bd: 00 00 00 8b 4c 24 14 8b e9 c1 e9 02 8b f0 8b fa
0x6d03b7cd: f3 a5 8b cd 83 e1 03 f3 a4 8b 74 24 18 8b 4c 24
Stack: [0x03220000,0x03270000], sp=0x0326f3a4, free space=316k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [awt.dll+0x3b7cd]
[error occurred during error reporting (printing native stack), id 0xc0000005]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j sun.awt.windows.WToolkit.eventLoop()V+0
j sun.awt.windows.WToolkit.run()V+69
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x02f00400 JavaThread "Thread-6" daemon [_thread_blocked, id=4036, stack(0x04050000,0x040a0000)]
0x02fd5c00 JavaThread "Thread-5" daemon [_thread_blocked, id=3692, stack(0x03990000,0x039e0000)]
0x02fe7c00 JavaThread "Thread-4" daemon [_thread_in_native, id=2840, stack(0x03940000,0x03990000)]
0x02fcb000 JavaThread "Thread-3" daemon [_thread_blocked, id=2820, stack(0x038f0000,0x03940000)]
0x02fa8000 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=2000, stack(0x03870000,0x038c0000)]
0x00396400 JavaThread "DestroyJavaVM" [_thread_blocked, id=2360, stack(0x003b0000,0x00400000)]
0x02f6d800 JavaThread "TimerQueue" daemon [_thread_blocked, id=2228, stack(0x03670000,0x036c0000)]
0x02f6ac00 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=580, stack(0x03620000,0x03670000)]
=>0x02ee4400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=2804, stack(0x03220000,0x03270000)]
0x02ec7000 JavaThread "AWT-Shutdown" [_thread_blocked, id=3564, stack(0x031d0000,0x03220000)]
0x02e94000 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1264, stack(0x03180000,0x031d0000)]
0x02e9e400 JavaThread "EventQueue" daemon [_thread_blocked, id=728, stack(0x030e0000,0x03130000)]
0x02b21400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2384, stack(0x02dd0000,0x02e20000)]
0x02b1b000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1532, stack(0x02d80000,0x02dd0000)]
0x02b19800 JavaThread "Attach Listener" daemon [_thread_blocked, id=3844, stack(0x02d30000,0x02d80000)]
0x02b18400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3968, stack(0x02ce0000,0x02d30000)]
0x02b13400 JavaThread "Finalizer" daemon [_thread_blocked, id=2356, stack(0x02c90000,0x02ce0000)]
0x02b0ec00 JavaThread "Reference Handler" daemon [_thread_blocked, id=2644, stack(0x02c40000,0x02c90000)]
Other Threads:
0x02b0d000 VMThread [stack: 0x02bf0000,0x02c40000] [id=1772]
0x02b23400 WatcherThread [stack: 0x02e20000,0x02e70000] [id=2316]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 960K, used 761K [0x16960000, 0x16a60000, 0x17d10000)
eden space 896K, 77% used [0x16960000, 0x16a0e630, 0x16a40000)
from space 64K, 99% used [0x16a40000, 0x16a4fff8, 0x16a50000)
to space 64K, 0% used [0x16a50000, 0x16a50000, 0x16a60000)
tenured generation total 11972K, used 8697K [0x17d10000, 0x188c1000, 0x26960000)
the space 11972K, 72% used [0x17d10000, 0x1858e578, 0x1858e600, 0x188c1000)
compacting perm gen total 12288K, used 5163K [0x26960000, 0x27560000, 0x2a960000)
the space 12288K, 42% used [0x26960000, 0x26e6afd8, 0x26e6b000, 0x27560000)
ro space 8192K, 63% used [0x2a960000, 0x2ae6bdf8, 0x2ae6be00, 0x2b160000)
rw space 12288K, 52% used [0x2b160000, 0x2b7ba3c8, 0x2b7ba400, 0x2bd60000)
Dynamic libraries:
0x00400000 - 0x00424000      C:\WINDOWS\system32\javaw.exe
0x7c900000 - 0x7c9b5000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c900000      C:\WINDOWS\system32\kernel32.dll
0x77f40000 - 0x77feb000      C:\WINDOWS\system32\ADVAPI32.dll
0x77da0000 - 0x77e32000      C:\WINDOWS\system32\RPCRT4.dll
0x77f10000 - 0x77f21000      C:\WINDOWS\system32\Secur32.dll
0x7e390000 - 0x7e421000      C:\WINDOWS\system32\USER32.dll
0x77e40000 - 0x77e89000      C:\WINDOWS\system32\GDI32.dll
0x76330000 - 0x7634d000      C:\WINDOWS\system32\IMM32.DLL
0x7c340000 - 0x7c396000      C:\Program Files\Java\jre6\bin\msvcr71.dll
0x6d800000 - 0x6da56000      C:\Program Files\Java\jre6\bin\client\jvm.dll
0x76af0000 - 0x76b1e000      C:\WINDOWS\system32\WINMM.dll
0x6d280000 - 0x6d288000      C:\Program Files\Java\jre6\bin\hpi.dll
0x76bb0000 - 0x76bbb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d7b0000 - 0x6d7bc000      C:\Program Files\Java\jre6\bin\verify.dll
0x6d320000 - 0x6d33f000      C:\Program Files\Java\jre6\bin\java.dll
0x6d7f0000 - 0x6d7ff000      C:\Program Files\Java\jre6\bin\zip.dll
0x6d000000 - 0x6d136000      C:\Program Files\Java\jre6\bin\awt.dll
0x72f70000 - 0x72f96000      C:\WINDOWS\system32\WINSPOOL.DRV
0x77be0000 - 0x77c38000      C:\WINDOWS\system32\msvcrt.dll
0x774a0000 - 0x775dd000      C:\WINDOWS\system32\ole32.dll
0x5b190000 - 0x5b1c8000      C:\WINDOWS\system32\uxtheme.dll
0x6d220000 - 0x6d274000      C:\Program Files\Java\jre6\bin\fontmanager.dll
0x10000000 - 0x10171000      C:\WINDOWS\system32\nview.dll
0x77e90000 - 0x77f06000      C:\WINDOWS\system32\SHLWAPI.dll
0x7c9c0000 - 0x7d1e2000      C:\WINDOWS\system32\SHELL32.dll
0x770e0000 - 0x7716b000      C:\WINDOWS\system32\OLEAUT32.dll
0x5d4e0000 - 0x5d57a000      C:\WINDOWS\system32\COMCTL32.dll
0x77bd0000 - 0x77bd8000      C:\WINDOWS\system32\VERSION.dll
0x77390000 - 0x77493000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\comctl32.dll
0x77650000 - 0x77671000      C:\WINDOWS\system32\NTMARTA.DLL
0x71b80000 - 0x71b93000      C:\WINDOWS\system32\SAMLIB.dll
0x76f20000 - 0x76f4d000      C:\WINDOWS\system32\WLDAP32.dll
0x03380000 - 0x033ce000      C:\WINDOWS\system32\NVWRSNL.DLL
0x746a0000 - 0x746ec000      C:\WINDOWS\system32\MSCTF.dll
0x03410000 - 0x0346d000      C:\Program Files\Actual Window Minimizer\awmemb.dll
0x75250000 - 0x7527e000      C:\WINDOWS\system32\msctfime.ime
0x4fd10000 - 0x4feb6000      C:\WINDOWS\system32\d3d9.dll
0x6deb0000 - 0x6deb6000      C:\WINDOWS\system32\d3d8thk.dll
0x6d610000 - 0x6d623000      C:\Program Files\Java\jre6\bin\net.dll
0x71a30000 - 0x71a47000      C:\WINDOWS\system32\WS2_32.dll
0x71a20000 - 0x71a28000      C:\WINDOWS\system32\WS2HELP.dll
0x6d630000 - 0x6d639000      C:\Program Files\Java\jre6\bin\nio.dll
0x036d0000 - 0x036e5000      C:\WINDOWS\system32\nvwddi.dll
0x719d0000 - 0x71a10000      C:\WINDOWS\System32\mswsock.dll
0x76ee0000 - 0x76f07000      C:\WINDOWS\system32\DNSAPI.dll
0x76f70000 - 0x76f78000      C:\WINDOWS\System32\winrnr.dll
0x16080000 - 0x160a5000      C:\Program Files\Bonjour\mdnsNSP.dll
0x76d20000 - 0x76d39000      C:\WINDOWS\system32\Iphlpapi.dll
0x76f80000 - 0x76f86000      C:\WINDOWS\system32\rasadhlp.dll
0x61200000 - 0x61259000      C:\WINDOWS\system32\hnetcfg.dll
0x71a10000 - 0x71a18000      C:\WINDOWS\System32\wshtcpip.dll
VM Arguments:
jvm_args: -Xmx256m
java_command: com.speljohan.rsbot.Application GUIController nonmembers
Launcher Type: SUN_STANDARD
Environment Variables:
CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\TortoiseSVN\bin;C:\Program Files\QuickTime\QTSystem\
USERNAME=gavin van der star
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 6 Stepping 4, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 2 (2 cores per cpu, 1 threads per core) family 15 model 6 stepping 4, cmov, cx8, fxsr, mmx, sse, sse2, sse3
Memory: 4k page, physical 2095532k(1209308k free), swap 4032792k(3244508k free)
vm_info: Java HotSpot(TM) Client VM (11.0-b12) for windows-x86 JRE (1.6.0_10-beta-b25), built on May 29 2008 00:51:46 by "java_re" with MS VC++ 7.1
time: Thu Nov 20 17:54:40 2008
elapsed time: 9 seconds

prakashdewangan wrote:
This is not a weird error... This is Java HotSpot... It comes when java is unable to continue run and it has to Exit. Like in windows you would have seen error box when program terminates.
The posted trace is from a windows box.
Java HotSpot generely I have seen because of Too High CPU usage (and memory too). Java does not get enough resource to run... Please check your code where is the Loop which needs high resource... try to refactor that code...No.
Standard general causes of this.
- Use of JNI or a third party library that uses JNI
- A combination of video drivers, video card and fonts. This one is less prevalent than it used to be.
- Bad environment, memory, installs, programs, etc.
- Bug in the VM.
Presuming in your reported case that none of the other causes applied then you found a bug in the VM. That doesn't mean that anyone else found the same one.

Error reason in moni as ABAP report.

Hi,
Can We get error/exception message which we see in trace of moni as a Abap report.
Like when a message is failed,in the report it should state the message guid and reason for the error Like com.sap*********** Cannot produce target element CID********...
I cant go ahead with the alerts coz the user wants an ABAP report only for the error files.
I Searched through SDN and found some blogs where in i can get reports for no.of processed files per day or no.of error files per day etc.. But i havent find suitable blog/thread for the above requirement.
Any Help would be appreciated.
Thanks,
Kiran

Hi Kiran,
XI message is actually stored in different tables,
SXMSPMAST, SXMSPMAST2 XML Message master Table, contains runtime information on XML messages processed by XI; in this table you can find all the information that is visible in SXMB_MONI.
Please also check these links.
/people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
http://wiki.sdn.sap.com/wiki/display/XI/Useful%20ABAP%20tables%20in%20SAP%20XI
http://wiki.sdn.sap.com/wiki/display/XI/XI+Tables
SXMSPMAST2 (SXMSPMAST): This table contains runtime information on XML messages processed by XI; in this table you can find all the information that is visible in SXMB_MONI. Master table for runtime information on XML messages.
SXMSPERRO2: this table contains entries of error messages (only exception is NO_RECEIVER_STOP which is also mentioned in this table.) Store information on error messages in XI.
use the above tables to generate a report according to ur needs .
Just chk this blog for help :-
https://wiki.sdn.sap.com/wiki/display/Snippets/PIMonitoringFunctionality-FetchingDatafromSXMB_MONIStandardTables-PartII
Regards,
Rohit

Report Writer (GR55 Txn) reports via Web Dynpro

Hello,
Has anybody been able to run Report writer reports but render the output in a webdypro?
Basically I am looking for a way to run the report but capture the data output and render it on the Web.
regards,
Atul Kulkarni

Bala,
We want to use the portal to publish the reports too but NOT in SAPGUI on the web.
We were actually able to get it to work with an SAPGUI iView or "SAPGUI HTML" iView.
However we want to capture the output of the report writer reports and render them in ABAP or JAVA webdynpro technology.
Our Top Management does not like anything that resembles SAPGUI.
How did you all do it?
regards,
Atul

Moving from IQ Report Writer to Crystal Reports

Hi everyone,
My company is looking to make the switch from IQ Report Writer 5 to Crystal Reports XI or 2008.
We have a couple questions though on how to make this switch easier.
I may need to talk to Business Objects support instead, but I thought I'd try here first.
Our data currently resides in a vision file format which is type of flat file.
Currently with the IQ Writer, we can establish IQ Views, which are essentially just predefined links between the different data tables. A user selects which view they will use for a report, then are able to pick and choose which columns to use from that view. A view may contain many tables, but when the report is generated, it will only access the tables necessary based on the columns selected.
Example: IQ View A constists of Tables A, B, and C. The view is defined as A.Column1 = B.Column1 and B.Column2 = C.Column2. If a user chooses columns from A and B, then the query only runs against tables A and B and doesn't have to process the data from C, which cuts down processing Cost.
Is there any way to create views like this in Crystal Reports XI? I know if we convert to SQL Server (which we have done for some users) we can create SQL Views, but the thing I noticed with SQL Views, was that it ran the query against Tables A, B, and C, even though C wasn't needed and it ended up returning duplicate rows. I could get around the duplicate info with a select distinct statement, but it still had to process the extra info, which increased the cost.
Any feedback would be greatly appreciated. If it's a question for Business Objects Support, let me know.

Actually, the problem has to do more with the joins than anything, I got a little more clarification on this.
The tables have many to one relationships. My example is one company has many sites, and each site has many repair orders, and each repair order can have multiple jobs. So here's a sample sql select statement that I'd use for a view and the problem with it:
Create View Jobs_by_Site as
Select A.site_number, B.ro_number, C.roline_job
From A inner join B on A.site_number = B.ro_site
inner join C on B.ro_number = C.roline_ronumber
So if I were to run this, I'd see down to the detail what jobs were done per site etc. Not a problem, I need every table to return the query and every record would be unique.
The problem comes from when you only need the site number and the ro_number.
Select site_number, ro_number from Jobs_by_Site
You get lots of duplicates. You could say select distinct, but it's still processing rows from table C because by nature of the view, you are saying:
Select site_number, ro_number from
(Select A.site_number, B.ro_number, C.roline_job
From A inner join B on A.site_number = B.ro_site
inner join C on B.ro_number = C.roline_ronumber).
Not sure if that clears things up or just muddles it more.
So the back story is this. Our database, though well documented, is fairly large. About 160 tables. Our end users work mainly in truck shops and their computer literacy ranges anywhere from very competent to "Just put the mouse down, and nobody will get hurt". So asking them to design their own reports is one thing, but then having them to pick and choose which tables to use as well as how they relate to each other just takes it to a whole new level.
So with IQ writer, one of the things we were able to do was define views, where we could set up predefined links between tables and group similar tables together. Any unused table wasn't used in the final query, which cut out duplicate rows and cut down on the number of records processed.
So does that make any sense?

Report Writer in a Report Tree

All,
I am having a problem migrating a report tree from a 3.1i environment to a 5.0 upgrade.
I have been successful with SAP Reports, Custom Z reports and ABAP Queries, but
Report Writer reports pose a problem.
To migrate I used the RTTREE_MIGRATION transaction SAP recommends. Seems this creates Y_ type transactions for some Custom Z reports and ABAP Queries. I have had to create Z t-code for the Queries and then override the generated Y_... transaction with the Z t-codes in the Area Menu.
The problem I am encountering with Report Writer / Report Painter is I believe the generated ABAP name assigned when the report is created seems to be a $TMP reports and the name seems to change whenever changes are made.
Im not sure if I can assign a Z t-code to Report Writer reports?
Any Suggestions?

The problem I am encountering with Report Writer / Report Painter is I believe the generated ABAP name assigned when the report is created seems to be a $TMP reports and the name seems to change whenever changes are made.
Well lots of reports in sales are using GR51/52 I dont think so its name changes every time , llike for example you have cost analysis report in Tr.Co02 as well as you have series of reports in MM like Mc.1 to MC.9 .
Im not sure if I can assign a Z t-code to Report Writer reports?
You can assign the Z T-codes to the program it `ll work !!
Hope thisll give you idea!!
P.S award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Report Painter versus ABAP Report

Hi everyone:
Can someone tell me what are pros and cons of developing OR Running reports in Report Painter?
Secondly can someone tell me when should one develop reports in ABAP and when should one develop reports in Report Painter?
Thanks in advance
R

Almost the entire SAP R3 System is written in ABAP u2013 including the Report Painter.
The Report Painter is a tool for the end user to create evaluation reports without having to involve the IT Department. He therefore has the information he requires within the limitations of the Report Painter very quickly. No programming involved.
An ABAP Report has to be written by a programmer/developer. It takes much longer, has to be tested, and, when everything is okay, be transported into the production system. This is time consuming and expensive. The report may have to modified at a later date u2013 again by a programmer/developer, which in turn also costs more time and money. A report created using the Report Painter can be modified or created immediately by the end user, i.e. low costs, immediate results.
I hope this clarifies the matter.

Why do I get the following error message when trying to use Report Builder in sql server 2012?

sukai

Hi sukai,
The issue is due to one or more of the files listed in the application manifest cannot be found on the server. We can upload all the deployment’s dependents files, and try again. And frequently this means that the application is somehow corrupted, or that
the ClickOnce store is corrupted. Please refer to the following thread to fix the issue.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/47c9f7c6-00ed-4980-9667-5c176ad7116a/ssrs-report-builder-application-cannot-be-started-contact-application-vendor
According to your screenshot, you are using Chrome. Please use IE browser try it again. SSRS not all report functionality is supported by all browsers. Please refer to the similar thread below:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ef9cb3f2-2acd-4947-b1fe-4724c51c61a2/unable-to-start-report-builder?forum=sqlreportingservices
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Weird error when doing "write mem"

Whenever I performed "write mem", I am
getting this error:
NYC#wr
Building configuration...
% Configuration buffer full, can't add command: line vty 0
%Aborting Save. Compress the config.[OK]
NYC#
NYC#wr
Building configuration...
% Configuration buffer full, can't add command: line vty 0
%Aborting Save. Compress the config.[OK]
NYC#
Basically, I can not save my config into
the flash. How can I fix this? Thanks.
David
NYC#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(12), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 29-Nov-04 15:40 by kellythw
Image text-base: 0x80008098, data-base: 0x819F9E70
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-IK9O3S3-M), Version 12.3(12), RELEASE SOFTWARE (fc3)
NYC uptime is 2 days, 8 hours, 38 minutes
System returned to ROM by power-on
System restarted at 03:21:09 UTC Wed Feb 21 2007
System image file is "flash:c2600-ik9o3s3-mz.123-12.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco 2621 (MPC860) processor (revision 0x102) with 59392K/6144K bytes of memory.
Processor board ID xxxxxxx (xxxxxxx)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
3 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
NYC#

i got the same error..
Richardson-CE1(config)#wr do wr
Building configuration...
% Warning: Saving this config to nvram may corrupt any network management or security files stored at the end of nvram.
Continue? [no]:
% Configuration buffer full, can't add command: description ALLOW-GRE-IPSEC-PREFIXES-FROM-MIXME-ROUTER
%Aborting Save. Compress the config, Save it to flash or Free up space on device[OK]
Richardson-CE1(config)#
i did service compress-config but the router is very slow right now.. any thoughts what might be causing the slow response of the device?

Keep getting a weird error message in AE CS4

I keep getting this error message concerning a few of the files in my Project bin:
I get this message multiple times when I open this particular project and repeatedly click "OK" until the project finishes opening up. The result is missing files. When I go to replace the file with the proper file which it already should be anyways it pops up this error message on me again. What does this mean and why are my files not able to be in AE? Sometimes they are and sometimes not.
I can drag the same file into the project bin and it will work fine (but I have to go through the trouble of putting it back in the correct spot in the layer stacking order in my compositions that use this particular file).

Hi, still having this problem. What's weird is it's intermittent. I'll go to open the project one day from the same drive hooked up the same way and it will work and then the next day, without even having imported anything into the project the previous day, it will give me the error and I'm screwed because there's so many files that are "missing". I tried renaming a long file name with only 10 characters in the finder and then replacing the file in AE and when I hit OK it gave me the same exact error message.

Getting a weird error in Report Writer Report(ABAP Reporting tool)

Similar Messages

Maybe you are looking for