Getting an error while executing ddl commands using dblink
Hi,
i am using Oracle9iR2 Version.
i have created a procedure like below to execute ddl commands on remote database through dblink using dbms_sql.
CREATE OR REPLACE PROCEDURE run_remote_ddl (p_dblink VARCHAR2, qry VARCHAR2)
AS
c_handle NUMBER;
feedback INTEGER;
stat VARCHAR2 (2000);
BEGIN
stat := 'select DBMS_SQL.open_cursor' || p_dblink || ' from dual';
EXECUTE IMMEDIATE stat
INTO c_handle;
stat :=
'begin DBMS_SQL.parse'
|| p_dblink
|| ' ('
|| c_handle
|| ','''
|| qry
|| ''', DBMS_SQL.v7); end;';
EXECUTE IMMEDIATE stat;
stat :=
' select DBMS_SQL.EXECUTE' || p_dblink || '(' || c_handle
|| ') from dual';
EXECUTE IMMEDIATE stat
INTO feedback;
stat :=
'declare x integer; begin x:= :1; DBMS_SQL.close_cursor'
|| p_dblink
|| '(x); end;';
EXECUTE IMMEDIATE stat
USING c_handle;
END;
when i run this procedure like below
begin
run_remote_ddl ('@dblink', 'create table scott.ttt(num number)');
end;
got an error:
ORA-06553: PLS-103: Encountered the symbol ".2" when expecting one of the following:
. ( * @ & = - + ; < / > at in is mod not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like
between ||
The symbol ". was inserted before ".2" to continue.
ORA-06512: at RUN_REMOTE_DDL", line 9
ORA-06512: at line 2
Please tell me how to resolve this.
Thanks in advance.
Hi,
>
ORA-06553: PLS-103: Encountered the symbol ".2" when expecting one of the following:
. ( * @ & = - + ; < / > at in is mod not rem
<an exponent (**)> or != or ~= >= <= <> and or like
between
>
Hope you are not typing 2 instead of @ as both are on the same key
Can you run the following and see what is happening
CREATE OR REPLACE PROCEDURE run_remote_ddl (p_dblink VARCHAR2, qry VARCHAR2)
AS
c_handle NUMBER;
feedback INTEGER;
stat VARCHAR2 (2000);
BEGIN
dbms_output.put_line(p_dblink);
stat := 'select DBMS_SQL.open_cursor@dblink from dual';
--stat := 'select DBMS_SQL.open_cursor from dual';
EXECUTE IMMEDIATE stat
INTO c_handle;
END;
exec run_remote_ddl('@dblink', 'create table scott.ttt(num number)');Regards
Edited by: yoonus on Feb 20, 2013 3:47 AM
Similar Messages
-
Error while generating DDL commands using startSQLRepository for a new Repository
Hi,
I am trying to generate DDL Commands using startSQLRepository for my new repository SubashRepository so that I can use them to create new table structure.
All the repository related changes looks good. i can see my repository in ACC
When I run the command:
startSQLRepository -m SupremeATG –repository /com/supreme/SubashRepository /com/supreme/subashRepository.xml -outputSQLFile C:/ATG/ATG9.3/SupremeATG/config/com/supreme/subashRepositoryDDL.txt
I get following error:
Table 'SUBASH_MEMBER' in item-descriptor: 'member' does not exist in a table space accessible by the data source. DatabaseMetaData.getColumns returns no columns
Note:
* errors related to definition file were cleared as the same command threw relevant exception while trying to store a array property with out creating a multi table.
* Now this is the only exception i see
* Some DDL are getting generated in the output file, but those are related to inventory repository (I am not sure why this is happening as I have specifically gave the path to my definition file).
Any help in resolving this is highly appreciated.Pl post in the ATG forum
-
DIAdem 2011: Error while executing "PicPDFExport" command
I'm using DIAdem v 11.3.0f4563 on Win2003 (32bit).
I'm unable to export reports to PDF (this has worked fine on previous DIAdem versions on the same HW/OS).
The problem occurs every time I select "File -> PDF Export..." from the menu.
First i get to select the file name, then a messagebox appears with the following text:
Error while executing "PicPDFExport" command.
Error type: UNKNOWN
Error address: 0000AEF7
Module name:kernel32.dll
After clicking "OK" the menus and buttons no longer work (but I'm able to switch between the different tabs), so I have to restart DIAdem.
I also have a script for exporting reports to DIAdem, this produces the same error message (but the rest of the application is still working after clicking OK, so no need to restart DIAdem).Hello salte,
Could you please let us know what OS you are using?
Thanks,
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary." -
I am getting a error while executing the Web Dynpro Application Page.
Hi All,
I am getting a Error while executing a web dynpro application :::
: Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component: Z_WEP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
I have checked this error description in ST22 :
What happened?
The exception 'CX_WDR_RT_EXCEPTION' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDR_CLIENT_APPLICATION=====CP' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component:
Z_XXP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
Can u plz help me regarding this error.
Thanks,
Deepika>Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered
Looks to me like you are trying to fire a navigation plug within WDDOMODIFYVIEW. According to the rules of the WD Phase Model this is not allowed. -
Error while executing jdbc commands but getting connection pool
I was not able to make a simple oracle connection and that hurts me.
The program(jsp) is...
<%@ page language="java" import="java.sql.*,java.io.*,
java.util.*,pac1.*,javax.naming.*,javax.sql.*"%>
<html>
<body>
<%
Context ctx= new InitialContext();
DataSource dsindogulf1=(DataSource)ctx.lookup("jnindogulf1");
Connection conn=dsindogulf1.getConnection();
if(conn!=null)
System.out.println(conn.toString());
else
System.out.println("sorry");
Statement st=conn.createStatement();
String string1="CREATE TABLE Authorr(col1 CHAR(10));";
st.executeUpdate(string1);
%>
</body>
</html>
If i delete the
st.executeUpdate(string1); then there is no problem I get the connection pool. That means i am getting the connection. But when i include the
st.executeUpdate(string1); there is an error which i cannot understand.. the error is
Error 500--Internal Server Error
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-00911: invalid character
at weblogic.jdbc.base.BaseExceptions.createException(Ljava.lang.String;Ljava.lang.String;I)Ljava.sql.SQLException;(Unknown Source)
at weblogic.jdbc.base.BaseExceptions.getException(I[Ljava.lang.String;Ljava.lang.String;I)Ljava.sql.SQLException;(Unknown Source)
at weblogic.jdbc.oracle.OracleImplStatement.execute()V(Optimized Method)
at weblogic.jdbc.base.BaseStatement.commonExecute()V(Optimized Method)
at weblogic.jdbc.base.BaseStatement.executeUpdateInternal()I(Unknown Source)
at weblogic.jdbc.base.BaseStatement.executeUpdate(Ljava.lang.String;)I(Unknown Source)
at weblogic.jdbc.wrapper.Statement.executeUpdate(Ljava.lang.String;)I(Statement.java:360)
at jsp_servlet.__test._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(__test.java:149)
at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(Optimized Method)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(Optimized Method)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(Optimized Method)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(Optimized Method)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava.lang.Object;(WebAppServletContext.java:6452)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(Optimized Method)
at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic.servlet.internal.ServletRequestImpl;Lweblogic.servlet.internal.ServletResponseImpl;)V(WebAppServletContext.java:3661)
at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic.kernel.ExecuteThread;)V(ServletRequestImpl.java:2630)
at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
the steps which i have followed are... I have made a connection pool using weblogic type 4 driver in the administrative console... then i have created the data source using jndi name jnindogulf1..... but although i am getting the connection pool i am receiving error ehice executing jdbc commands
please help
thanksbabuli nayak wrote:
I was not able to make a simple oracle connection and that hurts me.
The program(jsp) is...
<%@ page language="java" import="java.sql.*,java.io.*,
java.util.*,pac1.*,javax.naming.*,javax.sql.*"%>
<html>
<body>
<%
Context ctx= new InitialContext();
DataSource dsindogulf1=(DataSource)ctx.lookup("jnindogulf1");
Connection conn=dsindogulf1.getConnection();
if(conn!=null)
System.out.println(conn.toString());
else
System.out.println("sorry");
Statement st=conn.createStatement();
String string1="CREATE TABLE Authorr(col1 CHAR(10));";
st.executeUpdate(string1);
%>
</body>
</html>
If i delete the
st.executeUpdate(string1); then there is no problem I get the connection pool. That means i am getting the connection. But when i include the
st.executeUpdate(string1); there is an error which i cannot understand.. the error is
Error 500--Internal Server Error
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-00911: invalid character
at weblogic.jdbc.base.BaseExceptions.createException(Ljava.lang.String;Ljava.lang.String;I)Ljava.sql.SQLException;(Unknown Source)
at weblogic.jdbc.base.BaseExceptions.getException(I[Ljava.lang.String;Ljava.lang.String;I)Ljava.sql.SQLException;(Unknown Source)
at weblogic.jdbc.oracle.OracleImplStatement.execute()V(Optimized Method)
at weblogic.jdbc.base.BaseStatement.commonExecute()V(Optimized Method)
at weblogic.jdbc.base.BaseStatement.executeUpdateInternal()I(Unknown Source)
at weblogic.jdbc.base.BaseStatement.executeUpdate(Ljava.lang.String;)I(Unknown Source)
at weblogic.jdbc.wrapper.Statement.executeUpdate(Ljava.lang.String;)I(Statement.java:360)
at jsp_servlet.__test._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(__test.java:149)
at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(Optimized Method)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(Optimized Method)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(Optimized Method)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(Optimized Method)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava.lang.Object;(WebAppServletContext.java:6452)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(Optimized Method)
at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic.servlet.internal.ServletRequestImpl;Lweblogic.servlet.internal.ServletResponseImpl;)V(WebAppServletContext.java:3661)
at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic.kernel.ExecuteThread;)V(ServletRequestImpl.java:2630)
at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
the steps which i have followed are... I have made a connection pool using weblogic type 4 driver in the administrative console... then i have created the data source using jndi name jnindogulf1..... but although i am getting the connection pool i am receiving error ehice executing jdbc commands
please help
thanks
Hi. Remove the semicolon from your SQL string: stmt.executeUpdate("CREATE TABLE Authorr(col1 CHAR(10))");Joe -
Problem while executing a command using exec()
I'm trying to execute a command on Unix O/S with the help of java program. For this I have used Runtime class available in java.lang. It works fine for some of the basic unix commands like 'ls','cp' but when I tried to execute command "sqlldr userid=<user>/<pwd> control=/u01/dw/snb/log/sp_shd05721_ins_stg_sqlldr.ctl" , then it's not getting executed. Please advise.
You may be having a problem with the command path, which I don't think Runtime.exec() uses. Try specifying the full path
-
Getting an error while executing a report
Hi,
While generating a report through Tcode RSRT, I am getting an error message.
Its showing ,
"Element 3X7YU11DF0IQ7YARYGY0BU9ZN (version A) does not exist on the database".
Can you please help me out in this.
Thanks,
Jyothi.Hi Jyothi,
Did you make changes to the existing report or facing problem while creating new report? Either ways, it is something like some element of in the report has some realtion with others and that particular element is not there now. Just check if they are any exceptions or conditions in the report which were defined on the objects which were present earlier and removed later.
Something similar to the above scenario might be the case.
Hope this helps you.... -
Getting timeout error while executing my report
Hi experts,
I need to get data from a Ztable which is having more than 64 millions of records. That query itself is taking more than 20 min to execute. I have used package size while retrieving tha data but still taking same time to execute, Giving me the TIMEOUT error .
Provide some suggetions to use different types of SELECT quries that can be used to improve the performance.
Thanks & Regards,
BhanuHi ,
I am working as an abaper for Service Management module.
I need to show the prmise details inthe output of alv. Before that i need to get the meter reading details and need to do some calculations, by which i need to show idle one (Here only i need to hit a ZTABLE which is having more than 64 million records). For that idle premise user can select multiple pemises by using check boxes and can create notification by pressing a pushbutton 'CREATE IS NOTIFICATION' which exist on the application toolbar . So i can not run this report in background.
Thanks & regards,
Bhanu. -
Getting syntax error while executing keyfigure routine BI 7.0
Hello,
I am writing a very simple keyfigure routine to calculate sales revune using sales quantity and sales price, I am getting error as follows
- I am in 'Rules Details' screen and I have selected 'Routine' as the rule type. I enter the following code in routine
RESULT = SOURCE_FIELDS_RULE-/BIC/IO_VB_QU *
SOURCE_FIELDS_RULE-/BIC/IO_VB_PRC .
- I hit the check button on the routine page, it says no syntax errors
- Now I am back in the 'Rules Details' page and I hit the 'Check' button it gives me the following error
Rule(target IO_VB_REV, group: Standard Group): Syntax error in routine
Please tell me what is wrong. what should i checkHi Vaibhav,
Here are the details
- I am loading data from flatfile to an Infocube with 3 keyfigures: IO_VB_PRC (Sales Price) , IO_VB_QU (Sales Quantity), IO_VB_REV (Sales Revune). Getting values for IO_VB_QU and IO_Vb_PRC from flatfile and calculating for IO_VB_REV using routine
- I created Transformations, and under Rule Group: Standard Group box I see 'X' sign against 'IO_VB_REV' field, meaning not mapped to any datasource field
- In rules detail screen, I add two source fields of Rule , IO_VB_QU and IO_VB_PRC. I see IO_VB_REV already added under 'Target fields of Rule' section
- I then add the only following line to routine
RESULT = SOURCE_FIELDS_RULE-/BIC/IO_VB_QU * SOURCE_FIELDS_RULE-/BIC/IO_VB_PRC .
Clicking on check button it gives no syntax error message. I save and exit back to Rule Details page.
- I specify 'USD' as the Conversion Type and then click on check button it initially gives me 'Incorrect Input' written in an information message box and then error that Syntax error in routine
Let me know what is that I am missing
Thanks for helping -
Error while executing 'cloneDeployment() command in WLST
getting error in ‘cloneDeployments’ command ( please find below error details)
Syntax for the command,
wls:/offline> cloneDeployments( '/my_path/user_templates/domains/my_domain', 'sourceServer','destinationServer', 'false')
cloneDeployments('C:/Oracle/Middleware/user_projects/domains/soa_domain','Manage21','Manage31','false')
##cloneDeployments(r.'/C:\Oracle\Middleware\user_projects\domains\soa_domain','AdminServer','Manage42','false')
Error :
wls:/offline> cloneDeployments('C:/Oracle/Middleware/user_projects/domains/soa_domain','Manage21','Manage31','False')
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: cloneDeployments
when user r'./ option..
wls:/soa_domain/serverConfig> cloneDeployments(r.'/C:\Oracle\Middleware\user_projects\domains\soa_domain','Manage21','Manage31','false')
Traceback (innermost last):
(no code object) at line 0
File "<console>", line 1
cloneDeployments(r.'/C:\Oracle\Middleware\user_projects\domains\soa_doma
in','Manage21','Manage31','false')
^
SyntaxError: invalid syntax
Please reply if you know the solution.Do:
configToScript('YOU_WLS_DOMAIN_DIR','/export/third-party/etsbea/home/etsbea/tests/wlst/') -
Getting internal error while executing a query in Bex analyser
When I try to run the query which is on virtual cube with services ( its totals record virtual cube for BCS) I get the following error message (I can run other queries that I checked):
<internal error> Receiving from the BW server failed
BW server raised exception: SYSTEM_FAILURE
Do you want to see more information
When I click to see more information the message is
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Exception condition "INHERITED_ERROR" raised.
I have got some notes but its not helping me.
pls respond to this ASAP.
Thanks
Saleem.in my office also have the same error. The problem happen at one pc, another pc working in good condition
<internal error> receiving from bw server failed bw server raised exception. system failure. Do you want to see more information
error group:
RFC_ERROR_SYSTEM_FAILURE
connection closed without massage (CM_NODATA_RECEIVED)
can anyone have idea where i want to start looking. on -
Getting Runtime error while executing Query on Multiprovider
Hi ALL,
When i m executing a query on multiprovider it is giving me runtime error as:
*Error Reading the data of the infoprovider
An Exception with the type CX_SY_ARITHMATIC_OVERFLOW occured
overflow in the operation.*
I ran this query today morning also it ran successfully, now it is giving this error.
Please help me.
Thank you.
REDDYHi check
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/sapsys-000-compute_int_times_overflow-cx_sy_arithmetic_overflow-1704462
Thanks
Reddy -
Error while Executing stored procedure using ant
Hi,
I am trying to execute a stored procedure using ant ..
My build.xml is like this...
<project name="myproject" default="db.build">
<target name="db.build">
<sql driver="oracle.jdbc.driver.OracleDriver"
url="jdbc:oracle:thin:@idm.orademo.com:1521:orcl"
userid="test"
password="oracle11g"
print="yes"
classpath="E:\\ojdbc14.jar"
src="E:\\upg_9102BP07.sql" />
<!--
<classpath>
<pathelement path=""\\>
<\\classpath> -->
</target>
</project>
I have my stored procedure in upg_9102BP07.sql as shown in above src..
When im executing ant cmd I got the following exception
E:\>ant -f test.xml
Buildfile: test.xml
db.build:
*[sql] Executing resource: E:\upg_9102BP07.sql*
*[sql] Failed to execute: declare cnt int*
BUILD FAILED
E:\test.xml:12: java.sql.SQLException: ORA-06550: line 1, column 15:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
*:= . ( @ % ; not null range default character*
Total time: 44 seconds
I have no clue.. But this sql ran successfully when did manually..
Please help me in solving the issue...
-- MariasHere is my script bit lengthy...
Rem
Rem $Header: oim/server/Database/Oracle/Upgrade/Release91x/910x/List/9102_ddl_AddcolumnToRCE_Oracle.sql st_oim_devjain_bug-9003841/1 2009/10/09 02:24:19 devjain Exp $
Rem
Rem 9102_ddl_AddcolumnToRCE_Oracle.sql
Rem
Rem Copyright (c) 2009, Oracle and/or its affiliates. All rights reserved.
Rem
Rem NAME
Rem 9102_ddl_AddcolumnToRCE_Oracle.sql - <one-line expansion of the name>
Rem
Rem DESCRIPTION
Rem Create a new column 'RCE_DELETE' in RCE table
Rem
Rem MODIFIED (MM/DD/YY)
Rem blaksham 09/30/09 - Created
Rem
declare cnt int;
Begin
Select Count(1) into cnt From User_Tab_Columns Where TABLE_NAME='RCM' And COLUMN_NAME='RCM_DELETE';
IF cnt=0 Then
Begin
Execute Immediate 'ALTER TABLE RCM ADD RCM_DELETE VARCHAR2(1)';
End;
Else
DBMS_OUTPUT.PUT_LINE('Column already exists in the DB');
End IF;
End;
Rem
Rem $Header: oim/server/Database/Oracle/Upgrade/Release91x/910x/List/9102_dml_odf_source_name.sql st_oim_devjain_bug-9003841/1 2009/10/09 02:44:45 devjain Exp $
Rem
Rem 9103_dml_odf_source_name.sql
Rem
Rem Copyright (c) 2009, Oracle and/or its affiliates. All rights reserved.
Rem
Rem NAME
Rem 9103_dml_odf_source_name.sql - <one-line expansion of the name>
Rem
Rem DESCRIPTION
Rem <short description of component this file declares/defines>
Rem
Rem NOTES
Rem <other useful comments, qualifications, etc.>
Rem
Rem MODIFIED (MM/DD/YY)
Rem vpotukuc 09/17/09 - Bug8796435: Increase the size of odf_source-name
Rem vpotukuc 09/17/09 - Created
Rem
SET ECHO ON
SET FEEDBACK 1
SET NUMWIDTH 10
SET LINESIZE 80
SET TRIMSPOOL ON
SET TAB OFF
SET PAGESIZE 100
declare
collen NUMBER := 0;
begin
select char_length into collen from user_tab_columns where table_name = 'ODF' and column_name = 'ODF_SOURCE_NAME';
IF (collen < 400) then
execute immediate 'alter table ODF modify ODF_SOURCE_NAME varchar2(400)';
END IF;
END;
File name: 91_dml_update_reviewers_With_NoEmail_attestation.sql
Purpose: Modify the email template to replace the 'Delegated By Last Name' with 'Reviewer Last Name' and 'Delegated By User Id' to 'Reviewer User Id'.
Author: Babu Lakshamanaiah
Description: Modify the email template 'Attestation Reviewers With No E-mail Addresses Defined'
declare
cnt int;
begin
Select Count(1) into cnt From emd Where emd_name='Attestation Reviewers With No E-mail Addresses Defined' and emd_language='en' and emd_country='US';
IF cnt=0 Then
Begin
DBMS_OUTPUT.PUT_LINE('There is no record with emd_name Attestation Reviewers With No E-mail Addresses Defined ');
End;
Else
update emd set emd_body='The following attestation reviewers do not have email addresses defined. Attestation requests have been generated for these reviewers and can be accessed by loging in to Oracle Identity Manager. However, notification emails were not sent.' ||chr(10) || chr(10) ||
'Attestation process: <Attestation Definition.Process Name>' || chr(10) ||
'Attestation Request ID: request <Attestation Request.Request Id>' || chr(10) ||
'Request date: <Attestation Request.Request Creation Date>' || chr(10) || chr(10) ||
'Reviewers Without E-mail Address: <reviewers> ' || chr(10) ||
'<Attestation Task.Reviewer First Name> <Attestation Task.Reviewer Last Name> [<Attestation Task.Reviewer User Id>]' Where emd_name='Attestation Reviewers With No E-mail Addresses Defined' and emd_language='en' and emd_country='US';
End IF;
commit;
end;
Please help me out.....
--Marias -
Error while executing webservice composed using service composer
Hello Experts,
We have composed a service using service composer DC by consuming PI soap interfaces.(SAP NW 7.4 SP07)
Composed Webservice works perfectly fine for some time then it throws folowing error when tested from wsnavigator -
any idea what could be the problem??
Thanks in advance..
PriyaTry not changing the schema names when creating the web services. And if you are changing it, make sure you change it everywhere required.
This error is thrown when the server can't find a specified schema class.
But if you mention that the service works fine for some time and later crashes, makes the scene a little fishy.
Please log on to http://<hostname>:<portnumber>/nwa/logs immediately after this failure occurs and check the logs for a detailed error trace. -
Error While executing Set command
Hi All,
When I run the following command
SET -A LOOKUP_ALL "XX/CAE_MAILING_LIST_1017_TIME_ATN", it gives me error:
-bash: SET: command not found
Please let me know what to do.
Thanks
JDespite of what you are trying to accomplish, it seems the error is because you have "SET" uppercase, which produces exactly the same error.
# SET
-bash: SET: command not found
# set -A
-bash: set: -A: invalid option
set: usage: set [--abefhkmnptuvxBCHP] [-o option] [arg ...]Are you trying to define a variable?
the that should be like:
# export LOOKUP_ALL='XX/CAE_MAILING_LIST_1017_TIME_ATN'
(export to make the variable known to child sessions)or to define an alias for program or script execution with parameter:
#alias LOOKUP_ALL='XX CAE_MAILING_LIST_1017_TIME_ATN'Edited by: waldorfm on Oct 25, 2010 7:31 AM
Maybe you are looking for
-
My iphone wont show up in itunes when plugged into my laptop, help anyone?
when i plug my pihone into my laptop ( windows running on windows 8) it wont show up or connect into itunes, i can do the exaxt same thing with my ipod and it will connect and sync with my itunes library so i am confused to what the problem is. can a
-
I'm trying to add a new row to ADF table. Here are my steps: 1. Create new entities from tables (New -> EJB -> Entities from Tables) 2. Create Session Bean (New -> EJB -> Session Bean) with all requested methods for earlier created entity 3. Create D
-
ERROR WHILE CONNECTING COMPANIES TO SERVER IN VISTA CLIENTS
Hi All ! We upgraded one of our client to 2007A. Only 2 client machine are getting an error while trying to connect them to server. Connection Error. SQL state 08001. Error de SQL Server: 21. Microsoft SQL Native Client No se admite el cifrado del
-
Hi all, when i tried to define authentication profile and assign grouping in IMG..it gives out runtime error.. A RAISE statement in the program "SAPLHRBAS00INFOGET" raised the exception condition "NO_USERGROUP". Since the exception was not intercepte
-
I am using a macpro 12 core computer I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same