Getting error for classpath setting during compilation

Hi,
I tried sampel code of SchematronValidation bpel sample code from oracle site.But while compiling the code,I am getting following error:
Failed to compile bpel generated classes.
failure to compile the generated BPEL classes for BPEL process "SchematronValdiationProcess" of composite "default/SchematronValidation!1.0"
The class path setting is incorrect.
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
Plz help me on this to resolve!!!
Regards,
Deb
Edited by: DevD on Jun 30, 2011 2:40 PM

Hi Yatan,
Thanks for your inputs.
I have added BPM-Workflow class file in project properties.Now SOA-BUILD successful,but while deploying to server I am getting error:
Error during deployment: Deployment Failed: Error occurred during deployment of component: SchematronValdiationProcess to service engine: implementation.bpel, for composite: SchematronValidation: ORABPEL-01005
Failed to compile bpel generated classes.
failure to compile the generated BPEL classes for BPEL process "SchematronValdiationProcess" of composite "default/SchematronValidation!1.0*soa_1272dcc8-82cf-4306-b31f-7aacd0be61cb"
The class path setting is incorrect.
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
[05:10:15 PM] Check server log for more details.
[05:10:15 PM] Error deploying archive sca_SchematronValidation_rev1.0.jar to partition "default" on server soa_server1 [10.185.51.136:8001]
[05:10:15 PM] #### Deployment incomplete. ####
[05:10:15 PM] Error deploying archive file:/C:/JDeveloper/mywork/GM_POC/SchematronValidation/deploy/sca_SchematronValidation_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Plese help me on this!
Regards,
Deb

Similar Messages

  • Keep getting error message "registry setting used by itunes drivers for importing

    Keep getting error message "registry setting used by itunes drivers for importing and burning cds & dvds are missing", this can happen as a result of installing other cd burning software".  The only software on my computer is original cd-dvd on my hp portable with Vista.  My computer now recognized itouch as a camera. Ive uninstalled and reinstalled itunes, nothing changes.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • I would like to combine my word files to a pdf and i get errors for pdfmaker

    i would like to combine my word files to a pdf and i get errors for pdfmaker

    is it 32 bit or 64 bit. you can check it by following the steps mentioned below
    In the program in which you want to verify the version, click the Microsoft Office Button, and then click Program_Name Options.
    Click Resources, and then click About.
    To locate the About Microsoft Program_Name dialog box in programs that do not use the Ribbon user interface,  click About on the Help menu.
    Thanks,
    Vikrantt Singh

  • Getting Errors for not Connected to Internet

    Okay, so this happens with any program that I download that has to connect to a server, (Like Google Chrome), and Adobe.  Please help me.  I am really sad   When I try downloading anything it gives me an error saying please, have an internet connection.  I disable windows firewall, and no luck!  This happened before all my anti-virus!  Please help me!  I am going to cry   Please please please!  If you help me, I will be very very very happy!  I get errors for Im not connected to internet

    What Adobe product are you trying to download?  Where exactly are you receiving this error message?

  • Need an error for no keyFieldValue during File Content Conversion

    Hi Gurus,
    I am working on a scenario where I have to convert a CSV file structure.
    Each sender file is having "END" in the last so that the structure looks like as follows:
    I,103468,-No Entry-,299103468002,0.010,50.000,1.000,-49.990,None,,0,Diab
    S,3101,100.125,abc,abc
    END
    Now the requirement is, if file does not contain "END" in the last then PI should not pick this file.
    This is only possible if I make "END" as a Key Field and for "keyFieldValue" I assign value "END" with either end separator or field fixed length functions.
    But the default behaviour of PI is, even if I create key field value, if it is not available in the file, PI would ignore that record.
    I tried all possible combination in the following link:
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
    but for key field value it is clearly written that:
    "Specify the value of the key field for the structure. This entry is mandatory if the key field name is set. Otherwise, the entry is ignored."
    Is there any way by which I get error if "END" is not available?
    One of the alternatives which I see is to create OS level scripts and read the content. If I don't get "END" in the last then put the same file in a different, temporary directory. And once processing is done I pull it back to original directory
    Any suggestion on this would be highly appreciated.
    Thanks in advance.
    Vikash

    Dear Mickael,
    I tried putting "1" in the last and executed but it did not helped. File is executing successfully even if there is no END in the last.
    so the current behaviour is: whatever written or even blank in the last, if it is not "END", it is ignored. If I mention "END" in the last, it is always picked by FCC and inserted in the XML.
    Do you think some other way of proceeding?
    Thanks in advance.
    Regards,
    Vikash

  • Getting Error for Install of Prerequisite Components in 64 bit operating system

    we have generated our .exe file by adding prerequisite  in setup project and prerequisite (sql server 2005 Express
    sp2 (x86)) works for windows xp. But we are facing an issue while we install prerequisite (sql server 2005 Express sp2 (x86))  not working in windows 7 64 bit and 32  bit operating system. We have added prerequisite (sql server 2005 Express sp2 (x86))
    using visual studio 2010.While we install prerequisite (sql server 2005 Express sp2 (x86)) in windows 7 we getting error like " Prerequisite check for system component SQL Server 2005 Express Edition SP2 (x86) failed with the following error message:
    "This version of SQL Server 2005 Express Edition (x86) is not supported for the current processor architecture."
    See the setup log file located at 'C:\Users\BS-90\AppData\Local\Temp\VSDCFFC.tmp\install.log' for more information.
      ". We need only sql server 2005 express edition to be installed but not sql server 2008 express edition to be
    placed as prerequisite for our application because our .mdf file supports sql server 2005 express edition only.

    Hello Zhang,
                        As per your reply here is my summary  fallows as:
                       Microsoft SQL Server 2005 9.00.3042.00 
                       ============================== 
                       OS Version      : Professional Service Pack 1 (Build 7601) 
                       Time            : Mon Nov 10 14:55:46 2014 
                       BS-90-PC : The feature(s) specified are not valid for this edition of SQL Server.
     SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt. 
    Time            : Mon Nov 10 14:55:50 2014
    List of log files:
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_Core(Local).log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_Datastore.xml
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_.NET Framework 2.0.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_Support.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_Core.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_SCC.log
    And Detail Logs fallows as:
    The following properties have been set:
    Property: [AdminUser] = true {boolean}
    Property: [InstallMode] = HomeSite {string}
    Property: [ProcessorArchitecture] = AMD64 {string}
    Property: [VersionNT] = 6.1.1 {version}
    Running checks for package 'Windows Installer 3.1', phase BuildList
    The following properties have been set for package 'Windows Installer 3.1':
    Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
    Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
    Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
    'Windows Installer 3.1' RunCheck result: No Install Needed
    Running checks for package 'SQL Server 2005 Express Edition SP2 (x86)', phase BuildList
    Running external check with command 'C:\Users\BS-90\AppData\Local\Temp\VSDCFFC.tmp\SqlExpress\SqlExpressChk.exe' and parameters ''
    Process exited with code 1
    Setting value '1 {int}' for property 'SQLExpressInstalled'
    The following properties have been set for package 'SQL Server 2005 Express Edition SP2 (x86)':
    Property: [SQLExpressInstalled] = 1 {int}
    Running checks for command 'SqlExpress\sqlexpr32.exe'
    Result of running operator 'ValueEqualTo' on property 'SQLExpressInstalled' and value '0': false
    Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionNT' and value '5.1': true
    Result of checks for command 'SqlExpress\sqlexpr32.exe' is 'Bypass'
    Running checks for command 'SqlExpress\sqlexpr32.exe'
    Result of running operator 'ValueEqualTo' on property 'SQLExpressInstalled' and value '0': false
    Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.1': false
    Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
    Result of running operator 'ValueExists' on property 'Version9x': false
    Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
    Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel': true
    Result of checks for command 'SqlExpress\sqlexpr32.exe' is 'Fail'
    'SQL Server 2005 Express Edition SP2 (x86)' RunCheck result: Fail
    A prerequisite failed for Package "SQL Server 2005 Express Edition SP2 (x86)"
    Package failed with message "This version of SQL Server 2005 Express Edition (x86) is not supported for the current processor architecture."

  • Dashboard Prompt - Getting error for Adding SQL query in "Default to"

    Hello Oracle,
    I am facing some problem in Dashboard Prompt. Like when i add some sql query in "Default to" in Dashboard prompt and for the next prompt when i check for Contrain option i get error in the second prompt. but it works fine when i hard-code a value in "Default to" options.
    For Example:
    Like when we consider a two prompts :
    1) Year -> (In Default to i select SQL Query and enter the query as SELECT "YTD Dim"."Fiscal Year" FROM "YTD Report" WHERE "YTD Dim"."Fiscal Year" = Year(Current_Date)
    2) Business Unit -> (In specific value i give as some hard code value of Business Unit and check the contrain option)
    i get error as
    Business Unit
    Error Generating Drop Down Values
    A numeric value was expected (received "SELECT "YTD Dim"."Fiscal Year" FROM "YTD Report" WHERE "YTD Dim"."Fiscal Year" = Year(Current_Date)"). Error Details
    Error Codes: EHWH2A7E
    but i get correct value for Year as 2011.
    I need to use SQL query in default to option and need to check the constrain option too.
    Looking for positive feedback.

    You need to create a dashboard prompt and in Default To -> select SQL Results
    Click on the ... (three dots ) underneath it and put in your sql
    For Example , I have a Table called "Sales Date" in my "ABC" presentation folder. This has a column called "Year" and "Date". If I want to have a Year prompt with the default value set to current year, here is what the syntax of my sql result will be :-
    SELECT "ABC"."Sales Date".YEAR
    FROM "ABC"
    WHERE "Date" = current_date
    In SQL, we cannot put SQL as we know of in terms of Oracle, Sql Server etc. The SQL here refers to sql as OBIEE understands it and should be in the form of Select "Presentation foler"."Table Name".ColumnName from "Presentation Folder"
    Hope this helps

  • Getting error for input string 0000 #

    Hi ,
    I am getting error on the portal that has an exception as error occured for For input string: "0000  #" .I think its because of some problem with the RFC that m getting this error but please suggest.The code done with dynamic coding is given below:
    for(int j=0; j<intList; j++)
                                       IDynamicNodeElement dynObj = wdContext.createDynamicNodeElement();
                                       strLine = wdContext.nodeWeb_Table_Disp1_Out().getWeb_Table_Disp1_OutElementAt(j).getTline();
    intLine = strLine.length();
                                       strLine = strLine.substring(1,intLine-1);               
                                  String[] strArr = strLine.split("#");
                                       for(int k=0;k<intCat;k++)
    String strVal = strArr[k];
                                            if(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getDatatype().equalsIgnoreCase("DATE"))
                                                 try
                                                      String strdate ="";
                                                      SimpleDateFormat ch1 = new SimpleDateFormat("yyyyMMdd");
                                                      //wdThis.wdGetAPI().getComponent().getMessageManager().reportSuccess(wdContext.currentUser_ProfileElement().getDatefmt()+strVal);
                                                      String strFmt = "";
                                                      if("YYYY/MM/DD".equalsIgnoreCase(wdContext.currentUser_ProfileElement().getDatefmt()))
                                                           strFmt = "yyyy/MM/dd";
                                                      else
                                                           strFmt = "MM/dd/yyyy";
                                                      SimpleDateFormat ch2 = new SimpleDateFormat(strFmt);
                                                      strVal = strVal.trim();
                                                      if(!"".equals(strVal))
                                                           strdate = ch2.format(ch1.parse(strVal));     
                                                      }          dynObj.setAttributeValue(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getFieldname(),strdate);
                                                 catch(Exception e)
                                            else if(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getDatatype().equalsIgnoreCase("QUAN"))
                                                 Double dblVal = null;
                                                 DecimalFormat sdf = new DecimalFormat("#,###.####");
                                                 dblVal = new Double(strVal);
                                                 if(!strVal.matches("(?i).-."))
                                                      dblVal = new Double(strVal);
    dynObj.setAttributeValue(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getFieldname(),new BigDecimal(strVal.trim()));
                                                 else
                                                      dynObj.setAttributeValue(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getFieldname(),null);
                                            else
                                                 dynObj.setAttributeValue(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getFieldname(),strVal);
    col.add(dynObj);     
                             wdContext.nodeDynamicNode().bind(col);
    Please help.
    Thanks & Regards,
    Reinuka.

    I guess the reason for the exception is the "date format" and conversions. Try something like this.
    SimpleDateFormat sdf = new SimpleDateFormat("date format you want");
    java.util.Date asDate = sdf .parse(codes.getString("your date value").trim());
    node element to which you want to set the date value.setfieldname(asDate.getTime());
    Example:
    SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd");
    java.util.Date asDate = sdf .parse(codes.getString("DELIV_DATE").trim());
    outboundpr.setDel_date(asDate.getTime());

  • Getting error message when setting up CNAME & MX record. Help?

    When setting up a CNAME and MX for a 2nd site with a different email on that site, I am getting error message, "URL aready in system". Bothe 1st site and 2nd site have different emails but are both on same server. How can I fix this?

        LadySiren, hmm that's odd. Are we setting these trusted numbers up on My Verizon from the computer? Are we putting the full 10-digit mobile or landline numbers in the slots? How many numbers do you have saved in total for trusted numbers? Let me know if it is working out or if you have any other issues. I want to make sure we get this going for you ASAP.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Employee get booked for an event during absence in Training and event manag

    Hi ,
    I am having foloowing issue :
    I am able to book an employee for a period during which absence already created in system for the employee. I have checked all the settings at course type level in Course Type info infotype " Allowed in time off " is disabled.
    PLOGI TIME switch is active.
    Why its happening ?
    Thanks and best Regards
    Puneet

    Well Puneet,
    To just review all the steps, the followingsettings are required for integration iwth Time management - only sample settings are shown below
    T77S0
    PLOGI     TIME     1     Integration switch: Training and Event Mgmt/ Time
    T77S0
    SEMIN     AINST     0100     Attendance type for instructor in T554S
    SEMIN     APART     0101     Attendance Type for Attendance in T554S
    SEMIN     TIMEP     100     Minimum percentage attendance
    T77KA
    B     Event attendance     8     0800
    B     Event attendance     8     0900
    B     Event attendance     8     0901
    If we do all this, I have verified, that even if employee has one day absence during a course for more than 1 day, system does not allow me to book a training course when an absence already exists.
    If you are certain that the settings are all correct, then it looks as if there might be some kind of product bug in your system and it may be  required to raise an OSS message for the same. I cannot think of anything else that needs to be set up for this.

  • HT204150 Getting error message ("The set of folders cannot be opened") when clicking on "iCloud' folder in Outlook 2007. Lost contacts and calendar in outlook 2007 while installing icloud.

    Vista + Outlook 2007 + Icloud : Lost all contacts and calendar in outlook when installing/Synchronizing iCloud. Both still available on iphone and iCloud.
    How to get them back in Outlook? Understand iCloud erased them and transferred them in an other outlook account. In Outlook 2007, I can see a folder called "iCloud" but get an error message ("The set of folders cannot be opened...") when clicking on it. I suspect all is there, but no access possible. I assume some Outlook settings are uncorrect, but wonder which settings...?

    Well. Working just fine now, since uninstalling and re-installing icloud and syncing.

  • Getting error for bind variables

    Hello Experts ;
    SQL> DECLARE
      2  l_eid  number;
      3  l_name  varchar2(30);
      4  BEGIN
      5  l_eid:=1000;
      6  select name into l_name from tab1 where no = l_eid;
      7  l_eid:=9999;
      8  select name into l_name from tab1 where no = l_eid;
      9  l_eid:=299999;
    10  select name into l_name from tab1 where no = l_eid;
    11* END;
    PL/SQL procedure successfully completed.
    when  creating bind variables  i am getting error :
    SQL> variable b1 number;
    SQL> exec :b1 :='select name from tab1 where no = :b1';
    BEGIN :b1 :='select name from tab1 where no = :b1'; END;
    * ERROR at line 1:
    ORA-06502: PL/SQL: numeric or value error: character to number conversion error
    ORA-06512: at line 1

    @ SY
    SolomonYakobson wrote:
    You need to explain "method not workable for me". I have no idea what method you are talking about and what are you trying to achieve.
    SY.
    SQL>DECLARE
        v_value  number;
        v_dispaly varchar2(30);
        BEGIN
       v_value :=100000;
        select name into v_display from tab1 where no = :v_value;
        DBMS_OUTPUT.PUT_LINE(v_display);
        v_value :=20000;
        select name into v_display from tab1 where no = :v_value;
        DBMS_OUTPUT.PUT_LINE(v_display);
         v_value :=250000;
        select name into v_display from tab1 where no = :v_value;
        DBMS_OUTPUT.PUT_LINE(v_display);
      * END;
    RS>/
    PL/SQL procedure successfully completed.
    >>  This is not workable for me ,  Here getting error  >>
    SQL> DECLARE
      2  variable  b1  number;
      3  exec  :b1;
      4  BEGIN
      5  select  name  from  tab1  where no =: b1;
      6* END;
    RS>/
    variable b1 number;
    ERROR at line 2:
    ORA-06550: line 2, column 13:
    PLS-00103: Encountered the symbol "NUMBER" when expecting one of the following:
    := . ( @ % ; not null range default character
    Thanks !

  • Getting error for using alias

    Hi,
    am using database version
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    and when I run below command,
    select e.empname from emp as e;
    am getting error
    ORA-00933 SQL Command not properly ended,
    but this is allowed right? I mean we can give alias name by using as or whitespace,
    Can any one please comment on this,
    Thanks,

    NSK2KSN wrote:
    Hi,
    am using database version
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    and when I run below command,
    select e.empname from emp as e;
    am getting error
    ORA-00933 SQL Command not properly ended,
    but this is allowed right? I mean we can give alias name by using as or whitespace,
    Can any one please comment on this,
    Thanks,Column aliases can use the optional "as" keyword.
    Table aliases must not use the "as" keyword.
    select e.empname from emp e;

  • AJRW getting error for fiscal year 2015

    Hi Expert, while doing AJRW getting error
    see the screen shot below.
    Kind regards
    Pranav Kr. Gupta

    Hi Pranav,
    In AJRW transaction please check the "Error Log" what is exactly it is mentioned over it.
    Plus I would also suggest to execute Transaction OAAQ & OAAR to check the Years that are closed.
    Also execute AJAB T. code in Production Run first and then execute AJRW.
    Thanks.
    BR, Jaymin

  • HT1386 directory (harddrive) into my IPOD Touch 4.   I get an unknown reason -50 error for their names during syncing attempts.  1 album is greyed names on my IPOD. What can I do?

    I bought some mp3 music files from Amazon that will not sync from the Itunes directory onto my IPOD Touch 4.  What can I do to get them to sync?  I am getting a -50 unknown reason error message when the system tries certain songs.  I also bought a whole album from Amazon in mp3s that downloaded to my Itunes directory, yet only shows up as greyed out on my IPOD.  What can I do?  Most of the rest of my songs have synced with the IPOD.  I called Amazon's help line but they say I have to call Apple's help line, and it is just past the end of my year's service.  I wondered if it was due to the new Amazon cloud software, but they claim it isn't since the songs play on my hard drive.  I'd appreciate any suggestions.

    Thanks for the information.  I actually fixed my problem after many hours of experimentation in two different ways.
    I found that when I filled in more information in the catalog about songs on mixture albums, I had to always check the COMPILATION box to have those songs sync correctly. Apple didn't say anything about that. Without the checkmark on each song in the compilation album, the song would cause a 50 error.
    I also found that if I moved the problem songs (that caused the error 50 message) out of my Itunes Library and reimported them, that stopped them from causing the error 50.  So I deleted them and reimported them into the library.  I found that some of the songs in the Itunes catalog had showed weird locations with addresses like C:\\\documents and settings...instead of the real pathway that might have been C:\documents and settings..  Some pathway addresses had become corrupted for some reason in the information that my Itunes library stored.  So when I reimported them into the ITunes library from another location, their pathways were fixed and they no longer caused the 50 error while syncing.  I painstakingly identified each song that was failing and deleted each specific song to clear up the problems.
    That said, I do appreciate this board and the fact that others are willing to take time to help other users.  Much obliged.

Maybe you are looking for