Getting error when trying to deploy the SQL project after making some changes

I’m getting the below error message, when I’m trying to deploy the project by making some changes.
In detail, The project was deployed successfully at first time. Later I did some changes(Added 1 more table) and I tried to deploy, but it was not sucess. I'm getting the below error message
Error message:Cannot upgrade the DAC for database CTR_FIN_FINNOTE_DB because the compatibility level is 70 or lower. Alter the database to support a compatibility level of 80 or higher
I checked in SQL, the compatibility level is 110 which is higher than 70.
Can any one help me out to overcome with this.
Regards
Sk.

Try to uninstall you application and then deploy again with the new changes.
jdweng

Similar Messages

I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?

Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao.

Getting error when tried to learn the documents in OFR Designer

Hi All,
As per project requirements, I have to create Classification and Verification LearnSets in Oracle Form Recognition Designer depending on three Invoice Types-- PO,Non-PO and Pre-Approved.
First I created three derived classes under Generic Class -- PO,Non-PO and Pre-Approved.
I can add documents in Classification and Extraction LearnSet, analyze them, but getting error when click on the Learn button, I couldn't make the engine ready in learned state from the Definition Mode.
Always getting the below two errors:-
1) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
Cannot learn the BrainwareView : DefaultView
SERbrainware : Learn, learning error (7)
2) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
Cannot create Brainware Dictionary for BrainwareView : DefaultView
SERbrainware : Create/AppendDictionary, preprocessing error (3)
Thanks in advance,
Moumi.

Hi All,
The below mentioned error were resolved after adding documents in Void Class.
Thanks,
Moumi.
Edited by: 903667 on Jan 31, 2013 8:34 PM

Getting Error when trying to deploy Portlet Application on WebLogic Server

Hi,
We have a WebLogic server installed on a Windows machine. We created a new Domain, extended it with ADF Runtime and with Web Center Framework. It created three servers for us along with the already existing AdminServer, WLS_Portlet, WLS_Spaces, WLS_Service.
We created a portlet Application on our development machine using JDeveloper. When we run it from JDeveloper it runs as expected without any errors.
We created a Deployment profile for the application as an EAR file. Then we copied this EAR file over to the machine on which WebLogic server is installed (deployment machine).
On the Deployments screen of the WebLogic Server Console, we selected "Install", selected the EAR file we had created above, selected "Install as Application" and then selected the WLS_Portlet server on which to install it. Then we just kept clicking Next and Finish.
The first time we tried it, we got a NoClassDefFound exception for some class like JAXRPCServer. We did some research and found that to fix this issue we can put the containing .jar files of the classes not found into the public_html\WEB-INF\lib folder. We tried this for the above error by placing "wsserver.jar" file into the lib folder. Then we got anothe NoClassDefFound error. We again searched for the containing .jar file and put it into the lib folder. This continued for around ten to twenty errors and now we are stuck at a point where we are not able to find a way out.
The current error that we are getting is NoClassDefFound: oracle/security/jps/internal/policystore/GranteeFactory. We searched for the containing jar of this class and found it to be jps-internal.jar which is already present in our lib folder. The stack trace of the exception is:
<Jul 2, 2010 11:23:13 AM GMT+05:30> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: oracle/security/jps/internal/policystore/GranteeFactory
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1516)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1269)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NoClassDefFoundError: oracle/security/jps/internal/policystore/GranteeFactory
at oracle.security.jps.internal.policystore.JavaPolicyProvider.getPermissions(JavaPolicyProvider.java:216)
at java.security.Policy.initPolicy(Policy.java:299)
at java.security.Policy.setPolicy(Policy.java:243)
at oracle.security.jps.internal.jaas.JaasUtil.setPolicyProvider(JaasUtil.java:54)
at oracle.security.jps.wls.JpsWeblogicFilter.<clinit>(JpsWeblogicFilter.java:47)
at oracle.security.jps.wls.JpsWlsPlatformFactory.getJpsFilter(JpsWlsPlatformFactory.java:87)
at oracle.security.jps.ee.http.JpsFilter.<init>(JpsFilter.java:59)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.servlet.internal.WebComponentContributor.getNewInstance(WebComponentContributor.java:225)
at weblogic.servlet.internal.WebComponentContributor.createFilterInstance(WebComponentContributor.java:257)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:94)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:59)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1867)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
Any help would be appreciated on this since we are stuck at this point and have no idea to get across this hurdle.
One more thing, this is the first time that we are trying to play with WebLogic or even Java. So, some of our questions or steps performed might seem irrelevant here.
Thanks,
Gaurav

Hi,
Another update on this issue.
To remove the error that we were getting (java.lang.LinkageError: Class javax/xml/transform/Source violates loader constraints), we tried some searching around and found out that the way to fix it is to provide correct versions of xalan.jar, xml-apis.jar and xercesImpl.jar. We downloaded the required version from the apache site and added it to our WEB-INF/lib folder in the WAR file.
Now, we are getting this error:
XPathFactory#newInstance() failed to create an XPathFactory for the default object model: http://java.sun.com/jaxp/xpath/dom with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: No XPathFctory implementation found for the object model: http://java.sun.com/jaxp/xpath/dom
What else we might be missing in our libs or do we need to check some other configurations?
Any help on this would be much appreciated.
Thanks,
Gaurav

Getting error when trying to expose the java class as webservice

I am new to webservices and ESB.
I have two custom schemas. LegacyCustomer.xsd and CommonCustomer.xsd. I am compiling these schemas using JAXP. I am trying to map one custom data to another data using java class. I am trying to expose this java class into webservice.
public class Test implements Serializable {
private static final long serialVersionUID = 1L;
public Test() {
public CustomerType transform (CustomerDataType custDataType) {
CustomerType custType = new CustomerType();
custType.setCustomerId(custDataType.getCustomerId());
return custType;
Schemas used are:
Input Schema:
<schema targetNamespace="http://xmlns.oracle.com/Esb/CustomerData" xmlns:cust="http://xmlns.oracle.com/Esb/CustomerData" xmlns="http://www.w3.org/2001/XMLSchema">
     <element name="CustomerData" type="cust:CustomerDataType"/>
     <complexType name="CustomerDataType">
          <sequence>
               <element name="CustomerId" type="string"/>
</sequence>
     </complexType>
</schema>
Output Schema:
<schema targetNamespace="http://xmlns.oracle.com/Esb/CustomerProvision" xmlns:CU="http://xmlns.oracle.com/Esb/CustomerProvision" xmlns="http://www.w3.org/2001/XMLSchema">
     <element name="Customer" type="CU:CustomerType"/>
     <complexType name="CustomerType">
          <sequence>
               <element name="CustomerId" type="string"/>
          </sequence>
     </complexType>
</schema>
When I try to do this I am getting following error
CustomerType of method transform cannot be serialized into xml, and no custom serializer has been defined for it.
Why do we need custom serializer here? And if this is mandatory how can we define this custom serializer?

Thanks for your reply...
I tried second option that you specified first. I did the transformation of objects using xslt. It is working fine.
But I couldn't able to do this using first method...,
When I tried to compile the schema using jaxp it is actually creating classes without the private variables. and hence it is not able to recognize those variables to generate the wsdl.
But I am not sure how to generate the classes with those private variables and getter and setters (to generate wsdl specification it seems to be mandatory one).
Can you please tell me how can we do the schema compilation (other than xml beans and jaxp.... I tried both)?

Getting bad host error when trying to deploy simple web sample application

hi,
Can someone tell me why I'm getting this error when trying to deploy the simple web application from samples
This is what it said:
deploy_common:
[echo] Deploying ../assemble/war/webapps-simple.war.
[exec] java.net.MalformedURLException: Bad host: station_1
thanks

Hi,
Another update on this issue.
To remove the error that we were getting (java.lang.LinkageError: Class javax/xml/transform/Source violates loader constraints), we tried some searching around and found out that the way to fix it is to provide correct versions of xalan.jar, xml-apis.jar and xercesImpl.jar. We downloaded the required version from the apache site and added it to our WEB-INF/lib folder in the WAR file.
Now, we are getting this error:
XPathFactory#newInstance() failed to create an XPathFactory for the default object model: http://java.sun.com/jaxp/xpath/dom with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: No XPathFctory implementation found for the object model: http://java.sun.com/jaxp/xpath/dom
What else we might be missing in our libs or do we need to check some other configurations?
Any help on this would be much appreciated.
Thanks,
Gaurav

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

The application Install.app can't be opened. -1712

Always getting a server error when trying to download the products

I' always getting a server error when trying to download the products since yesterday, what can I do ?

Try using a different browser

HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

I get the following error when trying to use the itunes store "your apple id has been disabled"

I get the following error when trying to use the itunes store "your apple id has been disabled". My account was disabled when someone else had been using it without my knowledge. I changed my apple id password and the apple id is still fine, but itunes has it disabled. I verified that the computer is authorized for this apple id. What to do now?

Welcome to the Apple Community.
Contact Apple through iTunes Store Support

Error when trying to deploy Async Binary Update Sample

Hi,
I have installed WLI 8.5 in linux machine,
When trying to deploy the AsyncBinaryUpdate sample provided at http://edocs.bea.com/wli/download_samples/index.html), i
get error.
I am following as per the instructions in the readme of the sample. I am able to successfully create domain and build the sample but Error occurs at the step of deployment of sample ie when the cmd 'ant deploy' is done.
Error message is given below . Any help on this will be appreciated.
create_jmsqs:
[java] Connecting ....
[java] Connecting to weblogic server instance running at t3://localhost:7001 as username weblogic ...
[java] Successfully connected to Admin Server 'cgServer' that belongs to domain 'acmeintg'.
[java] Traceback (innermost last):
[java] File "genqueues.py", line 199, in ?
[java] File "genqueues.py", line 179, in main
[java] IndexError: index out of range: 0
[java] Server ==
BUILD FAILED
file:/home/appadurai/WLI_Samples/AsyncBinSample/scripts/build.xml:158: Java returned: -1

Hi,
I have installed WLI 8.5 in linux machine,
When trying to deploy the AsyncBinaryUpdate sample provided at http://edocs.bea.com/wli/download_samples/index.html), i
get error.
I am following as per the instructions in the readme of the sample. I am able to successfully create domain and build the sample but Error occurs at the step of deployment of sample ie when the cmd 'ant deploy' is done.
Error message is given below . Any help on this will be appreciated.
create_jmsqs:
[java] Connecting ....
[java] Connecting to weblogic server instance running at t3://localhost:7001 as username weblogic ...
[java] Successfully connected to Admin Server 'cgServer' that belongs to domain 'acmeintg'.
[java] Traceback (innermost last):
[java] File "genqueues.py", line 199, in ?
[java] File "genqueues.py", line 179, in main
[java] IndexError: index out of range: 0
[java] Server ==
BUILD FAILED
file:/home/appadurai/WLI_Samples/AsyncBinSample/scripts/build.xml:158: Java returned: -1

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

Getting error when trying to deploy the SQL project after making some changes

Similar Messages

Maybe you are looking for