Getting error while connecting Sharepoint WFE to another Sql Server 2008

Hello All,
I am trying to connect a sharepoint wfe to another Sql server 2008 and getting error. This is what I am trying to do.
#Disconnecting present database serer
Disconnect-SPConfigurationDatabase
#Connecting to another database server
Connect-SPConfigurationDatabase -DatabaseServer "ServerName" -DatabaseName "SharePoint_Config_nameabcd" -Passphrase $SecuredPassphrase
Getteing below error
Connect-SPConfigurationDatabase : Cannot open database "SharePoint_Config_nameabcd" requested by the login. The login failed.
Login failed for user 'domain\username'.
At line:1 char:32
+ Connect-SPConfigurationDatabase <<<< -DatabaseServer "ServerName" -Database
Name "SharePoint_Config_nameabcd" -Passphrase $SecuredPassphrase + CategoryInfo : InvalidData:(Microsoft.Share... urationDatabase:SPCmdletConnectSPConfigurationDatabase) [Connect-SPConfigurationDatabase], SqlException+ FullyQualifiedErrorId
: Microsoft.SharePoint.PowerShell.SPCmdletConnectS PConfigurationDatabaffsadss FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletConnectS PConfigurationDatabase
Please advise to resolve the error.

Hi,
We have not heard from you in a couple of days.
Just checking in to see if the information was helpful. Whether your issue is solved.
Have a great day!
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Getting error while installing reporting servcies on existing sql server 2012.

Hi Expaerts,
sql 2012 sp1:
getting error while installing Reporting services on existing sql server. at final step
Error on scren: install_rsharepoint_cpu64_action : roll back , rolling back action.
error on popup windows: ' one or more files required to restore your computer to its previous state colud not be found. restoration will not be found.
Thanks in advance.

Hello,
Please help to collect the useful log information while install SQL Server Reporting Services. Here is the article for your reference, please see:
Navigating the Setup Logs when you install SQL Server 2012 Reporting Services:
http://blogs.msdn.com/b/jtarquino/archive/2012/03/14/navigating-the-setup-logs-when-you-install-sql-server-2012-reporting-services.aspx
Regards,
Elvis Long
TechNet Community Support

Error while changing immediate_sync to false in sql server 2008 R2

Facing issue while disabling the immediate_sync in sql server 2008R2
Below the query which i ran to find out the publication and immediate sync status
select immediate_sync,publication from distribution.dbo.MSpublications
1 MPI_SIM
select immediate_sync, name from syspublications
1 MPI_SIM
But while disabling the immediate sync by the below error i am facing this issue.
EXEC sp_changepublication
@publication = 'MPI_SIM',
@property = 'immediate_sync',
@value = 'false'
GO
Msg 20026, Level 11, State 1, Procedure sp_MSrepl_changepublication, Line 222
The publication 'MPI_SIM' does not exist.
Kindly help me out.
Thanks in Advance.

Have a look at this link, please:
How
do you set immediate sync to false to an Oracle Publication?
sqldevelop.wordpress.com

Getting error while connecting to DB in PL/SQL developer.

Hi Experts,
I am able to connect to the DB in TOAD ,
but I am not able to connect to the DB in PL/SQL developer.
PL/SQL developer
Version 8.0.1.1498
01.61091 - Unlimited user license
Windows 7 6.1 Build 7601 (Service Pack 1)
Oracle 11g
I am getting the below error
ORA-12154: TNS could not resolve the connect identifier specified.
Please help me why I am able to connect in TOAD
not able to connect in PL/SQL developer.
Thanks in advance.

973205 wrote:
Hi Experts,
I am able to connect to the DB in TOAD ,
but I am not able to connect to the DB in PL/SQL developer.
PL/SQL developer
Version 8.0.1.1498
01.61091 - Unlimited user license
Windows 7 6.1 Build 7601 (Service Pack 1)
Oracle 11g
I am getting the below error
ORA-12154: TNS could not resolve the connect identifier specified.
Please help me why I am able to connect in TOAD
not able to connect in PL/SQL developer.
Thanks in advance.Also note that PL/SQL Developer is not an Oracle product, so this is not the place to ask for support for that product. You should go to the vendors website (http://www.allroundautomations.com/plsqldev.html)

I am getting error while connecting to sqlplus by using apps account in 11i

i am getting error while connecting to sqlplus by using apps account in 11i. Does anyone has similar error.
[applmgr@appsc05t01 admin]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 14:34:52 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Rao

yes.
login as: gorantla
[email protected]'s password:
Last login: Mon Sep 13 14:39:23 2010 from glng3wy9g1.actuant.pri
[gorantla@appsc05t01 ~]$ sudo su - applmgr
[applmgr@appsc05t01 ~]$ ora_setup
Available databases:
x = ATUXX
y = ATUYY
z = ATUZZ
Select database: \c
y
ORACLE_SID=ATUYY
IAS_ORACLE_HOME=/apps/ATUYY/atuyyora/iAS
ORACLE_HOME=/apps/ATUYY/atuyyora/8.0.6
APPL_TOP=/apps/ATUYY/atuyyappl
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$ tnsping ATUYY
TNS Ping Utility for Linux: Version 8.0.6.3.0 - Production on 13-SEP-2010 15:42:32
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=dbrac05t01-vip.actuant.pri)(PORT=1611))
OK (0 msec)
[applmgr@appsc05t01 ~]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 15:42:40 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Rao

Error while converting schema from oracle to SQL server

Hello,
I am getting following error while converting schema from oracle to SQL server using SSMA.
I get Errors 1-3 while migrating procedures and error 4 while migrating a table.
1- O2SS0050: Conversion of identifier 'SYSDATE' is not supported.
2- O2SS0050: Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.
3- O2SS0050: Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported.
4- O2SS0486: <Primary key name> constraint is disabled in Oracle and cannot be converted because SQL Server does not support disabling of primary or unique constraint.
Please suggest.
Thanks.

The exact statement in oracle side which causing this error (O2SS0050:
Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.) is below:
dStartDate:= to_date(sStartDate,'MON-YYYY');
Statement causing error O2SS0050:
Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported is below.
nCount2:= length(regexp_replace(sDataRow,'[^,]'));
So there is no statement which is using to_date(VARCHAR2,
CHAR) and regexp_replace(VARCHAR2, CHAR) in as such. 'MON-YYYY' and '[^,]'
are CHAR values hence SSMA is unable to convert it from varchar2 to char.
Regarding SYSDATE issue, you mean to put below code in target(SQL) side in SSMA ?
dDate date := sysdate;
Thanks.

Getting error while connecting Utility Customer E-Services

I am getting the following error while connecting to Utility Customer E-Services through the browser.
Error: Your user master has not been created correctly. Contact your system administrator.
Please advise some fix for this problem.
Thanks in advance.
Regards,
Nitin

Hi Mattia,
yes, I had resolved this problem. It requires some configuration in ume database of the WebAS, where UCES application is hosted.
1) Create a user in ume.
2) Assign group "Everyone" and "Authenticated Users" to the user
3) Within Customized Information tab, create the mapping between your web user, reference user and business partner.
fscm_refuser: Use reference user id. ( user id to login to ISU system )
objtype_0: BUS1006
objkey_0: User business partner details ( business partner number in ISU)
If there is no customized Information tab, then open visual administrator and do the following.
1) Navigate to Services->Configuration Adapter
2) Click on Runtime tab -> Display configuration
3) Navigate to cluster_data -> server -> cfg -> services -> Propertysheet com.sap.security.core.ume.service
4) Add the following in ume.admin.addattrs.
com.sap.security.core.user.refuser:fscm_refuser;com.sap.security.core.user.references:objtype_0;com.sap.security.core.user.references:objkey_0;com.sap.security.core.user.references:objtype_1;com.sap.security.core.user.references:objkey_1;com.sap.security.core.user.references:objtype_2;com.sap.security.core.user.references:objkey_2;com.sap.security.core.user.references:objtype_3;com.sap.security.core.user.references:objkey_3;com.sap.security.core.user.references:objtype_4;com.sap.security.core.user.references:objkey_4;com.sap.security.core.user.references:objtype_5;com.sap.security.core.user.references:objkey_5;com.sap.security.core.user.references:objtype_6;com.sap.security.core.user.references:objkey_6;com.sap.security.core.user.references:objtype_7;com.sap.security.core.user.references:objkey_7;com.sap.security.core.user.references:objtype_8;com.sap.security.core.user.references:objkey_8;com.sap.security.core.user.references:objtype_9;com.sap.security.core.user.references:objkey_9;com.sap.security.core.useces:objtype_10;com.sap.security.core.user.references:objkey_10;com.sap.security.core.user.references:objtype_11;com.sap.security.core.user.references:objkey_11;com.sap.security.core.user.references:objtype_12;com.sap.security.core.user.references:objkey_12;com.sap.security.core.user.references:objtype_13;com.sap.security.core.user.references:objkey_13;com.sap.security.core.user.references:objtype_14;com.sap.security.core.user.references:objkey_14;com.sap.security.core.user.references:objtype_15;com.sap.security.core.user.references:objkey_15;com.sap.security.core.user.references:objtype_16;com.sap.security.core.user.references:objkey_16;com.sap.security.core.user.references:objtype_17;com.sap.security.core.user.references:objkey_17;com.sap.security.core.user.references:objtype_18;com.sap.security.core.user.references:objkey_18;com.sap.security.core.user.references:objtype_19;com.sap.security.core.user.references:objkey_19;
5) Save the changes, exit visual administrator and restart the server.
Now. your application will work perfectly fine.

Getting error while posting reports on Unix Process Scheduler Server

Hello ,
I am getting the below error while posting reports on Unix Process Scheduler Server .
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) HTTP transfer error.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) Post Report Elapsed Time: 0.0900
PSDSTSRV.14171 (10) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
Please advise ,thank you.

user5838027 wrote:
Node name :PS_HTTP
URL: http://ddas1020.dev.com:16000/psreports/hrdmo
URI:SchedulerTransfer/hr90dmo
URI Port: 16000
Please let me know if any other info is needed.
Thanks.
typo...
URL: http://ddas1020.dev.com:16000/psreports/hr90dmo
Hopefully, your application URL looks like http://ddas1020.dev.com:16000/psp/hr90dmo/..., your URI host looks like ddas1020.dev.com (or corresponding ip address), and hhtp is checked.
Did you also tried to give the web login/password ?
Nicolas.

Error during database connection to the database : MS SQL Server 2008 R2

Hi All,
I am working with ABAP Proxy to Rec JDBC( Integrating XI with MS SQL Server 2008 R2). I am using SAP PI 7.0
I am getting error in RWB at communication channel monitoring :
Error during database connection to the database URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST': SAPClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver'
I have given Connection details at Rec JDBC Communication channel as :
JDBC Driver as : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST.
Please help me in this regard. I really appreciate your valuable information and time.
Thanks and Regards,
Ayub.
Edited by: Ayubsajjid on Feb 15, 2012 8:49 AM

Hi All,
Thanks for all your valuable inputs on my question...
As per all your inputs, we have to install/Deploy the below required jar files in the aii_af_jmsproviderlib.sda file
ojdbc14.jar
msbase.jar
mssqlserver.jar
msutil.jar
Can you please tell me from where we will exact this .jar file, bcoz we have search lotzz but we helpless.
We install from this link http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21599--> we download sqljdbc_3.0.1301.101_enu file >sqljdbc_3.0>enu-->in that I find sqljdbc.jar and sqljdbc4.jar files only . I cant above said .jar files.
Please help me.
Regards,
Ayub.

ODBC Error connecting to a stored procedure SQL Server 2008 - Crystal 8.5

I am running a local copy of SQL server 2008 and get an ODBC error when connecting to any stored procedure with or without parameter. The database are running in SQL Server 2000 compatibility mode on the local server.
Do not get the error when connecting to one or more databse tables or when connecting to a stored procedure on a remote database.
The error reported is "ODBC error:[Microsoft][ODBC SQL Server driver] Syntax error or access violation"
I am running Vista OS.
Any help would be appreciated..

Hello,
Interesting combination. All but CR 8.5 is supported on that OS.
When you created your DSN did you using the 2008 Client or MDAC?
I suggest you go back to supported platforms for CR 8.5
If not then start debugging Vista permissions to start with...
good luck
Don

SMS_SRS_REPORTING_POINT - Error retrieving folders with SCCM 2012 and SQL Server 2008 R2 SP2

Hi:
According to all the Reporting Services logs my Reporting Point was setup correctly. When I try and run any report I see the entries below in the srsrp.log on the SQL Server. The report names show up in the Console but when I right any of the
listed reports I get errors and no report runs.
I am running SQL Server 2008 R2 SP2 on a remote server. SQL is installed on its own server. There is no firewall between the Configuration Manager server and SQL Server.
Thanks.
Mark
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:15:07 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
SRSRP registry key change notification triggered.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:17:40 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)

Hi:
Windows Firewall is off on both systems.
I can ping the Configuration Manager server from the SQL Server by netbios name, ip address and fully qualified domain name.   I can ping the SQL Server from the Configuration Manager server by netbios name, ip address and fully qualified domain
name.
I have uninstalled and installed the Reporting Point Service a couple of times and everything looks fine according to the logs after the install finishes but these errors only appear each time I try and Run a report.
Mark

Crystal Reports XI connection problems - after updating to SQL Server 2008

Hello!
We have some ASP.NET 2.0 Applications that call some CR XI report files with parameters to generate PDF Files. After upgrading from SQL Server 2005 to 2008 the apps hang when trying to generate the PDFs. Some research with Fiddler showed that ever time a 401 Error is raised. Calling the reports directly from CR Designer with the same connection values and Parameter shows the appropriate data that means the log-in data iare functioning.
I already tried switching the data source driver from OLE DB to SQL Native - no effect!
Can it be that CR XI does not work with SQL Server 2008? Or is there an update for CR XI and SQL Server 2008?
Because we are in a hurry I hope somebody can solve my problem(s) ...?!
Thanks in advance,
Frank

Hi Frank,
No CR XI is not supported nor is any version completely at this time. What we've found issues in so far are the Time(7) time is returned as a string value and Stored Procedure Data/time parameter SQL creation. The Time(7) field is an OLE DB driver issue with Microsoft but the Date/time SP issue is our issue and it's currently tracked and escalated. It will be fixed for CR 2008 with SP3 I believe. And I've asked that the same fix be rolled back to CR XI R2 but waiting on the reply from R&D if it can be done.
What you need to do is download the trial version of CR XI R2 ( Release 2 ) and then use your XI Keycode to install it and it will work. Then update to the latest SP 5 Service Pack. XI is past it's end of life support which means there will be no updates or bug fixes any more.
Next, MS SQL Server 2008 does not work with the MDAC version of the Native drivers, you must install the MS SQL Server Client. You'll see the driver name is "MS SQL Server Native client 10". This is the one you need to use.
Another work around is to use ODBC, it seems to resolve all issues, but the client must be installed.
Thank you
Don

HSODBC connectivity between ORACLE 10g and SQL Server 2008 R2

Hi,
I'm getting below error when using the DB link between Oracle (10.2.0.2 which is on Sun Sparc) and MS Sql server 2008 R2.
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source
name not found and no default driver specified (SQL State: IM002; SQL Code: 0)
ORA-02063: preceding 2 lines from SCOPEX.WORLD
My Config files:
On Sun Sparc 5.9 where Oracle server is running.
TelemetryDB1 =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(CONNECT_DATA=(SID=TelemetryDB1))
(HS=OK)
Listener.ora file on Windows machine:
TelemetryDB1 =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
SID_LIST_TelemetryDB1 =
(SID_LIST=
(SID_DESC=
(SID_NAME=TelemetryDB1)
(ORACLE_HOME=C:\oracle\product\10.2.0\db_1)
(PROGRAM=hsodbc)
Tnsnames.ora file:
TelemetryDB1 =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(CONNECT_DATA=(SID=TelemetryDB1))
(HS=OK)
initTelemetryDB1.ora file under ORACLE_HOME\hs\admin\
HS_FDS_CONNECT_INFO = TelemetryDB1
HS_FDS_TRACE_LEVEL = OFF
We have created DNS with TelemetryDB1.
I'm getting the above error for DB links between Oracle 10.2 and SQL Server 2008 R2. But the same, when configured for MS SQL server 2000 works fine without any issues.
Please advise me to rectify the error. We've been working for the last couple of weeks.
Regards,
Sunil

Sunil,
You don't need an Oracle ODBC driver.
The way it works is that in the gateway init<sid>.ora file, in your case initTelemetryDB1.ora, the parameter HS_FDS_CONNECT_INFO points to a system DSN. This DSN should then be configured to use an ODBC driver to connect to the non-Oracle database. So, in your setup when you want to access the SQL*Server 2008 database then the DSN should use an ODBC driver that can connect to a SQL*Server 2008 database. If you still use the initTelemetryDB1.ora file for the connection then the TelemetryDB1 DSN should be configured to access the SQL*Server 2008 database.
However, there are a couple of problems with your actual setup -
- the configuration you have - 10.2 RDBMS on a Sun machine and HSODBC on Windows - is not supported. HSODBC should only be used from a RDBMS that is in the same ORACLE_HOME as HSODBC.
- 10.2 HSODBC is now desupported and has been replaced by the 11g Database Gateway for ODBC (DG4ODBC) and the configuration you want is supported. That is because unlike HSODBC the DG4ODBC gateway can be installed standalone with a RDBMS being installed.
I recommend that you download and install 11.20.2 DG4ODBC on your Windows machine in a new Oracle_home and access that from the 10.2 RDBMS on Sun - which is a supported configuration. But to do this, you will need to apply either the 10.2.0.4 or 10.2.0.5 patchset to your RDBMS.
There is more information in the following note available on My Oracle Support (MOS) -
Note.1083703.1 Master Note for Oracle Gateway Products
The 11.2.0.2 DG4ODBC can be downloaded from MOS as patch and for the gateways on Windows 32-bit you just need to download -
p10098816_112020_platform_4of6.zip
However, to check the HSODBC ou need to confirm that the DSN used by HSODBC points to a System DSN configured to access SQL*Server 2008.
Have a look at -
Note 109730.1 How to setup generic connectivity (HSODBC) for Windows NT
But remember this is not a supported version or configuration and you should be using Dg4ODBC.
Regards,
Mike

Best way to migrate SharePoint 2003 data into SQL Server 2008

Hi Experts,
I am planning to migrate data from SharePoint 2003 into SQL Server 2008. After the migration SharePoint site will be deleted in couple of months and then that data will be feed into .Net Front end application
1) What is the best and easy way to do it?
2) Is there any way to automate the migration process? i.e. If a new record gets entered into SharePoint it should be populated into SQL Server 2008.
3) Any other suggestions
Thanks,
John

Dear John,
If it's just a few lists, and you just want to import them "as-is" then it should be possible to do so ... and survive to tell the about it ;-)
Generally speaking, You will need to write a small process (program or script) to read/parse each list and check if the item(s) are in the target table (I assuming that there is a distinct table as target
for each list, and that each list has 'something" you can use to distinct each row), if it's not there, the just add them according to your needs.
Then just rerun the process periodically and it would keep your databases up to date (you could even set ti up to update those records that have changes, but that would delay your process significantly)
What i just described is doable, and not TOO complicated, it could be done i a lot different ways, and with different alternatives of programming/scripting languages. for sure you can do it in any flavor
of .net language, and even powershell.
As I mentioned, this is speaking in general, the actual implementation would depend on your specific needs and the kind of data that you have/need to keep.
Best Regards / Saludos, Marianok
Disclaimer: This post, and all included code and information is provided "AS IS" with no warranties or guarantees and confers no rights. Try it at your own risk, I take no responsibilities.
Aclaración: Esta publicación, y todo en código e información en la misma, es provista "AS IS" / "Como Está" sin garantía alguna y no le confiere ningún derecho. Pruebelo su propio riesgo. No asumo responsabilidad alguna.

Connecting BI Pub with Microsoft SQL server 2008

I am trying to connect Microsoft SQL server 2008 as a Data source in BIP .
Using below info :
Driver Type : Microsoft sql server 2005
Database Driver class : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection String : jdbc:sqlserver://TXHOURDB71D:1443;DatabaseName=StewartAccessIntegration
I am unable establish the connection and the username and password which I giving is right for the connection.
Please let me know if I am missing any config steps.
AJ

Officially, you got to use Hyperion drivers.
For BIPublisher 10.1.3.4 and ++ to connect to Ms sql server,
use the following
This works well and better.
Driver class = hyperion.jdbc.sqlserver.SQLServerDriver
Connection String = jdbc:hyperion:sqlserver://SERVERNAME:PORT;DatabaseName=DBNAME;
http://winrichman.blogspot.com/2009/04/hyperion-driver-to-connect-to-ms-sql.html
In older versions.
you can also copy the drivers to the lib folder or applib folder and try what you were doing.
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b32481/toc.htm#T498352

Getting error while connecting Sharepoint WFE to another Sql Server 2008

Similar Messages

Maybe you are looking for