Getting errors on running BPEL11g and ESB11g Samples

Can some one help resolve the errors we are getting on running the samples? This behaves the same way between BPEL11g and ESB11g samples.
Followed all the steps from SOASampleMediator11g.doc from Samples, but after deploying and running a test with MediatorAddressBookManager gives following error:
<env:Fault xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP-ENV:Client</faultcode><faultstring>Failed to get operation name from incoming request</faultstring></env:Fault>
The BSSV logs don't show any trace of this or may be we are not looking at the right place if some one can point us.
The request message is formatted as follows (from log files of the instance):
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing"><env:Header><wsa:To>https://192.168.1.178:7004/DV900/RI_AddressBookManager</wsa:To><wsa:Action>http://oracle.e1.bssv.JPR01000//getAddressBook</wsa:Action><wsa:MessageID>urn:C15D34A0414711E1BFAB232D99D2AFBD</wsa:MessageID><wsa:ReplyTo><wsa:Address>http://www.w3.org/2005/08/addressing/anonymous</wsa:Address><wsa:ReferenceParameters><instra:tracking.ecid xmlns:instra="http://xmlns.oracle.com/sca/tracking/1.0">83562300fe4fb7cd:7dcacac5:134ecfdeb67:-8000-0000000000003be5</instra:tracking.ecid><instra:tracking.parentComponentInstanceId xmlns:instra="http://xmlns.oracle.com/sca/tracking/1.0">reference:10007</instra:tracking.parentComponentInstanceId><instra:tracking.compositeInstanceCreatedTime xmlns:instra="http://xmlns.oracle.com/sca/tracking/1.0">2012-01-17T15:13:43.654-05:00</instra:tracking.compositeInstanceCreatedTime></wsa:ReferenceParameters></wsa:ReplyTo><wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" env:mustUnderstand="1"><wsse:UsernameToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="UsernameToken-piwc0WUSL3Ogec3qbaFP3g22"><wsse:Username>JDE</wsse:Username><wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">JDE</wsse:Password></wsse:UsernameToken></wsse:Security></env:Header><env:Body><ns1:getAddressBookElement xmlns:ns1="http://oracle.e1.bssv.JPR01000/types/">
<ns1:entityTypeCode xmlns:ns2="http://www.w3.org/2001/XMLSchema-instance" ns2:nil="true"></ns1:entityTypeCode>
<ns1:businessUnit xmlns:ns3="http://www.w3.org/2001/XMLSchema-instance" ns3:nil="true"></ns1:businessUnit>
<ns1:languageCode xmlns:ns4="http://www.w3.org/2001/XMLSchema-instance" ns4:nil="true"></ns1:languageCode>
<ns1:entity>
<ns1:entityLongId xmlns:ns5="http://www.w3.org/2001/XMLSchema-instance" ns5:nil="true"></ns1:entityLongId>
<ns1:entityTaxId xmlns:ns6="http://www.w3.org/2001/XMLSchema-instance" ns6:nil="true"></ns1:entityTaxId>
<ns1:entityId>4242</ns1:entityId>
</ns1:entity>
<ns1:addressCodes xmlns:ns7="http://www.w3.org/2001/XMLSchema-instance" ns7:nil="true"></ns1:addressCodes>
<ns1:industryClassificationCode></ns1:industryClassificationCode>
<ns1:entityName></ns1:entityName>
<ns1:categoryCodesAddressBook xmlns:ns8="http://www.w3.org/2001/XMLSchema-instance" ns8:nil="true"></ns1:categoryCodesAddressBook>
</ns1:getAddressBookElement></env:Body></env:Envelope>
For BPELProcessForWeblogicGetAddressBook, we get the following error:
Error Message: {http://schemas.oracle.com/bpel/extension}remoteFault
Fault ID     default/BPELProcessForWeblogicGetAddressBook!1.0*soa_50487bdf-784c-446b-99fb-9f757c9935c2/GetAddressBookTestBPEL/10006-BpInv0-BpSeq0.3-3
Fault Time     Jan 17, 2012 3:05:53 PM
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Failed to get operation name from incoming request</summary></part><part name="detail"><detail>javax.xml.ws.soap.SOAPFaultException: Failed to get operation name from incoming request</detail></part><part name="code"><code>SOAP-ENV:Client</code></part></remoteFault></bpelFault>

Your stack trace indicates classes that are not part of Sun ONE Web Server 6.1 (e.g. com.iplanet.server.http.servlet.NSServletEntity) but are classes in earlier releases of the web server. It looks like your web application contains classes or .jar files that contain an older implementation of the JSP engine from a previous web server release. Remove these and give it another try.

Similar Messages

  • Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

    Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

    You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
    First you will have to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
    Then you can install PSE from scratch.

  • Getting error while running Foreign currency valuation

    Hi,
    Thanks in advance
    User getting error while running Foreign Currncy valutaion i.e. Internal error with background job sheduling sapf100.
    Do not have good exposure in Foreign Currecy valutaion please help me out..
    Edited by: kudalamallikarjuna on Oct 12, 2011 4:00 PM

    Dear,
    Once you get the error, please go to SM37, put user ID and appropriate dates and Execute
    System will show all jobs submitted by the user id, check if there is any job which is cancelled, select the line and click on Job log,
    In job log please let us know what is shown there..
    Br,Vivek

  • Getting error while running Perl adcfgclone.pl appsTier

    hi ,
    i m getting error while running Perl adcfgclone.pl appsTier
    error:ksh: Perl: not found
    i check for per and ksh
    which perl
    /usr/bin/perl
    which ksh
    /usr/bin/ksh
    (my os out put for perl ,my os is SunOS testserver 5.10 Generic_137137-09 sun4u sparc SUNW,Ultra-250)
    perl -V
    /appl2/applmgr2/prodora/iAS/Apache/perl/lib/5.00503
    /appl2/applmgr2/prodora/iAS/Apache/perl/lib/site_perl/5.005
    /appl2/applmgr2/prodappl/au/11.5.0/perl
    /usr/perl5/5.8.4/lib/sun4-solaris-64int
    /usr/perl5/5.8.4/lib
    /usr/perl5/site_perl/5.8.4/sun4-solaris-64int
    /usr/perl5/site_perl/5.8.4
    /usr/perl5/site_perl
    /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
    /usr/perl5/vendor_perl/5.8.4
    /usr/perl5/vendor_perl
    which i need to set in path
    PATH=$PATH:/usr/local/bin:/usr/ccs/bin:/usr/sfw/bin (like this )
    export PATH
    please help me out

    hi ,
    here is the out put
    # pwd
    /appl2/applmgr2/prodora/iAS/Apache/perl
    # perl -V
    Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
    Platform:
    osname=solaris, osvers=2.10, archname=sun4-solaris-64int
    uname='sunos localhost 5.10 sun4u sparc SUNW,Ultra-2'
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
    Compiler:
    cc='cc', ccflags ='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO',
    optimize='-xO3 -xspace -xildoff',
    cppflags=''
    ccversion='Sun WorkShop', gccversion='', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
    Linker and Libraries:
    ld='cc', ldflags =''
    libpth=/lib /usr/lib /usr/ccs/lib
    libs=-lsocket -lnsl -ldl -lm -lc
    perllibs=-lsocket -lnsl -ldl -lm -lc
    libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version=''
    Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-R /usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE'
    cccdlflags='-KPIC', lddlflags='-G'
    Characteristics of this binary (from libperl):
    Compile-time options: USE_64_BIT_INT USE_LARGE_FILES
    Locally applied patches:
    22667 The optree builder was looping when constructing the ops ...
    22715 Upgrade to FileCache 1.04
    22733 Missing copyright in the README.
    22746 fix a coredump caused by rv2gv not fully converting a PV ...
    22755 Fix 29149 - another UTF8 cache bug hit by substr.
    22774 [perl #28938] split could leave an array without ...
    22775 [perl #29127] scalar delete of empty slice returned garbage
    22776 [perl #28986] perl -e "open m" crashes Perl
    22777 add test for change #22776 ("open m" crashes Perl)
    22778 add test for change #22746 ([perl #29102] Crash on assign ...
    22781 [perl #29340] Bizarre copy of ARRAY make sure a pad op's ...
    22796 [perl #29346] Double warning for int(undef) and abs(undef) ...
    22818 BOM-marked and (BOMless) UTF-16 scripts not working
    22823 [perl #29581] glob() misses a lot of matches
    22827 Smoke [5.9.2] 22818 FAIL(F) MSWin32 WinXP/.Net SP1 (x86/1 cpu)
    22830 [perl #29637] Thread creation time is hypersensitive
    22831 improve hashing algorithm for ptr tables in perl_clone: ...
    22839 [perl #29790] Optimization busted: '@a = "b", sort @a' ...
    22850 [PATCH] 'perl -v' fails if local_patches contains code snippets
    22852 TEST needs to ignore SCM files
    22886 Pod::Find should ignore SCM files and dirs
    22888 Remove redundant %SIG assignments from FileCache
    23006 [perl #30509] use encoding and "eq" cause memory leak
    23074 Segfault using HTML::Entities
    23106 Numeric comparison operators mustn't compare addresses of ...
    23320 [perl #30066] Memory leak in nested shared data structures ...
    23321 [perl #31459] Bug in read()
    27722 perlio.c breaks on Solaris/gcc when > 256 FDs are available
    SPRINTF0 - fixes for sprintf formatting issues - CVE-2005-3962
    6663288 Upgrade to CGI.pm 3.33
    REGEXP0 - fix for UTF-8 recoding in regexps - CVE-2007-5116
    Built under solaris
    Compiled at Jul 31 2008 12:07:52
    @INC:
    /usr/perl5/5.8.4/lib/sun4-solaris-64int
    /usr/perl5/5.8.4/lib
    /usr/perl5/site_perl/5.8.4/sun4-solaris-64int
    /usr/perl5/site_perl/5.8.4
    /usr/perl5/site_perl
    /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
    /usr/perl5/vendor_perl/5.8.4
    /usr/perl5/vendor_perl
    Thanks &Regard

  • Getting error while running SSRS report in SharePoint 2010

    Hi,
    I am getting below error while running a SSRS reports in SharePoint. Your help will be appreciated
    Webpage error details
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)
    Timestamp: Wed, 5 Nov 2014 11:58:42 UTC
    Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 503
    Line: 5
    Char: 62123
    Code: 0
    Thanks,
    Manjunath

    Hi,
    According to your post, my understanding is that you get error while running SSRS reports.
    Basically, If the Request Management service is enabled, it manages all incoming requests by evaluating logic rules against the user requests in order to determine what\which action to take and which machine or machines (targets) in the farm should handle
    the request.
    By default the Request time out value for Request Management service are as follows,
    RequestTimeout                    : 00:01:40
    RequestExecutionTimeout       : 01:00:00
    So the error throws from RM service for those reports who take more than 1 minute to generate the report.
    To solve this issue, we can stop the Request Management service.
    Or increase the time out
    value by making use of following PowerShell  script.
    $waUrl = "URLofWEbApp"
    $wa = Get-SPWebApplication $waUrl
    $rmSettings = $wa | Get-SPRequestManagementSettings
    $req=$wa.RequestManagementSettings
    $timeout2= New-TimeSpan -minutes 5
    Sreq.Requesttimeout=$timeout2
    $req.update()
    For more information:
    http://blogs.technet.com/b/sajiths/archive/2014/08/19/ssrs-reports-timed-out-with-39-503-39-error-sharepoint-2013.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Iam getting error while running the xml report

    Hi,
    I designed the template by using subtemplate.If I run the concurrent program I am getting error like
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    Thanks,
    Bhuvana.

    Whats the error?
    Maybe post the log file so we can see the full file

  • I get Errors in run cmp in jdev905,it is a bug?

    i get Errors in run cmp with jdev9051,but i success with jdev9050,it is a bug?

    Can we get some more details about the error you get and the runtime environment?

  • I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    Please try out the instructions mentioned in this article.
    Thanks!!

  • Getting error while running OIM in built purging script OIM_ReconArch.sh

    Getting error while running OIM in built purging script OIM_ReconArch.sh
    bash-3.00$ cat Err_Arch_Recon_2012_11_01_15_36_06.log
    -- Reconciliation Archival Execution Status
    BEGIN OIM_SP_ReconArchival('N','N',200000,'ARCHIVE_SELECT_WITH_CONS_DROP_REC','Both Events','20110101','20111231'); END;
    ERROR at line 1:
    ORA-00942: table or view does not exist
    ORA-06512: at "PREPRD.OIM_SP_RECONARCHIVAL", line 722
    ORA-00942: table or view does not exist
    ORA-01031: insufficient privileges
    ORA-06512: at line 1
    Please Help

    ORA-06512: at "PREPRD.OIM_SP_RECONARCHIVAL", line 722
    ORA-00942: table or view does not exist
    ORA-01031: insufficient privileges
    (1) Check whether the OIM_SP_RECONARCHIVAL table or view exists or not...
    (2) If it exists, check whether the DEV_OIM user has enough privilege to view this table or not...
    If not, give it all privilege by login as sys as sysdba
    GRANT ALL PRIVILEGES TO DEV_OIM;
    COMMIT;

  • Error message:render error while running sales and reports

    r message:render error while running sales and reports.
    how do you fix it?

    Hello,
    Thanks for your post.
    I can't find any useful information based on the error message. Could you please elaborate your scenario with more detail? In addition, please help to collect detail log information regarding this issue.
    If this issue occured while view a SSRS report, please take a look at the following artice:
    How to diagnose issues when running reports in the report server?
    http://blogs.msdn.com/b/lukaszp/archive/2007/01/31/how-to-diagnose-issues-when-running-reports-in-the-report-server.aspx
    Regards,
    Elvis Long
    TechNet Community Support

  • After upgrading to 10.3.1 I get error -50 on startup and 1008 when I try to sign in to the store

    After upgrading to iTunes 10.3.1 I get error -50 on startup and 1008 when I try to sign in to the Store. How do I fix this?

    I got the solution from another post...
    use the Finder to navigate to /library/preferences/SystemConfiguration and delete NetworkInterfaces.plist ( you will be prompted for username and password), then reboot. You will get a message about new network interface found--just reset the network info.
    That did it for me.

  • After  i have upgraded to Lion OS, this computer has become the worst computer on this planet. Everything is so slow as if i am in 1990's, where you can click on something and take a coffee break. Constantly get errors on MS Outlook and all applications

    After  i have upgraded to Lion OS, this computer has become the **** computer on this planet. Everything is so slow as if i am in 1990 where you can click on something and take a coffee break. Constantly get errors on MS Outlook and all applications are taking for ever to open up. If you guys can't fix it i am going to throw this out the window. Completely fed up with this. Have always loved apple but this is the worst experience i have with the MacBook Air and its not even 1.5yr old.

    There are two ways to upgrade to Lion - one is to install Lion overtop of the existing Snow Leopard and the other is to erase the hard drive, install Lion, and then migrate your applications and user accounts. This second option takes a good deal longer than the first so the preferred method for most is the first method and in most cases it works fine. But not in all.
    captfred has told you what I'd start out doing if it were my computer. There's a good chance that you can identify an application or plug-in that's causing the problem. Upgrading the involved item(s) can solve the problem. Of all the Lion upgrades I performed I had a couple that weren't completely successful even though I'd looked for programs and plug-ins that needed upgrading first. I missed a few but I found them after the fact and had happy computers.
    There was one computer that still had problems. With this computer I reinstalled Lion right over the old version. (If you didn't keep a copy you'll need to download it first.) I still wasn't satisfied so with that computer I rebooted into the recovery partition (Command R after restarting) formatted the hard drive, installed Lion and then migrated. That did solve the problem.

  • Getting Error while running Sample Tutorial...

    Hi,
    I am working on samples---tutorials---Select All.
    I created "Movies" tables in our test database.I modified oc4j-ra.xml. When i modified partner link to point to my own database i can see "SelectAllServices.wsdl" got changed. I mean it added "1" to all "movies" string. I manually modified wsddl and deployed.
    But when i run the process i am getting error like
    <2006-02-13 11:28:30,888> <ERROR> <default.collaxa.cube.ws> <Database Adapter::O
    utbound> <oracle.tip.adapter.db.DBInteraction executeOutboundRead> unable to exe
    cute the NamedQuery: SelectAll.Movies.SelectAllServiceSelect
    06/02/13 11:28:30 java.lang.NullPointerException
    06/02/13 11:28:30 at oracle.tip.adapter.db.exceptions.DBResourceException.
    isRetriable(DBResourceException.java:114)
    06/02/13 11:28:30 at oracle.tip.adapter.db.exceptions.DBResourceException.
    outboundReadException(DBResourceException.java:337)
    06/02/13 11:28:30 at oracle.tip.adapter.db.DBInteraction.executeOutboundRe
    ad(DBInteraction.java:274)
    06/02/13 11:28:30 at oracle.tip.adapter.db.DBInteraction.execute(DBInterac
    tion.java:141)
    06/02/13 11:28:30 at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.exec
    uteRequestResponseOperation(WSIFOperation_JCA.java:469)
    06/02/13 11:28:30 at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIF
    InvocationHandler.java:445)
    06/02/13 11:28:30 at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInv
    ocationManager.java:310)
    06/02/13 11:28:30 at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvo
    cationManager.java:184)
    06/02/13 11:28:30 at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invok
    e(BPELInvokeWMP.java:601)
    06/02/13 11:28:30 at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__execu
    teStatements(BPELInvokeWMP.java:316)
    06/02/13 11:28:30 at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perfo
    rm(BPELActivityWMP.java:185)
    06/02/13 11:28:30 at com.collaxa.cube.engine.CubeEngine.performActivity(Cu
    beEngine.java:3398)
    06/02/13 11:28:30 at com.collaxa.cube.engine.CubeEngine.handleWorkItem(Cub
    eEngine.java:1905)
    06/02/13 11:28:30 at com.collaxa.cube.engine.dispatch.message.instance.Per
    formMessageHandler.handleLocal(PerformMessageHandler.java:75)
    06/02/13 11:28:30 at com.collaxa.cube.engine.dispatch.DispatchHelper.handl
    eLocalMessage(DispatchHelper.java:100)
    06/02/13 11:28:30 at com.collaxa.cube.engine.dispatch.DispatchHelper.sendM
    emory(DispatchHelper.java:185)
    06/02/13 11:28:30 at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEng
    ine.java:5410)
    06/02/13 11:28:30 at com.collaxa.cube.engine.CubeEngine.createAndInvoke(Cu
    beEngine.java:1300)
    06/02/13 11:28:30 at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.creat
    eAndInvoke(CubeEngineBean.java:117)
    06/02/13 11:28:30 at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncC
    reateAndInvoke(CubeEngineBean.java:146)
    06/02/13 11:28:30 at ICubeEngineLocalBean_StatelessSessionBeanWrapper0.syn
    cCreateAndInvoke(ICubeEngineLocalBean_StatelessSessionBeanWrapper0.java:486)
    06/02/13 11:28:30 at com.collaxa.cube.engine.delivery.DeliveryHandler.init
    ialRequestAnyType(DeliveryHandler.java:493)
    06/02/13 11:28:30 at com.collaxa.cube.engine.delivery.DeliveryHandler.init
    ialRequest(DeliveryHandler.java:426)
    06/02/13 11:28:30 at com.collaxa.cube.engine.delivery.DeliveryHandler.requ
    est(DeliveryHandler.java:133)
    06/02/13 11:28:30 at com.collaxa.cube.ejb.impl.DeliveryBean.request(Delive
    ryBean.java:97)
    06/02/13 11:28:30 at IDeliveryBean_StatelessSessionBeanWrapper22.request(I
    DeliveryBean_StatelessSessionBeanWrapper22.java:288)
    06/02/13 11:28:30 at com.oracle.bpel.client.delivery.DeliveryService.reque
    st(DeliveryService.java:101)
    06/02/13 11:28:30 at com.oracle.bpel.client.delivery.DeliveryService.reque
    st(DeliveryService.java:65)
    06/02/13 11:28:30 at ngDoInitiate.jspService(_ngDoInitiate.java:253)
    06/02/13 11:28:30 at com.orionserver.http.OrionHttpJspPage.service(OrionHt
    tpJspPage.java:56)
    06/02/13 11:28:30 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTabl
    e.java:347)
    06/02/13 11:28:30 at oracle.jsp.runtimev2.JspServlet.internalService(JspSe
    rvlet.java:509)
    06/02/13 11:28:30 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.ja
    va:413)
    06/02/13 11:28:30 at javax.servlet.http.HttpServlet.service(HttpServlet.ja
    va:853)
    06/02/13 11:28:30 at com.evermind.server.http.ServletRequestDispatcher.inv
    oke(ServletRequestDispatcher.java:810)
    06/02/13 11:28:30 at com.evermind.server.http.ServletRequestDispatcher.inc
    lude(ServletRequestDispatcher.java:121)
    06/02/13 11:28:30 at com.evermind.server.http.EvermindPageContext.include(
    EvermindPageContext.java:267)
    06/02/13 11:28:30 at displayProcess.jspService(_displayProcess.java:700)
    06/02/13 11:28:30 at com.orionserver.http.OrionHttpJspPage.service(OrionHt
    tpJspPage.java:56)
    06/02/13 11:28:30 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTabl
    e.java:347)
    06/02/13 11:28:30 at oracle.jsp.runtimev2.JspServlet.internalService(JspSe
    rvlet.java:509)
    06/02/13 11:28:30 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.ja
    va:413)
    06/02/13 11:28:30 at javax.servlet.http.HttpServlet.service(HttpServlet.ja
    va:853)
    06/02/13 11:28:30 at com.evermind.server.http.ServletRequestDispatcher.inv
    oke(ServletRequestDispatcher.java:810)
    06/02/13 11:28:30 at com.evermind.server.http.ServletRequestDispatcher.for
    wardInternal(ServletRequestDispatcher.java:322)
    06/02/13 11:28:30 at com.evermind.server.http.ServletRequestDispatcher.for
    ward(ServletRequestDispatcher.java:220)
    06/02/13 11:28:30 at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilte
    r.java:152)
    06/02/13 11:28:30 at com.evermind.server.http.ServletRequestDispatcher.inv
    oke(ServletRequestDispatcher.java:649)
    06/02/13 11:28:30 at com.evermind.server.http.ServletRequestDispatcher.for
    wardInternal(ServletRequestDispatcher.java:322)
    06/02/13 11:28:30 at com.evermind.server.http.HttpRequestHandler.processRe
    quest(HttpRequestHandler.java:798)
    06/02/13 11:28:30 at com.evermind.server.http.HttpRequestHandler.run(HttpR
    equestHandler.java:278)
    06/02/13 11:28:30 at com.evermind.server.http.HttpRequestHandler.run(HttpR
    equestHandler.java:120)
    06/02/13 11:28:30 at com.evermind.util.ReleasableResourcePooledExecutor$My
    Worker.run(ReleasableResourcePooledExecutor.java:192)
    06/02/13 11:28:30 at java.lang.Thread.run(Thread.java:534)
    <2006-02-13 11:28:30,920> <ERROR> <default.collaxa.cube.ws> <AdapterFramework::O
    utbound> file:/C:/OraBPELPM_1/integration/orabpel/domains/default/tmp/.bpel_Sele
    ctAll_1.2.jar/SelectAllService.wsdl [ SelectAllService_ptt::SelectAllServiceSele
    ct(SelectAllServiceSelect_inparameters,MoviesCollection) ] - Could not invoke op
    eration 'SelectAllServiceSelect' against the 'Database Adapter' due to:
    ORABPEL-11614
    DBReadInteractionSpec Execute Failed Exception.
    Query name: [SelectAllServiceSelect], Descriptor name: [SelectAll.Movies].
    See root exception for the specific exception. Caused by Exception [TOPLINK-4002
    ] (OracleAS TopLink - 10g (9.0.4.5) (Build 040930)): oracle.toplink.exceptions.D
    atabaseException
    Exception Description: java.sql.SQLException: ORA-00942: table or view does not
    exist
    Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exi
    st
    Error Code: 942.
    <2006-02-13 11:28:30,920> <INFO> <default.collaxa.cube.ws> <AdapterFramework::Ou
    tbound> Change logging level for Logger 'default.collaxa.cube.ws' to DEBUG to se
    e full error stack.
    Please help me.
    Thanks

    Thanks for instant reply.
    <?xml version="1.0" encoding="UTF-8"?>
    <definitions
    name="SelectAllService"
    targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/SelectAllService"
    xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/SelectAllService"
    xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
    xmlns:pc="http://xmlns.oracle.com/pcbpel/"
    xmlns:top="http://xmlns.oracle.com/pcbpel/adapter/db/top/SelectAll"
    xmlns="http://schemas.xmlsoap.org/wsdl/">
    <types>
    <schema xmlns="http://www.w3.org/2001/XMLSchema">
    <import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/SelectAll"
    schemaLocation="Movies_table.xsd"/>
    </schema>
    </types>
    <message name="MoviesCollection_msg">
    <part name="MoviesCollection" element="top:MoviesCollection"/>
    </message>
    <message name="SelectAllServiceSelect_inparameters">
    <part name="SelectAllServiceSelect_inparameters" element="top:SelectAllServiceSelectInputParameters"/>
    </message>
    <message name="Movies_msg">
    <part name="Movies" element="top:Movies"/>
    </message>
    <portType name="SelectAllService_ptt">
    <operation name="SelectAllServiceSelect">
    <input message="tns:SelectAllServiceSelect_inparameters"/>
    <output message="tns:MoviesCollection_msg"/>
    </operation>
    <operation name="queryByExample">
    <input message="tns:Movies_msg"/>
    <output message="tns:MoviesCollection_msg"/>
    </operation>
    </portType>
    <binding name="SelectAllService_binding" type="tns:SelectAllService_ptt">
    <jca:binding />
    <operation name="SelectAllServiceSelect">
    <jca:operation
    InteractionSpec="oracle.tip.adapter.db.DBReadInteractionSpec"
    DescriptorName="SelectAll.Movies"
    QueryName="SelectAllServiceSelect"
    MappingsMetaDataURL="toplink_mappings.xml" />
    </operation>
    <operation name="queryByExample">
    <jca:operation
    InteractionSpec="oracle.tip.adapter.db.DBReadInteractionSpec"
    DescriptorName="SelectAll.Movies"
    IsQueryByExample="true"
    MappingsMetaDataURL="toplink_mappings.xml" />
    <input/>
    </operation>
    </binding>
    <!-- Your runtime connection is declared in
    J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml
    These 'mcf' properties here are from your design time connection and
    save you from having to edit that file and restart the application server
    if eis/DB/BPELSamples is missing.
    These 'mcf' properties are safe to remove.
    -->
    <service name="SelectAllService">
    <port name="SelectAllService_pt" binding="tns:SelectAllService_binding">
    <jca:address location="eis/DB/BPELSamples"
    UIConnectionName="TestDB"
    ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"
    mcf.DriverClassName="oracle.jdbc.driver.OracleDriver"
    mcf.PlatformClassName="oracle.toplink.oraclespecific.Oracle9Platform"
    mcf.ConnectionString="jdbc:oracle:thin:@xxx.xx.xxx.com:1521:develop"
    mcf.UserName="scott"
    mcf.Password="22F7AFE6F6B9672475468EABDDFF8ABDD62D1A19DF561D1E"
    />
    </port>
    </service>
    <plt:partnerLinkType name="SelectAllService_plt" >
    <plt:role name="SelectAllService_role" >
    <plt:portType name="tns:SelectAllService_ptt" />
    </plt:role>
    </plt:partnerLinkType>
    </definitions>
    Thanks
    CMB
    CA USA

  • Getting error while running sample application of playbook

    Hello,
    I am new to blackberry playbook development.
    I had downloaded NDK 2.0 and done setup. I am successfully able to install and run playbook simulator.
    As shown in the steps how to import and then run the sample application , I had done that,
    But I am not able to build that project.
    Its giving me error.
    i.e
    make: *** No rule to make target `recurse.mk'.  Stop.  
    I had also tried creating new project and then build it. But still I am getting error.
    Its again different error.
    D://target/qnx6/x86/lib/crt1.o: No such file: No such file or directory  
    I dont know why its trying to search at thi location..
    this file exist in d://playbook2.0.0/target/qnx6/x86/lib/crt1.o
    Please Help me.
    Thanks In advance.
    bskania.
    Solved!
    Go to Solution.

    I solved the Error. Its like I have to set the path of environment variable.
    QNX_TARGET. - Set it to your folder path where you had installed the SDK.

  • Getting Error while trying to import VacationRequest Sample

    Hello All,
    Am getting the following error while tring to import Vacation Request Sample:
    "One or more metadata store location(s) configured in
    file:/D:/VacationRequestApp/.adf/MetaInf/adf-config.xml are invalid
    Soa Project will not compile. Please edit this file and fix metadata-store location(s).
    MDS-01333:missing element "mds-config".
    thanks

    Hi,
    I'm following the note 139516.1 on metalink to use Discoverer 4i with E-Business Suite 11.5.10.2.
    Everything goes well until I try to import the eex files (downloaded to my Windows XP desktop). Here is what I get:
    You are running adupdeul, version 115.11
    Start of adupdeul session
    Date/time is Fri Jul 27 10:15:16 WEST 2007
    Log file is adupdeul.log
    Command line arguments are
         "connect=apps/apps@CESEBTST"
         "resp=System Administrator"
         "gwyuid=APPLSYSPUB/PUB"
         "fndnam=APPS"
         "secgroup=standard"
         "topdir=/cygdrive/c/oracle/Disco4i/Discover/discover"
         "language=US"
         "eulprefix=EUL"
         "eultype=OLTP"
         "mode=complete"
    Processing files for US language ...
    Searching /cygdrive/c/oracle/Disco4i/Discover/discover/US directory for files to import ...
    Number of files to process for US language : 2648
    Determining the character set for the import session ...
    The following encoding schemes have been found
         ISO-8859-1
         UTF-8
    ERROR : adupdeul does not support importing files with
    multiple encodings.
    adupdeul is exiting with status 1
    End of adupdeul session
    Date/time is Fri Jul 27 10:20:20 WEST 2007
    Could someone explain me this multiple encodings error and tell me how to avoid it?
    Thanks in advance!

Maybe you are looking for

  • How To Install Informatica and DAC Client on windows

    Dear Friends, I had installed Oracle Informatica 8.6.1 and Oracle DAC Server (10.1.3.4.1) on Linux server (RHEl 32 bit) Now i want to install Informatica and DAC Clients on windows machine. Where to download the software and in the existing Dump i do

  • Reader extension expiry

    I am interested to know what happens to a PDF that has been Reader Extended with signed Digital Signature (PKI) information within it. In this use case, the document is filled, locked (using PKI signature) and is stored in a suitable document managem

  • Is there a keyboard shortcut for zooming out my parents' computer's desktop

    I did not witness what happened, but apparently my brother ctrl+scrolled up(and zoomed all the way in) and my mother has been trying to figure out how to zoom it out. We have a Mighty Mouse, but it can not scroll down for some strange reason(It's bro

  • How Create procedure or function with ADO ?

    Hello, How Create procedure or function with ADO?It's my question. Thanks. Henri

  • Email Link to Safari - Close Safari - Directly Back to Email

    Hi, I hope someone can help me with this. Imagine I am browsing through my emails in Mac Mail.  I click on a link in an email and Safari automatically opens and displays the relevant page either by opening a new Safari window or opening a new tab.  W