Getting Image for every 2 second using AVI stream

Hello,
Could I save image for every 1 or 2 second from AVI stream (not file). It is because I have a piece of software which could capture image on live and could save the image as AVI format. However, I need the file format as JPEG format for every 1 or 2 second.Am I do it like this?
Thanks
fkli

Why don't you get a simple jpeg obtained by ftp from your program? For example I've downloaded a ftp server named webcam32 (http://www.surveyorcorp.com/webcam32) that replaces a jpeg image by ftp every second. After that, it was rather easy to write an applet that displays the updated image. Most probably your program can do that for you.
Hope yu'll find this useful.

Similar Messages

Updating Target Table using DBMS_Scheduler for every 10 seconds

Hi All,
Am new to DBMS_Scheduler Package,
Based on the examples I have written an anonymous block to create job,,, It needs a correction in repeat_interval value,
I have two table emp (Source) and sk_emp (Target),
I want sk_emp table to be update for every 10 seconds,
CREATE PROCEDURE sk_insert_records
IS
BEGIN
   MERGE INTO sk_emp se
      USING emp e
      ON (e.empno = se.empno)
      WHEN MATCHED THEN
         UPDATE
            SET se.ename = e.ename, se.job = e.job, se.mgr = e.mgr,
                se.hiredate = e.hiredate, se.sal = e.sal, se.comm = e.comm,
                se.deptno = e.deptno
            WHERE se.empno = e.empno
      WHEN NOT MATCHED THEN
         INSERT (empno, ename, job, mgr, hiredate, sal, comm, deptno)
         VALUES (e.empno, e.ename, e.job, e.mgr, e.hiredate, e.sal, e.comm,
                 e.deptno);
END;I have written the above procedure and below is my anonymous block of dbms_scheduler
BEGIN
   DBMS_SCHEDULER.create_job (job_name              => 'empdetails',
                              job_type                 => 'STORED_PROCEDURE',
                              job_action               => 'ngshare.sk_insert_records',
                              number_of_arguments      => 0,
                              start_date               => TRUNC (SYSDATE),
                              repeat_interval          => 'FREQ=DAILY;BYSECOND=10',
                              end_date                 => NULL,
                              job_class                => 'DEFAULT_JOB_CLASS',
                              enabled                  => TRUE,
                              auto_drop                => FALSE,
                              comments                 => 'DONE BY SUNIL'
END;Can you please let me know the solution,,
if my repeat_interval is correct, can you please let me know what else need to be done,
This is my Version
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE     11.2.0.1.0     Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - ProductionThanks for your help
Edited by: NSK2KSN on Jul 26, 2010 11:06 AM

Hi It's working, Problem was in repeat_interval it's working now,
Thanks,
I changed
repeat_interval          => 'FREQ=DAILY;BYSECOND=10',to
repeat_interval          => 'FREQ=SECONDLY;BYSECOND=10',Thanks,
Edited by: NSK2KSN on Jul 26, 2010 11:14 AM

How to display image for every article in smartforms

DEAR GURUS ,
i want to display material
(mara-matnr) as well as its image for every material in a smartform .how will i code for this and where will i store my image .
full points will be awarded for the solution . plz send any sample code .
THANKS ,
AMIT RANJAN .

hi,
upload logos using se78 transaction.
then create a window in ur smartform and insert that graphic.
for sample codes check these examples.
SF_EXAMPLE_01
SF_EXAMPLE_02.

Excise invoice getting split for every 2 line items in J1IS

Dear Experts,
While doing J1IS - Excise invoice getting split for every 2 line items.
can anybody help me.
regards,
sri ram

Hi,
Please check the maximum number of line items per excise invoice under customizing
logistics general->Tax on goods movement->India->Basic settings->Maintain excise registration->check for EI items.
I think it is defined as 2.
Regards,
Krishna A S V

Hey...my iphone 3G(4.2.1) is dead. It aint starting. When i plug a charger to it then Apple's logo gets appeared for 2-3 seconds and its getting buzzed off! neither PC nor Itunes is detecting the iphone. i guess therz battery around 20-30%(last i saw)...

hey...my iphone 3G(4.2.1) is dead. It aint starting. When i plug a charger to it an apple's logo gets appeared for 2-3 seconds and then its getting buzzed off! neither PC nor Itunes is detecting the iphone. i guess there was battery around 20-30%(last i saw)...please please help me out!!!!!!

Those can be the features of faulty battery. See if you can get Recovery Mode, don't Restore just enter Recovery Mode. Connect iPhone to computer or Charger. Hold both home and power buttons for about 20 seconds, see if it enters Recovery Mode. When you unplug Recovery Mode will go away. If it enters Recovery Mode fine, then most likely faulty battery. If you like you can always enter Recovery Mode and try to Restore.

My iPhone is getting stuck for a few seconds everytime I do something, if i type a letter it will type it twice or a few times, if i click to close the browser it stucks there for a few seconds before closing, if i try to open some app it gets stuck ther

My iPhone is getting stuck for a few seconds everytime I do something, if i type a letter it will type it twice or a few times, if i click to close the browser it stucks there for a few seconds before closing, if i try to open some app it gets stuck there.
I have restored it and loaded the backed up material again. But this problem doesnt seem to go away. Sometimes it is too much sometimes it is not noticeable, so what exactly could be wrong and what ALL should I do to get it fixed? Please reply.

Thank you. You are very kind. First I backed everything up, then restored as a new phone, and then i couldn't see the contacts, the contacts were not restored when i restored as a new phone. So in order to get the contacts I restored from the backup but then the same problem happened again.
What I meant to saw was that the probelm disappeared when i restored as a new phone, but it reappeared when i restored from the backup. So is there a way to just somehow get the old contacts when the phone is restored as a new phone. All I need from the current phone is the contacts to be there when I retore as a new phone.
I hope I am clear.
Kindly help

My iPhone is getting stuck for a few seconds everytime I do something, if i type a letter it will type it twice or a few times, if i click to close the browser it stucks there for a few seconds before closing, if i try to open some app it gets stuck there

My iPhone is getting stuck for a few seconds everytime I do something, if i type a letter it will type it twice or a few times, if i click to close the browser it stucks there for a few seconds before closing, if i try to open some app it gets stuck there.
I have restored it and loaded the backed up material again. But this problem doesnt seem to go away. Sometimes it is too much sometimes it is not noticeable, so what exactly could be wrong and what ALL should I do to get it fixed? Please reply.

I did that many times, I mean I do it everytime. But it doesnt seem to help. It is strange sometimes the phone is slow and stucks for a many seconds, sometimes it is just one or two seconds. Thank you for your help though, but is there something else that you could think of?

Modem - router getting reset for every 15 mins

My modem and router gets reset for every 15mins and every time I call Comcast not getting proper support . Can someone hear this. This happens every weekend.

freezing at regular intervals:
:http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
: https://addons.mozilla.org/firefox/addon/places-maintenance/
Install add-on, run at least the option mentioned in the article, I ran them all. When finished you can uninstall the extension, all without taking taking Firefox down, The extension is one of the new JetPack extensions.

I am getting message for every app connect to iTunes to push notification

I am getting message for every app connect to iTunes to push notification

I had the same problem too!
But after i changer the usb cable , everything went back to normal
hope it help!

Getting images for toolbar buttons

I am having problem with getting images for my JToolBar buttons. Please where and how can I get the images?

sun has these:
http://developer.java.sun.com/developer/techDocs/hi/repository/

I am getting this error every 5 seconds: Wireless Network Utility[253]: Model -ioClassRef error

In the console I have been getting thousands of these errors. They occur every 5 seconds.
Currently Bluetooth and WiFi is off, and it doesn't matter if they are on or off as far as this error occurring.
I'm not sure when it first began.
12/4/13 9:21:53.209 PM Wireless Network Utility[253]: Model -ioClassRef error
I have no running applications but probably have some startup helpers running, Any clue what this indicates?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It changes nothing, and therefore will not, in itself, solve your problem.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as certain other aspects of the configuration that may have a bearing on the problem. Don’t be alarmed by the apparent complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode, if possible. If you’re now running in safe mode, reboot as usual before continuing. If you can only boot in safe mode, you can still use this procedure, but not all of it will work. Be sure to mention that in your reply, if you haven't already done so.
Below are instructions to enter UNIX shell commands. The commands are safe and do nothing but produce human-readable text output, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. I am not asking you to trust me. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
{ echo "Loaded kernel extensions:"; kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'; echo $'\n'"Loaded user agents:"; launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'; echo $'\n'"Inserted libraries:"; launchctl getenv DYLD_INSERT_LIBRARIES; echo $'\n'"User cron tasks:"; crontab -l; echo $'\n'"System launchd configuration:"; cat /e*/lau*; echo $'\n'"User launchd configuration:"; cat .lau*; echo $'\n'"Login items:"; osascript -e 'tell application "System Events" to get name of login items' | sed $'s/, /\\\n/g'; echo $'\n'"Safari extensions:"; /usr/libexec/PlistBuddy -c Print L*/Saf*/*/E*.plist | awk -F'= ' '/Bundl/{print $2}' | sed 's/\..*$//;s/-[1-9]$//'; printf "\nRestricted user files: %s\n" $(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); echo $'\n'"Extrinsic loadable bundles:"; cd; find -L /S*/L*/E* {,/}L*/{Ad,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do /usr/libexec/PlistBuddy -c 'Print :CFBundleIdentifier' "$d/Info.plist" | egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|print|SoftRAID" && echo ${d%/Contents}; done; echo $'\n'"Unsigned shared libraries:"; find /u*/{,*/}lib -type f -exec sh -c 'file -b $1 | grep -qw shared && ! codesign -v $1' {} {} \; -print; echo; ls -A {,/}L*/{La,Priv,Sta}* L*/Fonts; } 2> /dev/null | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A TextEdit window will open with the output. Post the contents of the TextEdit window (not the Terminal window) — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
{ echo "Loaded system agents:"; sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo $'\n'"Login hook:"; sudo defaults read com.apple.loginwindow LoginHook; echo $'\n'"Root cron tasks:"; sudo crontab -l; echo $'\n'"Log check:"; syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}'; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal.
To prevent confusion, I'll repeat: When you type your password in the Terminal window, you won't see what you're typing.
Note: If you don’t have a login password, set one before taking Step 2. If that’s not possible, skip the step.
Important: If any personal information, such as your name or email address, appears in the output of these commands, anonymize it before posting. Usually that won't be necessary.
Remember, Steps 1 and 2 are all copy-and-paste — no typing, except your password. Also remember to post the output as text, not as a screenshot.
Please post the contents of the TextEdit window, not the Terminal window.

How can I display summary for every 15 minutes using DATE datatype

This is probably an easy question, but the answer eludes me...
I am trying to write a SQL report that displays aggregate totals for every 15 minute period. I know you can do something like this to get every minute:
select to_char(import_date,'MM-DD-YYYY HH24:MI'),
count(*) from
package_ingest
group by to_char(import_date,'MM-DD-YYYY HH24:MI')
But how can I change this query so that I get every 15 minutes?
Any feedback is greatly apprecaited!
Thanks,
-ADK

Hi,
GROUP BY TRUNC (SYSDATE) + FLOOR ( (import_date - TRUNC (SYSDATE))
                                      * 24
                        * 4
                        )SYSDATE is an arbitrary reference point. It doesn't matter if import_date is earlier or later (or sometimes earlier and sometimes later).
If you want to display this in the SELECT clause, or use it in the ORDER BY clause, then repeat the expression there, or compute it once in a sub-query.
WITH got_i_d_15     AS
     SELECT     TRUNC (SYSDATE) + FLOOR ( (import_date - TRUNC (SYSDATE))
                                           * 24
                             * 4
                             ) AS i_d_15
     FROM     package_ingest
--     WHERE     ...          -- If needed
SELECT       TO_CHAR (i_d_15, 'MM-DD-YYYY HH24:MI')     AS import_date
,       COUNT (*)                               AS cnt
FROM       got_i_d_15
GROUP BY i_d_15
ORDER BY i_d_15;

Text gets scrambled for a few seconds

The text on a webpage appears a bit scrambled and compressed for a few seconds every now and then. It's really disturbing when you try to read. It only started happening very recently.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/

Query for getting data for every quarter for financial year

Hi,
My problem is I need to get the data for every quarter for financial year and also I need data for every week for financial year.
For example for financial year 2012-13, Apr2012 to Jun2012 would be Q1, Jul2012 to Sep2012 would be Q2 and so on. Total 8quarters should come upto Apr2013.
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.

lakmesri wrote:
Hi,
My problem is I need to get the data for every quarter for financial year and also I need data for every week for financial year.
For example for financial year 2012-13, Apr2012 to Jun2012 would be Q1, Jul2012 to Sep2012 would be Q2 and so on. Total 8quarters should come upto Apr2013.
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.
How can you get 8 quarters within a year ? I'b be concerned here.
lakmesri wrote:
Hi,
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.
First, that question is really not clearly asked. Second how could it be urgent ? You even did not tell us your Oracle version, did not show any tables descr, output sample nor any effort on your side to work on.
Nicolas.

Mail sent by the program are getting appended for every line item in ITAB.

Hello Experts,
My program has to send mail for every line item in my internal table. Each line itme will provide the data to be filled in body of the mail .Now the problem is when i recieve mail in outlook the body of the mail is getting appended every time i recieve the mail
For example , if the mail has to go for 3 entry in itab out of five then i'm getting 3 mails but 2nd has body of 1 also and 3d has body of 1st and 2nd.
I'm using loop - endloop and it is happening due to this but is there any other way out to send mails for each line without body getting appended.
Please see the code below i'm using:-
LOOP AT lt_bg INTO lw_bg.
PERFORM populate_message_table.>>>>>>Preparing body
PERFORM send_email_message.>>>>>>>>> need to capture in loop as evry line itme has distinct subject of mail
ENDLOOP.
PERFORM initiate_mail_execute_program.
Thanks,
Naveen

Hi,
I'm using Clear wa and refresh ITAB but still i'm getting the body appended.
Thanks

Getting Image for every 2 second using AVI stream

Similar Messages

Maybe you are looking for