Getting ORA-01476 and ORA-06512 in alert log

I am getting this error in my alert log file frequently
ORA-12012: error on auto execute of job 734
ORA-12008: error in materialized view refresh path
ORA-01476: divisor is equal to zero
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 803
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 860
ORA-06512: at "SYS.DBMS_IREFRESH", line 683
ORA-06512: at "SYS.DBMS_REFRESH", line 195
ORA-06512: at line 1
can anybody help in finding the cause and solution for this?
Thanks and Regards
Thiagarajan.

The root error for this issue can be found here:
ORA-01476: divisor is equal to zero
You should debug your materialized view, it is dealing with divisors whose value is equal to zero, and your procedure isn't capable of handling this exception. Try to perform a manual refresh to verify this error is repeatable and look for division operations, then debug values.
~ Madrid

Similar Messages

ORA-00001 and ORA-06512 error on DBMS_WM.ResolveConflicts

We are getting unique constraint error in Production Database. We are able to merge most of the workspaces with no issues. One workspace is givign errors on merge.
Here is the code
begin
dbms_wm.gotoworkspace('denialletterspoc_onmzpulp');
dbms_wm.setdiffversions('denialletterspoc_onmzpulp','LIVE');
dbms_wm.SetConflictWorkspace('denialletterspoc_onmzpulp');
commit;
DBMS_WM.BeginResolve('denialletterspoc_onmzpulp');
DBMS_WM.ResolveConflicts(
workspace => 'denialletterspoc_onmzpulp',
table_name => 'MCM_MESSAGE',
where_clause => ' id in (8403026,10134822,8259485,8259488,8426289,8426287,10186643,8426288) ',
keep => 'CHILD'
exception when others then
DBMS_WM.RollbackResolve('denialletterspoc_onmzpulp');
raise;
end;
ORA-00001: unique constraint (T2.MCM_MESSAGE_PK) violated
ORA-06512: at line 16
I looked at the date in XXX_lt tables and it does not look suspecious. Please help us understand
ORA-00001 and ORA-06512 error.
Amit Gangwar

Hi, Ben
Our OWM_VERSION is 10.2.0.4.3.
I tried disable and enable constraint MCM_MESSAGE_PK. But didn't fix our issue.
Split where clause from " id in (...) " syntax to " id = ... " syntax will reduce performance heavily. And I did some test that " id in (...) " syntax works well in our dev env.
I opened our trace file and get below plsql block. When I perform it get same error with our original codes. Please notice the part of "forall wm_indx in WM_rowids.first .. WM_rowids.last execute immediate 'begin insert into T2.MCM_MESSAGE_lt ... ...", error occurred here. But if I change the "forall" syntax to normal " for ... loop" syntax then no error here. Can you give me some advice or suggestion?
DECLARE
WM_rowids wmsys.lt_ctx_pkg.rowidTabType;
WM_rowids_vt wmsys.lt_ctx_pkg.rowidTabType;
WM_curver wmsys.lt_ctx_pkg.int_tab;
WM_vtRow wmsys.lt_ctx_pkg.int_tab;
WM_nextver wmsys.lt_ctx_pkg.nextver_tab;
WM_found integer := 0;
BEGIN
dbms_wm.gotoworkspace('denialletterspoc_onmzpulp');
dbms_wm.setdiffversions('denialletterspoc_onmzpulp','LIVE');
dbms_wm.SetConflictWorkspace('denialletterspoc_onmzpulp');
/* update the auxilliary table of snapshots */
/* These are rows in the current version that have already been resolved once */
update T2.MCM_MESSAGE_aux st
set (snapShotChild, snapShotParent, versionParent) =
(select p.WM_childds, p.WM_parentds, p.WM_parentver
from T2.MCM_MESSAGE_pkc p
where p.ID = st.ID),
value = '0',
wm_opcode = 'CC'
where st.versionChild = 614
and (ID) in (select ID
from T2.MCM_MESSAGE_pkc p
where (id in (8403026,
10134822,
8259485,
8259488,
8426289,
8426287,
10186643,
8426288)));
select distinct WM_ridchild bulk collect
into WM_rowids
from T2.MCM_MESSAGE_pkc
where (id in (8403026,
10134822,
8259485,
8259488,
8426289,
8426287,
10186643,
8426288))
and WM_childver != 614;
if (WM_rowids.first is not null) then
WM_found := 1;
forall wm_indx in WM_rowids.first .. WM_rowids.last
update T2.MCM_MESSAGE_lt
set retireTime = wmsys.owm_9ip_pkg.activeTimeForDML,
nextver = wmsys.lt_ctx_pkg.getNextVer(nextver,
614,
version,
'denialletterspoc_onmzpulp',
'CRS_LEAF',
22)
where rowid = WM_rowids(wm_indx)
returning wmsys.lt_ctx_pkg.getCurNextVer bulk collect into WM_nextver;
/* These are the rows that have not yet been resolved after the latest BeginResolve */
forall wm_indx in WM_rowids.first .. WM_rowids.last execute immediate
'begin insert into T2.MCM_MESSAGE_lt(ID,DPS_APPLICATION_ID,TYPE_ID,NAME,PRIVILEGED,CAMPAIGN_ID,TEXT,FILE_NAME,GRAPHIC_WIDTH,GRAPHIC_HEIGHT,DESCRIPTION,ACTIVE,INCLUDE_IN_LIBRARY,MESSAGE_FILTER_ID,OP_USER_ID,OP_WORKSPACE,OP_TIME,version,createtime,retiretime,nextver,delstatus,ltlock)
(select t1.ID,t1.DPS_APPLICATION_ID,t1.TYPE_ID,t1.NAME,t1.PRIVILEGED,t1.CAMPAIGN_ID,t1.TEXT,t1.FILE_NAME,t1.GRAPHIC_WIDTH,t1.GRAPHIC_HEIGHT,t1.DESCRIPTION,t1.ACTIVE,t1.INCLUDE_IN_LIBRARY,t1.MESSAGE_FILTER_ID,t1.OP_USER_ID,t1.OP_WORKSPACE,t1.OP_TIME,614, wmsys.owm_9ip_pkg.activeTimeForDML, null,:1, sign(delstatus)*(abs(delstatus)+1),
wmsys.lt_ctx_pkg.checkngetlock(''C'', t1.ltlock, t1.nextver, ''denialletterspoc_onmzpulp'', 0,
''MODIFY'', t1.version, t1.delstatus, 0, 1)
from T2.MCM_MESSAGE_lt t1
where t1.rowid = :2); end;'
using WM_nextver(wm_indx),
WM_rowids(wm_indx)
end if;
if (WM_found = 1) then
wmsys.lt_ctx_pkg.update_modified_tables('T2',
'MCM_MESSAGE',
614,
'denialletterspoc_onmzpulp',
22);
end if;
if (WM_found = 1) then
forall wm_indx in WM_rowids.first .. WM_rowids.last
delete from T2.MCM_MESSAGE_aux
where (ID) in (select ID
from T2.MCM_MESSAGE_lt
where rowid = WM_rowids(wm_indx))
and childState = 'denialletterspoc_onmzpulp';
end if;
/* now insert new syncing information about these rows */
execute immediate 'insert into T2.MCM_MESSAGE_aux (
select ID,
p.WM_childstate, p.WM_parentstate,
p.WM_childds, 614, p.WM_parentds, p.WM_parentver, ''0'',''CC''
from T2.MCM_MESSAGE_pkc p
where ( id in (8403026,10134822,8259485,8259488,8426289,8426287,10186643,8426288) ) )';
END;
Thanks
Amos

Getting ORA-17629 and ORA-17627 during setting up of data guard

Hi All,
I am working on data guard setup, and getting ORA-17629 and ORA-17627. The orapwd file was copied to DR server, but still getting the same error when doing a duplicate database command.
RMAN> run{
2> allocate channel c1 type disk;
3> allocate channel c2 type disk;
4> allocate auxiliary channel a1 type disk;
5> allocate auxiliary channel a2 type disk;
6> duplicate target database for standby from active database
7> spfile
8> set db_unique_name='DRTELPRD'
9> set standby_file_management='AUTO'
10> set FAL_CLIENT='DRTELPRD'
11> set FAL_SERVER='TELRPD'
12> nofilenamecheck;
13> }
allocated channel: c1
channel c1: SID=950 device type=DISK
allocated channel: c2
channel c2: SID=942 device type=DISK
allocated channel: a1
channel a1: SID=97 device type=DISK
allocated channel: a2
channel a2: SID=96 device type=DISK
Starting Duplicate Db at 26-AUG-11
contents of Memory Script:
backup as copy reuse
file 'e:\app\product\11.1.0\db_1\DATABASE\PWDtelprd.ORA' auxiliary format
'e:\app\product\11.1.0\db_1\DATABASE\PWDdrtelprd.ORA' file
'E:\APP\PRODUCT\11.1.0\DB_1\DATABASE\SPFILETELPRD.ORA' auxiliary format
'E:\APP\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEDRTELPRD.ORA' ;
sql clone "alter system set spfile= ''E:\APP\PRODUCT\11.1.0\DB_1\DATABASE\SPF
ILEDRTELPRD.ORA''";
executing Memory Script
Starting backup at 26-AUG-11
RMAN-03009: failure of backup command on c1 channel at 08/26/2011 14:44:17
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01031: insufficient privileges
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
released channel: c1
released channel: c2
released channel: a1
released channel: a2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/26/2011 14:44:17
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on c2 channel at 08/26/2011 14:44:17
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01031: insufficient privileges
ORA-17629: Cannot connect to the remote database server
RMAN>

Thanks for your instructions. It worked very good. But, I am getting errors for redo01.log files. The redo log files are not created.
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'E:\ORACLE\ORADATA\TELPRD\REDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file e:\app\diag\rdbms\drtelprd\drtelprd\trace\drtelprd_mrp0_352.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'E:\ORACLE\ORADATA\TELPRD\REDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Clearing online redo logfile 1 E:\ORACLE\ORADATA\TELPRD\REDO01.LOG
Clearing online log 1 of thread 1 sequence number 3418
Errors in file e:\app\diag\rdbms\drtelprd\drtelprd\trace\drtelprd_mrp0_352.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'E:\ORACLE\ORADATA\TELPRD\REDO01.LOG'

ORA-01403: no data found in alert.log

Dear All,
I am getting ORA-01403: no data found in alert.log.Could you pls help me out what could be reasons behind it..Due to this i m getting loads of alerts.Pls suggest.
Thanks

ORA-01403 No Data Found
Typically, an ORA-01403 error occurs when an apply process tries to update an existing row and the OLD_VALUES in the row LCR do not match the current values at the destination database.
Typically, one of the following conditions causes this error:
Supplemental logging is not specified for columns that require supplemental logging at the source database. In this case, LCRs from the source database might not contain values for key columns. You can use a DML handler to modify the LCR so that it contains the necessary supplemental data. See "Using a DML Handler to Correct Error Transactions". Also, specify the necessary supplemental logging at the source database to prevent future errors.
There is a problem with the primary key in the table for which an LCR is applying a change. In this case, make sure the primary key is enabled by querying the DBA_CONSTRAINTS data dictionary view. If no primary key exists for the table, or if the target table has a different primary key than the source table, then specify substitute key columns using the SET_KEY_COLUMNS procedure in the DBMS_APPLY_ADM package. You also might encounter error ORA-23416 if a table being applied does not have a primary key. After you make these changes, you can reexecute the error transaction.
The transaction being applied depends on another transaction which has not yet executed. For example, if a transaction tries to update an employee with an employee_id of 300, but the row for this employee has not yet been inserted into the employees table, then the update fails. In this case, execute the transaction on which the error transaction depends. Then, reexecute the error transaction.
There is a data mismatch between a row LCR and the table for which the LCR is applying a change. Make sure row data in the table at the destination database matches the row data in the LCR. When you are checking for differences in the data, if there are any DATE columns in the shared table, then make sure your query shows the hours, minutes, and seconds. If there is a mismatch, then you can use a DML handler to modify an LCR so that it matches the table. See "Using a DML Handler to Correct Error Transactions".
Alternatively, you can update the current values in the row so that the row LCR can be applied successfully. If changes to the row are captured by a capture process at the destination database, then you probably do not want to replicate this manual change to destination databases. In this case, complete the following steps:
Set a tag in the session that corrects the row. Make sure you set the tag to a value that prevents the manual change from being replicated. For example, the tag can prevent the change from being captured by a capture process.
EXEC DBMS_STREAMS.SET_TAG(tag => HEXTORAW('17'));
In some environments, you might need to set the tag to a different value.
Update the row in the table so that the data matches the old values in the LCR.
Reexecute the error or reexecute all errors. To reexecute an error, run the EXECUTE_ERROR procedure in the DBMS_APPLY_ADM package, and specify the transaction identifier for the transaction that caused the error. For example:
EXEC DBMS_APPLY_ADM.EXECUTE_ERROR(local_transaction_id => '5.4.312');
Or, execute all errors for the apply process by running the EXECUTE_ALL_ERRORS procedure:
EXEC DBMS_APPLY_ADM.EXECUTE_ALL_ERRORS(apply_name => 'APPLY');
If you are going to make other changes in the current session that you want to replicate destination databases, then reset the tag for the session to an appropriate value, as in the following example:
EXEC DBMS_STREAMS.SET_TAG(tag => NULL);
In some environments, you might need to set the tag to a value other than NULL.

Error ORA-00604 AND ORA-00036

How to resolve ora error ORA-00604 and ORA-00036.
I am getting this error in alert.log:
ORA-00604: ERROR OCCURED AT RECURSIVE SQL LEVEL 51
ORA-00036: MAXIMUM NUMBER OF RECURSIVE SQL LEVELS (50) EXCEEDED.

Did someone create an 'after servererror' trigger?
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4018285967344
Read the part where he provides a query to find the trigger:
select owner, trigger_name
from dba_triggers
where trigger_type = 'AFTER EVENT';

Ora 600 and ora 7445 error in oracle 10g r2

hi all,
we are using Oracle 10g r2.
os is windows 2003 server,
ram is 4 gb.
front end is java .
we got a below mentioned errors.
i got the RA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], [],
and ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
and Error 0 in kwqmnpartition(), aborting txn errors.
for aug 3 11.42.47 we got a ora 600 error after that through front end (java) users can't able to connect the database.the not able to executed the query session disconnected error.
what is reason for theis error . how it will rectifiy.?
pls advice.Below i attached the alret log message .
Sun Aug 02 04:04:24 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:48:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:49:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:38:49 2009
Thread 1 advanced to log sequence 1732
Current log# 3 seq# 1732 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Sun Aug 02 07:44:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:45:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 22:00:26 2009
Thread 1 advanced to log sequence 1733
Current log# 1 seq# 1733 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
Mon Aug 03 07:08:15 2009
Thread 1 advanced to log sequence 1734
Current log# 2 seq# 1734 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
Mon Aug 03 09:28:23 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 09:30:27 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 11:42:47 2009
Errors in file e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc:
ORA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], []
Mon Aug 03 13:20:00 2009
Thread 1 advanced to log sequence 1735
Current log# 3 seq# 1735 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Mon Aug 03 16:07:07 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
Mon Aug 03 16:07:11 2009
Process m000 died, see its trace file
Mon Aug 03 16:07:11 2009
ksvcreate: Process(m000) creation failed
Mon Aug 03 16:08:37 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 16:10:40 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:25:05 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:27:11 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:32:19 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:33:24 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:52:08 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:54:09 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:05:33 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:09:02 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_5132.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x7C34126B] [ADDR:0x0] [UNABLE_TO_WRITE] []
Mon Aug 03 19:10:27 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn

Hi reshumakur
As this is your PRODUCTION system THEN_ The best help to offer in case of ORA-600, and ORA-7445 is to open SR with metalink. Submit with the SR the following
1- Alert log
2- Trace files (in ur case e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc: and e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:)
3- Describe what was happening when you had these errors.
Try to avoid free help when you have ORA-600 and ORA-07445. This errors could be becuase of BUGS. Oracle Support will know this from the call stack in the trace file.
Then Do your best to patch 10.2.0.4 and the latest CPU patch.
Good Luck

ORA-01031, ORA-01034 and ORA-27101 .....very urgent pls help.

After I installed Oracle 8i Enterprise Edition on Win XP, default datanase was not creates so i tried manually creating it but it flashed this error while logging.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\oracle>SQLPLUS
SQL*Plus: Release 8.1.7.0.0 - Production on Wed Apr 30 20:09:50 2003
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Enter user-name: INTERNAL
Enter password:
ERROR:
ORA-01031: insufficient privileges
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist

U r getting ORA-01034 and ORA-27101 because ur database has not started.
try connecting svrmgrl as below
go to command prompt
svrmgrl
connect internal
startup pfile=<pfilename with full path>
Now logon to sqlplus and try to connect as system.

Work around/Alternate solution for Oracle error ORA-01460 and ORA-02063

After the installation of Oracle.DataAccess version 2.111.7.20, I get the following error.(the code worked fine with Oracle.DataAccess version 9.2.0.700 )
I have attached the error as well as the sample code.
ORA-01460 and ORA-02063 are known bugs in the new ODP but would like to know if there is any Work around/Alternate solution for this problem(other than
the use of stored procs)..
Thanks!
Error:
ORA-01460: unimplemented or unreasonable conversion requested
ORA-02063: preceding line from BSREAD_STAGINGRO at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, Boolean bCheck)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader(Boolean requery, Boolean fillRequest, CommandBehavior behavior)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader()
SampleCode
private bool isValidFieldData(string clientName, string fieldNumber, string uniqueID, string clientID)
using (OracleConnection mBSConnection = new OracleConnection(mBSConnectionString))
OracleDataReader oRdr = null;
OracleCommand Valid_FieldData_Command = null;
try
Valid_FieldData_Command = new OracleCommand();
Valid_FieldData_Command.Connection = mBSConnection;
Valid_FieldData_Command.CommandText = "SELECT uniqueid FROM EXTDB.BSData WHERE agencyid = :agencyid and agencyname=:agencyname AND fieldnumber =:fieldnumber AND uniqueid = :uniqueid";
Valid_FieldData_Command.Parameters.Add(":agencyid", OracleDbType.Varchar2, 255).Value = agencyID;
Valid_FieldData_Command.Parameters.Add(":agencyname", OracleDbType.Varchar2, 255).Value = agencyName;
Valid_FieldData_Command.Parameters.Add(":fieldnumber", OracleDbType.Varchar2, 255).Value = fieldNumber;
Valid_FieldData_Command.Parameters.Add(":uniqueid", OracleDbType.Varchar2, 255).Value = uniqueID;
mBSConnection.Open();
oRdr = Valid_FieldData_Command.ExecuteReader(); ->Error occurs here
The error occurs whenever the length of any of the parameter is increased. But there is no specific length where it is breaking down.
For example in this case, it breaks down with the given error if
agencyID > 8
agencyName > 6
fieldNumber > 9
uniqueid > 6

The problem was mapping input parameter type.
VARCHAR2-type mapping input parameter works with String-type PF parameter. But CHAR-type won't.

ORA-00604 and ORA-12705 when adding datasource in Mapviewer

Hi,
I am trying to add a datasource using standalone OC4J Mapviewer and I'm having some problems.
I'm using Oracle8i on Windows 2000 Server. Windows 2000 is in Spanish.
When I add the datasource I get the following XML error
<?xml version="1.0" encoding="UTF-8" ?>
<oms_error>Message:[MapperConfig] no se puede agregar el origen de datos de mapa. Wed Oct 12 21:29:58 ART 2005 Severity: 0 Description: at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.java:528) at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.java:308) at oracle.lbs.mapserver.oms.addDataSource(oms.java:937) at oracle.lbs.mapserver.oms.doPost(oms.java:329) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:534)</oms_error>
The part in spanish means: Map Datasource cannot be added.
In the console I get ORA-00604 and ORA-12705
I know that ora-12705 has something to do with NLS_LANG.
I put the following query in sql*plus:
select *
from v$nls_parameters
where parameter in ('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET');
And got AMERICAN.AMERICA.WE8ISO8859P1
I also changed the NLS_LANG variables in the registry to the same characterset. (One of them was in spanish characterset).
I don't know what else to do! Pleas help!

Yes, you are in the wrong forum, but it sounds like you have your environment variable (or registry entry) for ORA_NLS33 pointing at the wrong directory.
Steve

ORA-02097 and ORA-00384

I have a 10g database over linux with archive mode activated. Now i want to create a new destination for the Flas recovery area and the Archive logs because both are in a file system and this is very small the size of 10 GB and is full now.
My question is how i can change the path to another brand new, i try on Enterprise manager and SQL Plus and get the same error: ORA-02097 and ORA-00384.
So i will aprecciate your anwers because i had no space left for the archive logs,
Thanks,
Carlos Robles.

Why not just create a symbolic link in the file system?
That said the proper thing to do is what you are trying but given you didn't post a version number and didn't post your DDL and didn't post the error messages we can't really help you.
I know what you're thinking so here are the details:
Version numbers look like this: 10.2.0.4
Exceptions have numbers and text ... without the text the number is near worthless
We have no idea what ALTER SYSTEM statement you tried: Post it.
The docs are here:
http://tahiti.oracle.com

ORA-00604 AND ORA-02248

Hi,
I am working in oracle 8i and windows OS . If i connected to DB using PL/SQL its working fine . But if i connected to my front end Application Java its showing Error as ORA-00604 AND ORA-02248 Invalid alter session privilege.
But i am able to connect to another DB's through front end.
Please provide me the solutions
Regs...

if i connected to my front end Application Java its
showing Error as ORA-00604 AND ORA-02248 Invalid
alter session privilege.Looks like you front end application running "alter session..." command and that has invalid value , that is why you getting error. Check code of you front end application.

Ora-00604 and Ora-00904 in a With Clause

Hi:
If I use a âleft outer joinâ in the then following SQL I get a result set, but when I use a âfull outer joinâ I get ora-00604 and ora-00904. Please let me know why this is happening?
Full Join Example:
with XYZ as (
select tp.field1 as APID1
,pay.field2 as APAMT1
from Table1 tp join table2 pay on tp.id = pay.id
where rownum < 10
, XYZ2 as (
select Nvl(pd.field1,0) as PID
, pd.field2 as PAMT
from Table1 tp join table3 pd on tp.id = pd.id
where tp.field1 = -1
select COALESCE(XYZ.APID1, xyz2.PID,0)as PNM
, NVL(XYZ.APAMT1, 0) as XYZAMT
, NVL(xyz2.PAMT, 0) as XYZ2AMT
from XYZ full outer join XYZ2 on PID = APID1
Note: the SQL in XYZ2 returns 0 rows.
The error I get is :
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "from$_subquery$_003"."QCSJ_C003008_12": invalid identifier
Left Outer Join Example (This returns result):
with XYZ as (
select tp.field1 as APID1
,pay.field2 as APAMT1
from Table1 tp join table2 pay on tp.id = pay.id
where rownum < 10
, XYZ2 as (
select Nvl(pd.field1,0) as PID
, pd.field2 as PAMT
from Table1 tp join table3 pd on tp.id = pd.id
where tp.field1 = -1
select COALESCE(XYZ.APID1, xyz2.PID,0)as PNM
, NVL(XYZ.APAMT1, 0) as XYZAMT
, NVL(xyz2.PAMT, 0) as XYZ2AMT
from XYZ left outer join XYZ2 on PID = APID1
Note: the SQL in XYZ2 returns 0 rows.
Thank you,

Please refer to Doc ID: 311230.1 which has detailed information about these errors.

ORA-1403 and ORA-20505 updating the PK in the form

I have a application based on one table and the primary key is the column NAME , every think was running ok , but now I am getting the error ORA-20505 and ORA-1403 when I edit a row and change the value for NAME ( still unique ) and click in apply the changes botton.
the table has only one row , this should be simple, I can insert ant update in sqlplus.
Thanks.

user459480,
Rather than trying to work around this I suggest you add a non-update-able primary key column and then put a unique constraint on the name column. The application is using the value of the PK column "name" to find the record and now you are going around and changing it. No wonder it gives you a 1403 which means "I can't find what you told me to go get".
You might get over this hump but there will be more and bigger humps ahead if you continue down this path. Adding a number type column as a pk with a sequence and trigger is a small price to pay for the stability of a real primary key (ie immutable).
Greg

ORA 02097 and ORA 00439

Hi,
Anybody out there can help me out with this.i am getting these ORA 02097 and ORA 00439 msg constantly.how can i solw these.plz explain.
Thanx in advance
Navneet Kaur

Hi,
See
http://ora-02097.ora-code.com/
http://ora-00439.ora-code.com/
Cheers,
Colin

Instance terminted with ORA-00445 and ORA-00494

Hi Folks,
Oracle 11g Instance terminated after ORA-00445 and ORA-00494. Not sure what is the problem didnot have this problem before. Can any body pls help?
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Below is the message found in alertlog.
Archived Log entry 17939 added for thread 1 sequence 17973 ID 0xee1270c6 dest 1:
Thu Apr 19 02:32:15 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:32:17 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:33:32 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:35:56 2012
Process 0x0xdfb80810 appears to be hung while dumping
Current time = 1203097316, process death time = 1203032607 interval = 60000
Attempting to kill process 0x0xdfb80810 with OS pid = 7563
OSD kill succeeded for process 0xdfb80810
Thu Apr 19 02:36:32 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:38:11 2012
Errors in file /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/trace/vchsit2_smco_8548.trc (incident=76297):
ORA-00445: background process "W000" did not start after 120 seconds
Incident details in: /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/incident/incdir_76297/vchsit2_smco_8548_i76297.trc
Thu Apr 19 02:38:11 2012
Errors in file /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/trace/vchsit2_arc2_7523.trc (incident=76329):
ORA-00494: enqueue [CF] held for too long (more than 900 seconds) by 'inst 1, osid 7315'
Incident details in: /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/incident/incdir_76329/vchsit2_arc2_7523_i76329.trc
Thu Apr 19 02:38:11 2012
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 19-APR-2012 02:38:11
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (2743) as a result of ORA-609
Thu Apr 19 02:38:12 2012
Trace dumping is performing id=[cdmp_20120419023812]
Killing enqueue blocker (pid=7315) on resource CF-00000000-00000000 by (pid=7523)
by killing session 6.1
Killing enqueue blocker (pid=7315) on resource CF-00000000-00000000 by (pid=7523)
by terminating the process
ARC2 (ospid: 7523): terminating the instance due to error 2103
Instance terminated by ARC2, pid = 7523
Thu Apr 19 10:43:07 2012

Hi;
Please see:
ORA-00445: Background Process "xxxx" Did Not Start After 120 Seconds [ID 1345364.1]
Regard
Helios

Getting ORA-01476 and ORA-06512 in alert log

Similar Messages

Maybe you are looking for