Getting same result in sumof totalscolumn in report
hi everyone,
i have operating expenses in one column and operatig expenses2 in other column and i need to display the result in third column if they both gets 0 values.
i tried with excel conditional formatting functions but i am not getting.If any one knows please give me the solution
eg:
if sumof op=0 &op2=0
then
this result need to display in 3 column
Hi,
Please try this one-
Formula in Third column-
IfThen( (Column[A] = 0 and Column[B] =0), 0,Sum(Column[A], Column))
If both column A and Column B is zero then in 0 will be in third col or sum of column A and B in third column.
Hope this will work.
Thanks and Regards,
Mohit Jain
Similar Messages
-
Every time I open photoshop elements 11, it uninstalls. I have tried reinstalling 3 times, but get same result.
Can anyone help with this issue? Please!Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
Hello,
I'm looking for the most obvious and simple way to, from Labview :
1- Start the Teststand engine : DONE
2- Get a list of SEQ files to execute : DONE
3- Loop through the list to execute each SEQ file : <- found some examples but I have some trouble with the UIMessage stuff
http://zone.ni.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/executing_sequences_using_api_labview/
4- Get the result of the SEQ execution : <- unsure
5- Get the XML path+name of the report file generated : <- obviously not easy
http://digital.ni.com/public.nsf/allkb/3D3B2358DF9B786B8625789500549A3B
http://forums.ni.com/t5/NI-TestStand/Getting-Report-File-Path-location-at-execution-in-TestStand-2012/td-p/3041789
Here is my current implementation :
David Koch
Hello,
I tried to work from this example :
http://forums.ni.com/t5/NI-TestStand/Execution-of-TestStand-Sequence-in-LabVIEW-via-TS-API-Different/td-p/2939616/page/2#M46686
However it remains unclear about how to get a simple
answer from just running a sequence file out of any
model so far (Simple Pass). Like I told you, all what
I need, once the TS engine is started, is a VI with the
following interface :
INPUT
1- TS engine reference
2- SEQ file path (path or string)
3- Sequence name to execute
4- UUT string (optional, but yeah)
5- error in
OUTPUT
1- Result boolean (PASS/FAIL)
2- Path to XML report
3- error out
It would be so cool to just have this
About the surrounding UI, I'm working on it. The LV
code is not really important at this point, it's running
a SEQ file that matters to me.
David Koch
-
Getting same results without inline view
Hi gurus,
My database version is 10.2.0.4.0.
I have a couple of tables as follows:
CREATE TABLE xxgroups(group_number NUMBER, description VARCHAR2(30));
INSERT INTO xxgroups VALUES(1,'Group 1');
INSERT INTO xxgroups VALUES(2,'Group 2');
INSERT INTO xxgroups VALUES(3,'Group 3');
INSERT INTO xxgroups VALUES(4,'Group 4');
INSERT INTO xxgroups VALUES(5,'Group 5');
CREATE TABLE xxgroup_persons(group_number NUMBER, person_number NUMBER, first_name VARCHAR2(30), last_name VARCHAR2(30));
INSERT INTO xxgroup_persons VALUES(1, 1, 'John', 'Smith');
INSERT INTO xxgroup_persons VALUES(1, 2, 'James', 'Smith');
INSERT INTO xxgroup_persons VALUES(1, 3, 'Joe', 'William');
INSERT INTO xxgroup_persons VALUES(2, 4, 'Julien', 'Ford');
INSERT INTO xxgroup_persons VALUES(2, 5, 'James', 'Kelly');
INSERT INTO xxgroup_persons VALUES(3, 6, 'Francis', 'Smith');
INSERT INTO xxgroup_persons VALUES(5, 7, 'Jerry', 'Ford');
INSERT INTO xxgroup_persons VALUES(5, 8, 'Alfred', 'Willis');
INSERT INTO xxgroup_persons VALUES(5, 9, 'Jon', 'Preston');
COMMIT;I'd like to get a query to return for each group, the person with lower person_number (if no person assigned to the group, then the query should still return the group with empty person). I know I can do it using for instance:
SELECT group_number, person_number, first_name, last_name
FROM (SELECT a.group_number, b.person_number, b.first_name, b.last_name
, RANK() OVER (PARTITION BY a.group_number ORDER BY person_number) person_order
FROM xxgroups a, xxgroup_persons b
WHERE a.group_number = b.group_number (+)
WHERE person_order = 1
ORDER BY group_number;
GROUP_NUMBER PERSON_NUMBER FIRST_NAME LAST_NAME
1 1 John Smith
2 4 Julien Ford
3 6 Francis Smith
4
5 7 Jerry Fordbut would it be possible to get the same results without using inline view?
Thanks.You could try this the KEEP function:
scott@orapdt> SELECT a.group_number,
2 min(b.person_number) as person_number,
3 min(b.first_name) keep (dense_rank first order by person_number) as first_name,
4 min(b.last_name) keep (dense_rank first order by person_number) as last_name
5 FROM xxgroups a, xxgroup_persons b
6 WHERE a.group_number = b.group_number (+)
7 group by a.group_number;
GROUP_NUMBER PERSON_NUMBER FIRST_NAME LAST_NAME
1 1 John Smith
2 4 Julien Ford
3 6 Francis Smith
4
5 7 Jerry Ford
5 rows selected. -
iTunes truly epitmizes the Definition of Insanity. I can't even download free apps. iTunes says they are having technical difficulties. What an understatement. iTunes makes everyone go crazy by saying to try again later. When we try again, same result.
Ha!
I've been saying that iTunes is a "@#8*!^8 crazy *#!" ever since I reinstalled it, LOL!
I had that thing, just about *duct-taped and stuffed between the attic rafters* for the past 3 years,
and never missed it.
Then...well...I told my husband, that I must've incurred an Aneurysm during sleep...because for some reason, the %*@$! has now reappeared, and is just as OCD and Hyper, as it was when I had it
*locked up*!
But my husband keeps swearing that I re-downloaded it, because I missed hearing my favorite
pod-shows.
Anyhoo...since, I've re-inflated it, I've only used it for 1/2 an evening, before I gave a yell, and pulled the plug on it, yet again!
A.n.y.t.i.m.e I tried to do ANYTHING, that crazy &#tc+ was right there...and I swear that I could hear a hyper never-pausing-for-breath 'voice', which seemed to shrill:
"Can I do it, huh, huh? Can I open, huh? huh? I wanna do it, I wanna I wanna!!
"Prrlleaaase! I just wanna open it!! You know I can! So can I, huh huh!!"
So it's *locked-up under my porch crawl space* until....well....until... (0;
I actually just came on here to say that, during the 3 or so hours that I attempted to reason with that Demento, I was never able to access the iTunes Store, either.
"I can't access the iTunes Store.
It must be busy, so I'll try again later."
And while it was trying to convince of that, I managed to get in and out of the iTunes Store, about 3 separate times...and had managed to listen and download about 5 or so pods...but it just kept repeating that same line.
Like its dose of Lithium had worn off, and now it was just about ready to show me its
*Alvin the Chipmunk Alter-Persona*...
But it never got the chance.
I haven't heard a peep out if since, LOL!
I figure there's enough to keep me occupied on here...so if doesn't behave itself soon....
Yeah...you KNOW what I'm talkin' bout, LOL!
Well, I gots to go now, but you have yourself, a fabulous weekend!
~Macaholic93 -
Can anyone give me suggestions .. after creating a "logo" or a "header" to be used by someone else in a presentation or report.. I can't figure out how to make the background transparent, and keep the image clear. Created in CS6 Illustrator.. tried opening in Photoshop and saving as JPEG.. no luck.
Have you tried exporting for MS Office?
You could also try exporting as transparent PNG with 144 ppi.
On top of that: don't scale it in Office. -
Can't get same results on query using dynamic time frame versus static time frame
I am trying to run a query on a Lookout database using MS Access. If I use static dates as criteria in the "LocalTime" field I get results that are marked on the hour, eg. 1:00 pm. If I try to use dynamic dates as criteria I get results that are marked on the half hour, eg. 1:30 pm. The results are for each hour but the difference in the queries causes the dynamic query to come up with different results than a spreadsheet generated by Lookout that the client relies on for backup. Does anybody know a way I can get the dynamic date query to act like the static query? I can't use static queries because this is for a daily report and the client will not pay for me to make 365 new queries each y
ear. I tried NI's tech support but they pointed me to the same SQL examples that are in the Developer's Manual which are all static queries. Tech Support also told me they can't help me figure out dynamic queries.Yes I am using an interval clause that says "interval=1:00". I create the localtime clause dynamically and this seems to be where my problem lies. No matter what I have the dynamic function create the date/time as, i.e., 07/01/2002 or 07/01/2002 12:00 AM or 07/01/2002 00:00, the time the query returns for each record is 32 minutes after the hour. From this I assume it is averaging each hour interval from one half hour mark to the next, eg. from 12:30 am to 1:30 am. This is born out because the hourly averages do not match the averages for the same time frame that Lookout exports to an Excel spreadsheet. Thanks for your suggestion though.
-
I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.
Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
I have attempted to download Lion multiple times. Somehow it pauses during download and will not resume. I begin again at App Store. Start the install over. I have attempted this numerous times without success. Not sure why I cannot get the download to resume and I don't know why it pauses to begin. Estimated time to download....6.5 hours UGH. Help?
Your system should be OK. I suspect the issue may be with your Comcast service. Have you tried downloading anything else, for example navigate to 10.6.8 Update Combo and see if you can download that OK. If that works OK then you can go to the Mac App Store and navigate through their Support. You can find a link to that in the Mac App Store Quick Links.
The problem is we don't know where the problem is. One thing you can also do is find a free app on the Mac App Store and see if it will download OK. If it does then you should contact AppleCare or visit your local Apple Store or AASP for some help. -
Can we make one query to get same results from 3 tables
CREATE TABLE TABLE1 (NODEID VARCHAR2(4));
CREATE TABLE TABLE2 (NODEID VARCHAR2(4));
CREATE TABLE TABLE3 (NODEID VARCHAR2(4));
INSERT INTO TABLE1 VALUE('1004');
INSERT INTO TABLE1 VALUE('1004');
INSERT INTO TABLE1 VALUE('1002');
INSERT INTO TABLE1 VALUE('1002');
INSERT INTO TABLE1 VALUE('1001');
INSERT INTO TABLE1 VALUE('1001');
INSERT INTO TABLE1 VALUE('1006');
INSERT INTO TABLE1 VALUE('1006');
INSERT INTO TABLE1 VALUE('1005');
INSERT INTO TABLE1 VALUE('1005');
INSERT INTO TABLE2 VALUE('1004');
INSERT INTO TABLE2 VALUE('1004');
INSERT INTO TABLE2 VALUE('1004');
INSERT INTO TABLE2 VALUE('1002');
INSERT INTO TABLE2 VALUE('1002');
INSERT INTO TABLE2 VALUE('1002');
INSERT INTO TABLE2 VALUE('1002');
INSERT INTO TABLE3 VALUE('1001');
INSERT INTO TABLE3 VALUE('1001');
INSERT INTO TABLE3 VALUE('1006');
INSERT INTO TABLE3 VALUE('1006');
INSERT INTO TABLE3 VALUE('1005');
INSERT INTO TABLE3 VALUE('1005');
INSERT INTO TABLE3 VALUE('1004');
INSERT INTO TABLE3 VALUE('1004');
INSERT INTO TABLE3 VALUE('1004');
INSERT INTO TABLE3 VALUE('1002');
INSERT INTO TABLE3 VALUE('1002');
INSERT INTO TABLE3 VALUE('1002');
INSERT INTO TABLE3 VALUE('1002');
Select count(*), count(distinct nodeid)
from table1, table2,table3
where table1.nodeid=table2.nodeid and table1.nodeid=table3.nodeid;
Select count(*), count(distinct nodeid)
from table1, table3
where table1.nodeid=table2.nodeid;
Select count(*), count(distinct nodeid)
from table2, table3
where table2.nodeid=table3.nodeid;Aside from your insert statements not working... (should be as follows)...
DROP TABLE TABLE1;
DROP TABLE TABLE2;
DROP TABLE TABLE3;
CREATE TABLE TABLE1 (NODEID VARCHAR2(4));
CREATE TABLE TABLE2 (NODEID VARCHAR2(4));
CREATE TABLE TABLE3 (NODEID VARCHAR2(4));
INSERT INTO TABLE1 VALUES('1004');
INSERT INTO TABLE1 VALUES('1004');
INSERT INTO TABLE1 VALUES('1002');
INSERT INTO TABLE1 VALUES('1002');
INSERT INTO TABLE1 VALUES('1001');
INSERT INTO TABLE1 VALUES('1001');
INSERT INTO TABLE1 VALUES('1006');
INSERT INTO TABLE1 VALUES('1006');
INSERT INTO TABLE1 VALUES('1005');
INSERT INTO TABLE1 VALUES('1005');
INSERT INTO TABLE2 VALUES('1004');
INSERT INTO TABLE2 VALUES('1004');
INSERT INTO TABLE2 VALUES('1004');
INSERT INTO TABLE2 VALUES('1002');
INSERT INTO TABLE2 VALUES('1002');
INSERT INTO TABLE2 VALUES('1002');
INSERT INTO TABLE2 VALUES('1002');
INSERT INTO TABLE3 VALUES('1001');
INSERT INTO TABLE3 VALUES('1001');
INSERT INTO TABLE3 VALUES('1006');
INSERT INTO TABLE3 VALUES('1006');
INSERT INTO TABLE3 VALUES('1005');
INSERT INTO TABLE3 VALUES('1005');
INSERT INTO TABLE3 VALUES('1004');
INSERT INTO TABLE3 VALUES('1004');
INSERT INTO TABLE3 VALUES('1004');
INSERT INTO TABLE3 VALUES('1002');
INSERT INTO TABLE3 VALUES('1002');
INSERT INTO TABLE3 VALUES('1002');
INSERT INTO TABLE3 VALUES('1002');and you're queries not working...
SQL> Select count(*), count(distinct nodeid)
2 from table1, table2,table3
3 where table1.nodeid=table2.nodeid and table1.nodeid=table3.nodeid;
Select count(*), count(distinct nodeid)
ERROR at line 1:
ORA-00918: column ambiguously definedI'm guessing you want:
SQL> Select count(*), count(distinct table1.nodeid)
2 from table1, table2,table3
3 where table1.nodeid=table2.nodeid and table1.nodeid=table3.nodeid;
COUNT(*) COUNT(DISTINCTTABLE1.NODEID)
50 2You haven't explained to us what database version you are using or what you want the output to look like when these 3 queries are combined.
Please read: {message:id=9360002} and learn to post a good question, and use {noformat}{noformat} tags to show your code/data. -
when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!
I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps. -
I am trying to get into my Game Center app but every time I tap on the app it opens too a blank white screen. I have tried several times to reset my phone but I get the same result.
Hello there Sweebs44,
It sounds like you are tapping the Game Center app to open it, but the screen is blank. I recommend signing out of your account:
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
From: iPhone User Guide
http://help.apple.com/iphone/7/#/iph6c493cac
Then close all the running apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone sign back into your account and try again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Take care,
Sterling -
I am trying to download and album off ITUNES but when I get to the billing site and attempt to purchase it, it gives me a message saying "Your Session has timed out." It gives me no other option that to try again and I just keep getting the same results. Anyone have any ideas on what I can do?
Hi, Kenny.
Thank you for visiting Apple Support Communities.
There are a couple things that I would recommend trying. Try closing all open applications and power cycle the device. Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below. If the issue persists, try completely signing out of the iTunes Store on the iOS device and sign back in. Be sure to test downloading an application after each step.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H. -
My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!
Maybe you are looking for
-
Hi All, My requirement is to change a "field to edit" which is in "customer fields tab" of an item in "crmd_order" transaction. Please find the screen shot. Please help me with this issue
-
Can Adobe Acrobat Pro 9 function as a previewer in windows folders?
I use Adobe Acrobat Pro 9 and want my .pdf files to only open with adobe pro, I also want to have a previewer option in file folders. With adobe pro 9 only on my machine I do not have the previewer capabilities and when I download abobe reader that p
-
.mac iWeb site with yahoo domain- much trouble
I have 5 websites made with iweb hosted by .mac. I just got a yahoo domain name, (organizedmayhemmusic.com). I want to set that domain name to only one of my sites within iWeb, but I'm having allot of trouble. Right now I have my yahoo domain setting
-
Regarding Inventory report in ALV
hi experts can you pls describe the below task and give me tables and fields for below · On Hand Inventory report in ALV format for listing plant, material details, and Identifying and inventory quantity and inventory amount sorted on plant with
-
Crop Area Tool leaves a small border when using Save for Web
A grain of sand as problems go; tiny but irritating. The process: Click on an object (or grouped objects) with the Crop Area Tool. Click File, and Save for Web and Devices The problem: The resulting image is offset one pixel from the crop area box, l