Getting the -18001 error when using TestStandLVRTS

I have developed my TestStand (v2.0) test sequences based on the LabVIEW adaptor. Everything runs well with the labVIEW development system. However, when I switch the labVIEW adaptor to the LabVIEW runtime server such as the TestStandLVRTS, I got the -18001 Error from the TSAPI with the message of "Unable to launch 'TestStandLVRTS.Application' ActiveX automation server".
I have tried all the suggested fixes described in the article "-18001 Errors When Using TestStand and LabVIEW". The error still persists.
Could you help me to solve this problem? Without this problem being solved, we will not be able to deploy our test sequences.

Hello HCL -
Below I have attached my version of the 6.1 built TestStandLVRTS folder. If you are using the build file provided in this folder when re-compiling your run time server, you should be seeing the .tlb file being auto-generated. Verify that you are using the build file that ships with TestStand and that under application settings that you have the 'Enable ActiveX server' checkbox enabled.
There are no known bugs with LabVIEW 6.1 related to problems launching the TestStandLVRTS.exe, and given the good behavior I have seen between the two products here on the test machines, I am interested in seeing first if the problem lies with the executable and then we will try and troubleshoot your particular system.
--Regards
Elaine R.
National Instruments
http://www.ni.com/ask
Attachments:
LabVIEW.zip ‏227 KB

Similar Messages

I get the following error when trying to use the itunes store "your apple id has been disabled"

I get the following error when trying to use the itunes store "your apple id has been disabled". My account was disabled when someone else had been using it without my knowledge. I changed my apple id password and the apple id is still fine, but itunes has it disabled. I verified that the computer is authorized for this apple id. What to do now?

Welcome to the Apple Community.
Contact Apple through iTunes Store Support

I get the following error when i try to print to a brother hl 5470dw printer using mac 10.6.8 : /usr/libexec/cups/filter/pstoraster failed

i get the following error when i try to print to a brother hl 5470dw printer using mac 10.6.8 : /usr/libexec/cups/filter/pstoraster failed

This seems to come up sometimes. Here is a very detailed discussion, but at the end is a configuration file entry that might be simple to fix (or not): /usr/libexec/cups/filter/pstocupsraster failed | Apple Support Communities

Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can

Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.

The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory.

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any help

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

I get the following error when trying to user Show & Share (HTTP Status 500)

I get the following error when I try to use Show and Share.   I have cycled the power on the server but still the same message.
How can I correct this?
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: java.lang.NullPointerException
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:541)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:435)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:378)
     org.springframework.security.intercept.web.FilterSecurityInterceptor.invoke(FilterSecurityInterceptor.java:109)
     org.springframework.security.intercept.web.FilterSecurityInterceptor.doFilter(FilterSecurityInterceptor.java:83)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     com.cisco.vportal.services.security.VPAnonFilter.doFilter(VPAnonFilter.java:51)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     org.springframework.security.ui.ExceptionTranslationFilter.doFilterHttp(ExceptionTranslationFilter.java:101)
     org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     org.springframework.security.wrapper.SecurityContextHolderAwareRequestFilter.doFilterHttp(SecurityContextHolderAwareRequestFilter.java:91)
     org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     org.springframework.security.context.HttpSessionContextIntegrationFilter.doFilterHttp(HttpSessionContextIntegrationFilter.java:235)
     org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     org.springframework.security.securechannel.ChannelProcessingFilter.doFilterHttp(ChannelProcessingFilter.java:116)
     org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     org.springframework.security.util.FilterChainProxy.doFilter(FilterChainProxy.java:175)
     org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:237)
     org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:167)
root cause
java.lang.NullPointerException
     org.apache.jsp.login_jsp._jspService(login_jsp.java:1002)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:378)
     org.springframework.security.intercept.web.FilterSecurityInterceptor.invoke(FilterSecurityInterceptor.java:109)
     org.springframework.security.intercept.web.FilterSecurityInterceptor.doFilter(FilterSecurityInterceptor.java:83)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     com.cisco.vportal.services.security.VPAnonFilter.doFilter(VPAnonFilter.java:51)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     org.springframework.security.ui.ExceptionTranslationFilter.doFilterHttp(ExceptionTranslationFilter.java:101)
     org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     org.springframework.security.wrapper.SecurityContextHolderAwareRequestFilter.doFilterHttp(SecurityContextHolderAwareRequestFilter.java:91)
     org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     org.springframework.security.context.HttpSessionContextIntegrationFilter.doFilterHttp(HttpSessionContextIntegrationFilter.java:235)
     org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     org.springframework.security.securechannel.ChannelProcessingFilter.doFilterHttp(ChannelProcessingFilter.java:116)
     org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
     org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
     org.springframework.security.util.FilterChainProxy.doFilter(FilterChainProxy.java:175)
     org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:237)
     org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:167)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.14 logs.
Apache Tomcat/6.0.14

Good morning,
Please, open a TAC service request to have this investigated further.
When you do, please, attach the exact steps you follow to get this error, as well as a sysreport from the Show and Share appliance.
Also, it would be good to confirm whether other users are also seeing the same error or not.
Regards
Daniel

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
My OS is Windows Vista and using Internet Explorer

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
My OS is Windows Vista and using Internet Explorer

Why am I getting the 404 error when on pinterest?

Why am I getting the 404 error when on pinterest? This is happening on my iMac and macbook.
I have tried to clear my history, tried in safari and in firefox, enabled and disabled Javascript, and allowed 3rd party sites.
Please help!!

No you are not alone. I tried to create an apple ID and then access the app store and itunes and got the same error code. Spoke with tech support for over 45 minutes and we tried everything. Tech support seemed to think that it had something to do with credit card registration. Suggested that I use a different credit card. I modified my account settings with a different card and still had the same errors. At this time I have no confidence that Apple has any idea what the problem is.

Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

I get the following error when formatting a external hard drive. Partition failed with the error: POSIX reports: The operation couldn't be completed. Cannot allocate memory

I get the following error when formatting a external hard drive.
Partition failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
Is there any fixes?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

I am getting the following error when i am trying to check in new created content profile

Hi All,
I am getting the following error when i am trying to check in new created content profile as:
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,weblogic,localhost:16200!$!csServiceDataException,CHECKIN_NEW_SUB,validateStandard!$!syParameterNotFound,dDocTitle
intradoc.common.ServiceException: !csServiceDataException,CHECKIN_NEW_SUB,validateStandard!$
*ScriptStack CHECKIN_NEW_SUB
3:doScriptableAction,**no captured values**3:doSubService,**no captured values**CHECKIN_NEW_SUB,**no captured values**3:validateStandard,dDocName=myucm-005202
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.Service.createServiceException(Service.java:2249)
at intradoc.server.ServiceRequestImplementor.handleActionException(ServiceRequestImplementor.java:1766)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1716)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
at intradoc.server.Service.doActions(Service.java:472)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1322)
at intradoc.server.Service.executeSubServiceCode(Service.java:3866)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:1200)
at intradoc.server.Service.executeServiceEx(Service.java:3861)
at intradoc.server.Service.executeService(Service.java:3845)
at intradoc.server.Service.doSubService(Service.java:3760)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
at intradoc.server.Service.doCodeEx(Service.java:550)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.Service.doScriptableAction(Service.java:3807)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
at intradoc.server.Service.doCodeEx(Service.java:550)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
at intradoc.server.Service.doActions(Service.java:472)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
at intradoc.server.Service.executeActions(Service.java:458)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1343)
at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1715)
at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:222)
at sun.reflect.GeneratedMethodAccessor133.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1600)
at idcservlet.IdcFilter.doFilter(IdcFilter.java:352)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: intradoc.data.DataException: !syParameterNotFound,dDocTitle
at intradoc.data.DataBinder.getEx(DataBinder.java:1251)
at intradoc.data.DataBinder.get(DataBinder.java:1050)
at intradoc.server.DocServiceHandler.validateStandard(DocServiceHandler.java:1257)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:533)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
... 79 more

Your error states:
!syParameterNotFound,dDocTitle
Can you confirm that your profile includes all required data, specifically, the dDocTitle? Fix this issue, then re-check your logs. if there are other missing required parameters, fix each one.
Eventually, you should have a successful check-in.
Hope this helps,
-ryan

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

Try going back to a restore point > System Restore - Microsoft Windows

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

Get the following error when trying to sync itunes to Nano itunes could not coppy " Song" to the ipod because unknown error occurred (-5000). Any ideas?

Get the following error when trying to sync itunes to Nano itunes could not coppy " Song" to the ipod because unknown error occurred (-5000). Any ideas?

Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
tt2

Getting the -18001 error when using TestStandLVRTS

Similar Messages

Maybe you are looking for