Getting the Datatype error data into a table or file

Hi experts,
I have a scenario where I need to capture the datatype mismatch records between source & target or the data length error records into a table or file.
For example.
1. I have source table column of datatype varchar which is mapped to a target table column of datatype Integer.
2. I have source table column of datatype varchar2(2000) is mapped to a target table column of datatype varchar2(200).
I know that while interface execution, if any of the above scenario comes an error occurs respectively and execution stops.
My question is whether is there anyway to capture those types of records and insert into a table or file. If yes kindly suggest me how to do it.
Thanks in advance

Hi Siva,
Use SqlUnload tool to capture error out records in excel file.
Hope this will helps you
Thanks,
Phani

Similar Messages

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox

How to Get the Previous Transactional Data into Special Purpose Ledger

Hi,
1). We have implemented Special Purpose Ledger. After implementing SPL, we are generating documents and getting the postings into SPL. Now I need to bring the previous postings which were entered before Special Purpose Ledger Setup. Please Help me on how to bring the transacctional data into Special Purpose Ledger.
2). Is it possible to define A/R Aging by Customers? in Special Purpose Ledger by using Report Painter?
3). What is the use of Allocation Cycles like Assessment and Distribution in Special Purpose Ledger?
Please clarify me on above 3 points.
Thanks
Yadayya
Edited by: Dogdays on Aug 5, 2011 8:02 AM
Edited by: Dogdays on Aug 5, 2011 8:03 AM

I have experience in intergrating project accounting to the general ledger in a data warehouse using discoverer to show the results.
The solution I developed for my compnay is to ensure all entries from all sub-ledgers including manual journal entries are moved to the data warehouse tables have project information based on PA autoaccounting rules.
The company I work for was interested in viewing reports that cubed cost centers (dept's.) to projects and to translate all entries (not just account balances) to USD for thier foriegn set of books. So, projects can be seen company wide in USD at lowest entry level. The solution I gave them solved the problem and they are able to view reports and evaluate costs by cost centers and projects on an enterprise wide application.
If this is what you are looking for let me know.
about my self : I have a B.S. in Computer Science (Theoretical Track) and 17 yrs of accounting and book keeping experience including consolidation and multi-currency sets of books.

Getting the following error when creating a table in the webdynpro project

hello colleagues,
I am able to navigate to a view from the initial view because in the second view I am having a table.
It throws the following error while navigating
500 Internal Server Error
The initial exception that caused the request to fail, was:
java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/clientserver/uielib/standard/api/IWDAbstractTableColumn
The address is http://inld50044442a:50000/webdynpro/dispatcher/local/JA310_Ex_01/ExApp1
Please help me. I am new to WebDynpro.
Thanks in advance
Regards,
Sheelsagar

Perhaps you have build your application with a NW04s IDE and try to run it on a NW04 server?
the mentioned class (actually, interface) is part of WD NW04s functionality

Insert the MDX Query Data into SSMS Table

Hi, I'm using below query frequently on SSAS .
select * from $system.discover_commands
I want that when this query executed & If any output returns , then that output should be inserted into SSMS
Table(OLTP DB) .

Hello,
You can use a linked server to SSAS to run queries from SQL Server against SSAS cubes and to insert the result into a relational table.
See e.g.:
Passing Queries from SQL Server to a Linked Analysis Server
Querying SSAS with SQL
Creating a Linked Server for Analysis Services
Olaf Helper
[ Blog] [ Xing] [ MVP]

Help Please!!! I get the following error message when attempting to download files.

I get this message each time I try to download a file. my system tells me that Adobe Reader is up to date. What should I do?
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other

Hello Graffiti,
I am not using a Mac I am using a Laptop with Window 7 OS, I have also tried to download from my PC which has Windows 7 OS I get the same message from both. I am however using Chrome browser, could that be the issue?
Ms. Norma D. Maddox

URGENT: how to get the database error message into application?

Hi, pls give some idea:
For example, the database is MS Access. When insertion failed, the getMessage() method of SQLException will print "General error", while the log file created by ODBC will be "[MICROSOFT][ODBC DRIVER]column ID no found in student table"(...just a example).
So, how to get this message in our application?

instead of using the getMessage method, have you tried something like this:
         try {
         } catch (Throwable t1) {
            System.out.println(t1.toString());
         }If that still doesn't work, you can always redirect the log entries into a textarea but then everything that appears in the log file will be redirected!
;o)
V.V.

CLR to get the SQL Server Data into .CSV File

Hi,
I transformed 10 columns 1000 rows from the source table to 1 column 1000 rows in the destination table by making the comma separated columns ( Just like ..
Insert into DestinationTable
SELECT col1+','+col2 ....
FROM SourceTable
Then I want to take this column into CSV file.
I dont have the rights to command shell.
I heard that we may use CLR procedure for this. Can someone throw light?

using System;
using System.IOM
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
public class ExportFileClass {
[Microsoft.SqlServer.Server.SqlProcedure]
public static void export_file()
using (SqlConnection connection = new SqlConnection(
"context connection=true"))
connection.Open();
// Operation to open file goes here.
SqlCommand command = new SqlCommand("SELECT col FROM YourTable");
// Consume result set and write rows.
Build this from the command line:
sn -k keypair.snk
csc /target:library /keyfile:keypair.snk exportfile.cs
Then run in SQL Server (assuming that the files are in C:\temp on the SQL
Server machine:
[sql]
USE master
go
-- To be able to create an external-access assembly, we need to load
-- the key, the assembly is signed with. The key needs a password, but we
-- don't need to know the password.
DECLARE @sql nvarchar(MAX),
@password char(40)
SELECT @password = convert(char(36), newid()) + 'Ab4?'
SELECT @sql = 'CREATE ASYMMETRIC KEY slog_loopback FROM FILE = ' +
'''C:\temp\keypair.snk'' ' +
'ENCRYPTION BY PASSWORD = ''' + @password + ''''
PRINT @sql
EXEC(@sql)
-- And then a login to carry the permission.
CREATE LOGIN exportfile$asymkey FROM ASYMMETRIC KEY ExportFile
GRANT EXTERNAL ACCESS ASSEMBLY TO exportfile$asymkey
go
-- Now we can go back to our regular database and create the assembly.
USE youddatabase
go
CREATE ASSEMBLY ExportFile FROM 'C:\temp\exportfile.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS
go
CREATE PROCEDURE ExportFile AS
EXTERNAL NAME ExportFile.ExportFileClass.export_file
[sql]
It is likely that you will have to do ask your DBA to do things in the
master database.
Erland Sommarskog, SQL Server MVP, [email protected]

TS1372 Doesn't work. I've tried all steps twice. I'm still getting the "1430 Error Data is corrupted" message. Any other ideas?

The last time I synchronized my iPod Classic, everything looked normal. I could see all my new songs were copied down to my iPod. When I used my iPod after that, it showed no movies or music files. I tried synchronizing it again, iTunes showed a "Restore your iPod" message, I did. When I plugged it back again, iTunes said my iPod was 'damaged'. After searching for online help, I only got the http://support.apple.com/kb/TS1372?viewlocale=en_US&locale=en_US steps to restore it. I tried all steps possible twice.
I bought my iPod two months ago (late December, 2012) I own a MacBook Pro, and my operating system is Mac OS X 10.6.8, I downloaded the latest version of iTunes as well. Please help. I'm desperate.

The last time I synchronized my iPod Classic, everything looked normal. I could see all my new songs were copied down to my iPod. When I used my iPod after that, it showed no movies or music files. I tried synchronizing it again, iTunes showed a "Restore your iPod" message, I did. When I plugged it back again, iTunes said my iPod was 'damaged'. After searching for online help, I only got the http://support.apple.com/kb/TS1372?viewlocale=en_US&locale=en_US steps to restore it. I tried all steps possible twice.
I bought my iPod two months ago (late December, 2012) I own a MacBook Pro, and my operating system is Mac OS X 10.6.8, I downloaded the latest version of iTunes as well. Please help. I'm desperate.

Error inserting CLOB data into xmltype table on Solaris 8 Oracle 9.2.0.1.0

Hi all,
I have a table t of type xmltype.
I have a function getData which parses an XML file and returns the CLOB data.
I have a statement as
"insert into t values(xmltype(getData('abc.xml')));"
I get the following error
ERROR at line 1:
ORA-00600: internal error code, arguments: [17177], [0x0], [], [], [], [], [],
ORA-31011: XML parsing failed
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at line 1
ORA-06512: at "ADAPT.AP_CREATE_INSP_LOAD", line 57
ORA-06512: at line 1
At line 57 I have the above mentioned "insert into..." statement.
Can anybody tell me what can be the problem.
Interestingly enough, the same things work on same Oracle version on Windows 2k, Windows 2k3, another Solaris 8 machine.
Please help asap as I am in fire fighting mode.
Thanks & Regards,
Aniruddha Deshpande

Hi Aniruddha
I think you need to post to a db forum rather than XMLP.
Tim

Insert the data into two tables at a time.

Hi ,
i have these two tables
create table [dbo].[test1](
[test1_id] [int] identity(1,1) primary key,
[test2_id] [int] not null
create table [dbo].[test2](
[test2_id] [int] identity(1,1) primary key,
[test1_id] [int] not null
alter table [dbo].[test1]
add constraint [fk_test1_test2_id] foreign key([test2_id])
references [dbo].[test2] ([test2_id])
alter table [dbo].[test2] add constraint [fk_test2_test2_id] foreign key([test1_id])
references [dbo].[test1] ([test1_id])
I want to insert the data into two tables in one insert statement. How can i do this using T-SQL ?
Thanks in advance.

You can INSERT into both tables within one Transaction but not in one statement. By the way, you would need to alter your dbo.Test1 table to allow null for first INSERT test2_id column
See sample code below:
CREATE TABLE #test1(test1_ID INT IDENTITY(1,1),test2_id INT NULL)
CREATE TABLE #test2(test2_ID INT IDENTITY(1,1),test1_ID INT)
DECLARE @Test1dentity INT
DECLARE @Test2dentity INT
BEGIN TRAN
-- Insert NULL as test2_ID value is unknown
INSERT INTO #test1(test2_ID)
SELECT NULL;
-- get inserted identity value
SET @Test1dentity = SCOPE_IDENTITY();
INSERT INTO #test2(test1_ID)
SELECT @Test1dentity;
-- get inserted identity value
SET @Test2dentity = SCOPE_IDENTITY();
-- Update test1 table
UPDATE #test1
SET test2_ID = @Test2dentity
WHERE test1_ID = @Test1dentity;
COMMIT
SELECT * FROM #test1;
SELECT * FROM #test2;
-- Drop temp tables
IF OBJECT_ID('tempdb..#test1') IS NOT NULL
BEGIN
DROP TABLE #test1
END
IF OBJECT_ID('tempdb..#test2') IS NOT NULL
BEGIN
DROP TABLE #test2
END
web: www.ronnierahman.com

When I attempt to sych with I tunes I get the following Error Message. "Itunes was unable to load data class information from synch services. Reconnect or try again later." How do I fix this? This started happening after I updated to the latest version

When I attmpt to synch my Iphone I get the following error message. "Itunes was unable to load data class informationfrom synch services. Reconnect or try again later. This started after I uddated to the latest version of Itunes. What should I do?

My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade.
Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down. Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
Still: Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?! Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake).
**banging head on table**

I want to use the SQL Toolkit of NI and SQL Server as my databasis on a server. Do I need to install a client in each computer I want to handle the data into SQL tables or I need only a ODBC driver?

I want to use the SQL Toolkit of NI and SQL Server as my databasis on a server. Do I need to install a client in each computer I want to handle the data into SQL tables or I need only a ODBC driver?

You only need the ODBC driver on each computer. If you are distributing the SQL Toolkit app as an executable and do not install the whole toolkit on each computer, you'll need the SQL Toolkit support files. This is about a dozen files. You can get the list at http://digital.ni.com/public.nsf/websearch/b814be005f9da9258625658700550c75?OpenDocument.

To upload a data into SAP Table with the help of RFC function in BODS

Hi,
Please provide me step-by-step solution to upload data into any SAP table with the help of RFC function in Data Services.
I have created RFC function that upload data into SAP table. RFC Function contains one table that has same structure as my database table.
In the data services how can i filled the table of RFC function, i am using this function in query transform of data services but it gives me error.
I am also follow link http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsDataServicesTipsand+Tricks
but it did not help me.
Thanks,
Abhishek

Hi Abhishek,
Did you import the function module in the SAP datastore first? When you open the SAP datastore, the function should be listed in the 'functions' section. If not, import it. Make sure your function is remote executable.
Once the function is there, you can use it in a transformation. In 'Schema Out' right-click on 'Query' (top level) and choose 'New Function Call'. You can then select a datastore and a function in the datastore. The wizard will show you which output parameters are available. I believe you have to add at least one and can select as many as you like.
After confirming your selection the function and the output parameters appear in Schema Out. You can then right-click on the function and choose 'Modify function call'. A popup will appear where you can specify the input parameters.
I hope this helps.
Jan.

How to convert the flat file data into sap tables . ?

how to upload flat file data into sap table . before upload mapping is also there in some filds . any one can give me some steps how to upload and mapping . ?

Hi
See the sample code
REPORT zmmupload.
Internal Table for Upload Data
DATA: i_mara like MARA occurs 0 with header line
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
    EXPORTING
      filename                = p_file
      filetype                = 'DAT'
    TABLES
      data_tab                = i_mara
    EXCEPTIONS
      conversion_error        = 1
      invalid_table_width     = 2
      invalid_type            = 3
      no_batch                = 4
      unknown_error           = 5
      gui_refuse_filetransfer = 6
      OTHERS                  = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Upload the Data from Internal Table
MODIFY MARA from TABLE i_MARA.
Regards
Anji.

Getting the Datatype error data into a table or file

Similar Messages

Maybe you are looking for