Getting the default browser+MIME data

I want to ask : how to get the current system default browser by java code at runtime (IE,firefox,...)? and how to get its specific version ? also how to get the supported MIME type of that browser also by java code?
this is intended to be part of a network agent by java.
thanks

Hi
You can use a GPO:
1. Open the Start menu, go into the "Administrative Tools" folder and select "Group Policy Management."
2.     Right-click on your primary Group Policy Object from the list on the left side of the window and choose the               "Edit" option. This will launch the Group Policy Object Editor tool.
3.     Open the "User Configuration" and "Windows Settings" folders.
4.     Right-click on the entry labeled "Internet Explorer Maintenance" and select "Preference Mode."
5.     Double-click on the "Programs (Preference Mode)" icon to view the additional Internet Explorer settings.
6.     Click on the radio button next to "Import the Current Program Settings" and then press "Modify Settings."
7.     Click on the "Make Default" button in the "Default web browser" section of the window.
8.     Press "OK" twice to save the Group Policy Object settings. Now Internet Explorer will automatically be the                 default browser for all computers on the local network.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I dont have the "Internet Explorer Maintenance" section. 
http://msdn.microsoft.com/en-us/library/dn338129.aspx

Similar Messages

  • If Firefox is set as the default browser, and any application attempts to open a new window, this fails and I get the error "Firefox is already running..."

    Here is what I am running:
    Microsoft Windows 7, Service Pack 1, Fully updated to 4/10/2012
    Fresh Install of Firefox 11. No add-ons enabled as a result of troubleshooting.
    I am a user with administrator rights
    UAS is disabled.
    To begin, this has been going on Since Firefox 10 or so. A few months now.
    I am able to open Firefox. My add-ons worked (ABP, Flashblock, ABP Element Hiding Helper, IETAB2, Downthemall, Greasemonkey, 4chan extension) had no problems. Firefox is set and has been set for the last two years as my default web browser.
    However Since approximately Firefox 10 or so, maybe before that, If I have a Firefox session open, and any other application attempts to open a session in a new window, I get the Firefox is already running, but not responding error."
    I attempted to follow troubleshooting advice already posted (look for parent.lock files left behind [none present], multiple sessionstore.js files [none present], create a new user profile, attempted to clear out the "read-only" permission in windows 7, however as soon as it is cleared, the read only permission returns.)
    As a last resort, I deleted the Firefox folder, the %APPDATA%/Mozilla directory in its entirety, then utilized CCleaner to remove any and all references to Firefox in the windows registry, then did a full re-install, no extensions installed right now.
    I checked preferences and have the option "open new windows in a new tab" checked off. The problem persists regardless if this option is checked on or off. This problem persists in or out of safe mode, even with the brand new install.
    Test Cases:
    All cases:
    Firefox is selected as the default browser for windows 7
    Case 1: Open a firefox session. Utilize any other program that attempts to open a link to their website in a new browser window or new browser session. Experience "Firefox is already running" error
    Case 2: Open a firefox session. Right click on Firefox on the task bar. Select "open in new window". Experience "Firefox is already running" error
    Case 3: Open a firefox session. Select the Firefox Menu > New tab > New Window. A new window will actually open.
    This is the only method of opening a new window in the same browser session or profile that actually works on my system. Attempting to open a browser session from the task bar "open new window dialog" or opening a new window while a current window/session is running will not open firefox in a new window or a new tab in the current session. The "Firefox is already running, but is not responding" error will occur every time.

    Cor-el's suggestion resolved my problem. Apparently the MOZ_NO_REMOTE variable was set to 1 on my system variables. I never made it, and really have no idea how it got there, but deleting this variable and restarting firefox has resolved the issue. Thanks Cor-el!
    Marking case: Solved
    Solution: Verify the MOZ_NO_REMOTE variable is NOT set to 1. This can be achieved by simply deleting this variable.

  • I get the "Fast Browser Plugin not loaded" message every time i run  safari and I can't find an MTWB folder anywhere on my hard drive?

    I get the "Fast Browser Plugin not loaded" message every time I run  Safari and I can't find an MTWB folder anywhere on my hard drive?  This doesn't seem to be causing a problem, but is a puzzle?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD  com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • How do I get the default Photostream on my MacBook Pro to match the Photostream on my iPhone and iPad?

    Essentially, I am having issues getting photos that I save on my iPhone or iPad to automatically appear on my MacBook's iPhoto app (and vice versa). The iPad and iPhone automatically share all photos between each other. I have iCloud set up and all of the photo sharing options selected on all devices, so that's not the issue. I used a bit of a workaround and created and shared a custom stream, which ultimately works. However, it involves a lot of moving photos around on all three devices, so I'd like to get the Photostream service working the way it's intended by getting the default Photostream connected to my iCloud account automatically syncing among all three devices.
    Thanks.

    Photos are kept in the My Photo Stream for 30 days or until more than 1000 have been added.  The photos will remain in the MPS for longer than 30 days if the 1000 limit is not reached.
    However, depending on when a device joined the iCloud feature and started receiving the MPS it will not see any that were added more than 30 days from the date of joining.  So if your MBP signed into iCloud and the MPS feature later than the other 2 devices it will not see photos that they might.  Also if you've turned off My Photo Stream on the MPB and then added it back it will only see the last 30 days worth.

  • Get the month from a date column with the calculated column

    I am trying to get the month from a date field with the help of calculated column. However I get this syntax error whenever I want to submit the formula:
    Error 
    The formula contains a syntax error or is not supported. 
    the default language of our site is German and [datum, von] is a date field.

    Hi,
    I have created two columns
    Current MM-YY
    Calculated (calculation based on other columns)
    Today
    Date and Time
    Current MM-YY is calculated value with formula as
    =TEXT(Today,"mmmm")
    But the output shows as December instead of May.
    I have tried =TEXT([Datum, von];"mmmm") but no help.
    I am trying to populated the column automatically with current month..ex: if its May the field should show May, next month it should show June an so on.
    Any kind help is grateful.
    Regards,
    Pradeep

  • How to open a URL in the default browser via CC HTML Extension?

    Hi,
    I'm trying to open a link via the default browser in a HTML Extension for Photoshop CC built with Extension Builder 3.
    With the initial example the "/indext.html" it look like this:
    <li><button class="default" id="btn_PHXS" onClick="onClickButton('PHXS')" disabled="true">Run ps code</button></li>
    and I changed the code from "/ext.js" to:
    ...function onClickButton(ppid) {    var csInterface = new CSInterface();    csInterface.openURLInDefaultBrowser('http://www.adobe.com');}...
    This is what the "/lib/CSInterface-4.0.0.js" looks like:
    * Opens a page in the default system browser.
    * @param url   The URL of the page to open. Must use HTTP or HTTPS protocol.
    * @return One of these error codes:\n
    *      <ul>\n
    *          <li>NO_ERROR - 0</li>\n
    *          <li>ERR_UNKNOWN - 1</li>\n
    *          <li>ERR_INVALID_PARAMS - 2</li>\n
    *          <li>ERR_INVALID_URL - 201</li>\n
    *      </ul>\n
    CSInterface.prototype.openURLInDefaultBrowser = function(url)
        return cep.util.openURLInDefaultBrowser(url);
    Since "util" doesn't seem to be defined  I get the message:
    Uncaught TypeError: Cannot call method 'openURLInDefaultBrowser' of undefined
    Is the something missing?
    Thx,
    frankin

    Hi Franklin,
    Apologies for the delay but I have been trying to determine why this API is not been working. I have since discovered that, although this API is documented in the JS library, the behaviour has yet to be implemented into Photoshop CC. Offline I will try to determine why this API was included in the library when it was not ready but for the meantime, if you would like to open a browser, here is a workaround:
    Instead of using:
    //(new CSInterface).openURLInDefaultBrowser("http://www.adobe.com")
    // Use the createProcess API to open a browser. The following shows a workflow in Windows to open Internet Explorer.  
    var csInterface = new CSInterface();
    var rootDir = "/";
    var isWindows = window.navigator.platform.toLowerCase().indexOf("win") > -1;
    if (isWindows) {
                        rootDir = csInterface.getSystemPath(SystemPath.COMMON_FILES).substring(0, 3);
    var processPath = "/usr/bin/open";
      if (isWindows) {
        processPath = rootDir + "Windows/explorer.exe";
    var url = "http://www.adobe.com";
    window.cep.process.createProcess(processPath, url);
    Apologies for this inconvenience but we promise to keep you informed when openURLInDefaultBrowser API is fully supported.
    Kind regards,
    Lea

  • How do you make Firefox the default browser when the normal way doesnt work?

    Im trying completely from chrome after a friend showed my how much firefox has got its act together. However i cant for the life of me set it as the default browser. I have tried the "make firefox the default browser" button in firefox, which simply opens the windows default programs panel. Whenever i try to use the panel it simply sets the http protocol to nightly which isnt even installed!( http://puu.sh/2vJHM ) I think a possible fix would be to manually change the registry, but i wouldnt know where to start.

    Did you check the box on ''Options > Advanced > General >[X] "Always check to see if Firefox is the default browser on startup"?
    Have you restarted Firefox and if so, or when you do so, what does that section on the advanced Firefox options show?
    Have you tried restarting your system after setting the default browser using the second suggestion and, after restart, check the setting per the second suggestion to see if that setting is holding?
    Updating your Plugins would have no affect on the default browser question. It was something that you needed to do to avoid security issues online by using an out of date version of Java. Java is not involved in the default browser issue. That is why I separated it from the first part of the reply with a line and began with the word "Other".

  • Java Web Start and IE6 as the default browser on win2k

    Hi,
    I need to access web pages from my java web start app. These pages are on the save server and the same webapp context as the jsp page to launch the web start app, and are protected.
    I have tried with basic auth and servlet filter with cookie to control the access to the web server. When I need to access web server resource from web start app, I create the URL to the page I want to access, set the auth header or cookie and call the web start BasicService to open it in the default browser.
    With Netscape 4/7 or Firefox as the default browser, I have no problem to send the auth header or cookie from the web start app to the webserver for security checking and get access to the resource on the server.
    But it seems not woking when IE is set to be the default browser. I am always asked for userid/password if I use basic auth; or redirected to the login page if I use servlet filter and cookie.
    If anybody knows a solution for this IE dfficulity, could you please share it?
    harry

    How did you even get k9 on your iPad...it does not show up in my iTunes apps? So I
    Had to download it on my computer ...transfer it to my iPad... Now it's in my Dropbox
    On the iPad...but I can't figure out how to install it from here......I want a browser on my
    iPad that ihas parental controls...I see quite a few should be in the iTunes store..even
    Firefox....but not a one show up in my iTunes app store?????

  • Making Opera Mini The Default Browser..

    As the title sudjest is there such a way to make this the default browser? I looked in the settingd but only found hotspot and the main bb browser?????
    Don't forget to check your cinch!

    Hoping this link will work; if it does, vote for it...to get YOUR wish come true (AND TELL YOUR FRIENDS to vote for it also, aight)!!!
    http://productideas.appspot.com/#8/e=cf (THE Web Browsing topic/LINK@LEFT!)
    I went ahead and above link didn't work unless the orig poster logged in and I Googled it but that also didn't work ( http://google.com/search?num=100&safe=off&q=productideas.appspot.com+clicking+any+link+in+google+sea... ), so best thing i can think of is give you this answer i got here:
    http://supportforums.blackberry.com/t5/BlackBerry-Curve-BlackBerry-8900/setup-emails-through-web-UNl...

  • How do I change the default browser from Firefox to MS Internet Browser?

    I selected Firefox as my default browser and would like to return to MS Explorer.
    == Changed from MS to Firefox, now cannot get it back.

    Control Panel > Internet Options: Programs
    Put a check in the box next to 'Internet Explorer should check to see whether it is the default browser'
    Start IE and let IE make itself the default browser.
    Start > Default Programs > Set program access and computer defaults
    Control Panel > Programs > Default Programs > Set program access and computer defaults

  • How do I change the default browser

    Can anyone tell me how I change the default browser which is invoked when I run a web application from Jdev3.1(under NT 4.0). When I run main.jsp from the JDev interface, it invokes IE 5.5. But, I want it to invoke and the application on Netscape 4.6. I don't know if it's the NT registry, but I wanted to make sure w/the experts before I temper w/the registry settings.
    Thanks!
    A

    Alan,
    You got me started on this.
    Unfortunately, IE also messed up my browser,
    HTM file descriptions (MS...HTML...)
    and the HTML file icons and ...
    Any how, I also want to make Netscape my default, so I searched and I found this:
    http://home.netscape.com/download/win32_instructions.html
    This is as simple as it gets.
    -John
    null

  • Stagewebview is not using the default browser?

    Hello community,
    We encounter an issue regarding the userAgent we get with Javascript when our page is viewed from an Android App running Air and using the Stagewebview.
    We noticed that despite the default browser set as Google Chrome (Webkit v.537), we identify that app using Webkit v.534.
    After a lot of trouble shooting, it seems that there is a difference between "native" browser and "default" browser.
    Is that correct?
    If so, the question is: Is there a way to make Stagewebview use the user selected browser/engine ?
    Our website needs to display text vertically (japanese text) and the form elements are not well recognized in the 534 version browser, but work perfectly in the last version of Chrome we can get running on those devices.
    (We target Android 4.2+ users)
    Any input will be appreciated.
    Cedric Simon

    Hello ArkadiuszOkoń,
    I downloaded the 4.4W sdk and replaced the file as proposed, but I don't notice any change.
    On Desktop, I can see that Air webkit 533 is used. did my compile really took the new file into configuration?
    I'm using FlashDevelop, are there settings to change in the bat fie or in the manifest?
    As you proposed about the <uses-sdk> settings, some are already setup and I didn' change them, should I higher the minSdkVersion for example?
    Here is the current section:
      <android>
        <manifestAdditions><![CDATA[<manifest android:installLocation="auto">
      <uses-sdk android:minSdkVersion="8" />
      <uses-permission android:name="android.permission.INTERNET" />
      <uses-feature android:required="true" android:name="android.hardware.touchscreen.multitouch" />
    </manifest>]]></manifestAdditions>
      </android>
    Also, Jan-F-W, thank you for your proposal,
    I should explain something else:
    The app is using "stagewebviewbridge" package that one can find here : stagewebviewbridge -  Extend Adobe AIR StageWebView ( Desktop, iOS, Android ) - Google Project Hosting
    We do not have access to the source code of that app, but we have to investigate the case and propose a solution otherwise the development company in charge will not make a single move.
    So I created a sample application that loads a page on my machine and that displays the userAgent to check what engine is running.
    (in that case, I can use a StageWebView directly if I want)
    I can see that depending on the useNative boolean parameter of StageWebView I get a different userAgent, which is great.
    BUT, I had a doubt on mobile, as stated by Adobe Documentation: This parameter is ignored on mobile.
    In doubt, I checked on the mobile device, and in both base, the device "native" browser is used, not the Chrome set as "default".
    Maybe my tests are not accurate enough? I'm not a flash developer, so I feel a bit lost there.
    Thank you for your guidance.

  • Make Firefox portable the default browser

    make Firefox portable the default browser

    I've escalated your question (which I read as how to deploy Firefox ESR to the users in your organization so that it automatically gets set as the default browser) to see if the Mozilla Helpdesk can get an answer for you. This may take up to 72 hours.
    You could also check the [http://www.mozilla.org/en-US/firefox/organizations/faq/ Firefox ESR FAQ page] or try the [https://mail.mozilla.org/listinfo/enterprise Enterprise Working Group (EWG) mailing list]. Both are linked from this overview of Firefox ESR (Extended Support Release) for organizations:
    *http://www.mozilla.org/en-US/firefox/organizations/

  • Setting the default browser

    I'm trying to set the default browser as `chromium`.
    In `.xinitrc` I have:
    ~~~
    # Sets browser.                                                                                                                                                   
    if [ -n "$DISPLAY" ]; then                                                                                                                                         
        export BROWSER=chromium                                                                                                                                       
    fi
    ~~~
    Anyway, `skype` open any link in `opera`.

    As always find it on the wiki: https://wiki.archlinux.org/index.php/De … plications
    That said i prefer setting the default applications with 'mimi' , because it is simpler.
    https://github.com/taylorchu/mimi
    AUR Page       : https://aur.archlinux.org/packages.php?ID=56438
    Last edited by teateawhy (2013-01-08 16:01:29)

  • How do you invoke the default browser for Unix/OSX

    Does anyone know how to programmatically display the contents of a URL in the default browser for a Unix system? I found a javaworld article on doing this using Runtime.getRuntime().exec(cmd). The article gives the cmd string for invoking the default browser in Windows, and for invoking the Netscape browser in Unix.
    This can easily be extended to invoke any known browser executable in a known path on a Unix system; but I'd like to invoke the default browser without knowing what or where it is. I'm specifically targetting Mac/OSX, but any Unix solution is worth trying.
    Is there a Unix command for launching the default browser to display the contents of a given URL? Or is there an alternative approach, rather than invoking Runtime.exec()?
    -Mark

    After extensive google searching, I came across a partial solution. This code detects the default browser on a Mac, and provides an elegant solution for trying standard browsers in turn for other Unix systems. I tested it on WIndows XP and Mac OSX 3.9, and it detected the default browser each time. A suped up version of this tool is available as a SourceForge project. You can find it here:
    http://sourceforge.net/projects/browserlaunch2/
    Here's the simplified code:
    //  Bare Bones Browser Launch                          //
    //  Version 1.5                                        //
    //  December 10, 2005                                  //
    //  Supports: Mac OS X, GNU/Linux, Unix, Windows XP    //
    //  Example Usage:                                     //
    //     String url = "http://www.centerkey.com/";       //
    //     BareBonesBrowserLaunch.openURL(url);            //
    //  Public Domain Software -- Free to Use as You Like  //
    import java.lang.reflect.Method;
    import javax.swing.JOptionPane;
    public class BareBonesBrowserLaunch {
       private static final String errMsg = "Error attempting to launch web browser";
       public static void openURL(String url) {
          String osName = System.getProperty("os.name");
          try {
             if (osName.startsWith("Mac OS")) {
                Class fileMgr = Class.forName("com.apple.eio.FileManager");
                Method openURL = fileMgr.getDeclaredMethod("openURL",
                   new Class[] {String.class});
                openURL.invoke(null, new Object[] {url});
             else if (osName.startsWith("Windows"))
                Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + url);
             else { //assume Unix or Linux
                String[] browsers = {
                   "firefox", "opera", "konqueror", "epiphany", "mozilla", "netscape" };
                String browser = null;
                for (int count = 0; count < browsers.length && browser == null; count++)
                   if (Runtime.getRuntime().exec(
                         new String[] {"which", browsers[count]}).waitFor() == 0)
                      browser = browsers[count];
                if (browser == null)
                   throw new Exception("Could not find web browser");
                else
                   Runtime.getRuntime().exec(new String[] {browser, url});
          catch (Exception e) {
             JOptionPane.showMessageDialog(null, errMsg + ":\n" + e.getLocalizedMessage());
       }

Maybe you are looking for

  • What is the Oracle equivalent of the Microsoft Access FIRST function?

    Using: Oracle 10gR2 RAC on SUSE Linux 9 (10.2.0.3) In the process of converting a Microsoft Access database to Oracle, an Access query is using the FIRST function. What is the Oracle equivalent of the Microsoft Access FIRST function? In the attempt t

  • Mac Mini Newbie seeks LCD Display Info

    Hi Am about to purchase a Mac Mini. Wondering if I can utilise an LCD TV as my display rather than pay out for an Apple Display? What Max Resolution will I achieve? Will it be comparable to an Apple Display? Any other advice from people whom have don

  • Fireworks as default app for jpg files

    I was able to configure Fireworks to be the defaul app for jpgs - and when I click on a jpg file in my file manager, - Fireworks launches - but the image file that I clicked on does not open.  I like to be able to find a file using Windows Explorer (

  • DVD's to IPAD2 via MAC 10.4.11?

    I am wanting to rip and copy DVD's to my new IPAD2 from my MAC PC software version 10.4.11. Can anyone recommend easy to use software to achieve this?

  • IDOC configuration problem

    Hi, We are having problem processing intercompany billing. We have successfully sent the Outbound IDOC, but the Inbound IDOC always comes to "LS//D02CLNT300". We have created the following: 1.Partner Type: KU    Partner No: 60001    Outbound Paramete