Getting TNS-1150 error
The tnsname.ora file is
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
The listener.ora file is:
LISTENER_RMSDEV =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.187.152.109)(PORT = 1525))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.187.152.109)(PORT = 1523))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/OracleDB10g)
(PROGRAM = extproc)
When I start the listener LISTENER_RMSDEV, it starts successfully.
But when I start the listener SID_LIST_LISTENER it throws this error:
LSNRCTL> start SID_LIST_LISTENER
Starting /oracle/OracleDB10g/bin/tnslsnr: please wait...
TNSLSNR for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production
System parameter file is /oracle/OracleDB10g/network/admin/listener.ora
Log messages written to /oracle/OracleDB10g/network/log/sid_list_listener.log
TNS-01150: The address of the specified listener name is incorrect
Listener failed to start. See the error message(s) above...
LSNRCTL>
What can be the possible reason?
SID_LIST_LISTENER is a list of SID that the listerner will be serving, so if I want to have more than one database that use this listener I could do this
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = hr2)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_DESC =
(SID_NAME = hr)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
And I'll be using this listener for PLExtProc (process need for the database) and two databases HR and HR2, when you use lsnrctl start LISTENER it will look inside $OH/network/admin for any file callet listener.ora and will start the listener acording to the info contained in that file.
Hope this helps.
Similar Messages
-
Guys,
I get TNS-12500 error whenever I tried to connect to my Oracle Instance
C:\>sqlplus /nolog
SQL*Plus: Release 9.2.0.6.0 - Production on Mon Feb 16 17:42:46 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn /@oradev as sysdba
ERROR:
ORA-12500: TNS:listener failed to start a dedicated server process
i then tried to restart the listener services but I get the following message
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 16-FEB-2009 17:39:
56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=amcad3)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Produc
tion
Start Date 16-FEB-2009 13:19:14
Uptime 0 days 4 hr. 20 min. 42 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File C:\oracle\ora92\network\admin\listener.ora
Listener Log File C:\oracle\ora92\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<>)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<>)(PORT=2100))(Presen
tation=FTP)(Session=RAW))
Services Summary...
Service "OraDev" has 1 instance(s).
Instance "OraDev", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 16-FEB-2009 17:40:
30
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<>)(PORT=1521)))
Services Summary...
Service "OraDev" has 1 instance(s).
Instance "OraDev", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:5
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
I have checked listener logs and thsi is what I see
16-FEB-2009 17:41:44 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=OraTEST)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=LP-AB)(USER=abell))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.16.67.112)(PORT=3304)) * establish * OraTEST * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
16-FEB-2009 17:41:54 * ping * 0
16-FEB-2009 17:42:11 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=OraDev)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=LP-AB)(USER=abell))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.16.67.112)(PORT=3306)) * establish * OraDev * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
16-FEB-2009 17:42:53 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=OraDev)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=AMCAD3)(USER=scelamkoti))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.53)(PORT=20980)) * establish * OraDev * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
------ Entries from sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
------ listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = OraDev)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = OraDev)
Any suggestions and inputs would help
ThanksHi..
On the server where the database resides..
go to START -->RUN --> services.msc --> Look at "OracleService" and "OracleStart". These two services are followed by your SID name.These services should be started.
Check for OraclexxxxTNSListener -- it must be started.
HTH
Anand -
Most of the time my customers sqlnet connections work just fine. Every day or so they get TNS-12545 errors between their servers and databases and across database links for about a minute or two and then things go back to normal. The errors occurr at random times.
We are looking at network and server things that might cause a slow response.
This is Oracle 10.
Are there any specific oracle net parameters that would provide a workaround to avoid this problem?Most of the time everything is okay but once or twice per week an error occurs and the user gets TNS-12545 errors.
This is Oracle 10. I can't post the configuration files.
I think I need something in the OracleNet configuration that would cause OracleNet to wait a little longer on the connection. -
TNS Timeout Error with both 32bit and 64bit drivers installed
I have a server running WIndows 2008 64bit and SQL Server 2012 64bit. I have both the 32bit and 64bit Oracle ODBC drivers installed. 32bit is for SSIS and SSRS uses 64bit. I have an ODBC connection setup for both the 32bit and 64bit. I have the datasources setup for the 64bit and when I test it it works. When I go to run a query I get TNS timeout errors. Any ideas?
Thank you very much, Curt!
It's right: When the 64bit version is running, then the PSDs will be opened by this.
But the configuration under "Bridge Edit/preferences/file type assoiciatons" has the same result as under the "Windows/Systemcontrol/Standardprograms": Never they show the name "Adobe Photoshop.exe (64bit)" - only "Adobe Photoshop.exe" In both cases (Bridge and systemcontrol) I have the possibility to choose the "right" Photoshop.exe by going to the right file (32bit OR 64bit), but the name of the .exe is ever the same: Only "Adobe Photoshop.exe". There is no difference.
And so even if the 64bit version is preferred (in Bridge), the PSD-files will be opened in the 32bit-version, when no one of both versions is running.
But - so or so - you have given me a way to solve my basic-problem!
And when I find the time for experiments, I will show what happens, when I rename the 64bit-exe to "Adobe Photoshop64.exe" to get two different filenames for Photoshop in the Windows-System. (I'm not shure if this will function: When in the Photoshop-System are intrinsic lnks/references to "Photoshop.exe", then I will have no success! Therefore I have to make a HDD-Clone with the whole Windows-System, all Apps and my Working-data before I try to rename. Perhaps there is "no way back to the activation" after renaming the .exe ...
Thank you and kind regards,
Oh-Mann -
TNS-12518 error while trying to fetch data from SQL Server
Hi everyone,
I'm trying to establish connectivity from Oracle 10.2 server to a SQL Server 2005. These are the server details
DOVER - This is where I installed Oracle Gateway for SQL Server. There's already an Oracle home in this server and I have used the existing listener for the incoming connections
LUNDY - This is where my actual Oracle server resides
HEBRIDES - This is where SQL Server 2005 instance resides, the database name is TRACKIT90
I've set everything as explained in Oracle documentation http://download.oracle.com/docs/cd/B19306_01/gateways.102/b14270/ch2.htm#i1005694 but in the end I'm getting an TNS-12518: TNS:listener could not hand off client connection when I run a test query and this is what it says in the listener.log of DOVER
01-MAR-2010 15:33:19 * (CONNECT_DATA=(SERVICE_NAME=tg4msql)(HS=OK)(CID=(PROGRAM=w:\oracle\product\10.2.0\db_1\bin\ORACLE.EXE)(HOST=LUNDY)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.0.0.58)(PORT=3887)) * establish * tg4msql * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
My initialization parameter under \\ORACLE_HOME\tg4msql\admin of gateway installation in DOVER is as below:
HS_FDS_CONNECT_INFO=hebrides.TRACKIT90
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
The listener.ora of the active listener in DOVER has the following lines, by the way this listener does not reside on the same ORACLE_HOME as the gateway's ORACLE_HOME but it is the current active listener in the server. The listener has also been stopped and started:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dover)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_LISTENER =
(SID_DESC =
(SID_NAME = tg4msql)
(ORACLE_HOME = E:\oracle\product\10.2.0\tg_1)
(PROGRAM = tg4msql)
The following entry has been added to the tnsnames.ora in LUNDY server where my actual Oracle database resides.
TRACKIT_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DOVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = tg4msql)
(HS = OK)
And finally a database link is created by using the below DDL statement:
CREATE DATABASE LINK "DLINK" CONNECT TO "username" IDENTIFIED BY "password" USING 'TRACKIT_DATA';
When I do a select statement on one of the tables of TRACKIT database by using the following query I got the TNS-12518 error with above details
select * from announcement@dlink;
I would appreciate any help and also please let me know if I missed out any details.
Thanks.This is the output comes with the "lsnrctl service listener" command on DOVER server
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-MAR-2010 11:48:55
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "STD81" has 1 instance(s).
Instance "STD81", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:5 refused:0
LOCAL SERVER
Service "STD81" has 1 instance(s).
Instance "std81", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:4234 refused:0 state:ready
LOCAL SERVER
Service "STD81_XPT" has 1 instance(s).
Instance "std81", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:4234 refused:0 state:ready
LOCAL SERVER
Service "tg4msql" has 1 instance(s).
Instance "tg4msql", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:22
LOCAL SERVER
The command completed successfully -
I am getting the following error at Import ABAP phase ...
Dear All,
I am getting the following error at Import ABAP phase when performing the system copy function (Import) via ./sapinst ( OS - LINUX and DATABASE-ORACLE 10g)...
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/RXT/SYS/exe/run/R3load: START OF LOG: 20090102154030
/usr/sap/RXT/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/usr/sap/RXT/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Apr 1 2006 00:08:29
/usr/sap/RXT/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/RXT/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/RXT/SYS/exe/run/R3load: END OF LOG: 20090102154030
Thanx,
AmitDear Juan,
Trans.log is ;
isrxi:rxtadm 7> cat trans.log
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 02.01.2009 - 16:45:09
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Jan 2 16:45:09 2009 62 0.000062
4 ETW000 [dev trc ,00000] db_con_init called 13 0.000075
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 21 0.000096
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/RXT/SYS/exe/run/dboraslib.so' ...
4 ETW000 26 0.000122
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/RXT/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 9099 0.009221
4 ETW000 [dev trc ,00000] Library '/usr/sap/RXT/SYS/exe/run/dboraslib.so' loaded
4 ETW000 16 0.009237
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/RXT/SYS/exe/run/dboraslib.so
4 ETW000 30 0.009267
4 ETW000 [dev trc ,00000] Version of '/usr/sap/RXT/SYS/exe/run/dboraslib.so' is "700.08", patchlevel (0.46)
4 ETW000 42 0.009309
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/RXT/SYS/exe/run/dboraslib.so
4 ETW000 21 0.009330
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/RXT/SYS/exe/run/dboraslib.so
4 ETW000 25 0.009355
4 ETW000 [dev trc ,00000] New connection 0 created 16 0.009371
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 21 0.009392
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 17 0.009409
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 15 0.009424
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 16 0.009440
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 195 0.009635
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 1567 0.011202
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 14 0.011216
4 ETW000 [dev trc ,00000] Connecting as /@RXT on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 15 0.011231
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 17 0.011248
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x9342150 0x9349ba0 0x935a298
4 ETW000 16 0.011264
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 15 0.011279
4 ETW000 [dev trc ,00000] Allocating server context handle 11 0.011290
4 ETW000 [dev trc ,00000] Attaching to DB Server RXT (con_hdl=0,svchp=0x935a1c8,svrhp=0x935c4a8)
4 ETW000 63 0.011353
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 1787 0.013140
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 16 0.013156
4 ETW000 [dev trc ,00000] Try to connect with default password 46 0.013202
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@RXT on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 15 0.013217
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.013233
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x9342150 0x9349ba0 0x935a298
4 ETW000 15 0.013248
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x935c4a8)
4 ETW000 14 0.013262
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x935a1c8,srvhp=0x935c4a8)
4 ETW000 13 0.013275
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x935c4a8 20 0.013295
4 ETW000 [dev trc ,00000] Allocating server context handle 20 0.013315
4 ETW000 [dev trc ,00000] Attaching to DB Server RXT (con_hdl=0,svchp=0x935a1c8,svrhp=0x935c4a8)
4 ETW000 25 0.013340
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 430 0.013770
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 16 0.013786
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 431]
4 ETW000 85 0.013871
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
4 ETW000 15 0.013886
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'RXT'"
isrxi:rxtadm 8>
Regards,
Amit -
Newbie : Problem starting OPG for IBM MQseries: TNS-00530, Error Code 2
Hi All
First of all, if this is the wrong place to post this question, I apologize.
I have installed a new installation of Oracle 9.2.0.1 and at a separate home location the OPG for IBM MQSeries for 9.2.0.1 off the same bits.
The configuration said that the default SID of PG4MQS92 would be setup since I was using a local MQ queue manager but I didnt see any entries in the listener.ora or the tnsames.ora so added the following.
listener.ora
(SID_DESC =
(SID_NAME = pg4mqs92)
(ORACLE_HOME = C:\Software\oracle\pg4mqs92)
(PROGRAM = pg4mqs92)
tnsnames.ora
ORACLE_QM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = testmachine)(PORT = 1521))
(CONNECT_DATA =
(SID = pg4mqs92)
(HS=OK)
When I ran tnsping on ORACLE_QM it was resolved. But when I start the putsample.sql program after importing all the required packages using the pgmdeploy9.sql script I get the following output.
DECLARE
ERROR at line 1:
ORA-04052: error occurred when looking up remote object
[email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
ORA-02063: preceding 2 lines from PG4MQ
In the listener.log I see the following error
07-DEC-2005 07:34:19 * (CONNECT_DATA=(SID=pg4mqs92)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.100)(PORT=1271)) * establish * pg4mqs92 * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
I noticed that during the install a boot file for the pgm4mqs92 SID was not found anywhere. Is it maintained in the registry, if so where ?
If the boot file is missing is there a sample I can use and where do I need to put it ?
Am running on Windows XP Professional.
Have been stuck with this a while and cannot find any information on this, so any help would be appreciated.
Thanks
- DeepakI am getting the same error while starting or stopping the listener
LSNRCTL> start CSCLIST
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL> stop CSCLIST
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CSCINDAE708070)(PORT=152
2)))
NL-00303: syntax error in NV string
TNS-01153: Failed to process string: (DESCRIPTION=(CONNECT_DATA=(CID=(PROGRAM=)
(HOST=)(USER=Manager(REMOVE)))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=CSCLIST)(VERS
ION=186646784)))
Pls help
Listener.ora:
# listener.ora Network Configuration File: D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
CSCLIST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CSCINDAE708070)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
SID_LIST_CSCLIST =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1\bin\oraclr11.dll")
ADR_BASE_CSCLIST = D:\Sagaya\11gDBhome -
Oracle 10g installing on Oracle EL, getting ORA-12157 error?
My boss is getting really impatient. I have tried installing Oracle 10g on... Oracle EL, CentOS 4, Fedora 4, Fedora 5, and I get the same error on them alll...
ORA-12157: TNS: internal network communication error
This occurs during the end phase of the installation, when it says "Clone database creation". Network seems to be working, can ping the server, static IP, all that?
Any help appreciated, I've been working on this for 5 days.
JonVerbatim, this error means:
ORA-12157: TNS:internal network communication error
Cause: Internal error during network communication.
Action: Not normally visible to the user. For further details, turn on tracing and reexecute the operation. If error persists, contact Worldwide Customer Support.Have you met all requirements before proceeding with installation? Do you have all required patches? Is there any warnng during the prerrequisites verifying routine? Is there any outstanding issue recorded on your install log file?
I suggest you, after verifying above points, to go ahead wiht a software only installation, next, using the network and databse assistants perform a network configuration and a database creation, this way you'll be able to isolate the source of the problem and go ahead with a specific troubleshootig. -
Need help trouble shooting Database Gateway for MS SQL Server setup, getting ORA-28546 error
Dear All,
I am trying to setup Oracle Database Gateway for MS SQL Server(I don't have admin access to the MS SQL Server). When I try to test the dblink connection, I get the following error.
I issued select * from dual@xyz;
ORA-28546: connection initialization failed, probable Net8 admin error
ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=dg4msql)))
ORA-02063: preceding 2 lines from xyz
28546. 0000 - "connection initialization failed, probable Net8 admin error"
My setup is the following.
1. Oracle 11gR2 running on Oracle Linux 6, the same version gateway is installed on the same server, but different home directory.
2. Oracle DB home directory is /u01/app/oracle/product/11.2.0/dbhome_1, gateway home directory is /u01/gateway.
3. I use the same listener.ora file for both the db and the gateway.
4. the contents of my listener.ora, tnsnames.ora and the initdg4msql.ora are below.
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
#(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
mssql =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME=db.abc.com.tw)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME=orcl)
SID_LIST_mssql =
(SID_LIST =
(SID_DESC =
(SID_NAME=dg4msql)
(ENVS=LD_LIBRARY_PATH=/u01/gateway/dg4msql/driver/lib:/u01/gateway/lib)
(PROGRAM_NAME=/u01/gateway/bin/dg4msql)
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.abc.com.tw)
dg4msql =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP) (HOST=localhost)(PORT = 1521))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
/u01/gateway/dg4msql/admin/initdg4msql.ora
HS_FDS_CONNECT_INFO=[192.168.0.1]:1433//XIETEST
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=255
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
dblink was created using statement below.
CREATE DATABASE LINK "xyz.abc.COM.TW"
CONNECT TO SA IDENTIFIED BY
USING 'dg4msql';
Couple more things, that I have done to check the work above.
[oracle@db admin]$ ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_seq=1 ttl=61 time=7.61 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=61 time=7.41 ms
^C
--- 192.168.0.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1818ms
rtt min/avg/max/mdev = 7.417/7.516/7.615/0.099 ms
[oracle@db admin]$ tnsping dg4msql
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 11-SEP-2013 10:53:11
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP) (HOST=localhost)(PORT = 1521)) (CONNECT_DATA=(SID=dg4msql)) (HS=OK))
OK (0 msec)
[oracle@db admin]$ lsnrctl status mssql
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 11-SEP-2013 10:54:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias mssql
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 11-SEP-2013 10:09:46
Uptime 0 days 0 hr. 44 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/db/mssql/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Obviously, I would like to get this setup to work, but I also have couple other questions regarding this setup.
1. When installing the gateway, it asks to run the root.sh script. the root.sh script as for the following.
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
is the above answer correct?
Thanks for reading.Dear Klaus,
I did start a new SQL*PLUS session
The output of /u01/gateway/bin/dg4msql is
[oracle@db log]$ /u01/gateway/bin/dg4msql
Oracle Corporation --- WEDNESDAY SEP 11 2013 14:45:06.604
Heterogeneous Agent Release 11.2.0.1.0 - 64bit Production Built with
Oracle Database Gateway for MSSQL
The output of env is
HOSTNAME=db.abc.com.tw
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
ORACLE_UNQNAME=orcl
TMPDIR=/tmp
QTDIR=/usr/lib64/qt-3.3
QTINC=/usr/lib64/qt-3.3/include
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/dbhome_1/lib:/lib:/usr/lib
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.tbz=01;31:*.tbz2=01;31:*.bz=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=01;36:*.au=01;36:*.flac=01;36:*.mid=01;36:*.midi=01;36:*.mka=01;36:*.mp3=01;36:*.mpc=01;36:*.ogg=01;36:*.ra=01;36:*.wav=01;36:*.axa=01;36:*.oga=01;36:*.spx=01;36:*.xspf=01;36:
ORACLE_SID=orcl
ORACLE_BASE=/u01/app/oracle
ORACLE_HOSTNAME=db.abc.com.tw
MAIL=/var/spool/mail/oracle
PATH=/u01/app/oracle/product/11.2.0/dbhome_1/bin:/usr/sbin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/oracle/bin
PWD=/home/oracle
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HISTCONTROL=ignoredups
SHLVL=1
HOME=/home/oracle
TMP=/tmp
LOGNAME=oracle
QTLIB=/usr/lib64/qt-3.3/lib
CVS_RSH=ssh
CLASSPATH=/u01/app/oracle/product/11.2.0/dbhome_1/jlib:/u01/app/oracle/product/11.2.0/dbhome_1/rdbms/jlib
LESSOPEN=|/usr/bin/lesspipe.sh %s
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
G_BROKEN_FILENAMES=1
_=/bin/env -
Not able to connect from linux client. Get TNS-12560: TNS:protocol adapter
Hi,
Details of the configuration :
Server:
RHEL4: 10.2.0.3 Oracle Enterprise Database installed.
SID = orcl, port 1521.
Client:
RHEL4 : 10.2.0.x client installed.
Whenever, I try to connect from Client to server, I get following error:
For tnsping orcl I get following error :
TNS-12560: TNS:protocol adapter error
I get the same error even, If I do a sqlplus "scott/tiger@orcl" with TNS_ADMIN, ORACLE_HOME everything set correctly.
On the server, I am able to connect to the same db without any problem. I have following env set ORACLE_HOME, TNS_ADMIN and PATH. Here, I am trying to make sure that the sqlplus goes through the listner.
Any help is appreciated. Please let me know if you need more information.
Thanks much.
V.ChandrashekarEnsure your listener is properly configured and started. Check the listener's address and verify you can tnsping it with the tnsping command:
tnsping orcl
On the other side, make sure your tnsnames.ora file on the client side has properly configured the address where the listener is located.
~ Madrid -
TNS listener error "ORA-12514: TNS:listener..."
Hi all,
I have a problem with my listener on Oracle 11.2.0.2.
I am more of a developer than a DBA, and I do not have a DBA to consult, so I hope you can address me, please.
I have 2 DB instances running on the same machine ORCL and ORCL2 on port 1521, both using the same listener "LISTENER" as well on port 1521.
In my TNSnames I had to add yesterday as well a new entry to a DB (ORCL3) hosted on a different machine.
Since then, I can connect to ORCL and ORCL3 without problem via sqlplus, but I get the below error when I connect to ORCL2:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
I think the answer is to have to separate listeners for ORCL and ORCL2, but I have had several failed attempts.
Can you please advise on what I need to do? I have looked at various sites, but if you are not too experienced with listeners, they are not really very clear.
ThanksHi, thanks.
ORANAMES:
# tnsnames.ora Network Configuration File: C:\oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ORCL2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl2)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.xxx.xxx.net)
ORCL3 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1.2.3.4)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.2.3.4)
STATUS:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 28-JAN-2012 10:14:06
Uptime 0 days 2 hr. 19 min. 26 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File C:\oracle\diag\tnslsnr\xxx\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.xxx.xxx.net" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.xxx.xxx.net" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully -
Get ORA-12560 error while accessing 11g database
Database version: 11.2.0.1.0
This is a development database running on CentOS. We had setup this database recently and everything has been fine. Today I noticed that when I connect to the database from remote, I get the following error -
ORA-12560: TNS:protocol adapter error
I'm able to get in to the database after logging in directly into the database server via putty. I have stopped & restarted the database, but with no help. I have checked the environment variables (ORACLE_HOME, ORACLE_SID) and they seem to be fine.
Can you please help on what might be the problem here? Is this something to do with some change in the OS firewall setting?
Edited by: museshad on Dec 20, 2012 12:44 PMlsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-DEC-2012 13:27:55
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 27-AUG-2012 16:50:42
Uptime 114 days 20 hr. 37 min. 13 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/xxxx/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxx)(PORT=1521)))
Services Summary...
Service "orcl.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.ENTERPRISENET.ORG)
) -
Hi,
I am getting the below error with Oracle 10.2 what might be the solution for this
Connecting...ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
I am unable to connect to the database even using conn /as sysdba through command prompt.
Please suggest me
Thanks
raoHi,
You should be able to see the "Services" that your listener responds to using your LSNRCTL command. If you use LSNRCTL SERVICES from your $ORACLE_HOME/bin, you can see the instances that re ready & the services.
You an use one of these services & try connecting to your Database.
Regards,
Sandeep -
Suddenly getting ORA-12514 error Oracle 11gr2
I installed Oracle 11g r2 fine, had 2 databases (se3 and mydb, both have db_domain .orcl i.e. mydb.orcl and se3.orcl) running on it fine till yesterday. but suddenly im getting ORA-12514 error (TNS:listener doesn't know of service requested in connect descriptor)..
My tnsnames.ora file:
# tnsnames.ora Network Configuration File: G:\oracledb\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER_MYDB =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
MYDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = mydb.orcl)
SE3 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = se3.orcl)
LISTENER_SE3 =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
and my listener.ora file is as follows:
# listener.ora Network Configuration File: G:\oracledb\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = G:\oracledb\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:G:\oracledb\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = G:\oracledb
* i have both of databases up and running(confirmed through administration assistant), the listener is up.. im able to execute "tnsping mydb/se3".. i'm not able to connect to either one of them through sqlplus/sql developer.. The result of "lsnrctl service" is as follows:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
PLEASE HELP ME FRIENDS!! I HAVE A PROJECT DUE IN EARLY OCTOBERHi,
Instead of this:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = G:\oracledb\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:G:\oracledb\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
have the following in your listener file
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = G:\oracledb\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:G:\oracledb\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = mydb)
(ORACLE_HOME = G:\oracledb\product\11.2.0\dbhome_1)
(SID_DESC =
(SID_NAME = se3)
(ORACLE_HOME = G:\oracledb\product\11.2.0\dbhome_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
Also, dont have 'localhost' in your listener.ora file, provide the actual IP or hostanme. NEVER YOU should have
localhost.
Restart listener and try.
Thanks &
Best Regard, -
MARS - Oracle TNS listener errors
Anyone familiar with this:
[pnadmin]$ pndbusage
Program aborted due to: ORA-12541: TNS:no listener
MARS was fine before the holiday weekend. When I came back, I was looking at the summary page and the graph wasn't being drawn. I SSH'd to MARS and did the above.
While SSH'd to MARS (and my HTTPS session still open) I did a reboot and I still get the same error. Also, now when I HTTPS to MARS I get a login page, but the url is: https://10.6.184.116/logout.jsp
The username/password fields and login button are in the upper left corner of the browser window, not in the middle like normal.
So, now I have two problems. The first being my TNS listener error and the second being that I can't log in. It wants me to log out first...ugh.
Thanks,
BobThis sounds like a known issue and if memory serves a developer will need to login and do something, so you'll need to open a TAC case.
Here is the link:
http://www.cisco.com/en/US/products/ps6241/products_field_notice09186a008070fcaf.shtml
Maybe you are looking for
-
Should arch symlink /usr/lib64 to /usr/lib?
After spending two hours debugging a bloody java applet accessing a smart card trough pcsclite (Buypass used for different services in Norway, including government services) it turns out it failed because it ONLY looked for 64bit libs in /usr/lib64.
-
New Set of Books Required?
We are working on release -11.5.10.2 The structure is 1 OU,Multiple SOB since the currency is different,No MRC. Due to certain additional business activity client want to split the business and hence thinking to create a new SOB with all the 3C's sam
-
Wi Fi Disabled while restoring iPhone 3G with 3.1.2 Software
I am having one apple iPhone 3G with me .recently I am restored the phone in Factory default settings and install the new software which is 3.1.2.Now the phone is locked and I am not able to unlock the phone,because the Wi Fi is not enabled.Showing (
-
Should I have to explicitly install CA certs that are already preinstalled in iOS?
Hi all, I'm trying to understand how iOS deals with certificates and I'm wondering if anyone can explain a few things to me. I'm working on a system that would provide users with a personal identification certificate for authentication to various ser
-
[SOLVED] [FluxBox] Mouse can't move...
Hi, This is my first post in the forum I'm having a problem... Yesterday, everything was working perfectly in FluxBox... This morning, I started it with startx . The mouse could not move and the keyboard was not responding either! I really don't know