GETVPN design details - KS and GDOI

Hi ...
I have some doubts about designing a GETVPN solution.
I have a big network with 5 concentration points with routers 3925, this concentration points connects to central network and each one connects some reomote locations.
We are thinking to use GETVPN to make IPSec tunnels between remote locations and central network, but checking the design of GETVPN we are not sure about:
- How to size the KS servers. We are considering two routers but how big or how much memory they must have ?
- Is it possible to configure differents GDOI groups in KS ? We are going to have almost 5 or 6 concentrations routers, if we configure ACLs they are going to be so big to propagate among all routers. In all deployments that I'll worked allways I configured a central point with remote offices but using just one GDOI. is it possible to create differents GDOI groups for separate the ACLs ?
Thanks in advance .... I'll really appreciate the suggestions ...
Guillo.

Guillo,
KS can serve mutliple groups configured (different policies) and GM can be subsribed to multiple groups (you differentiate based on identity number and interface crypto map is applied to).
KSes should scale better with multicast rekey (no surprise) - for a typical deployment going below 3800 is not recommended (unless you have a small network with less than 200 GMs).
Marcin

Similar Messages

Designing the consolidated and line item report for specific material

Hi
i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost) ) in one report.
Another report will give same for consolidated values of financial loss, utiliy consumption.
so how can i design the consolidated and lineitem details report for each material. pls let me know
kumar

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

Creative Suite 5.5 Design Standard Student and teacher edition-Reinstall

I need to know where to go on the Adobe site to re install the above titled software.
When I download and try to install the software it will not allow me to fill in the serial number. It shows the space but it will not allow me to enter my serial number.
I think the problem may be that I am not going into the student/ teacher portal for this product.
I need your help please.
Thank You!
Gordon

I have the serial. I get to point of installing, but the serial is not allowed to be entered. Maybe the teacher edition is between product than from the general public. Thanks! Gordon
Sent from Yahoo Mail on Android
From:"Jeff A Wright" <[email protected]>
Date:Tue, Mar 3, 2015 at 5:14 PM
Subject:[Student and Teacher Edition Information] Creative Suite 5.5 Design Standard Student and teacher edition-Reinstall
Creative Suite 5.5 Design Standard Student and teacher edition-Reinstall
created by Jeff A Wright in Student and Teacher Edition Information - View the full discussion
Gordon are you entering the serial number registered under your account at http://www.adobe.com/? You can find additional details on how to locate your registered serial number at Find your serial number quickly.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7249072#7249072 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7249072#7249072
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Student and Teacher Edition Information by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Design Details

Hi Experts,
When trying to create a new view in the Design Details, configuring Hierarchies > Organization Structure, I get the following error when I choose to Add Section: "Problem retrieving XML data: getPageHandler()" .
We are using the Live connection of Nakisa.
Has anyone faced such a problem?
Thank you very much in advance,
Evaggelia

Hi Evaggelia,
It may be that you need to code this in XML as it is trying to retrieve data from SAP in Live mode and this is not possible. It may also be that you have lost connection to the server (if you are doing this from a local machine).
Are there any errors in the log file?
Many thanks,
Luke

How to Design User Accounts and Groups for Human Task

Hi All,
I have a requirement wherein we have a group of people to whom tasks get assigned. Details are below
Assume
PO- Purchase Order
IN- Invoice
CL1 - Client 1
CL2 - Client 2
CL3 - Client 3
REP1 - User 1
REP2 - User 2
REP3 - User 3
APP1 - Approver 1
APP2 - Approver 2
APP3 - Approver 3
1. There are two groups of people say PO_Team and IN_Team.
2. REPx are the folks who are in the IN_Team. They handle monitor invoices and run reports on them (READ - Only)
3. APPx are the folks who are in the PO_team. They approve order and sometimes modify them (READ-WRITE)
4. CLIx are the clients each of whom send PO and expect IN in return
5. CLI1 - APP1- REP1 together handle one client.
Now the requirement is something like this
1. APP1 must be able to see the PO and IN only from CLI1
2. APP1 must be able to see editable view of PO from CLI1
3. APP1 must be able to see red only view of IN from CLI1
4. REP1 must be able to see the PO and IN only from CLI1
5. REP1 must be able to see read only view of IN from CLI1
6. REP1 must be able to see read only view of PO from CLI1
7. In exception cases APP1 can assign a PO from CLI1 to APP2
Can someone help me in the design of groups and permissions for this?
TIA

Groups are the way to go. Every Human Task can be assigned to either a user or a group or a user and a group. Select the last option so that it goes to a particular user but also to a group. That way anyone in the group can approve these tasks though it is sent to one particular users list. Anyone from that group can pick that task up and approve it

Some problem about SAP R/3 ~ I need some detail solutions and suggests

I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
 Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
 Problem 1.2: In DOS, startsap command cannot start SAP R/3.
 Problem 1.3: Oracle 9i database automatically shutdown by itself.
 Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.
Problem 2: Problems in User Maintenance and Security of the SAP R/3 System
 Problem 2.1: Super user account password was lost (e.g. SAP* password was lost)
 Problem 2.2: Super users DDIC and SAP* were dropped in table usr02 in Oracle.
 Problem 2.3: Some users have been locked or deleted by an ABAP programmer who has been granted with almost superuser profiles. For example, an ABAP programmer has been granted a profile of SAP_ALL and SAP_NEW but the system administrator would like to restrict all programmers form using SU01, SU02, SM01, so that no programmers can maintain other user's accounts.
Problem 3: Problems in the configuration of client copy
 Problem 3.1: A copied client from the Client 000 cannot be customized.
 Problem 3.2: No sample data in IDES after a successful client copy.
 Problem 3.3: Logging on without being authorized. A new client is created and client copied and transported successfully. However, anyone can log into the system using user SAP* with the default password PASS.
Problem 4: Problems in the installation of SAP R/3 Server
 Problem 4.1: Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
 Problem 4.2: A network card of a server was faulty and it was replaced by a new network card but the SAP R/3 license was expired.
 Problem 4.3: You would like to reinstall SAP R/3 on a server which has previously installed with SAP R/3 but the same error message appears during the re-installation.
Problem 5: Problems in the backup and recovery of Oracle 9i Database
 Problem 5.1: A redo log file was lost and the database could not be started.
 Problem 5.2: A group of data files were accidentally deleted and the database could not be started.
 Problem 5.3: Both the online redo log files and archived redo log files have been damaged.
Problem 6: General problems regarding the general operations and the connection to the SAP R/3 System
 Problem 6.1: After a reboot of the Windows 2003 Server, SAP service is not automatically started.
 Problem 6.2: Some users complained that the performance of SAP R/3 is really very slow.
 Problem 6.3: A user complained that his/her password was correct but he/she could not lock on the client because it was locked.

Problem 2
2.1 If user account of the sap* is lost u can retrive by loging into os level as sidadm type this command
DELETE SAP<sid>.USR02 where BNAME='SAP*' AND MANDT=100
This 100 is the client in which u want to delete the sap*
after that restart the server and login as sap* with the default password as pass
there is also another way of doing this if needed u can catch me at [email protected]

I just purchased a mac, I've made an apple id. But now when i try to update my mac. I need to login to itunes stroe.Whenever i try that i can login, then i need to confirm my details. And suddenly the mail adress is no longer valid.

I just purchased a mac, I've made an apple id. But now when i try to update my mac. I need to login to itunes stroe.Whenever i try that i can login, then i need to confirm my details. And suddenly the mail adress is no longer valid.
How do I solve this problem?

You've posted to the iTunes Match forum, which your questions do not appear to be about. Perhaps you would get better help by posting in the iTunes for Mac forum.

Delete Crystal Report Design in Report and Layout Manager

Hi All
How to permanently delete a customised Crystal Report Design imported in Report and Layout Manager?
There is no Delete button at all unlike Form Design?
Kedalene Chong

Hi Nagarajan
Please see image attached, already login as superuser but there is no Delete button for imported Crystal Report Design in Report and Layout Manager.

How to read text and it's font details (Family and size) using Acrobat plugin?

Hello,
I have query about reading PDF, I wanted to extract text and it's font details (Family and size) using Acrobat plugin. How can I achieve that?
Any suggestions are welcome.
Thanks
Rohit Shinde

Look at the samples in the SDK around PDFEdit and the PDEdit APIs.

Oracle 10g RAC design with ASM and OCFS

Hi all,
I have a question about a proposed Oracle 10g Release 2 RAC design for a 2 node cluster.
ASM can store database files but not Oracle binaries nor OCR and voting disk. As such, OCFS version 1 does not support a shared Oracle Home. We plan to use OCFS version 2 with ASM version 2 on Red Hat Linux Enteprrise Server 4 with Oracle 10g Release 2 (10.2.0.1).
For OCFS v2, a shared Oracle home and shared OCR and voting disk are supported. My question is does the following proposed architecture make sense for OCFS v2 with ASM v2 on Red Hat Linux 4?
Oracle 10g Release 2 on Red Hat Enterprise Linux Server 4:
OCFS V2:
- shared Oracle home and binaries
- shared OCR and vdisk files
- CRS software shared OCFS v2 filesystem
- spfile
- controlfiles
- tnsnames.ora
ASM v2 with ASMLib v2:
Proposed ASM disk groups:
- data_dg for application data
- backupdg for flashback and archivelogs
- undo_rac1dg ASM diskgroup for undo tablespace for racnode1
- undo_rac2dg ASM diskgroup for undo tablespace for racnode2
- redo_rac1dg ASM diskgroup to hold redo logs for racnode1
- redo_rac2dg ASM diskgroup to hold redo logs for racnode2
- temp1dg temp tablespace for racnode1
- temp2dg temp tablespace for racnode2
Does this sound like a good initial design?
Ben Prusinski, Senior DBA

OK Tim, thanks for advices.
I think Netbackup can be integrated with RMAN but I don't want to loose time on this (political).
To summarize:
ORACLE_HOME and CRS_HOME on each node (RAID1 and NTFS)
Shared storage:
Disk1 and disk 2: RAID1: - Raw partition 1 for OCR
- Raw partition 2 for VotingDisk
- OCFS for FLASH_RECOVERY_AREA
Disk3, disk4 and disk5: RAID 0 - Raw with ASM redundancy normal 1 diskgroup for database files.
This is a running project here, will start testing the design on VMware and then go for production setup.
Regards

I just started using fire fox and I cant figure out how to add a new folder to my bookmarks. Can anybody explain how in detail (I'm bad with computers so I need real detail) Please and thank you. :)

I just started using fire fox and I can't figure out how to add a new folder to my bookmarks.
Can anybody explain how in detail (I'm bad with computers so I need real detail)
Please and thank you. :)

If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I need some detail solutions and suggests about below these problems ?

I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
Problem 1.2: In DOS, startsap command cannot start SAP R/3.
Problem 1.3: Oracle 9i database automatically shutdown by itself.
Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.

3.1 - If you client copy from client 000, you need to go to SCC4 and set the client to customizing chnages allowed;
3.2 - If you do a client copy from client 800 (the one that SAP delivers data in) you should have data. Client 000 is empty (almost).
3.3 - You should be able to change the password of SAP* PASS user.
I am not sure which version you are dealing with, but ERP2004 and ERP2005 allow you to change the password suring installation.
Also, there is a parameter that can be maintained that allows you to log on as SAP*. If you set as not available, no one can log on.
Hope it helps,
Leonardo De Araujo

I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong

Hi Mark,
I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong
Mick

Moving this discussion to the Downloading, Installing, Setting Up forum.
Aussimick you will want to enter in the qualifying serial number from the full version of Adobe software you purchased. You can find the serial numbers located under your account by following the steps listed in Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

I have Adobe Creative Suite 5 Design Premium (Teacher and Student Edition. I've purchased the upgrade to Adobe Photoshop CS6 - Trying to install, but it says my serial number is invalid?

I have Adobe Creative Suite 5 Design Premium (Teacher and Student Edition). I've purchased the upgrade to Adobe Photoshop CS6 - Trying to install, and it says the Adobe CS6 is valid - but only provides 'photoshop' options for entering my old serial number, rather than the adobe creative suite. How do I move past this so I can download it on my computer. I don't want to upgrade to Adobe Creative Suite 6 - as I do not need all the programs, just photoshop. From looking online, I read forums that said this was possible. Please advise

I don't want to upgrade to Adobe Creative Suite 6 - as I do not need all the programs, just photoshop.
Unfortunately that option is not possible.
You cannot upgrade a Creative Suite to a standalone product.
Creative Suites can only be upgrades to other Creative Suites.
You'll need to return Photoshop CS6 upgrade since you cannot use it.
Return, cancel, or exchange an Adobe order
Some options:
Buy a Creative Suite upgrade, or
Buy a full new copy of Photoshop CS6, or
Join the Cloud

Blank space between Detail section and Page Footer - How to remove it ?

below is the problem.
We make report as followspage header Section details
Employee Information
Report Footer
Page Footer
Other Information
whenever we run this crystal report it leaves space in between after employee information (Detail Section) and before Page Footer.We don't know its a problem of footer or any other else.
When i preview and print out the reports
it showing Detail section 10 Rows (which satisfying condition) and then Blank space and then at the bottom of page shows Page Footer (which contain 2 subreports).
Let me know if you need aditional information on this.
pls provide suggestions.

Try with this
1. Suppress any unused sections in both sureports and in the mainreport.
2. Check all the fields fits the sections. Select all the fields in the section and give align top and make all the fields of same height and make it fit to the section.
Hope this solves your problem.

GETVPN design details - KS and GDOI

Similar Messages

Maybe you are looking for